Thanks Christian,

it works after i removed the l4/pkg/usbhid. recompiled the l4/pkg/usb and replaced them. it works perfectly on DOpE

but errors come out when i tried to load the l4linux26 inside

the usbcore disconnect the usb mouse when loading the l4linux. is it that i had did the wrong setup when compiling the l4linux?

Welcome to Fiasco(ia32)!
DD-L4(v2)/ia32 microkernel (C) 1998-2009 TU Dresden
Rev: r438 compiled with gcc 4.3.2 for Intel Pentium    []
Performance-critical config option(s) detected:
  CONFIG_NDEBUG is off
  CONFIG_NO_FRAME_PTR is off

Enabling special fully nested mode for PIC
Using the PIT (i8254) on IRQ 0 for scheduling
SERIAL ESC: allocated IRQ 4 for serial uart
SERIAL ESC: allocated IRQ 4 for serial uart
Not using serial hack in slow timer handler.
Absolute KIP Syscalls using: Sysenter
CPU: GenuineIntel (6:3:3:0) Model: Pentium II (Klamath) at 1796 MHz

  32 KB L1 I Cache (8-way associative, 64 bytes per line)
  32 KB L1 D Cache (8-way associative, 64 bytes per line)
2048 KB L2 U Cache (8-way associative, 64 bytes per line)

Freeing init code/data: 24576 bytes (6 pages)

Calibrating timer loop... done.
SIGMA0: Hello!
  KIP @ 1000
  Found Fiasco: KIP syscalls: yes
  allocated 4KB for maintenance structures


Roottask.
  Command line found: "(cd)/boot/l4/l4env/roottask task modname "loader" allow_cli task modname "bmodfs" attached 5 modules"

  261695kB ( 255MB) total RAM (reported by bootloader)
  234336kB ( 229MB) received RAM from Sigma0
   34636kB (  34MB) reserved RAM for RMGR
  Received I/O ports 0000-ffff
  Attached irqs = [ <!0> 1 <!2> 3 <!4> 5 6 7 8 9 A B C D E F 10 11 ]

Roottask: Parsing command line config.
  configured task 0x00 (loader):
    vm_offs:0 irq:3ffff lmcp:ffff allow_cli:1 mcp:ff prio:10 small:ff mods:0
  configured task 0x00 (bmodfs):
    vm_offs:0 irq:3ffff lmcp:ffff allow_cli:0 mcp:ff prio:10 small:ff mods:5

Roottask: Loading 17 modules.
#05: loading "(cd)/boot/l4/l4env/events"
     from [0612e000-0616fe99] to [01540000-01549190][0154a000-0155f590]
     entry at 0005f374 via trampoline page code
     symbols at [0eb74000-0eb76000] (8kB), lines at [0eb6d000-0eb74000] (28kB)
#06: loading "(cd)/boot/l4/l4env/names --events"
     from [06170000-061b1c12] to [002d0000-002d6a37][002d7000-002e2000]
     entry at 0006037c via trampoline page code
     symbols at [0eb6b000-0eb6d000] (8kB), lines at [0eb65000-0eb6b000] (24kB)
#07: loading "(cd)/boot/l4/l4env/log"
     from [061b2000-061efd07] to [00400000-00406eca][00407000-00439808]
     entry at 00061370 via trampoline page code
     symbols at [0eb63000-0eb65000] (8kB), lines at [0eb5d000-0eb63000] (24kB)
#08: loading "(cd)/boot/l4/l4env/dm_phys --isa=0x00800000"
     from [061f0000-0628a8b4] to [01500000-01513cb7][01514000-0151e000]
     entry at 00062384 via trampoline page code
     symbols at [0eb58000-0eb5d000] (20kB), lines at [0eb4a000-0eb58000] (56kB)
#09: loading "(cd)/boot/l4/l4env/simple_ts -t 300"
     from [0628b000-062d8310] to [01400000-01408dea][01409000-014185e8]
     entry at 0006337c via trampoline page code
     symbols at [0eb48000-0eb4a000] (8kB), lines at [0eb40000-0eb48000] (32kB)
#0a: loading "(cd)/boot/l4/l4env/rtc"
     from [062d9000-06308a5c] to [01080000-010845c0][01085000-0108a000]
     entry at 00064370 via trampoline page code
     symbols at [0eb3e000-0eb40000] (8kB), lines at [0eb39000-0eb3e000] (20kB)
#0b: loading "(cd)/boot/l4/l4env/l4io"
     from [06309000-0654a391] to [00c20000-00c45315][00c46000-00cb4000]
     entry at 00066370 via trampoline page code
     symbols at [0eae3000-0eb39000] (344kB), lines at [0eac9000-0eae3000] (104kB)
#0c: loading "(cd)/boot/l4/l4env/l4dope"
     from [0654b000-066c2384] to [01b00000-01b45ef1][01b46000-01b8b000]
     entry at 00067374 via trampoline page code
     symbols at [0eabb000-0eac9000] (56kB), lines at [0ea8d000-0eabb000] (184kB)
#0d: loading "(cd)/boot/l4/usb/usbcore"
     from [066c3000-068faac1] to [008e0000-0092600d][00927000-0094c000]
     entry at 00068374 via trampoline page code
     symbols at [0ea81000-0ea8d000] (48kB), lines at [0ea4b000-0ea81000] (216kB)
#0e: loading "(cd)/boot/l4/usb/usbhid"
     from [068fb000-06b0a851] to [00cc0000-00cffecd][00d00000-00d24000]
     entry at 00069370 via trampoline page code
     symbols at [0ea40000-0ea4b000] (44kB), lines at [0ea11000-0ea40000] (188kB)
#0f: loading "(cd)/boot/l4/l4env/bmodfs"
     from [06b0b000-06bb2f8d] to [01220000-01238689][01239000-01250000]
     passing module (cd)/boot/l4/cfg/l4linux26.cfg        [ 06bb3000-06bb3165 ]
     passing module (cd)/boot/l4/l4env/libloader.s.so     [ 06bb4000-06c52f11 ]
     passing module (cd)/boot/l4/l4env/libld-l4.s.so      [ 06c53000-06ccc219 ]
     passing module (cd)/boot/l4/l4linux/vmlinuz          [ 06ccd000-07083183 ]
     passing module (cd)/boot/l4/l4linux/drops.rd         [ 07084000-08084000 ]
     entry at 0006a46c via trampoline page code
     symbols at [0ea0c000-0ea11000] (20kB), lines at [0e9f9000-0ea0c000] (76kB)
#10: loading "(cd)/boot/l4/l4env/loader --fprov=BMODFS l4linux26.cfg"
     from [08084000-08162b6d] to [01300000-013291c9][0132a000-01349000]
     entry at 0006b390 via trampoline page code
     symbols at [0e9f2000-0e9f9000] (28kB), lines at [0e9d8000-0e9f2000] (104kB)

