l4linux on arm11mpcore (build error)

Adam Lackorzynski adam at os.inf.tu-dresden.de
Sun Nov 7 15:30:47 CET 2010


Hi,

On Sat Nov 06, 2010 at 23:36:11 -0400, Rahul Ramasubramanian wrote:
> I am trying to build l4linux for arm. I have already built and tested l4re
> and the fiasco kernel (generated a simple image using the hello.lua script)
> After pulling the l4linux sources from svn , i used the following steps (as
> described in the wiki)
> 1> l4linux-2.6$ make O=/tmp/buildpath L4ARCH=arm CROSS_COMPILE=arm-linux-
> arm_defconfig
> 2>l4linux-2.6$ make O=/tmp/buildpath L4ARCH=arm CROSS_COMPILE=arm-linux-
> menuconfig
> 
> In menuconfig , i gave the correct path for l4 build dirctory ( in my case
> it is /home/syslab1/l4fiasco/src/l4/build). This is the directory which
> hosuses the images folder etc after the l4re and the simple hello image was
> built. I also selected the arm architecture
> 3>l4linux-2.6$ make O=/tmp/buildpath L4ARCH=arm CROSS_COMPILE=arm-linux-
> 
> I get the following error when i run the last command
> 
> 
> syslab1 at syslab1-desktop:~/l4fiasco/l4linux$ make O=/tmp/l4linuxbuild/
> L4ARCH=arm CROSS_COMPILE=arm-linux- L4 source directory:
> /home/syslab1/l4fiasco/src/l4 PWD=/home/syslab1/l4fiasco/src/l4 make -C
> /home/syslab1/l4fiasco/src/l4 -f
> /home/syslab1/l4fiasco/l4linux/arch/l4/Makefile.l4conf
> O=/home/syslab1/l4fiasco/src/l4/build L4X_LOOP_CHECK=1
> OUTPUT=/tmp/l4linuxbuild/Makeconf.l4conf GEN
> /tmp/l4linuxbuild/Makeconf.l4conf GEN /tmp/l4linuxbuild/Makefile
> scripts/kconfig/conf -s arch/l4/Kconfig
> include/config/auto.conf:486:warning: symbol value 'elf32-i386' invalid for
> OUTPUT_FORMAT include/config/auto.conf:690:warning: symbol value
> 'arch/x86/configs/i386_defconfig' invalid for ARCH_DEFCONFIG
> include/config/auto.conf:896:warning: symbol value '' invalid for
> ACPI_CUSTOM_DSDT_FILE include/config/auto.conf:1692:warning: symbol value
> '-fcall-saved-ecx -fcall-saved-edx' invalid for ARCH_HWEIGHT_CFLAGS Getting
> required compilation flags failed. L4OBJ:
> /home/syslab1/l4fiasco/src/l4/build L4_REQUIRED_MODS: stdlibs log
> l4re_c-util libio shmc /home/syslab1/l4fiasco/l4linux/arch/l4/Makefile:287:
> *** Aborting.. Stop. make: *** [sub-make] Error 2
> 
> Can anyone tell me where I am going wrong. This thing seems simple enough
> but i am sure i am making a simple mistake which i am unable to resolve.
> Will appreciate if someone can tell me how to make this error go away.

There are too many x86 related error messages in there. Are you sure you
did not call make on the build directory without specifying L4ARCH=arm?



Adam
-- 
Adam                 adam at os.inf.tu-dresden.de
  Lackorzynski         http://os.inf.tu-dresden.de/~adam/




More information about the l4-hackers mailing list