problem when booting l4linux

junioraozhi at sina.com junioraozhi at sina.com
Fri Jul 13 03:17:19 CEST 2007


Hi all!

I need your help again.

I have built the fiasco,l4env,l4linux on my fedora core 5.

But there are someting wrong with booting l4linux,it says "The running kernel does not have the l4lx segments " and goes to jdb.

The following is the log when booting ,and also the configuration file ,menu.list 

Thx!

 
 
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

>>>>>                LOG                >>>>>

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

 
Welcome to Fiasco(ia32)!

DD-L4(v2)/x86 microkernel (C) 1998-2007 TU Dresden

Rev: r121 compiled with gcc 4.1.0 for Intel Pentium

Performance-critical config option(s) detected:

  CONFIG_NDEBUG is off

 
Enabling special fully nested mode for PIC

Using the PIT (i8254) on IRQ 0 for scheduling

SERIAL ESC: allocated IRQ 4 for serial uart

SERIAL ESC: allocated IRQ 4 for serial uart

Not using serial hack in slow timer handler.

Absolute KIP Syscalls using: Sysenter

CPU: GenuineIntel (F:4:3:0) Model: Pentium 4E (Prescott/Nocona) at 3000 MHz

 
 128 Entry I TLB (4K or 4M pages)

  64 Entry D TLB (4k or 4M pages)

 12K ?ops T Cache (8-way associative)

  16 KB L1 D Cache (8-way associative, 64 bytes per line)

2048 KB L2 U Cache (8-way associative, 64 bytes per line)

 
Freeing init code/data: 20480 bytes (5 pages)

 
Calibrating timer loop... done.

SIGMA0: Hello!

  KIP @ 1000

  Found Fiasco: KIP syscalls: yes

  allocated 4KB for maintenance structures

 
 
Roottask.

  Command line found: "/boot/l4linux/roottask task modname "bmodfs" attached 4 modules"

 
  507454kB ( 495MB) total RAM (reported by bootloader)

  461396kB ( 451MB) received RAM from Sigma0

   25504kB (  25MB) reserved RAM for RMGR

  Received I/O ports 0000-ffff

  Attached irqs = [ <!0> 1 <!2> 3 <!4> 5 6 7 8 9 A B C D E F 10 11 ]

 
Roottask: Parsing command line config.

  configured task 0x00 (bmodfs):

    vm_offs:0 irq:3ffff lmcp:ffff allow_cli:0 mcp:ff prio:10 small:ff mods:4

 
Roottask: Loading 14 modules.

#05: loading "/boot/l4linux/events"

     from [06121000-06161f16] to [01540000-01548b30][01549000-0155e5d0]

     entry at 0005b370 via trampoline page code

     symbols at [1c841000-1c843000] (8kB), lines at [1c83b000-1c841000] (24kB)

#06: loading "/boot/l4linux/names --events"

     from [06162000-0619fc75] to [002d0000-002d5eca][002d6000-002e1000]

     entry at 0005c378 via trampoline page code

     symbols at [1c839000-1c83b000] (8kB), lines at [1c834000-1c839000] (20kB)

#07: loading "/boot/l4linux/log --events"

     from [061a0000-061db22f] to [00400000-0040688a][00407000-00439848]

     entry at 0005d374 via trampoline page code

     symbols at [1c832000-1c834000] (8kB), lines at [1c82c000-1c832000] (24kB)

#08: loading "/boot/l4linux/loader --fprov=BMODFS linuz26.cfg"

     from [061dc000-062ade15] to [01300000-01324d9d][01325000-01343000]

     entry at 0005e388 via trampoline page code

     symbols at [1c826000-1c82c000] (24kB), lines at [1c80f000-1c826000] (92kB)

#09: loading "/boot/l4linux/dm_phys --isa=0x00800000 -v --events"

     from [062ae000-06337fa6] to [01500000-0151218a][01513000-0151d000]

     entry at 0005f38c via trampoline page code

     symbols at [1c80a000-1c80f000] (20kB), lines at [1c7fe000-1c80a000] (48kB)

#0a: loading "/boot/l4linux/simple_ts -t 300 --events"

     from [06338000-06381ed6] to [01400000-0140814a][01409000-01418608]

     entry at 00061380 via trampoline page code

     symbols at [1c7fc000-1c7fe000] (8kB), lines at [1c7f5000-1c7fc000] (28kB)

