Created vcon channel: vm1 [426010] cons> Created vcon channel: vm2 [427010] cons> vm1 | VMM: Created VCPU 0 @ 17000 vm1 | VMM[vmbus]: 'vbus' capability not found. Hardware access not possible for VM. vm1 | VMM[main]: Hello out there. vm1 | VMM[ASM]: Sys Info: vm1 | vBus: 0 vm1 | DMA devs: 0 vm1 | IO-MMU: 0 vm1 | Identity forced: 0 vm1 | DMA phys addr: 0 vm1 | DT dma-ranges: 0 vm1 | VMM[ASM]: Operating mode: No DMA vm1 | VMM[ram]: RAM not set up for DMA. vm2 | VMM: Created VCPU 0 @ 17000 vm2 | VMM[vmbus]: 'vbus' capability not found. Hardware access not possible for VM. vm2 | VMM[main]: Hello out there. vm1 | VMM[ram]: RAM: @ 0x0 size=0x20000000 vm1 | VMM[ram]: RAM: VMM local mapping @ 0x1000000 vm1 | VMM[ram]: RAM: VM offset=0x1000000 vm2 | VMM[ASM]: Sys Info: vm2 | vBus: 0 vm1 | VMM[main]: Loading kernel... vm2 | DMA devs: 0 vm2 | IO-MMU: 0 vm2 | Identity forced: 0 vm2 | DMA phys addr: 0 vm2 | DT dma-ranges: 0 vm2 | VMM[ASM]: Operating mode: No DMA vm1 | VMM[loader]: Elf image detected vm2 | VMM[ram]: RAM not set up for DMA. vm1 | VMM[bin]: Copy in ELF binary section @0x1000000 from 0x200000/0x18aef10 vm1 | VMM[bin]: Copy in ELF binary section @0x2a00000 from 0x1c00000/0x814000 vm1 | VMM[bin]: Copy in ELF binary section @0x3214000 from 0x2600000/0x2ece8 vm1 | VMM[bin]: Copy in ELF binary section @0x3243000 from 0x2643000/0x288000 vm1 | VMM[main]: Loading ram disk... vm1 | VMM[ram]: load: rom/ramdisk1-amd64.rd -> 0x1fc00000 vm1 | VMM[file]: load: @ 0x1fc00000 vm1 | VMM[file]: copy in: to offset 0x1fc00000-0x1fffffff vm1 | VMM[main]: Loaded ramdisk image rom/ramdisk1-amd64.rd to 1fc00000 (size: 00400000) vm2 | VMM[ram]: RAM: @ 0x0 size=0x20000000 vm2 | VMM[ram]: RAM: VMM local mapping @ 0x1000000 vm2 | VMM[ram]: RAM: VM offset=0x1000000 vm2 | VMM[main]: Loading kernel... vm1 | VMM[PIC]: Hello, Legacy_pic vm2 | VMM[loader]: Elf image detected vm2 | VMM[bin]: Copy in ELF binary section @0x1000000 from 0x200000/0x18aef10 vm2 | VMM[bin]: Copy in ELF binary section @0x2a00000 from 0x1c00000/0x814000 vm2 | VMM[bin]: Copy in ELF binary section @0x3214000 from 0x2600000/0x2ece8 vm2 | VMM[bin]: Copy in ELF binary section @0x3243000 from 0x2643000/0x288000 vm2 | VMM[main]: Loading ram disk... vm1 | VMM: acpi_platform: Failed to get property 'l4vmm,pwrinput': FDT_ERR_NOTFOUND vm2 | VMM[ram]: load: rom/ramdisk2-amd64.rd -> 0x1fc00000 vm2 | VMM[file]: load: @ 0x1fc00000 vm2 | VMM[file]: copy in: to offset 0x1fc00000-0x1fffffff vm1 | VMM: Creating Acpi_platform vm2 | VMM[main]: Loaded ramdisk image rom/ramdisk2-amd64.rd to 1fc00000 (size: 00400000) vm1 | VMM[ACPI]: Acpi timer @ 0xb008 vm1 | VMM[RTC]: Hello from RTC. Irq=8 vm1 | VMM[uart_8250]: Create virtual 8250 console vm1 | VMM: l4rtc.l4vmm,rtccap: capability rtc is invalid. vm1 | VMM[RTC]: l4vmm,rtccap not valid. Will not have wallclock time. vm2 | VMM[PIC]: Hello, Legacy_pic vm1 | VMM[vm]: Device creation for virtual device l4rtc failed. Disabling device. vm1 | VMM: isa_debugport.l4vmm,vcon_cap: capability debug is invalid. vm1 | VMM[vm]: Device creation for virtual device isa_debugport failed. Disabling