ROOT: Sending ports 0070-0070 to task #0a
ROOT: Sending ports 0080-0080 to task #0a
ROOT: Sending ports 0071-0071 to task #0a
names   | Starting thread listening for `exit' events
rtc     | Date:29.04.2009 Time:09:33:00
simplets| Configured for 300 tasks.
bmodfs  | Passed the following modules:
bmodfs  |   module "(cd)/boot/l4/cfg/l4linux26.cfg" (1kB)
bmodfs  |   module "(cd)/boot/l4/l4env/libloader.s.so" (636kB)
bmodfs  |   module "(cd)/boot/l4/l4env/libld-l4.s.so" (485kB)
bmodfs  |   module "(cd)/boot/l4/l4linux/vmlinuz" (3801kB)
bmodfs  |   module "(cd)/boot/l4/l4linux/drops.rd" (16384kB)
loader  | Can't map tbuf status page
usbcore | main(): DDE USB CORE initiaizing:
usbcore | main(): Initializing DDE base system.
loader  | sleeping for 1000 ms
io      | Using platform configuration 'x86'
ROOT: Sending ports 0cfb-0cfb to task #0b
ROOT: Sending ports 0cf8-0cfb to task #0b
ROOT: Sending ports 0cfe-0cff to task #0b
io      | PCI: Using configuration type 1
io      | PCI: Probing PCI hardware
io      | PCI: Probing PCI hardware (bus 00)
ROOT: Sending ports 0cfc-0cff to task #0b
usbhid  | main(): DDEUSB client side initiaizing:
io      | PCI: PIIX3: Enabling Passive Release on 00:01.0
io      | Limiting direct PCI/PCI transfers.
io      | Activating ISA DMA hang workarounds.
io      | 00000000-ffffffff : PCI mem
io      |   f0000000-f1ffffff : Cirrus Logic GD 5446
io      |   f2000000-f2000fff : Cirrus Logic GD 5446
io      | 0000-ffff : PCI IO
io      |   0cf8-0cff : PCI conf1
io      |   b000-b03f : Intel Corporation 82371AB/EB/MB PIIX4 ACPI
io      |   b100-b11f : Intel Corporation 82371AB/EB/MB PIIX4 ACPI
io      |   c000-c00f : Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]
io      |   c020-c03f : Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II]
io      |   c100-c1ff : Realtek Semiconductor Co., Ltd. RTL-8029(AS)
io      | Available IRQs=[ <!0> 1 <!2> 3 <!4> 5 6 7 8 9 a b c d e f 10 11 ]
usbhid  | Softirq daemon starting
usbhid  | Initializing DDE page cache
usbhid  | <6>usbcore: registered new interface driver hub
usbhid  | <6>usbcore: registered new device driver usb
usbhid  | unimplemented: pci_fixup_device
usbhid  | unimplemented: pci_fixup_device
usbhid  | _add_ddekit_device: Detected device: 8086:7000
usbhid  | unimplemented: pci_fixup_device
usbhid  | unimplemented: pci_fixup_device
usbhid  | _add_ddekit_device: Detected device: 8086:7010
usbhid  | unimplemented: pci_fixup_device
usbhid  | unimplemented: pci_fixup_device
usbhid  | _add_ddekit_device: Detected device: 8086:7020
usbhid  | unimplemented: pci_fixup_device
usbhid  | unimplemented: pci_fixup_device
usbhid  | _add_ddekit_device: Detected device: 8086:7113
usbhid  | unimplemented: pci_fixup_device
usbhid  | unimplemented: pci_fixup_device
usbhid  | _add_ddekit_device: Detected device: 1013:b8
usbhid  | unimplemented: pci_fixup_device
usbhid  | unimplemented: pci_fixup_device
usbhid  | _add_ddekit_device: Detected device: 10ec:8029
l4dope  | L4INPUT native mode activated
l4dope  | L4INPUT:                !!! W A R N I N G !!!
usbcore | main(): Initializing DDE kmalloc.
usbcore | main(): Initializing DDE process.
usbcore | main(): Initializing DDE timers.
