What is mean of this log?
chenggh
chenggh04 at st.lzu.edu.cn
Thu Nov 16 16:06:00 CET 2006
On Thursday 16 November 2006 21:19, Christian Stüble wrote:
> Hi,
>
> Am Donnerstag, 16. November 2006 12:45 schrieb chenggh:
> > Hi:
> > When I boot the L4Linux with L4dope, There are some log statements like
> > this:
> >
> > l4dope | psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost
> > synchronization,
> > l4dope : throwing 3 bytes away.
> > l4dope | psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost
> > synchronization,
> > l4dope : throwing 3 bytes away.
>
> This looks like Linux is trying to access the input HW directly. I was able
> to prevent this messages (and allow user I/O) by reconfiguring L4-Linux: 1)
> Activate General/For small systems
> 2) Then you can deactivate PC keyboard support etc.
> 3) Also disable HW serial support
>
> > l4lx | Terminating L4Linux.
> > l4lx | L4RM: [PF] read at 0x00000a28, ip 00000a29, src 10.02
> > l4lx | [10.0] l4rm/lib/src/pagefault.c:78:__unknown_pf():
> > l4lx | unhandled page fault
>
> This error happens here if I try to execute an older L4-Linux binary.
Thank you very much. Now my l4dope and l4linux is ok. Nothing error could
appear.
The minicom log is like this:
log | (hd0,1)/boot/L4Linux/log: unrecognized option `--events'
log | Unrecognized option: - ?
log | Usage: (hd0,1)/boot/L4Linux/log <options>. Option list:
log | [ -h | --help ] - this help
log | [ -v | --verbose ] - verbose mode
log | [ -l | --local ] - flush to local console
log | [ -L | --nolocal ] - do not flush to local console
log | [ -s | --comport num ] - flush to specified serial interface (0)
log | [ -e | --serial-esc ] - enter kdebug on esc on serial
log | [ -b | --buffer num ] - buffered mode (0)
log | [ --flushprio num ] - priority of flusher thread (0x20)
log | [ -p | --prio num ] - priority of main thread (0x20)
names | Starting thread listening for `exit' events
simplets| Configured for 300 tasks.
rtc | Date:16.11.2006 Time:15:05:15
DMphys | DMphys memory map:
DMphys | phys. memory 0x00000000-0x1dff0000 (from L4 kernel info page)
DMphys | using 0x00100000-0x1dff0000
DMphys | Memory area Pool PS Flags
DMphys | 0x00000000-0x00100000 -- -- RESERVED
DMphys | 0x00100000-0x00134000 7 12 MAPPED
DMphys | 0x00134000-0x001cb000 -- -- DENIED
DMphys | 0x001cb000-0x002d0000 7 12 MAPPED
DMphys | 0x002d0000-0x002e3000 -- -- DENIED
DMphys | 0x002e3000-0x00400000 7 12 MAPPED
DMphys | 0x00400000-0x0043a000 -- -- DENIED