#0b: loading "/boot/l4linux/rtc --events"

     from [06382000-063b1cd7] to [01080000-010840c0][01085000-0108a000]

     entry at 00062374 via trampoline page code

     symbols at [1c7f3000-1c7f5000] (8kB), lines at [1c7ef000-1c7f3000] (16kB)

#0c: loading "/boot/l4linux/l4io --noirq --events"

     from [063b2000-066098e5] to [00b80000-00ba21b1][00ba3000-00c0b000]

     entry at 0006337c via trampoline page code

     symbols at [1c79c000-1c7ef000] (332kB), lines at [1c784000-1c79c000] (96kB)

#0d: loading "/boot/l4linux/l4dope --l4io "

     from [0660a000-06772ae0] to [01b00000-01b40fe5][01b41000-01b82000]

     entry at 00064378 via trampoline page code

     symbols at [1c776000-1c784000] (56kB), lines at [1c74c000-1c776000] (168kB)

#0e: loading "/boot/l4linux/bmodfs"

     from [06773000-0680f912] to [01220000-0123559d][01236000-0124d000]

     passing module /boot/l4linux/vmlinuz26               [ 06810000-07752e29 ]

     passing module /boot/l4linux/linuz26.cfg             [ 07753000-0775307a ]

     passing module /boot/l4linux/libloader.s.so          [ 07754000-077f182c ]

     passing module /boot/l4linux/libld-l4.s.so           [ 077f2000-0786a8f1 ]

     entry at 00065420 via trampoline page code

     symbols at [1c747000-1c74c000] (20kB), lines at [1c737000-1c747000] (64kB)

 
log     | /boot/l4linux/log: unrecognized option `--events'

log     | Unrecognized option: - ?

log     | Usage: /boot/l4linux/log <options>. Option list:

log     |  [ -h | --help ]          - this help

log     |  [ -v | --verbose ]       - verbose mode

log     |  [ -l | --local ]         - flush to local console

log     |  [ -L | --nolocal ]       - do not flush to local console

log     |  [ -s | --comport num ]   - flush to specified serial interface (0)

log     |  [ -e | --serial-esc ]    - enter kdebug on esc on serial

log     |  [ -b | --buffer num ]    - buffered mode (0)

log     |  [ --flushprio num ]      - priority of flusher thread (0x20)

log     |  [ -p | --prio num ]      - priority of main thread (0x20)

names   | Starting thread listening for `exit' events

simplets| Configured for 300 tasks.

rtc     | Date:09.07.2007 Time:08:54:28

DMphys  | DMphys memory map:

DMphys  |   phys. memory 0x00000000-0x1eff0000 (from L4 kernel info page)