l4dope  | L4INPUT:  Please, do not use Fiasco's "-esc" with L4INPUT.
l4dope  | L4INPUT:                !!! W A R N I N G !!!
ROOT: Sending ports 0060-006f to task #0b
usbcore | main(): Initializing DDE softirq.
l4dope  | Failed to disable AUX port, but continuing anyway... Is this a SiS?
l4dope  | If AUX port is really absent please use the 'i8042.noaux' option.
l4dope  | serio: i8042 KBD port at 0x60,0x64 irq 1
usbcore | Softirq daemon starting
usbcore | main(): Doing initcalls...
usbcore | Initializing DDE page cache
usbhid  | <6>/home/user/Desktop/tudos/l4/pkg/usb/lib/libddeusb26/src/ddeusb_vhc
usbhid  : d.c: driver ddeusb_vhcd, DDEUSB Virtual Host Controller
usbhid  |
usbhid  | <6>ddeusb_vhcd ddeusb_vhcd: DDEUSB Virtual Host Controller
usbhid  | <6>ddeusb_vhcd ddeusb_vhcd: new USB bus registered, assigned bus numb
usbhid  : er 1
usbhid  | going to init root hub
usbhid  | <6>usb usb1: configuration #1 chosen from 1 choice
usbhid  | <6>hub 1-0:1.0: USB hub found
usbhid  | <6>hub 1-0:1.0: 13 ports detected
usbcore | <6>usbcore: registered new interface driver hub
usbcore | <6>usbcore: registered new device driver usb
usbcore | unimplemented: pci_fixup_device
usbcore | unimplemented: pci_fixup_device
usbcore | _add_ddekit_device: Detected device: 8086:7000
usbcore | unimplemented: pci_fixup_device
usbcore | unimplemented: pci_fixup_device
usbcore | _add_ddekit_device: Detected device: 8086:7010
usbcore | unimplemented: pci_fixup_device
usbcore | unimplemented: pci_fixup_device
usbcore | _add_ddekit_device: Detected device: 8086:7020
usbcore | unimplemented: pci_fixup_device
usbcore | unimplemented: pci_fixup_device
usbcore | _add_ddekit_device: Detected device: 8086:7113
usbcore | unimplemented: pci_fixup_device
usbcore | unimplemented: pci_fixup_device
usbcore | _add_ddekit_device: Detected device: 1013:b8
usbcore | unimplemented: pci_fixup_device
usbcore | unimplemented: pci_fixup_device
usbcore | _add_ddekit_device: Detected device: 10ec:8029
usbcore | <6>usbcore: registered new interface driver ddeusb
usbcore | <7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Dri
usbcore : ver (PCI)
usbcore | <6>USB Universal Host Controller Interface driver v3.0
ROOT: Sending ports c020-c03f to task #0b
io      | PCI: Setting latency timer of device 00:01.2 to 64
usbcore | <6>uhci_hcd 0000:00:02.0: UHCI Host Controller
usbcore | <6>uhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number
usbcore :  1
usbcore | <6>uhci_hcd 0000:00:02.0: irq 9, io base 0x0000c020
usbcore | going to init root hub
usbcore | <6>usb usb1: configuration #1 chosen from 1 choice
usbcore | <6>hub 1-0:1.0: USB hub found
usbcore | <6>hub 1-0:1.0: 2 ports detected
l4dope  | input: AT Raw Set 2 keyboard on isa0060/serio0
l4dope  | input: PC Speaker
l4dope  | input: L4 input event injector
l4dope  | L4 input event injector: IRQ handler up
l4dope  | connect "AT Raw Set 2 keyboard", isa0060/serio0/input0
l4dope  | connect "PC Speaker", isa0061/input0
l4dope  | connect "L4 input event injector", l4/sys
l4dope  | SharedMem(alloc): hl.raw=100000, id=68, size=800
l4dope  | SharedMem(get_adr): address = 0x5000
l4dope  | SharedMem(alloc): hl.raw=100000, id=69, size=800
l4dope  | SharedMem(get_adr): address = 0x6000
