No mouse and keyboard with the L4Linux/DOpE
chenggh
chenggh04 at st.lzu.edu.cn
Thu Nov 16 11:03:49 CET 2006
On Thursday 16 November 2006 16:55, Christian Helmuth wrote:
> Hello chenggh,
>
> On Thu, Nov 16, 2006 at 07:58:52AM +0800, chenggh wrote:
> > If I setup without L4Linux. I could see a graphical interface. But the
> > mouse is always at (0,0) and i can't use the mouse anyway.
Thanks for Helmuth very much. Now my l4dope and l4linux could support the
keyboard and mouse:) I only modify the grub configuration and it is ok.
Now I have the new problem. I can't move the mouse out of the l4linux console
and it seems that the mouse movement has a range which is the border of
l4linux console.
And in the attachment there is my l4linux .config file. Please pay attention
that my l4linux is 2.6.17 not the latest version 2.6.18.
The grub configuration is as following:
title L4Linux26/Fiasco+dope
kernel (hd0,1)/boot/L4Linux/bootstrap
modaddr 0x06000000
module (hd0,1)/boot/L4Linux/main -nowait -nokdb -serial_esc -comspeed
115200 -comport 1
module (hd0,1)/boot/L4Linux/sigma0
module (hd0,1)/boot/L4Linux/roottask task modname "bmodfs" attached 4
modules
module (hd0,1)/boot/L4Linux/events
module (hd0,1)/boot/L4Linux/names --events
module (hd0,1)/boot/L4Linux/log --events
module (hd0,1)/boot/L4Linux/dm_phys --isa=0x00800000 -v --events
module (hd0,1)/boot/L4Linux/simple_ts -t 300 --events
module (hd0,1)/boot/L4Linux/rtc --events
module (hd0,1)/boot/L4Linux/l4io --noirq --events
module (hd0,1)/boot/L4Linux/l4exec --events
module (hd0,1)/boot/L4Linux/l4dope --l4io --menubar --transparency
module (hd0,1)/boot/L4Linux/loader --fprov=BMODFS linux26.cfg
module (hd0,1)/boot/L4Linux/bmodfs
module (hd0,1)/boot/L4Linux/vmlinuz26
module (hd0,1)/boot/L4Linux/linux26.cfg
module (hd0,1)/boot/L4Linux/libloader.s.so
module (hd0,1)/boot/L4Linux/libld-l4.s.so
vbeset 0x117 506070
The minicom log is as following:
log | (hd0,1)/boot/L4Linux/log: unrecognized option `--events'
log | Unrecognized option: - ?
log | Usage: (hd0,1)/boot/L4Linux/log <options>. Option list:
log | [ -h | --help ] - this help
log | [ -v | --verbose ] - verbose mode
log | [ -l | --local ] - flush to local console
log | [ -L | --nolocal ] - do not flush to local console
log | [ -s | --comport num ] - flush to specified serial interface (0)
log | [ -e | --serial-esc ] - enter kdebug on esc on serial
log | [ -b | --buffer num ] - buffered mode (0)
log | [ --flushprio num ] - priority of flusher thread (0x20)
log | [ -p | --prio num ] - priority of main thread (0x20)
names | Starting thread listening for `exit' events
simplets| Configured for 300 tasks.