device. vm2 | VMM: acpi_platform: Failed to get property 'l4vmm,pwrinput': FDT_ERR_NOTFOUND vm2 | VMM: Creating Acpi_platform vm1 | VMM[PCI bus]: Creating host bridge vm2 | VMM[ACPI]: Acpi timer @ 0xb008 vm1 | VMM[Pci_window_alloc]: Init PCI window with range [0x6000, 0xffff IO] vm1 | VMM[Pci_window_alloc]: Init PCI window with range [0xaa000000, 0xaaffffff MMIO32] vm2 | VMM[RTC]: Hello from RTC. Irq=8 vm1 | VMM[Pci_window_alloc]: Init PCI window with range [0x300000000, 0x3ffffffff MMIO64] vm2 | VMM[uart_8250]: Create virtual 8250 console vm1 | VMM[PCI bus]: Registering PCI device 00:00.0 vm1 | VMM[guest]: New mmio mapping: @ b0000000 10000000 vm1 | VMM[PCI bus]: Created & Registered the PCI host bridge vm1 | VMM[VIO Cons]: Create virtual PCI console vm2 | VMM: l4rtc.l4vmm,rtccap: capability rtc is invalid. vm2 | VMM[RTC]: l4vmm,rtccap not valid. Will not have wallclock time. vm2 | VMM[vm]: Device creation for virtual device l4rtc failed. Disabling device. vm2 | VMM: isa_debugport.l4vmm,vcon_cap: capability debug is invalid. vm2 | VMM[vm]: Device creation for virtual device isa_debugport failed. Disabling device. vm1 | VMM[Pci_bridge_windows]: [MMIO32] allocated [0xaa000000, 0xaa001fff] vm1 | VMM[Virt PCI dev]: bar[0] addr=0x0 size=0x2000 type=mmio32 (non-prefetchable) vm1 | VMM[Pci_bridge_windows]: [IO] allocated [0x6000, 0x607f] vm1 | VMM[Virt PCI dev]: bar[1] addr=0x0 size=0x80 type=io vm1 | VMM[PCI bus]: Registering PCI device 00:01.0 vm1 | VMM[VIO Cons]: Console: 0x186b0 vm1 | VMM[VIO proxy]: Creating proxy vm2 | VMM[PCI bus]: Creating host bridge vm1 | VMM[Pci_bridge_windows]: [MMIO32] allocated [0xaa002000, 0xaa003fff] vm1 | VMM[Virt PCI dev]: bar[0] addr=0x0 size=0x2000 type=mmio32 (non-prefetchable) vm1 | VMM[Pci_bridge_windows]: [IO] allocated [0x6080, 0x60ff] vm1 | VMM[Virt PCI dev]: bar[1] addr=0x0 size=0x80 type=io p2p | Registering dataspace from 0x0 with 524288 KiB, offset 0x0 vm2 | VMM[Pci_window_alloc]: Init PCI window with range [0x6000, 0xffff IO] vm2 | VMM[Pci_window_alloc]: Init PCI window with range [0xaa000000, 0xaaffffff MMIO32] vm2 | VMM[Pci_window_alloc]: Init PCI window with range [0x300000000, 0x3ffffffff MMIO64] p2p | PORT[0x15d70]: DMA guest [0-1fffffff] local [600000-205fffff] offset 0 vm2 | VMM[PCI bus]: Registering PCI device 00:00.0 vm2 | VMM[guest]: New mmio mapping: @ b0000000 10000000 vm2 | VMM[PCI bus]: Created & Registered the PCI host bridge p2p | register client: host IRQ: 420010 config DS: 41d000 vm2 | VMM[VIO Cons]: Create virtual PCI console vm1 | VMM[PCI bus]: Registering PCI device 00:02.0 vm1 | VMM[VIO proxy]: Creating proxy vm1 | VMM: virtio_disk@2.l4vmm,virtiocap: capability qdrv is invalid. vm1 | VMM[vm]: Device creation for virtual device virtio_disk@2 failed. Disabling device. vm2 | VMM[Pci_bridge_windows]: [MMIO32] allocated [0xaa000000, 0xaa001fff] vm2 | VMM[Virt PCI dev]: bar[0] addr=0x0 size=0x2000 type=mmio32 (non-prefetchable) vm2 | VMM[Pci_bridge_windows]: [IO] allocated [0x6000, 0x607f] vm1 | VMM: rom@ffc84000.l4vmm,dscap: capability bios_code is invalid. vm2 | VMM[Virt