I had managed to successfully compile and run DOpE + L4 Linux but the keyboard and mouse seem dont't work at all.
Any idea on this? Please advice. Thanks
Below are the menu.lst and output
title L4Linux-2.6 kernel (cd)/boot/L4Linux/bootstrap -modaddr=0x06000000 module (cd)/boot/L4Linux/build/main nowait -nokdb -noserial -jdb_never_stop module (cd)/boot/L4Linux/l4v2/sigma0 module (cd)/boot/L4Linux/l4v2/roottask task modname "loader" allow_cli task modname "bmodfs" attached 6 modules module (cd)/boot/L4Linux/l4v2/events module (cd)/boot/L4Linux/l4v2/names --events module (cd)/boot/L4Linux/l4v2/log module (cd)/boot/L4Linux/l4v2/dm_phys --isa=0x00800000 module (cd)/boot/L4Linux/l4v2/simple_ts -t 300 module (cd)/boot/L4Linux/l4v2/rtc module (cd)/boot/L4Linux/l4v2/l4io --noirq module (cd)/boot/L4Linux/l4v2/l4dope --l4io -f module (cd)/boot/L4Linux/l4v2/bmodfs module (cd)/boot/L4Linux/l4v2/l4linux26.cfg module (cd)/boot/L4Linux/l4v2/libloader.s.so module (cd)/boot/L4Linux/l4v2/libld-l4.s.so module (cd)/boot/l4linux-2.6/vmlinuz module (cd)/boot/L4Linux/drops.rd module (cd)/boot/L4Linux/l4v2/loader --fprov=BMODFS l4linux26.cfg vbeset 0x117
L4 Bootstrapper move modules to 6000000 with offset 5d22000 move module 17 start 1ed2000 -> 7bf4000 move module 16 start ed2000 -> 6bf4000 move module 15 start b1b000 -> 683d000 move module 14 start aa2000 -> 67c4000 move module 13 start a04000 -> 6726000 move module 12 start a03000 -> 6725000 move module 11 start 95b000 -> 667d000 move module 10 start 7e5000 -> 6507000 move module 9 start 5a5000 -> 62c7000 move module 8 start 575000 -> 6297000 move module 7 start 527000 -> 6249000 move module 6 start 48c000 -> 61ae000 move module 5 start 44e000 -> 6170000 move module 4 start 40c000 -> 612e000 move module 3 start 36b000 -> 608d000 move module 2 start 33b000 -> 605d000 move module 1 start 2de000 -> 6000000 Scanning (cd)/boot/L4Linux/build/main -nokdb -serial_esc Scanning (cd)/boot/L4Linux/l4v2/sigma0 Scanning (cd)/boot/L4Linux/l4v2/roottask task modname "loader" allow_cli task modname "bmodfs" attached 5 modules Bootloader MMAP: [ 0, 9fc00) RAM (1) [ 9fc00, a0000) reserved (2) [ e8000, 100000) reserved (2) [ 100000, fff0000) RAM (1) [ fff0000, 10000000) ACPI (3) [ fffc0000, 100000000) reserved (2) Relocated mbi to [0x65000-0x6570e] Loading (cd)/boot/L4Linux/build/main Loading (cd)/boot/L4Linux/l4v2/sigma0 Loading (cd)/boot/L4Linux/l4v2/roottask find kernel info page... found kernel info page at 0x1000 [ 1000, 64fff] Kern (cd)/boot/L4Linux/build/main [ 65000, 6580b] Root Multiboot info [ 9fc00, 9ffff] Arch BIOS [ e8000, fffff] Arch BIOS [ 100000, 10837f] Sigma0 (cd)/boot/L4Linux/l4v2/sigma0 [ 110000, 2aefff] Root (cd)/boot/L4Linux/l4v2/roottask [ 2d0000, 2dae5f] Boot bootstrap [ 300000, 38fd2f] Kern (cd)/boot/L4Linux/build/main [ 612e000, 7cd2eb1] Root Modules Memory [ fff0000, fffffff] Arch BIOS [ fffc0000, ffffffff] Arch BIOS API Version: (87) experimental Sigma0 config ip:00103f28 sp:002daa20 Roottask config ip:00110000 sp:00000000 Starting kernel (cd)/boot/L4Linux/build/main at 003008b4
Welcome to Fiasco(ia32)! DD-L4(v2)/ia32 microkernel (C) 1998-2009 TU Dresden Rev: r429 compiled with gcc 4.3.2 for Intel Pentium [] Performance-critical config option(s) detected: CONFIG_NDEBUG is off CONFIG_NO_FRAME_PTR is off
Enabling special fully nested mode for PIC Using the PIT (i8254) on IRQ 0 for scheduling SERIAL ESC: allocated IRQ 4 for serial uart SERIAL ESC: allocated IRQ 4 for serial uart Not using serial hack in slow timer handler. Absolute KIP Syscalls using: Sysenter CPU: GenuineIntel (6:3:3:0) Model: Pentium II (Klamath) at 1795 MHz