rtc | Date:16.11.2006 Time:09:34:53
DMphys | DMphys memory map:
DMphys | phys. memory 0x00000000-0x1dff0000 (from L4 kernel info page)
DMphys | using 0x00100000-0x1dff0000
DMphys | Memory area Pool PS Flags
DMphys | 0x00000000-0x00100000 -- -- RESERVED
DMphys | 0x00100000-0x00134000 7 12 MAPPED
DMphys | 0x00134000-0x001cb000 -- -- DENIED
DMphys | 0x001cb000-0x002d0000 7 12 MAPPED
DMphys | 0x002d0000-0x002e3000 -- -- DENIED
DMphys | 0x002e3000-0x00400000 7 12 MAPPED
DMphys | 0x00400000-0x0043a000 -- -- DENIED
DMphys | 0x0043a000-0x009e4000 7 12 MAPPED
DMphys | 0x009e4000-0x00b80000 0 12 MAPPED
DMphys | 0x00b80000-0x00bef000 -- -- DENIED
DMphys | 0x00bef000-0x00c00000 0 12 MAPPED
DMphys | 0x00c00000-0x01000000 0 22 MAPPED
DMphys | 0x01000000-0x01080000 0 12 MAPPED
DMphys | 0x01080000-0x0108a000 -- -- DENIED
DMphys | 0x0108a000-0x01100000 0 12 MAPPED
DMphys | 0x01100000-0x0114b000 -- -- DENIED
DMphys | 0x0114b000-0x01220000 0 12 MAPPED
DMphys | 0x01220000-0x01256000 -- -- DENIED
DMphys | 0x01256000-0x01300000 0 12 MAPPED
DMphys | 0x01300000-0x0134d000 -- -- DENIED
DMphys | 0x0134d000-0x01400000 0 12 MAPPED
DMphys | 0x01400000-0x0141c000 -- -- DENIED
DMphys | 0x0141c000-0x01500000 0 12 MAPPED
DMphys | 0x01500000-0x0151b000 -- -- RESERVED
DMphys | 0x0151b000-0x01540000 0 12 MAPPED
DMphys | 0x01540000-0x0154d000 -- -- DENIED
DMphys | 0x0154d000-0x01b00000 0 12 MAPPED
DMphys | 0x01b00000-0x01b8c000 -- -- DENIED
DMphys | 0x01b8c000-0x01c00000 0 12 MAPPED
DMphys | 0x01c00000-0x06800000 0 22 MAPPED
DMphys | 0x06800000-0x068b8000 0 12 MAPPED
DMphys | 0x068b8000-0x077f2000 -- -- DENIED
DMphys | 0x077f2000-0x07800000 0 12 MAPPED
DMphys | 0x07800000-0x1b800000 0 22 MAPPED
DMphys | 0x1b800000-0x1b839000 0 12 MAPPED
DMphys | 0x1b839000-0x1dff0000 -- -- DENIED
DMphys |
DMphys | DMphys memory pools:
DMphys | pool 0 (Default memory pool):
DMphys | size: 422928KB total, 422928KB free, 32KB reserved
DMphys | 0x009e4000-0x00b80000 ( 1648KB, 2MB)
DMphys | 0x00bef000-0x01080000 ( 4676KB, 5MB)
DMphys | 0x0108a000-0x01100000 ( 472KB, 0MB)
DMphys | 0x0114b000-0x01220000 ( 852KB, 1MB)
DMphys | 0x01256000-0x01300000 ( 680KB, 1MB)
DMphys | 0x0134d000-0x01400000 ( 716KB, 1MB)
DMphys | 0x0141c000-0x01500000 ( 912KB, 1MB)
DMphys | 0x0151b000-0x01540000 ( 148KB, 0MB)
DMphys | 0x0154d000-0x01b00000 ( 5836KB, 6MB)
DMphys | 0x01b8c000-0x068b8000 ( 79024KB, 77MB)
DMphys | 0x077f2000-0x1b839000 (327964KB, 320MB)
DMphys | pool 7 (ISA DMA memory pool):
DMphys | size: 8192KB total, 8192KB free, 0KB reserved
DMphys | 0x00100000-0x00134000 ( 208KB, 0MB)
DMphys | 0x001cb000-0x002d0000 ( 1044KB, 1MB)
DMphys | 0x002e3000-0x00400000 ( 1140KB, 1MB)
DMphys | 0x0043a000-0x009e4000 ( 5800KB, 6MB)
bmodfs | Passed the following modules:
bmodfs | module "(hd0,1)/boot/L4Linux/vmlinuz26" (14475kB)
bmodfs | module "(hd0,1)/boot/L4Linux/linux26.cfg" (1kB)
bmodfs | module "(hd0,1)/boot/L4Linux/libloader.s.so" (635kB)
bmodfs | module "(hd0,1)/boot/L4Linux/libld-l4.s.so" (473kB)
io | do_args(): Disabling internal IRQ handling.