DMphys  |   using 0x00100000-0x1eff0000

DMphys  |        Memory area      Pool  PS  Flags

DMphys  |   0x00000000-0x0009f000  --   --  RESERVED 

DMphys  |   0x00100000-0x00161000  --   --  RESERVED 

DMphys  |   0x00161000-0x001cc000  --   --  DENIED

DMphys  |   0x001cc000-0x002d0000   7   12  MAPPED 

DMphys  |   0x002d0000-0x002e1000  --   --  DENIED

DMphys  |   0x002e1000-0x00400000   7   12  MAPPED 

DMphys  |   0x00400000-0x0043a000  --   --  DENIED

DMphys  |   0x0043a000-0x00a17000   7   12  MAPPED 

DMphys  |   0x00a17000-0x00b80000   0   12  MAPPED 

DMphys  |   0x00b80000-0x00c0b000  --   --  DENIED

DMphys  |   0x00c0b000-0x01080000   0   12  MAPPED 

DMphys  |   0x01080000-0x0108a000  --   --  DENIED

DMphys  |   0x0108a000-0x01220000   0   12  MAPPED 

DMphys  |   0x01220000-0x0124d000  --   --  DENIED

DMphys  |   0x0124d000-0x01300000   0   12  MAPPED 

DMphys  |   0x01300000-0x01343000  --   --  DENIED

DMphys  |   0x01343000-0x01400000   0   12  MAPPED 

DMphys  |   0x01400000-0x01419000  --   --  DENIED

DMphys  |   0x01419000-0x01500000   0   12  MAPPED 

DMphys  |   0x01500000-0x0151c000  --   --  RESERVED 

DMphys  |   0x0151c000-0x01540000   0   12  MAPPED 

DMphys  |   0x01540000-0x0155f000  --   --  DENIED

DMphys  |   0x0155f000-0x01b00000   0   12  MAPPED 

DMphys  |   0x01b00000-0x01b82000  --   --  DENIED

DMphys  |   0x01b82000-0x01c00000   0   12  MAPPED 

DMphys  |   0x01c00000-0x06800000   0   22  MAPPED 

DMphys  |   0x06800000-0x06810000   0   12  MAPPED 

DMphys  |   0x06810000-0x0786b000  --   --  DENIED

DMphys  |   0x0786b000-0x07c00000   0   12  MAPPED 

DMphys  |   0x07c00000-0x1c400000   0   22  MAPPED 

DMphys  |   0x1c400000-0x1c737000   0   12  MAPPED 

DMphys  |   0x1c737000-0x1eff0000  --   --  DENIED

DMphys  | 

DMphys  | DMphys memory pools:

DMphys  |  pool 0 (Default memory pool):

DMphys  |  size: 437160KB total, 437160KB free,  32KB reserved

DMphys  |   0x00a17000-0x00b80000 (  1444KB,    1MB) free DS:

DMphys  |   0x00c0b000-0x01080000 (  4564KB,    4MB) free DS:

DMphys  |   0x0108a000-0x01220000 (  1624KB,    2MB) free DS:

DMphys  |   0x0124d000-0x01300000 (   716KB,    1MB) free DS:

DMphys  |   0x01343000-0x01400000 (   756KB,    1MB) free DS:

DMphys  |   0x01419000-0x01500000 (   924KB,    1MB) free DS:

DMphys  |   0x0151c000-0x01540000 (   144KB,    0MB) free DS:

DMphys  |   0x0155f000-0x01b00000 (  5764KB,    6MB) free DS:

DMphys  |   0x01b82000-0x06810000 ( 78392KB,   77MB) free DS:

DMphys  |   0x0786b000-0x1c737000 (342832KB,  335MB) free DS:

DMphys  |  pool 7 (ISA DMA memory pool):

DMphys  |  size:   8192KB total,   8192KB free,   0KB reserved

DMphys  |   0x001cc000-0x002d0000 (  1040KB,    1MB) free DS:

DMphys  |   0x002e1000-0x00400000 (  1148KB,    1MB) free DS:

DMphys  |   0x0043a000-0x00a17000 (  6004KB,    6MB) free DS:

bmodfs  | Passed the following modules:

bmodfs  |   module "/boot/l4linux/vmlinuz26" (15628kB)

bmodfs  |   module "/boot/l4linux/linuz26.cfg" (1kB)

bmodfs  |   module "/boot/l4linux/libloader.s.so" (631kB)

bmodfs  |   module "/boot/l4linux/libld-l4.s.so" (483kB)

loader  | vmlinuz26: Starting application using libld-l4.s.so

loader  | vmlinuz26,#f: Loading binary

loader  | vmlinuz26,#f: Loading ldso

loader  | Capability support not enabled.

loader  | vmlinuz26,#f: Starting libld-l4.s.so at 00013870 via 0000cc54

l4dope  | /boot/l4linux/l4dope: unrecognized option `--l4io'

l4dope  | DOpE(init): unknown option!

io      | /boot/l4linux/l4io: unrecognized option `--noirq'

io      | Enabling events support.

io      | PCI: Using configuration type 1

io      | PCI: Probing PCI hardware

io      | PCI: Probing PCI hardware (bus 00)

io      | PCI: Ignoring BAR0-3 of IDE controller 00:1f.2

io      | Transparent bridge - Intel Corporation 82801 PCI Bridge

io      | 00000000-ffffffff : PCI mem

io      |   e0000000-efffffff : Intel Corporation 82865G/PE/P DRAM Controller/H

io      : ost-Hub Interface

io      |   f0000000-f7ffffff : Intel Corporation 82865G Integrated Graphics Co

io      : ntroller

io      |   f9000000-f90000ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/

io      : 8139C+

io      |   f9001000-f9001fff : Intel Corporation 82801EB/ER (ICH5/ICH5R) integ

io      : rated LAN Controller

io      |   fa000000-fa07ffff : Intel Corporation 82865G Integrated Graphics Co

io      : ntroller

io      |   fa080000-fa0803ff : Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 