32 KB L1 I Cache (8-way associative, 64 bytes per line) 32 KB L1 D Cache (8-way associative, 64 bytes per line) 2048 KB L2 U Cache (8-way associative, 64 bytes per line)
Freeing init code/data: 24576 bytes (6 pages)
Calibrating timer loop... done. SIGMA0: Hello! KIP @ 1000 Found Fiasco: KIP syscalls: yes allocated 4KB for maintenance structures
Roottask. Command line found: "(cd)/boot/L4Linux/l4v2/roottask task modname "loader" allow_cli task modname "bmodfs" attached 5 modules"
261695kB ( 255MB) total RAM (reported by bootloader) 234912kB ( 230MB) received RAM from Sigma0 29964kB ( 30MB) reserved RAM for RMGR Received I/O ports 0000-ffff Attached irqs = [ <!0> 1 <!2> 3 <!4> 5 6 7 8 9 A B C D E F 10 11 ]
Roottask: Parsing command line config. configured task 0x00 (loader): vm_offs:0 irq:3ffff lmcp:ffff allow_cli:1 mcp:ff prio:10 small:ff mods:0 configured task 0x00 (bmodfs): vm_offs:0 irq:3ffff lmcp:ffff allow_cli:0 mcp:ff prio:10 small:ff mods:5
Roottask: Loading 14 modules. #05: loading "(cd)/boot/L4Linux/l4v2/names" from [0612e000-0616fc16] to [002d0000-002d6a37][002d7000-002e2000] entry at 0005f378 via trampoline page code symbols at [0eb74000-0eb76000] (8kB), lines at [0eb6e000-0eb74000] (24kB) #06: loading "(cd)/boot/L4Linux/l4v2/log" from [06170000-061add0b] to [00400000-00406eca][00407000-00439808] entry at 00060374 via trampoline page code symbols at [0eb6c000-0eb6e000] (8kB), lines at [0eb66000-0eb6c000] (24kB) #07: loading "(cd)/boot/L4Linux/l4v2/dm_phys --isa=0x00800000" from [061ae000-062488b8] to [01500000-01513cb7][01514000-0151e000] entry at 00061388 via trampoline page code symbols at [0eb61000-0eb66000] (20kB), lines at [0eb53000-0eb61000] (56kB) #08: loading "(cd)/boot/L4Linux/l4v2/simple_ts -t 300" from [06249000-06296314] to [01400000-01408dea][01409000-014185e8] entry at 00062380 via trampoline page code symbols at [0eb51000-0eb53000] (8kB), lines at [0eb49000-0eb51000] (32kB) #09: loading "(cd)/boot/L4Linux/l4v2/rtc" from [06297000-062c6a60] to [01080000-010845c0][01085000-0108a000] entry at 00063374 via trampoline page code symbols at [0eb47000-0eb49000] (8kB), lines at [0eb42000-0eb47000] (20kB) #0a: loading "(cd)/boot/L4Linux/l4v2/l4io" from [062c7000-06506914] to [00c20000-00c44dd5][00c45000-00cb3000] entry at 00064374 via trampoline page code symbols at [0eaec000-0eb42000] (344kB), lines at [0ead2000-0eaec000] (104kB) #0b: loading "(cd)/boot/L4Linux/l4v2/l4dope --l4io" from [06507000-0667cef5] to [01b00000-01b45999][01b46000-01b8b000] entry at 00066380 via trampoline page code symbols at [0eac4000-0ead2000] (56kB), lines at [0ea97000-0eac4000] (180kB) #0c: loading "(cd)/boot/L4Linux/l4v2/bmodfs" from [0667d000-067243fc] to [01220000-01238169][01239000-01250000] passing module (cd)/boot/L4Linux/l4v2/l4linux26.cfg [ 06725000-0672509c ] passing module (cd)/boot/L4Linux/l4v2/libloader.s.so [ 06726000-067c33d6 ] passing module (cd)/boot/L4Linux/l4v2/libld-l4.s.so [ 067c4000-0683ce55 ] passing module (cd)/boot/l4linux-2.6/vmlinuz [ 0683d000-06bf3183 ] passing module (cd)/boot/L4Linux/drops.rd [ 06bf4000-07bf4000 ] entry at 0006747c via trampoline page code symbols at [0ea92000-0ea97000] (20kB), lines at [0ea7f000-0ea92000] (76kB) #0d: loading "(cd)/boot/L4Linux/l4v2/loader --fprov=BMODFS l4linux26.cfg" from [07bf4000-07cd2eb2] to [01300000-01328b49][01329000-01348000] entry at 00068394 via trampoline page code symbols at [0ea78000-0ea7f000] (28kB), lines at [0ea5e000-0ea78000] (104kB)