io | do_args(): Enabling events support.
io | CPU supports 8 MTRRs. Allocated:
io | 0: 00000000-20000000 ( 512MB) type WB
io | 1: 1e000000-20000000 ( 32MB) type UC
io | 2: e8000000-ec000000 ( 64MB) type WC
io | 3: e8000000-ec000000 ( 64MB) type WC
l4dope | DOpE(init): using L4 IO server
l4dope | (hd0,1)/boot/L4Linux/l4dope: unrecognized option `--menubar'
l4dope | DOpE(init): unknown option!
l4dope | DOpE(init): using transparency
loader | vmlinuz26: Starting application using libld-l4.s.so
loader | vmlinuz26,#10: Loading binary
io | PCI: Using configuration type 1
io | PCI: Probing PCI hardware
io | PCI: Probing PCI hardware (bus 00)
io | PCI: Via IRQ fixup
io | 00000000-ffffffff : PCI mem
io | e0000000-e7ffffff : PCI Bus #01
io | e0000000-e7ffffff : S3 Inc. VT8375 [ProSavage8 KM266/KL266]
io | e8000000-ebffffff : VIA Technologies, Inc. VT8375 [KM266/KL266]
Hos
io : t Bridge
io | ec000000-ec0fffff : PCI Bus #01
io | ec000000-ec07ffff : S3 Inc. VT8375 [ProSavage8 KM266/KL266]
io | ec100000-ec1000ff : Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/
io : 8139C+
io | ec101000-ec1017ff : VIA Technologies, Inc. IEEE 1394 Host
Controlle
io : r
io | ec102000-ec1020ff : VIA Technologies, Inc. USB 2.0
io | 0000-ffff : PCI IO
io | 0cf8-0cff : PCI conf1
io | d000-d0ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
io | d400-d47f : VIA Technologies, Inc. IEEE 1394 Host Controller
io | d800-d81f : VIA Technologies, Inc. USB
io | dc00-dc1f : VIA Technologies, Inc. USB (#2)
io | e000-e01f : VIA Technologies, Inc. USB (#3)
io | e400-e40f : VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/
io : A/C PIPC Bus Master IDE
io | e800-e8ff : VIA Technologies, Inc. VT8233/A/8235 AC97 Audio
Control
io : ler
loader | vmlinuz26,#10: Loading ldso
loader | vmlinuz26,#10: Starting libld-l4.s.so at 00013870 via 0000bc54
l4dope | L4INPUT: !!! W A R N I N G !!!
l4dope | L4INPUT: Please, do not use Fiasco's "-esc" with L4INPUT.
l4dope | L4INPUT: !!! W A R N I N G !!!
l4dope | serio: i8042 AUX port at 0x60,0x64 irq 12
l4dope | serio: i8042 KBD port at 0x60,0x64 irq 1
l4dope | input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
l4lx | ======> L4Linux 2.6 starting... <========
l4lx | Linux version 2.6.17-l4 (root at fiasco-desktop) (gcc version 3.4.6
(Ubu
l4lx : ntu 3.4.6-1ubuntu2)) #4 Wed Nov 15 22:47:04 CST 2006
l4lx | Binary name: vmlinuz26
l4lx | Kernel command line (4 args): earlyprintk=yes mem=256M video=l4fb
roo
l4lx : t=/dev/hda2
l4lx | Image: 00400000 - 0072e000 [3256 KiB].
l4lx | Areas: Text: 00400000 - 00642000 [2312kB] (a bit longer)
l4lx | Data: 00642000 - 0068bd8c [295kB]
l4lx | Initdata: 0068e000 - 006bf000 [196kB]
l4lx | BSS: 006c0000 - 0072c930 [434kB]
l4lx | l4lx_thread_create: Created thread 10.03 (tamer)
l4lx | Using tamed mode.