io      : EHCI Controller

io      |   fa081000-fa0811ff : Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97

io      :  Audio Controller

io      |   fa082000-fa0820ff : Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97

io      :  Audio Controller

io      | 0000-ffff : PCI IO

io      |   0cf8-0cff : PCI conf1

io      |   1400-141f : Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Control

io      : ler

io      |   a000-a0ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+

io      |   a400-a43f : Intel Corporation 82801EB/ER (ICH5/ICH5R) integrated LA

io      : N Controller

io      |   b000-b01f : Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Cont

io      : roller #1

io      |   b400-b41f : Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Cont

io      : roller #2

io      |   b800-b81f : Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Cont

io      : roller #3

io      |   bc00-bc1f : Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Cont

io      : roller #4

io      |   c000-c007 : Intel Corporation 82865G Integrated Graphics Controller

io      |   dc00-dcff : Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio C

io      : ontroller

io      |   e000-e03f : Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio C

io      : ontroller

io      |   f000-f00f : Intel Corporation 82801EB (ICH5) SATA Controller

io      | Available IRQs=[ <!0> 1 <!2> 3 <!4> 5 6 7 8 9 a b c d e f 10 11 ]

l4dope  | L4INPUT native mode activated

l4dope  | L4INPUT:                !!! W A R N I N G !!!

l4dope  | L4INPUT:  Please, do not use Fiasco's "-esc" with L4INPUT.

l4dope  | L4INPUT:                !!! W A R N I N G !!!

ROOT: Sending ports 0060-006f to task #0c

l4dope  | serio: i8042 AUX port at 0x60,0x64 irq 12

l4dope  | serio: i8042 KBD port at 0x60,0x64 irq 1

l4lx    | ======> L4Linux 2.6 starting... <========

l4lx    | Linux version 2.6.21-l4 (root at lgh-FC5) (gcc version 4.1.0 20060304 (R

l4lx    : ed Hat 4.1.0-3)) #19 Wed Jul 4 10:19:59 CST 2007

l4lx    | Binary name: vmlinuz26

l4lx    | Kernel command line (4 args): earlyprintk=yes mem=256M video=l4fb roo

l4lx    : t=/dev/sda7

l4lx    | The running kernel does not have the

l4lx    |       segments

l4lx    | feature enabled!

 
    --kernel feature missing!--------------------------------IP: 0040163b      

[l4lx.main] (f.02) jdb: 

 
 
 
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

>>>>> the config file "linuz26.config"  >>>>>

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

 
verbose 0

task "vmlinuz26" "earlyprintk=yes mem=256M video=l4fb root=/dev/sda7"

    all_sects_writable

    allow_cli

    allow_vga

 
 
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

>>>>>       the menu.list of grub       >>>>>

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

 
title L4Linux26/Fiasco+dope

        root (hd0,6)

        kernel /boot/l4linux/bootstrap

        modaddr 0x06000000

        module /boot/l4linux/main -nowait -nokdb -serial_esc -comspeed 115200 -c

omport 1

        module  /boot/l4linux/sigma0

        module  /boot/l4linux/roottask task modname "bmodfs" attached 4 modules

        module  /boot/l4linux/events

        module  /boot/l4linux/names --events

        module  /boot/l4linux/log --events

        module  /boot/l4linux/loader --fprov=BMODFS linuz26.cfg

        module  /boot/l4linux/dm_phys --isa=0x00800000 -v --events

        module  /boot/l4linux/simple_ts -t 300 --events

        module  /boot/l4linux/rtc --events

        module  /boot/l4linux/l4io --noirq --events

        module  /boot/l4linux/l4dope --l4io

        module  /boot/l4linux/bmodfs

                module  /boot/l4linux/vmlinuz26

                module  /boot/l4linux/linuz26.cfg

                module  /boot/l4linux/libloader.s.so

                module  /boot/l4linux/libld-l4.s.so

        vbeset  0x117 506070

        boot


-------------------------------------------------------------------
MOTONBA篮球赛招募( http://d1.sina.com.cn/sina/limeng3/mail_zhuiyu/2007/mail_zhuiyu_20070709.html )

===================================================================
注册新浪2G免费邮箱( http://mail.sina.com.cn/chooseMode.html )
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://os.inf.tu-dresden.de/pipermail/l4-hackers/attachments/20070713/48051005/attachment.html>


More information about the l4-hackers mailing list