l4dope  | SharedMem(alloc): hl.raw=100000, id=6a, size=800
l4dope  | SharedMem(get_adr): address = 0x7000
l4dope  | SharedMem(alloc): hl.raw=100000, id=6b, size=800
l4dope  | SharedMem(get_adr): address = 0xd000
l4dope  | SharedMem(alloc): hl.raw=100000, id=6c, size=800
l4dope  | SharedMem(get_adr): address = 0xe000
l4dope  | SharedMem(alloc): hl.raw=100000, id=6d, size=800
l4dope  | SharedMem(get_adr): address = 0xf000
l4dope  | SharedMem(alloc): hl.raw=100000, id=6f, size=800
l4dope  | SharedMem(get_adr): address = 0x16000
l4dope  | SharedMem(alloc): hl.raw=100000, id=74, size=484
l4dope  | SharedMem(get_adr): address = 0x20000
l4dope  | dope: paddr=f0000000 size=4096KiB
l4dope  | Mapped video memory at f0000000 to 00400000+000000 [4096kB] via L4IO
l4dope  | mapping: vaddr=0x400000 size=4194304(0x400000) offset=0(0x0)
l4dope  | Frame buffer base:  0x400000
l4dope  | Resolution:         1024x768x16
l4dope  | Bytes per scanline: 2048
usbhid  | going to root:whub poll
l4dope  | Current video mode is 1024x768 red=11:5 green=5:6 blue=0:5 res=0:0
usbcore | going to root:whub poll
usbcore | unimplemented: pci_fixup_device
usbcore | unimplemented: pci_fixup_device
usbcore | unimplemented: pci_fixup_device
usbcore | unimplemented: pci_fixup_device
usbcore | unimplemented: pci_fixup_device
usbcore | unimplemented: pci_fixup_device
usbcore | main(): Registered at names.
usbcore | main(): READY.
usbhid  | libddeusb_server_loop(): d_urbs @ 0x00180004
usbcore | ddeusb_core_ddeusb_setup_control_ds_component(): Attached control dat
usbcore : a space (size :d5b88, offset: 4)          returned 0 (mapped to 0x001
usbcore : 80004)
usbhid  | <6>usbcore: registered new interface driver usbhid
usbhid  | <6>/home/user/Desktop/tudos/l4/pkg/usb/examples/usbhid/src/contrib/dr
usbhid  : iver/usb/input/hid-core.c: v2.6:USB HID core driver
usbhid  | unimplemented: pci_fixup_device
usbhid  | unimplemented: pci_fixup_device
usbhid  | unimplemented: pci_fixup_device
usbhid  | unimplemented: pci_fixup_device
usbhid  | unimplemented: pci_fixup_device
usbhid  | unimplemented: pci_fixup_device
usbhid  | main(): found l4i_proxy at c.6
usbcore | <6>usb 1-2: new full speed USB device using uhci_hcd and address 2
usbcore | <6>usb 1-2: configuration #1 chosen from 1 choice
loader  | vmlinuz: Starting application using libld-l4.s.so
loader  | vmlinuz,#11: Loading binary
loader  | vmlinuz,#11: Loading ldso
loader  | vmlinuz,#11: Starting libld-l4.s.so at 000138e0 via 0000cc40
usbhid  | <6>usb 1-1: new full speed USB device using ddeusb_vhcd and address 2
usbhid  | <6>usb 1-1: configuration #1 chosen from 1 choice
l4lx    | ======> L4Linux 2.6 starting... <========
l4lx    | Linux version 2.6.28-l4-svn143 (user@debian) (gcc version 4.3.2 (Debi
l4lx    : an 4.3.2-1.1) ) #2 Fri Mar 6 21:57:21 MYT 2009
l4lx    | Binary name: vmlinuz
l4lx    | Linux kernel command line (5 args): mem=64M load_ramdisk=1 ramdisk_si
l4lx    : ze=16384 root=/dev/ram l4env_rd=drops.rd
l4lx    | Image: 00400000 - 007f2000 [4040 KiB].
l4lx    | Areas: Text:     00400000 - 006f6000 [3032kB] (a bit longer)
l4lx    |        Data:     006f6000 - 0071d6d4 [157kB]
l4lx    |        Initdata: 00720000 - 00761000 [260kB]