ROOT: Sending ports 0070-0070 to task #09 ROOT: Sending ports 0080-0080 to task #09 ROOT: Sending ports 0071-0071 to task #09 rtc | Date:08.04.2009 Time:02:20:22 simplets| Configured for 300 tasks. loader | Can't map tbuf status page l4dope | (cd)/boot/L4Linux/l4v2/l4dope: unrecognized option `--l4io' l4dope | DOpE(init): unknown option! bmodfs | Passed the following modules: bmodfs | module "(cd)/boot/L4Linux/l4v2/l4linux26.cfg" (1kB) bmodfs | module "(cd)/boot/L4Linux/l4v2/libloader.s.so" (629kB) bmodfs | module "(cd)/boot/L4Linux/l4v2/libld-l4.s.so" (484kB) bmodfs | module "(cd)/boot/l4linux-2.6/vmlinuz" (3801kB) bmodfs | module "(cd)/boot/L4Linux/drops.rd" (16384kB) io | Using platform configuration 'x86' ROOT: Sending ports 0cfb-0cfb to task #0a ROOT: Sending ports 0cf8-0cfb to task #0a ROOT: Sending ports 0cfe-0cff to task #0a io | PCI: Using configuration type 1 io | PCI: Probing PCI hardware io | PCI: Probing PCI hardware (bus 00) ROOT: Sending ports 0cfc-0cff to task #0a io | PCI: PIIX3: Enabling Passive Release on 00:01.0 io | Limiting direct PCI/PCI transfers. io | Activating ISA DMA hang workarounds. io | 00000000-ffffffff : PCI mem io | f0000000-f1ffffff : Cirrus Logic GD 5446 io | f2000000-f2000fff : Cirrus Logic GD 5446 io | 0000-ffff : PCI IO io | 0cf8-0cff : PCI conf1 io | b000-b03f : Intel Corporation 82371AB/EB/MB PIIX4 ACPI io | b100-b11f : Intel Corporation 82371AB/EB/MB PIIX4 ACPI io | c000-c00f : Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] io | c020-c03f : Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] io | c100-c1ff : Realtek Semiconductor Co., Ltd. RTL-8029(AS) loader | sleeping for 1000 ms io | Available IRQs=[ <!0> 1 <!2> 3 <!4> 5 6 7 8 9 a b c d e f 10 11 ] l4dope | L4INPUT native mode activated l4dope | L4INPUT: !!! W A R N I N G !!! l4dope | L4INPUT: Please, do not use Fiasco's "-esc" with L4INPUT. l4dope | L4INPUT: !!! W A R N I N G !!! ROOT: Sending ports 0060-006f to task #0a l4dope | Failed to disable AUX port, but continuing anyway... Is this a SiS? l4dope | If AUX port is really absent please use the 'i8042.noaux' option. l4dope | serio: i8042 KBD port at 0x60,0x64 irq 1 l4dope | input: AT Raw Set 2 keyboard on isa0060/serio0 l4dope | input: PC Speaker l4dope | input: L4 input event injector l4dope | L4 input event injector: IRQ handler up l4dope | connect "AT Raw Set 2 keyboard", isa0060/serio0/input0 l4dope | connect "PC Speaker", isa0061/input0 l4dope | connect "L4 input event injector", l4/sys l4dope | SharedMem(alloc): hl.raw=e0000, id=3b, size=800 l4dope | SharedMem(get_adr): address = 0x5000 l4dope | SharedMem(alloc): hl.raw=e0000, id=3c, size=800 l4dope | SharedMem(get_adr): address = 0x6000 l4dope | SharedMem(alloc): hl.raw=e0000, id=3d, size=800 l4dope | SharedMem(get_adr): address = 0x7000 l4dope | SharedMem(alloc): hl.raw=e0000, id=3e, size=800 l4dope | SharedMem(get_adr): address = 0xd000 l4dope | SharedMem(alloc): hl.raw=e0000, id=3f, size=800 l4dope | SharedMem(get_adr): address = 0xe000 l4dope | SharedMem(alloc): hl.raw=e0000, id=40, size=800 l4dope | SharedMem(get_adr): address = 0xf000 l4dope | SharedMem(alloc): hl.raw=e0000, id=42, size=800 l4dope | SharedMem(get_adr): address = 0x16000 l4dope | SharedMem(alloc): hl.raw=e0000, id=47, size=484 l4dope | SharedMem(get_adr): address = 0x20000 l4dope | dope: paddr=f0000000 size=4096KiB l4dope | Mapped video memory at f0000000 to 00400000+000000 [4096kB] via L4IO l4dope | mapping: vaddr=0x400000 size=4194304(0x400000) offset=0(0x0) l4dope | Frame buffer base: 0x400000 l4dope | Resolution: 