DMphys | 0x0043a000-0x009e4000 7 12 MAPPED
DMphys | 0x009e4000-0x00b80000 0 12 MAPPED
DMphys | 0x00b80000-0x00bef000 -- -- DENIED
DMphys | 0x00bef000-0x00c00000 0 12 MAPPED
DMphys | 0x00c00000-0x01000000 0 22 MAPPED
DMphys | 0x01000000-0x01080000 0 12 MAPPED
DMphys | 0x01080000-0x0108a000 -- -- DENIED
DMphys | 0x0108a000-0x01100000 0 12 MAPPED
DMphys | 0x01100000-0x0114b000 -- -- DENIED
DMphys | 0x0114b000-0x01220000 0 12 MAPPED
DMphys | 0x01220000-0x01256000 -- -- DENIED
DMphys | 0x01256000-0x01300000 0 12 MAPPED
DMphys | 0x01300000-0x0134d000 -- -- DENIED
DMphys | 0x0134d000-0x01400000 0 12 MAPPED
DMphys | 0x01400000-0x0141c000 -- -- DENIED
DMphys | 0x0141c000-0x01500000 0 12 MAPPED
DMphys | 0x01500000-0x0151b000 -- -- RESERVED
DMphys | 0x0151b000-0x01540000 0 12 MAPPED
DMphys | 0x01540000-0x0154d000 -- -- DENIED
DMphys | 0x0154d000-0x01b00000 0 12 MAPPED
DMphys | 0x01b00000-0x01b8c000 -- -- DENIED
DMphys | 0x01b8c000-0x01c00000 0 12 MAPPED
DMphys | 0x01c00000-0x06800000 0 22 MAPPED
DMphys | 0x06800000-0x068b8000 0 12 MAPPED
DMphys | 0x068b8000-0x077f9000 -- -- DENIED
DMphys | 0x077f9000-0x07800000 0 12 MAPPED
DMphys | 0x07800000-0x1b800000 0 22 MAPPED
DMphys | 0x1b800000-0x1b839000 0 12 MAPPED
DMphys | 0x1b839000-0x1dff0000 -- -- DENIED
DMphys |
DMphys | DMphys memory pools:
DMphys | pool 0 (Default memory pool):
DMphys | size: 422900KB total, 422900KB free, 32KB reserved
DMphys | 0x009e4000-0x00b80000 ( 1648KB, 2MB)
DMphys | 0x00bef000-0x01080000 ( 4676KB, 5MB)
DMphys | 0x0108a000-0x01100000 ( 472KB, 0MB)
DMphys | 0x0114b000-0x01220000 ( 852KB, 1MB)
DMphys | 0x01256000-0x01300000 ( 680KB, 1MB)
DMphys | 0x0134d000-0x01400000 ( 716KB, 1MB)
DMphys | 0x0141c000-0x01500000 ( 912KB, 1MB)
DMphys | 0x0151b000-0x01540000 ( 148KB, 0MB)
DMphys | 0x0154d000-0x01b00000 ( 5836KB, 6MB)
DMphys | 0x01b8c000-0x068b8000 ( 79024KB, 77MB)
DMphys | 0x077f9000-0x1b839000 (327936KB, 320MB)
DMphys | pool 7 (ISA DMA memory pool):
DMphys | size: 8192KB total, 8192KB free, 0KB reserved
DMphys | 0x00100000-0x00134000 ( 208KB, 0MB)
DMphys | 0x001cb000-0x002d0000 ( 1044KB, 1MB)
DMphys | 0x002e3000-0x00400000 ( 1140KB, 1MB)
DMphys | 0x0043a000-0x009e4000 ( 5800KB, 6MB)
l4dope | DOpE(init): using L4 IO server
l4dope | (hd0,1)/boot/L4Linux/l4dope: unrecognized option `--menubar'
l4dope | DOpE(init): unknown option!
l4dope | DOpE(init): using transparency
io | do_args(): Disabling internal IRQ handling.
io | do_args(): Enabling events support.