l4lx    |        BSS:      00762000 - 007f1030 [572kB]
l4lx    | l4lx_thread_create: Created thread 11.03 (tamer0)
l4lx    | Tamer0 is 11.03
l4lx    | Using tamed mode.
ROOT: Sending all ports (for cli/sti) to task #10
l4lx    | Got 65536 out of 65536 I/O ports
l4lx    | Connecting to l4io server.
l4lx    | l4env_linux_startup thread 4.
l4lx    | l4lx_thread_create: Created thread 11.04 (cpu0)
l4lx    | main thread will be 11.04
l4lx    | l4env_register_pointer_section: addr = 006f6000 size = 1032192
l4lx    |      sec-w-init: virt: 0x006f6000 to 0x007f1fff [1008 KiB]
l4lx    |      sec-w-init: Number of physical regions: 1, 1032192 Bytes
l4lx    |      sec-w-init: 1: Phys: 0x01b8b000 to 0x01c87000, Size:  1032192
l4lx    | main thread: received startup message.
l4lx    | memory_setup: mem=64M load_ramdisk=1 ramdisk_size=16384 root=/dev/ram
l4lx    :  l4env_rd=drops.rd
l4lx    | setup_l4env_memory: Forcing superpages for main memory
l4lx    | Main thread running, waiting...
l4lx    | Main memory size: 64MB
l4lx    | Got 2048kB of ISA DMA memory.
l4lx    |  ISA DMA memory: virt: 0x00800000 to 0x009fffff [2048 KiB]
l4lx    |  ISA DMA memory: Number of physical regions: 1, 2097152 Bytes
l4lx    |  ISA DMA memory: 1: Phys: 0x0043a000 to 0x0063a000, Size:  2097152
l4lx    |     Main memory: virt: 0x00c00000 to 0x04bfffff [65536 KiB]
l4lx    |     Main memory: Number of physical regions: 1, 67108864 Bytes
l4lx    |     Main memory: 1: Phys: 0x02400000 to 0x06400000, Size: 67108864
l4lx    | Filling lower ptabs...
l4lx    | mainmem = c00000
usbhid  | <6>input: QEMU 0.9.1 QEMU USB Mouse as /class/input/input0
usbhid  | connect "QEMU 0.9.1 QEMU USB Mouse"
usbhid  | <6>input: USB HID v0.01 Mouse [QEMU 0.9.1 QEMU USB Mouse] on usb-ddeu
usbhid  : sb_vhcd-1
l4lx    | Done (1481 entries).
l4lx    | l4env_register_pointer_section: addr = 006f6000 size = 1032192
l4lx    |             end: virt: 0x006f6000 to 0x007f1fff [1008 KiB]
l4lx    |             end: Number of physical regions: 1, 1032192 Bytes
l4lx    |             end: 1: Phys: 0x01b8b000 to 0x01c87000, Size:  1032192
l4lx    | memory_setup done
l4lx    | l4env_rd_path: drops.rd
l4lx    | Loading: drops.rd
l4lx    | INITRD: Size of RAMdisk is 16384KiB
l4lx    | RAMdisk from 04c00000 to 05c00000 [16384KiB]
l4lx    | l4lx_thread_create: Created thread 11.05 (timer.i0)
l4lx    | Jumping over 4x 'hlt' at 0x729944
l4lx    | idler0: utcb=0xbff00400 11.04
l4lx    | l4lx_thread_create: Created thread 11.06 (idler0)
l4lx    | Starting L4FB via DOpE
l4dope  | SharedMem(alloc): hl.raw=100000, id=dc, size=96000
l4dope  | SharedMem(get_adr): address = 0x800000
l4lx    | l4lx_thread_create: Created thread 11.08 (DOpE refresher)
l4lx    | l4lx_thread_create: Created thread 11.09 (L4DOpEinput)
usbcore | <6>usb 1-2: USB disconnect, address 2
l4lx    | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 14.
l4lx    | l4lx_thread_create: Created thread 11.0a (IRQ14)
l4lx    | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 15.
l4lx    | l4lx_thread_create: Created thread 11.0b (IRQ15)
l4lx    | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 11.
l4lx    | l4lx_thread_create: Created thread 11.0c (IRQ11)