1024x768x16 l4dope | Bytes per scanline: 2048 l4dope | Current video mode is 1024x768 red=11:5 green=5:6 blue=0:5 res=0:0 loader | vmlinuz: Starting application using libld-l4.s.so loader | vmlinuz,#e: Loading binary loader | vmlinuz,#e: Loading ldso loader | vmlinuz,#e: Starting libld-l4.s.so at 000138e0 via 0000cc30 l4lx | ======> L4Linux 2.6 starting... <======== l4lx | Linux version 2.6.28-l4-svn143 (root@debian) (gcc version 4.3.2 (Debi l4lx : an 4.3.2-1.1) ) #1 Mon Mar 23 15:24:51 MYT 2009 l4lx | Binary name: vmlinuz l4lx | Linux kernel command line (7 args): mem=64M load_ramdisk=1 ramdisk_si l4lx : ze=16384 root=/dev/ram l4env_rd=drops.rd nosmp isolcpus=0 l4lx | Image: 00400000 - 007f2000 [4040 KiB]. l4lx | Areas: Text: 00400000 - 006f6000 [3032kB] (a bit longer) l4lx | Data: 006f6000 - 0071d6d4 [157kB] l4lx | Initdata: 00720000 - 00761000 [260kB] l4lx | BSS: 00762000 - 007f1030 [572kB] l4lx | l4lx_thread_create: Created thread 0e.03 (tamer0) l4lx | Tamer0 is 0e.03 l4lx | Using tamed mode. ROOT: Sending all ports (for cli/sti) to task #0d l4lx | Got 65536 out of 65536 I/O ports l4lx | Connecting to l4io server. l4lx | l4env_linux_startup thread 4. l4lx | l4lx_thread_create: Created thread 0e.04 (cpu0) l4lx | main thread will be 0e.04 l4lx | l4env_register_pointer_section: addr = 006f6000 size = 1032192 l4lx | sec-w-init: virt: 0x006f6000 to 0x007f1fff [1008 KiB] l4lx | sec-w-init: Number of physical regions: 1, 1032192 Bytes l4lx | sec-w-init: 1: Phys: 0x00dee000 to 0x00eea000, Size: 1032192 l4lx | main thread: received startup message. l4lx | memory_setup: mem=64M load_ramdisk=1 ramdisk_size=16384 root=/dev/ram l4lx : l4env_rd=drops.rd nosmp isolcpus=0 l4lx | setup_l4env_memory: Forcing superpages for main memory l4lx | Main thread running, waiting... l4lx | Main memory size: 64MB l4lx | Got 2048kB of ISA DMA memory. l4lx | ISA DMA memory: virt: 0x00800000 to 0x009fffff [2048 KiB] l4lx | ISA DMA memory: Number of physical regions: 1, 2097152 Bytes l4lx | ISA DMA memory: 1: Phys: 0x0043a000 to 0x0063a000, Size: 2097152 l4lx | Main memory: virt: 0x00c00000 to 0x04bfffff [65536 KiB] l4lx | Main memory: Number of physical regions: 1, 67108864 Bytes l4lx | Main memory: 1: Phys: 0x02000000 to 0x06000000, Size: 67108864 l4lx | Filling lower ptabs... l4lx | mainmem = c00000 l4lx | Done (1481 entries). l4lx | l4env_register_pointer_section: addr = 006f6000 size = 1032192 l4lx | end: virt: 0x006f6000 to 0x007f1fff [1008 KiB] l4lx | end: Number of physical regions: 1, 1032192 Bytes l4lx | end: 1: Phys: 0x00dee000 to 0x00eea000, Size: 1032192 l4lx | memory_setup done l4lx | l4env_rd_path: drops.rd l4lx | Loading: drops.rd l4lx | INITRD: Size of RAMdisk is 16384KiB l4lx | RAMdisk from 04c00000 to 05c00000 [16384KiB] l4lx | l4lx_thread_create: Created thread 0e.05 (timer.i0) l4lx | Jumping over 4x 'hlt' at 0x729944 l4lx | idler0: utcb=0xbff00400 0e.04 l4lx | l4lx_thread_create: Created thread 0e.06 (idler0) l4lx | Starting L4FB via DOpE l4dope | SharedMem(alloc): hl.raw=e0000, id=7b, size=96000 l4dope | SharedMem(get_adr): address = 0x800000 l4lx | l4lx_thread_create: Created thread 0e.08 (DOpE refresher) l4lx | l4lx_thread_create: Created thread 0e.09 (L4DOpEinput) l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 14. l4lx | l4lx_thread_create: Created thread 0e.0a (IRQ14) l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 15. l4lx | l4lx_thread_create: Created thread 0e.0b (IRQ15) l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 11. l4lx | l4lx_thread_create: Created thread 0e.0c (IRQ11)