io | CPU supports 8 MTRRs. Allocated:
io | 0: 00000000-20000000 ( 512MB) type WB
io | 1: 1e000000-20000000 ( 32MB) type UC
io | 2: e8000000-ec000000 ( 64MB) type WC
io | 3: e8000000-ec000000 ( 64MB) type WC
io | PCI: Using configuration type 1
io | PCI: Probing PCI hardware
io | PCI: Probing PCI hardware (bus 00)
io | PCI: Via IRQ fixup
bmodfs | Passed the following modules:
bmodfs | module "(hd0,1)/boot/L4Linux/vmlinuz26" (14503kB)
bmodfs | module "(hd0,1)/boot/L4Linux/linux26.cfg" (1kB)
bmodfs | module "(hd0,1)/boot/L4Linux/libloader.s.so" (635kB)
bmodfs | module "(hd0,1)/boot/L4Linux/libld-l4.s.so" (473kB)
io | 00000000-ffffffff : PCI mem
io | e0000000-e7ffffff : PCI Bus #01
io | e0000000-e7ffffff : S3 Inc. VT8375 [ProSavage8 KM266/KL266]
io | e8000000-ebffffff : VIA Technologies, Inc. VT8375 [KM266/KL266]
Hos
io : t Bridge
io | ec000000-ec0fffff : PCI Bus #01
io | ec000000-ec07ffff : S3 Inc. VT8375 [ProSavage8 KM266/KL266]
io | ec100000-ec1000ff : Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/
io : 8139C+
io | ec101000-ec1017ff : VIA Technologies, Inc. IEEE 1394 Host
Controlle
io : r
io | ec102000-ec1020ff : VIA Technologies, Inc. USB 2.0
io | 0000-ffff : PCI IO
io | 0cf8-0cff : PCI conf1
io | d000-d0ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
io | d400-d47f : VIA Technologies, Inc. IEEE 1394 Host Controller
io | d800-d81f : VIA Technologies, Inc. USB
io | dc00-dc1f : VIA Technologies, Inc. USB (#2)
io | e000-e01f : VIA Technologies, Inc. USB (#3)
io | e400-e40f : VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/
io : A/C PIPC Bus Master IDE
io | e800-e8ff : VIA Technologies, Inc. VT8233/A/8235 AC97 Audio
Control
io : ler
loader | vmlinuz26: Starting application using libld-l4.s.so
loader | vmlinuz26,#10: Loading binary
l4dope | L4INPUT: !!! W A R N I N G !!!
l4dope | L4INPUT: Please, do not use Fiasco's "-esc" with L4INPUT.
l4dope | L4INPUT: !!! W A R N I N G !!!
loader | vmlinuz26,#10: Loading ldso
loader | vmlinuz26,#10: Starting libld-l4.s.so at 00013870 via 0000bc54
l4dope | serio: i8042 AUX port at 0x60,0x64 irq 12
l4dope | serio: i8042 KBD port at 0x60,0x64 irq 1
l4dope | input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
l4lx | ======> L4Linux 2.6 starting... <========
l4lx | Linux version 2.6.17-l4 (root at fiasco-desktop) (gcc version 3.4.6
(Ubu
l4lx : ntu 3.4.6-1ubuntu2)) #5 Thu Nov 16 22:52:26 CST 2006
l4lx | Binary name: vmlinuz26
l4lx | Kernel command line (4 args): earlyprintk=yes mem=256M video=l4fb
roo
l4lx : t=/dev/hda2
l4lx | Image: 00400000 - 00731000 [3268 KiB].
l4lx | Areas: Text: 00400000 - 00642000 [2312kB] (a bit longer)
l4lx | Data: 00642000 - 0068bd8c [295kB]
l4lx | Initdata: 0068e000 - 006bf000 [196kB]
l4lx | BSS: 006c0000 - 0072f6f0 [445kB]
l4lx | l4lx_thread_create: Created thread 10.03 (tamer)
l4lx | Using tamed mode.
l4lx | l4env_linux_startup thread 4.
l4lx | l4lx_thread_create: Created thread 10.04 (server)
l4lx | main thread will be 10.04
l4lx | l4env_register_pointer_section: addr = 00642000 size = 512000
l4lx | sec-w-init: virt: 0x00642000 to 0x006befff [500 KiB]
l4lx | sec-w-init: Number of physical regions: 1, 512000 Bytes
l4lx | sec-w-init: 1: Phys: 0x0142b000 to 0x014a8000, Size: 512000
l4lx | main thread: received startup message.
l4lx | Main thread running, waiting...
l4lx | setup_l4env_memory: Forcing superpages for main memory
l4lx | Main memory size: 256MB
l4lx | Got 2048kB of ISA DMA memory.