On Wed, Apr 29, 2009 at 3:42 PM, Neohtm <neohtm@gmail.com> wrote:
Hi all,

I tried to run the tudos-demo-cd.iso with qemu
'qemu -m 256 -cdrom tudos-demo-cd.iso -usbdevice mouse' and it's running perfectly with the usb mouse and keyboard.

but when i tried on the one i'm compiled. the mouse and keyboard not functioning at all and returns a kernel panic.

Please help.....

Regards,
neohtm

Below are the output of the error.


Welcome to Fiasco(ia32)!
DD-L4(v2)/ia32 microkernel (C) 1998-2009 TU Dresden
Rev: r438 compiled with gcc 4.3.2 for Intel Pentium    []
Performance-critical config option(s) detected:
  CONFIG_NDEBUG is off
  CONFIG_NO_FRAME_PTR is off

Enabling special fully nested mode for PIC
Using the PIT (i8254) on IRQ 0 for scheduling
SERIAL ESC: allocated IRQ 4 for serial uart
SERIAL ESC: allocated IRQ 4 for serial uart
Not using serial hack in slow timer handler.
Absolute KIP Syscalls using: Sysenter
CPU: GenuineIntel (6:3:3:0) Model: Pentium II (Klamath) at 1795 MHz

  32 KB L1 I Cache (8-way associative, 64 bytes per line)
  32 KB L1 D Cache (8-way associative, 64 bytes per line)
2048 KB L2 U Cache (8-way associative, 64 bytes per line)

Freeing init code/data: 24576 bytes (6 pages)

Calibrating timer loop... done.
SIGMA0: Hello!
  KIP @ 1000
  Found Fiasco: KIP syscalls: yes
  allocated 4KB for maintenance structures


Roottask.
  Command line found: "(cd)/boot/l4/l4env/roottask task modname "loader" allow_cli task modname "bmodfs" attached 5 modules"

  261695kB ( 255MB) total RAM (reported by bootloader)
  234760kB ( 230MB) received RAM from Sigma0
   34212kB (  34MB) reserved RAM for RMGR
  Received I/O ports 0000-ffff
  Attached irqs = [ <!0> 1 <!2> 3 <!4> 5 6 7 8 9 A B C D E F 10 11 ]

Roottask: Parsing command line config.
  configured task 0x00 (loader):
    vm_offs:0 irq:3ffff lmcp:ffff allow_cli:1 mcp:ff prio:10 small:ff mods:0
  configured task 0x00 (bmodfs):
    vm_offs:0 irq:3ffff lmcp:ffff allow_cli:0 mcp:ff prio:10 small:ff mods:5

