Run L4linux on ARM platform

[kashin Lin]

Hi~

the l4linux system architecture from buttom to up is : hardware→ fiasco→
L4env→ L4Linux.
according to the webpage(
http://os.inf.tu-dresden.de/L4/LinuxOnL4/build-2.6.shtml ) description
, make l4env first then make l4linux,i am confused that the sequence of
compile full L4Linux system.
when to config fiasco & make it?

due to the l4linux system architecture mentioned above, the sequence of
build all system should
be:

1. config fiasco
2. make fiasco
3. config l4env
4. make l4env
5. config l4linux
6. make l4linux

is it right? if not, what should it be?


2007/7/6, Adam Lackorzynski <adam at os.inf.tu-dresden.de>:
>
>
> On Thu Jul 05, 2007 at 23:31:38 +0800, kashin Lin wrote:
> > 2007/7/5, Adam Lackorzynski <adam at os.inf.tu-dresden.de>:
> > >
> > >
> > >On Thu Jul 05, 2007 at 00:15:15 +0800, kashin Lin wrote:
> > >
> > >> 2. as you metioned above, i should adapt the configuration of fiasco
> > >> to my target platform,
> > >> but...     (1) when do i do this? before make anything?
> > >
> > >Not only the configuration but also the code. You probably need to
> > >write a e.g. UART driver for your platform. As I said, I don't know
> > >which UART is used on your board. Can you tell which type of UART is
> > >used there?
> >
> >
> >
> > There is a UART (RS232 port) which can communicate with PC.
> > how to add that UART driver in fiasco?
>
> You need to add a new platform. Basically you can do the same thing as
> it's done with the integrator platform. The UART implementation goes to
> src/lib/uart/arm, and need to be hooked in
> src/kern/arm/kernel_uart-arm.cpp.
>
> > are there any other platform dependent things that need to touch the
> code?
>
> Most likely. The PIC implementation goes to src/kern/arm/pic-arm.cpp,
> and the timer goes to src/kern/arm/timer-arm.cpp. Other files to look at
> are Modules.arm to specify the label to build under and probably
> rules.cml to add a new platform. The CPU specific things may also need
> adaptions.
>
>
>
> Adam
> --
> Adam                 adam at os.inf.tu-dresden.de
> Lackorzynski         http://os.inf.tu-dresden.de/~adam/
>
> _______________________________________________
> l4-hackers mailing list
> l4-hackers at os.inf.tu-dresden.de
> http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://os.inf.tu-dresden.de/pipermail/l4-hackers/attachments/20070709/9e20073b/attachment.htm>