l4lx | ISA DMA memory: virt: 0x00800000 to 0x009fffff [2048 KiB]
l4lx | ISA DMA memory: Number of physical regions: 1, 2097152 Bytes
l4lx | ISA DMA memory: 1: Phys: 0x0043a000 to 0x0063a000, Size: 2097152
l4lx | Main memory: virt: 0x00c00000 to 0x10bfffff [262144 KiB]
l4lx | Main memory: Number of physical regions: 1, 268435456 Bytes
l4lx | Main memory: 1: Phys: 0x07800000 to 0x17800000, Size: 268435456
l4lx | Filling lower ptabs...
l4lx | Done (1611 entries).
l4lx | l4lx_thread_create: Created thread 10.05 (timer.i0)
l4lx | l4lx_thread_create: Created thread 10.06 (Idler)
l4dope | input: AT Translated Set 2 keyboard on isa0060/serio0
l4dope | input: PC Speaker
l4dope | input: L4 input event injector
l4dope | L4 input event injector: IRQ handler up
l4dope | connect "ImPS/2 Generic Wheel Mouse", isa0060/serio1/input0
l4dope | connect "AT Translated Set 2 keyboard", isa0060/serio0/input0
l4dope | connect "PC Speaker", isa0061/input0
l4dope | connect "L4 input event injector", l4/sys
l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=60, size=800
l4dope | SharedMem(get_adr): address = 6000
l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=61, size=800
l4dope | SharedMem(get_adr): address = 7000
l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=62, size=800
l4dope | SharedMem(get_adr): address = d000
l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=63, size=800
l4dope | SharedMem(get_adr): address = e000
l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=64, size=800
l4dope | SharedMem(get_adr): address = f000
l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=66, size=800
l4dope | SharedMem(get_adr): address = 16000
l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=67, size=800
l4dope | SharedMem(get_adr): address = 17000
l4dope | dope: addr=e0000000 size=31680KiB
io | Remapping I/O memory e0000000-e1ef0000 cached
io | Setting MTRR 4 to e0000000-e2000000 type WC
l4dope | Mapped video memory at e0000000 to 04000000+000000 [31680kB] via
L4IO
l4dope | mapping: vaddr=0x4000000 size=32440320(0x1ef0000) offset=0(0x0)
l4dope | Frame buffer base: 0x4000000
l4dope | Resolution: 1024x768x16
l4dope | Bytes per scanline: 2048
l4dope | Current video mode is 1024x768 red=11:5 green=5:6 blue=0:5 res=0:0
l4lx | Starting L4FB via DOpE
l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=75, size=96000
l4dope | SharedMem(get_adr): address = 400000
l4lx | l4lx_thread_create: Created thread 10.08 (DOpE refresher)
l4lx | l4lx_thread_create: Created thread 10.09 (L4DOpEinput)
l4lx | l4lx_thread_create: Created thread 10.0a (IRQ17)
l4lx | l4lx_thread_create: Created thread 10.0b (IRQ16)
l4lx | l4lx_thread_create: Created thread 10.0c (IRQ15)
l4lx | l4lx_thread_create: Created thread 10.0d (IRQ14)
l4lx | l4lx_thread_create: Created thread 10.0e (IRQ13)
l4lx | l4lx_thread_create: Created thread 10.0f (IRQ11)
l4lx | l4lx_thread_create: Created thread 10.10 (IRQ10)
l4lx | l4lx_thread_create: Created thread 10.11 (IRQ9)
l4lx | l4lx_thread_create: Created thread 10.12 (IRQ8)
l4lx | l4lx_thread_create: Created thread 10.13 (IRQ7)
l4lx | l4lx_thread_create: Created thread 10.14 (IRQ6)
l4lx | l4lx_thread_create: Created thread 10.15 (IRQ5)
l4lx | l4lx_thread_create: Created thread 10.16 (IRQ3)
Best wishes.
Thank you again.
cheng
More information about the l4-hackers
mailing list