Roottask: Loading 17 modules.
#05: loading "(cd)/boot/l4/l4env/events"
     from [0612e000-0616fe99] to [01540000-01549190][0154a000-0155f590]
     entry at 0005f374 via trampoline page code
     symbols at [0eb74000-0eb76000] (8kB), lines at [0eb6d000-0eb74000] (28kB)
#06: loading "(cd)/boot/l4/l4env/names --events"
     from [06170000-061b1c12] to [002d0000-002d6a37][002d7000-002e2000]
     entry at 0006037c via trampoline page code
     symbols at [0eb6b000-0eb6d000] (8kB), lines at [0eb65000-0eb6b000] (24kB)
#07: loading "(cd)/boot/l4/l4env/log"
     from [061b2000-061efd07] to [00400000-00406eca][00407000-00439808]
     entry at 00061370 via trampoline page code
     symbols at [0eb63000-0eb65000] (8kB), lines at [0eb5d000-0eb63000] (24kB)
#08: loading "(cd)/boot/l4/l4env/dm_phys --isa=0x00800000"
     from [061f0000-0628a8b4] to [01500000-01513cb7][01514000-0151e000]
     entry at 00062384 via trampoline page code
     symbols at [0eb58000-0eb5d000] (20kB), lines at [0eb4a000-0eb58000] (56kB)
#09: loading "(cd)/boot/l4/l4env/simple_ts -t 300"
     from [0628b000-062d8310] to [01400000-01408dea][01409000-014185e8]
     entry at 0006337c via trampoline page code
     symbols at [0eb48000-0eb4a000] (8kB), lines at [0eb40000-0eb48000] (32kB)
#0a: loading "(cd)/boot/l4/l4env/rtc"
     from [062d9000-06308a5c] to [01080000-010845c0][01085000-0108a000]
     entry at 00064370 via trampoline page code
     symbols at [0eb3e000-0eb40000] (8kB), lines at [0eb39000-0eb3e000] (20kB)
#0b: loading "(cd)/boot/l4/l4env/l4io"
     from [06309000-0654a391] to [00c20000-00c45315][00c46000-00cb4000]
     entry at 00066370 via trampoline page code
     symbols at [0eae3000-0eb39000] (344kB), lines at [0eac9000-0eae3000] (104kB)
#0c: loading "(cd)/boot/l4/l4env/l4dope"
     from [0654b000-066c2384] to [01b00000-01b45ef1][01b46000-01b8b000]
     entry at 00067374 via trampoline page code
     symbols at [0eabb000-0eac9000] (56kB), lines at [0ea8d000-0eabb000] (184kB)
#0d: loading "(cd)/boot/l4/usb/usbcore"
     from [066c3000-068faac1] to [008e0000-0092600d][00927000-0094c000]
     entry at 00068374 via trampoline page code
     symbols at [0ea81000-0ea8d000] (48kB), lines at [0ea4b000-0ea81000] (216kB)
#0e: loading "(cd)/boot/l4/usb/usbhid"
     from [068fb000-06aa0604] to [01900000-0193e269][0193f000-01966000]
     entry at 00069370 via trampoline page code
     symbols at [0ea42000-0ea4b000] (36kB), lines at [0ea17000-0ea42000] (172kB)
#0f: loading "(cd)/boot/l4/l4env/bmodfs"
     from [06aa1000-06b48f8d] to [01220000-01238689][01239000-01250000]
     passing module (cd)/boot/l4/cfg/l4linux26.cfg        [ 06b49000-06b49165 ]
     passing module (cd)/boot/l4/l4env/libloader.s.so     [ 06b4a000-06be8f11 ]
     passing module (cd)/boot/l4/l4env/libld-l4.s.so      [ 06be9000-06c62219 ]
     passing module (cd)/boot/l4/l4linux/vmlinuz          [ 06c63000-07019183 ]
     passing module (cd)/boot/l4/l4linux/drops.rd         [ 0701a000-0801a000 ]
     entry at 0006a46c via trampoline page code
     symbols at [0ea12000-0ea17000] (20kB), lines at [0e9ff000-0ea12000] (76kB)
#10: loading "(cd)/boot/l4/l4env/loader --fprov=BMODFS l4linux26.cfg"
     from [0801a000-080f8b6d] to [01300000-013291c9][0132a000-01349000]
     entry at 0006b390 via trampoline page code
     symbols at [0e9f8000-0e9ff000] (28kB), lines at [0e9de000-0e9f8000] (104kB)