l4lx | l4env_linux_startup thread 4.
l4lx | l4lx_thread_create: Created thread 10.04 (server)
l4lx | main thread will be 10.04
l4lx | l4env_register_pointer_section: addr = 00642000 size = 512000
l4lx | sec-w-init: virt: 0x00642000 to 0x006befff [500 KiB]
l4lx | Noncontiguous region for sec-w-init
l4lx | sec-w-init: Number of physical regions: 2, 512000 Bytes
l4lx | sec-w-init: 1: Phys: 0x0141c000 to 0x01488000, Size: 442368
l4lx | sec-w-init: 2: Phys: 0x0120f000 to 0x01220000, Size: 69632
l4lx | main thread: received startup message.
l4lx | Main thread running, waiting...
l4lx | setup_l4env_memory: Forcing superpages for main memory
l4lx | Main memory size: 256MB
l4lx | Got 2048kB of ISA DMA memory.
l4lx | ISA DMA memory: virt: 0x00800000 to 0x009fffff [2048 KiB]
l4lx | ISA DMA memory: Number of physical regions: 1, 2097152 Bytes
l4lx | ISA DMA memory: 1: Phys: 0x0043a000 to 0x0063a000, Size: 2097152
l4lx | Main memory: virt: 0x00c00000 to 0x10bfffff [262144 KiB]
l4lx | Main memory: Number of physical regions: 1, 268435456 Bytes
l4lx | Main memory: 1: Phys: 0x07800000 to 0x17800000, Size: 268435456
l4lx | Filling lower ptabs...
l4lx | Done (1614 entries).
l4lx | l4lx_thread_create: Created thread 10.05 (timer.i0)
l4lx | l4lx_thread_create: Created thread 10.06 (Idler)
l4dope | input: AT Translated Set 2 keyboard on isa0060/serio0
l4dope | input: PC Speaker
l4dope | input: L4 input event injector
l4dope | L4 input event injector: IRQ handler up
l4dope | connect "ImPS/2 Generic Wheel Mouse", isa0060/serio1/input0
l4dope | connect "AT Translated Set 2 keyboard", isa0060/serio0/input0
l4dope | connect "PC Speaker", isa0061/input0
l4dope | connect "L4 input event injector", l4/sys
l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=60, size=800
l4dope | SharedMem(get_adr): address = 6000
l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=61, size=800
l4dope | SharedMem(get_adr): address = 7000
l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=62, size=800
l4dope | SharedMem(get_adr): address = d000
l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=63, size=800
l4dope | SharedMem(get_adr): address = e000
l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=64, size=800
l4dope | SharedMem(get_adr): address = f000
l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=66, size=800
l4dope | SharedMem(get_adr): address = 16000
l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=67, size=800
l4dope | SharedMem(get_adr): address = 17000
l4dope | dope: addr=e0000000 size=31680KiB
io | Remapping I/O memory e0000000-e1ef0000 cached
io | Setting MTRR 4 to e0000000-e2000000 type WC
l4dope | Mapped video memory at e0000000 to 04000000+000000 [31680kB] via
L4IO
l4dope | mapping: vaddr=0x4000000 size=32440320(0x1ef0000) offset=0(0x0)
l4dope | Frame buffer base: 0x4000000
l4dope | Resolution: 1024x768x16
l4dope | Bytes per scanline: 2048
l4dope | Current video mode is 1024x768 red=11:5 green=5:6 blue=0:5 res=0:0
l4lx | Starting L4FB via DOpE
l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=75, size=96000
l4dope | SharedMem(get_adr): address = 400000
l4lx | l4lx_thread_create: Created thread 10.08 (DOpE refresher)
l4lx | l4lx_thread_create: Created thread 10.09 (L4DOpEinput)
l4lx | l4lx_thread_create: Created thread 10.0a (IRQ17)
l4lx | l4lx_thread_create: Created thread 10.0b (IRQ16)
l4lx | l4lx_thread_create: Created thread 10.0c (IRQ15)
l4lx | l4lx_thread_create: Created thread 10.0d (IRQ14)
l4lx | l4lx_thread_create: Created thread 10.0e (IRQ13)
l4lx | l4lx_thread_create: Created thread 10.0f (IRQ11)
l4lx | l4lx_thread_create: Created thread 10.10 (IRQ10)
l4lx | l4lx_thread_create: Created thread 10.11 (IRQ9)
l4lx | l4lx_thread_create: Created thread 10.12 (IRQ8)
l4lx | l4lx_thread_create: Created thread 10.13 (IRQ7)
l4lx | l4lx_thread_create: Created thread 10.14 (IRQ6)
l4lx | l4lx_thread_create: Created thread 10.15 (IRQ5)
l4lx | l4lx_thread_create: Created thread 10.16 (IRQ3)
l4dope | psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost
synchronization,
l4dope : throwing 3 bytes away.