PCI dev]: bar[1] addr=0x0 size=0x80 type=io vm1 | VMM[ROM]: Missing 'l4vmm,dscap' property! vm1 | VMM[vm]: Device creation for virtual device rom@ffc84000 failed. Disabling device. vm2 | VMM[PCI bus]: Registering PCI device 00:01.0 vm2 | VMM[VIO Cons]: Console: 0x186b0 vm1 | VMM: nvm@ffc00000.l4vmm,dscap: capability bios_vars is invalid. vm1 | VMM[CFI]: Missing 'l4vmm,dscap' property! vm1 | VMM[vm]: Device creation for virtual device nvm@ffc00000 failed. Disabling device. vm2 | VMM[VIO proxy]: Creating proxy vm2 | VMM[Pci_bridge_windows]: [MMIO32] allocated [0xaa002000, 0xaa003fff] vm2 | VMM[Virt PCI dev]: bar[0] addr=0x0 size=0x2000 type=mmio32 (non-prefetchable) vm2 | VMM[Pci_bridge_windows]: [IO] allocated [0x6080, 0x60ff] vm2 | VMM[Virt PCI dev]: bar[1] addr=0x0 size=0x80 type=io p2p | Registering dataspace from 0x0 with 524288 KiB, offset 0x0 vm1 | VMM: Created VCPU 1 @ 23000 vm1 | VMM[ram]: Cleaning caches for device tree [20bfe000-20bffb80] ([1fbfe000]) vm1 | VMM: reschedule(): Initiating cpu startup for cap 0x418000/core 0 p2p | PORT[0x15e80]: DMA guest [0-1fffffff] local [20600000-405fffff] offset 0 p2p | register client: host IRQ: 420010 config DS: 41e000 vm2 | VMM[PCI bus]: Registering PCI device 00:02.0 vm2 | VMM[VIO proxy]: Creating proxy vm2 | VMM: virtio_disk@2.l4vmm,virtiocap: capability qdrv is invalid. vm2 | VMM[vm]: Device creation for virtual device virtio_disk@2 failed. Disabling device. vm2 | VMM: rom@ffc84000.l4vmm,dscap: capability bios_code is invalid. vm2 | VMM[ROM]: Missing 'l4vmm,dscap' property! vm2 | VMM[vm]: Device creation for virtual device rom@ffc84000 failed. Disabling device. vm2 | VMM: nvm@ffc00000.l4vmm,dscap: capability bios_vars is invalid. vm2 | VMM[CFI]: Missing 'l4vmm,dscap' property! vm2 | VMM[vm]: Device creation for virtual device nvm@ffc00000 failed. Disabling device. vm1 | VMM[ACPI]: Initialize legacy BIOS ACPI tables. vm1 | VMM: Zeropage @ 0x1000, Kernel @ 0x1000000 vm1 | VMM: Cmd_line: console=hvc0 ramdisk_size=10000 root=/dev/ram0 rw vm2 | VMM: Created VCPU 1 @ 23000 vm1 | VMM: Elf guest zeropage: dtb 0x1fbfdff0, entry 0x1000000 vm2 | VMM[ram]: Cleaning caches for device tree [20bfe000-20bffb80] ([1fbfe000]) vm1 | VMM: cmdline check: console=hvc0 ramdisk_size=10000 root=/dev/ram0 rw vm2 | VMM: reschedule(): Initiating cpu startup for cap 0x418000/core 0 vm1 | VMM[vmmap]: VM map: vm1 | VMM[vmmap]: [ 0:1fffffff]: Ram vm1 | VMM[vmmap]: [b0000000:bfffffff]: Pci_bus_cfg_ecam vm1 | VMM[vmmap]: [fec00000:fec00fff]: Ioapic vm1 | VMM[vmmap]: [fee00000:fee00fff]: Lapic_access_handler vm1 | VMM[main]: Populating guest physical address space vm1 | VMM[mmio]: Mapping [1000000 - 20ffffff] -> [0 - 1fffffff] vm1 | VMM[vmmap]: IOport map: vm1 | VMM[vmmap]: [ 20: 21]: PIC vm1 | VMM[vmmap]: [ 40: 43]: PIT vm1 | VMM[vmmap]: [ 61: 61]: PIT port 61 vm1 | VMM[vmmap]: [ 70: 71]: RTC vm1 | VMM[vmmap]: [ a0: a1]: PIC vm1 | VMM[vmmap]: [ 3f8: 3ff]: UART 8250 vm1 | VMM[vmmap]: [ 510: 51b]: Firmware interface vm1 | VMM[vmmap]: [ cf8: cff]: PCI bus cfg vm1 | VMM[vmmap]: [1800:1808]: ACPI platform vm1 | VMM[vmmap]: [b008:b008]: ACPI Timer vm1 | VMM[guest]: Starting VMM @ 0x1000000 vm1 | VMM[Cpu_dev]: [ 0] Reset called vm1 | VMM[Cpu_dev]: [ 0] Resetting vCPU. vm2 | VMM[ACPI]: Initialize legacy BIOS ACPI tables. vm2 | VMM: Zeropage @ 0x1000, Kernel @ 0x1000000 vm2 | VMM: Cmd_line: console=hvc0 ramdisk_size=10000 root=/dev/ram0 rw vm2 | VMM: Elf guest zeropage: dtb 0x1fbfdff0, entry 0x1000000 vm1 | VMM: Hello clock source for vCPU 0 vm2 | VMM: cmdline check: console=hvc0 ramdisk_size=10000 root=/dev/ram0 rw vm2 | VMM[vmmap]: VM map: vm2 | VMM[vmmap]: [ 0:1fffffff]: Ram vm2 | VMM[vmmap]: [b0000000:bfffffff]: Pci_bus_cfg_ecam vm2 | VMM[vmmap]: [fec00000:fec00fff]: Ioapic vm2 | VMM[vmmap]: [fee00000:fee00fff]: Lapic_access_handler vm2 | VMM[main]: Populating guest physical address space vm2 | VMM[mmio]: Mapping [1000000 - 20ffffff] -> [0 - 1fffffff] vm2 | VMM[vmmap]: IOport map: vm2 | VMM[vmmap]: [ 20: 21]: PIC vm1 | VMM: VM-entry failure due to invalid guest state: vm1 | Exit reason raw: 0x80000021 vm1 | Exit qualification: 0x0 vm2 | VMM[vmmap]: [ 40: 43]: PIT vm1 | IP: 0x100001e vm2 | VMM[vmmap]: [ 61: 61]: PIT port 61 vm1 | Instruction error: 0x0 vm2 | VMM[vmmap]: [ 70: 71]: RTC vm1 | Entry exception error: 0x0 vm2 | VMM[vmmap]: [ a0: a1]: PIC vm1 | VMM: [ 0]: Exit at guest IP 0x100001e SP 0x1a03f4e with 0x80000021 (Qual: 0x0) vm1 | VMM: [ 0]: Unhandled exit reason: VM-entry failure due to invalid guest state (33) vm1 | VMM: FATAL: [ 0]: Failure in VMM -38 vm2 | VMM[vmmap]: [ 3f8: 3ff]: UART 8250 vm1 | VMM: FATAL: [ 0] RAX 0x2213fe9 vm2 | VMM[vmmap]: [ 510: 51b]: Firmware interface vm1 | RBX 0x0 vm2 | VMM[vmmap]: [ cf8: cff]: PCI bus cfg vm1 | RCX 0xc0000101 vm2 | VMM[vmmap]: [1800:1808]: ACPI platform vm1 | RDX 0x2213fea vm2 | VMM[vmmap]: [b008:b008]: ACPI Timer vm1 | RSI 0x1000 vm2 | VMM[guest]: Starting VMM @ 0x1000000 vm1 | RDI 0x1000 vm2 | VMM[Cpu_dev]: [ 0] Reset called vm1 | RSP 0x0 vm2 | VMM[Cpu_dev]: [ 0] Resetting vCPU. vm1 | RBP 0x0 vm1 | R8 0x0 vm1 | R9 0x0 vm1 | R10 0x0 vm1 | R11 0x0 vm1 | R12 0x0 vm1 | R13 0x0 vm1 | R14 0x0 vm1 | R15 0x0 vm1 | RIP 0x100001e vm1 | vCPU RIP 0x1000000 vm1 | VMM: FATAL: [ 0] VM instruction error: 0x0 vm1 | VMM: FATAL: VM entered a fatal state. Halting. vm2 | VMM: Hello clock source for vCPU 0 vm2 | VMM: VM-entry failure due to invalid guest state: vm2 | Exit reason raw: 0x80000021 vm2 | Exit qualification: 0x0 vm2 | IP: 0x100001e vm2 | Instruction error: 0x0 vm2 | Entry exception error: 0x0 vm2 | VMM: [ 0]: Exit at guest IP 0x100001e SP 0x1a03f4e with 0x80000021 (Qual: 0x0) vm2 | VMM: [ 0]: Unhandled exit reason: VM-entry failure due to invalid guest state (33) vm2 | VMM: FATAL: [ 0]: Failure in VMM -38 vm2 | VMM: FATAL: [ 0] RAX 0x2213fe9 vm2 | RBX 0x0 vm2 | RCX 0xc0000101 vm2 | RDX 0x2213fea vm2 | RSI 0x1000 vm2 | RDI 0x1000 vm2 | RSP 0x0 vm2 | RBP 0x0 vm2 | R8 0x0 vm2 | R9 0x0 vm2 | R10 0x0 vm2 | R11 0x0 vm2 | R12 0x0 vm2 | R13 0x0 vm2 | R14 0x0 vm2 | R15 0x0 vm2 | RIP 0x100001e vm2 | vCPU RIP 0x1000000 vm2 | VMM: FATAL: [ 0] VM instruction error: 0x0 vm2 | VMM: FATAL: VM entered a fatal state. Halting.