Hi Adam
Thank you for your reply. This seems strange to me too. I as mentioned am running my own application in place of the Linux OS, below is the configuration of module and the .cfg used
(module.list) entry[arch=arm64] VM-G roottask moe rom/vm-g.cfg module l4re module ned module cons module io module vm-g.cfg module[arch=arm64,fname=icarmvpx3a.io] drivers.io module uvmm module[arch=arm64,fname=kernel.dtb] dtb/kernel.dtb module[arch=arm64,fname=driver_ethernet,nostrip] /home/user/Documents/TestEthernet/build/ethernet_loop
(vm-g.cfg) -- vim:set ft=lua: local L4 = require "L4";
local l = L4.default_loader; local flags = L4.Mem_alloc_flags.Continuous | L4.Mem_alloc_flags.Pinned | L4.Mem_alloc_flags.Super_pages;
local align = 21;
-- start console server local cons = l:new_channel();
l:start({ caps = { cons = cons:svr() }, log = L4.Env.log, }, "rom/cons -a");
l.log_fab = cons;
local serialdev = { arm = "ttyAMA0", arm64 = "ttyAMA0", amd64 = "ttyS0" };
-- start io server local vbus_l4 = l:new_channel();
l:start({ caps = { vbus = vbus_l4:svr(), icu = L4.Env.icu, iommu = L4.Env.iommu, sigma0 = L4.Env.sigma0, }, log = { "IO", "y" }, l4re_dbg = L4.Dbg.Info, scheduler = L4.Env.user_factory:create(L4.Proto.Scheduler, 0xa0, 0x80, 0x02); }, "rom/io rom/drivers.io");
-- start vmm server l:startv({ caps = { ram = L4.Env.user_factory:create(L4.Proto.Dataspace, 0x30000000, flags, align):m("rw"), vbus = vbus_l4,
}, log = { "vm", "Black" }, l4re_dbg = L4.Dbg.Info, scheduler = L4.Env.user_factory:create(L4.Proto.Scheduler, 0x18, 0x8, 0x02); }, "rom/uvmm", "-v", "-i", "-krom/ethernet_loop", "-drom/kernel.dtb", "-b0xC0000000", "-cconsole=" .. serialdev[L4.Info.arch()] .. " rw" );
To calculate the core usage time and get performance estimates I use the following function:
uint32_t cnt_freq = read_cntfrq_el0();
start = read_cntpct_el0(); for (volatile uint64_t i = 0; i < counter; i++) { __asm__ volatile("nop"); } end = read_cntpct_el0();
uint64_t elapsed_ticks = end - start; double time_ns = ((double)elapsed_ticks * 1e9) / cnt_freq;
I have done this count on different amounts of iterations, to give you an estimate, I will only give you the one out of 1000 counts.
1) Application in bare metal => 2719 ns 2) Application on Linux vmm => 3680 ns 3) Application on vmm without Linux (i.e. the application of point 1) => 390880 ns
I hope you can help me understand how I can handle this situation correctly.
Thank you for your support