l4dope | psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost
synchronization,
l4dope : throwing 3 bytes away.
Thank you.
cheng
-------------- next part --------------
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.17-l4
# Wed Nov 15 22:37:23 2006
#
#
# L4Linux configuration
#
CONFIG_L4=y
CONFIG_L4_LINUX=y
CONFIG_L4_OBJ_TREE="/home/fiasco/L4.17/build/"
CONFIG_L4_L4ENV=y
CONFIG_L4_ARCH_X86=y
# CONFIG_L4_ARCH_ARM is not set
CONFIG_HZ=100
CONFIG_PHYSICAL_START=0x0
# CONFIG_L4_USERPRIV_ONLY is not set
CONFIG_L4_L4ENV_MEMSIZE=32
CONFIG_L4_TAMED=y
#
# L4 build options
#
CONFIG_L4_MK_CPU_X86="586"
# CONFIG_L4_MK_USE_SYSENTER is not set
# CONFIG_L4_MK_CALL_SYSCALLS is not set
CONFIG_L4_USE_LDSO=y
#
# IRQ Handling
#
CONFIG_L4_IRQ_SINGLE=y
# CONFIG_L4_IRQ_OMEGA0 is not set
# CONFIG_L4_IRQ_MULTI is not set
#
# Stub drivers
#
# CONFIG_L4_EXTERNAL_RTC is not set
# CONFIG_L4_BLK_DRV is not set
# CONFIG_L4_PDSPBLK_DRV is not set
CONFIG_L4_FB_DRIVER=y
CONFIG_L4_FB_DRIVER_XF86IF=y
# CONFIG_L4_OSHKOSH_DRV is not set
# CONFIG_L4_ORE_DRV is not set
# CONFIG_L4_SERIAL is not set
# CONFIG_L4_NEED_DSI is not set
# CONFIG_L4_NEED_INET_NTOA is not set
# CONFIG_L4_DROPSCON is not set
#
# Priority configuration
#
CONFIG_L4_PRIO_USER_PROCESS=10
CONFIG_L4_PRIO_IRQ_OFFSET=129
CONFIG_L4_PRIO_SERVER=100
#
# Debugging options
#
# CONFIG_L4_DEBUG is not set
#
# Monitoring options (ferret)
#
# CONFIG_L4_FERRET_USER is not set
# CONFIG_L4_FERRET_KERNEL is not set
# CONFIG_L4_FERRET_SYSCALL_COUNTER is not set
#
#
#
CONFIG_X86_32=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
# CONFIG_VM86 is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_X86_TSC=y
# CONFIG_HPET_TIMER is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
# CONFIG_KEXEC is not set
#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
# CONFIG_ACPI is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
CONFIG_EL3=y
# CONFIG_3C515 is not set
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_FIRMWARE_EDID is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_STACK_BACKTRACE_COLS=2
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_4KSTACKS is not set
CONFIG_DOUBLEFAULT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
More information about the l4-hackers
mailing list