ROOT: Sending ports 0070-0070 to task #0a
ROOT: Sending ports 0080-0080 to task #0a
ROOT: Sending ports 0071-0071 to task #0a
names   | Starting thread listening for `exit' events
rtc     | Date:29.04.2009 Time:07:33:01
simplets| Configured for 300 tasks.
loader  | Can't map tbuf status page
usbcore | main(): DDE USB CORE initiaizing:
usbcore | main(): Initializing DDE base system.
io      | Using platform configuration 'x86'
ROOT: Sending ports 0cfb-0cfb to task #0b
ROOT: Sending ports 0cf8-0cfb to task #0b
ROOT: Sending ports 0cfe-0cff to task #0b
io      | PCI: Using configuration type 1
io      | PCI: Probing PCI hardware
io      | PCI: Probing PCI hardware (bus 00)
ROOT: Sending ports 0cfc-0cff to task #0b
io      | PCI: PIIX3: Enabling Passive Release on 00:01.0
io      | Limiting direct PCI/PCI transfers.
io      | Activating ISA DMA hang workarounds.
io      | 00000000-ffffffff : PCI mem
io      |   f0000000-f1ffffff : Cirrus Logic GD 5446
io      |   f2000000-f2000fff : Cirrus Logic GD 5446
io      | 0000-ffff : PCI IO
io      |   0cf8-0cff : PCI conf1
io      |   b000-b03f : Intel Corporation 82371AB/EB/MB PIIX4 ACPI
io      |   b100-b11f : Intel Corporation 82371AB/EB/MB PIIX4 ACPI
io      |   c000-c00f : Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]
io      |   c020-c03f : Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II]
io      |   c100-c1ff : Realtek Semiconductor Co., Ltd. RTL-8029(AS)
bmodfs  | Passed the following modules:
bmodfs  |   module "(cd)/boot/l4/cfg/l4linux26.cfg" (1kB)
bmodfs  |   module "(cd)/boot/l4/l4env/libloader.s.so" (636kB)
bmodfs  |   module "(cd)/boot/l4/l4env/libld-l4.s.so" (485kB)
bmodfs  |   module "(cd)/boot/l4/l4linux/vmlinuz" (3801kB)
bmodfs  |   module "(cd)/boot/l4/l4linux/drops.rd" (16384kB)
loader  | sleeping for 1000 ms
io      | Available IRQs=[ <!0> 1 <!2> 3 <!4> 5 6 7 8 9 a b c d e f 10 11 ]
l4dope  | L4INPUT native mode activated
l4dope  | L4INPUT:                !!! W A R N I N G !!!
l4dope  | L4INPUT:  Please, do not use Fiasco's "-esc" with L4INPUT.
l4dope  | L4INPUT:                !!! W A R N I N G !!!
ROOT: Sending ports 0060-006f to task #0b
l4dope  | Failed to disable AUX port, but continuing anyway... Is this a SiS?
l4dope  | If AUX port is really absent please use the 'i8042.noaux' option.
l4dope  | serio: i8042 KBD port at 0x60,0x64 irq 1
l4dope  | input: AT Raw Set 2 keyboard on isa0060/serio0
l4dope  | input: PC Speaker
l4dope  | input: L4 input event injector
l4dope  | L4 input event injector: IRQ handler up
l4dope  | connect "AT Raw Set 2 keyboard", isa0060/serio0/input0
l4dope  | connect "PC Speaker", isa0061/input0
l4dope  | connect "L4 input event injector", l4/sys
l4dope  | SharedMem(alloc): hl.raw=100000, id=44, size=800
l4dope  | SharedMem(get_adr): address = 0x5000
l4dope  | SharedMem(alloc): hl.raw=100000, id=45, size=800
l4dope  | SharedMem(get_adr): address = 0x6000
l4dope  | SharedMem(alloc): hl.raw=100000, id=46, size=800
l4dope  | SharedMem(get_adr): address = 0x7000
l4dope  | SharedMem(alloc): hl.raw=100000, id=47, size=800
l4dope  | SharedMem(get_adr): address = 0xd000
l4dope  | SharedMem(alloc): hl.raw=100000, id=48, size=800
l4dope  | SharedMem(get_adr): address = 0xe000
l4dope  | SharedMem(alloc): hl.raw=100000, id=49, size=800
l4dope  | SharedMem(get_adr): address = 0xf000
l4dope  | SharedMem(alloc): hl.raw=100000, id=4b, size=800
l4dope  | SharedMem(get_adr): address = 0x16000
usbcore | main(): Initializing DDE kmalloc.
usbcore | main(): Initializing DDE process.
usbcore | main(): Initializing DDE timers.
usbhid  | l4dde_mm_init(): Using ...
usbhid  |   16 kB at 0x00002000 (vmem)
usbhid  |   128 kB in 1 regions (kmem)
l4dope  | SharedMem(alloc): hl.raw=100000, id=55, size=484
l4dope  | SharedMem(get_adr): address = 0x20000
l4dope  | dope: paddr=f0000000 size=4096KiB
l4dope  | Mapped video memory at f0000000 to 00400000+000000 [4096kB] via L4IO
l4dope  | mapping: vaddr=0x400000 size=4194304(0x400000) offset=0(0x0)
l4dope  | Frame buffer base:  0x400000
l4dope  | Resolution:         1024x768x16
l4dope  | Bytes per scanline: 2048
l4dope  | Current video mode is 1024x768 red=11:5 green=5:6 blue=0:5 res=0:0
usbcore | main(): Initializing DDE softirq.
usbcore | Softirq daemon starting
usbcore | main(): Doing initcalls...
usbcore | Initializing DDE page cache
usbcore | <6>usbcore: registered new interface driver hub
usbhid  | register_chrdev(): called input
usbhid  | register_chrdev(): called usb
usbhid  | usb: registered new driver hub
usbhid  | usb: $Revision: 238 $ time 17:10:21 Apr 11 2009
usbhid  | usb: High bandwidth mode enabled
io      | PCI: Setting latency timer of device 00:01.2 to 64
usbhid  | /home/user/Desktop/tudos/l4/pkg/usbhid/server/lib-linux/contrib/usb/h
usbhid  : ost/usb-uhci.c: USB UHCI at I/O 0xc020, IRQ 9
ROOT: Sending ports c030-c031 to task #0e
ROOT: Sending ports c032-c033 to task #0e
ROOT: Sending ports c034-c035 to task #0e
usbhid  | usb: Detected 2 ports
ROOT: Cannot send port c030 to task #0b, owner is #0e
io      | [B.2] l4io/server/src/res.c:414:l4_io_request_region_component():
io      |  sigma0 request for I/O ports [c020,c040) failed (err=0 dw1=0)
io      |

    --PANIC, 'g' for exit------------------------------------IP: 00c21185     
[io] (b.02) jdb: