Hi comunity I'm trying to test the hello application on the ODROID-X2(Exynos4412) board. I'm using the Fiasco.OC+L4re snapshot(l4re-snapshot-2014092821). I have configured and compiled Fiasco.OC with support to Samsung Exynos4412:
export SYSTEM_TARGET=arm-linux-gnueabihf- make BUILDDIR=build-foc make menuconfig make -j16
After that, I have compiled the entire L4re for armv7a (SamsungExynos4)
make B=build-l4re make O=build-l4re ARCH=arm SYSTEM_TARGET=arm-linux-gnueabihf- menuconfig make O=build-l4re ARCH=arm SYSTEM_TARGET=arm-linux-gnueabihf- -j16
To generate the raw image have modified the conf/Makeconf.boot to set the Fiasco.OC build path and executed:
make O=build-l4re ARCH=arm SYSTEM_TARGET=arm-linux-gnueabihf- rawimage E=hello
I have copied the generated image into the SD card and tried to boot from u-boot:
fatload mmc 0:1 0x41000000 hello.raw bootm 0x41000000
The system starts but stops execution. This is the serial output:
Partition1: Start Address(0xc00), Size(0x40400)
reading hello.raw
942080 bytes read
Boot with zImage
Starting kernel ...
Hello from Startup::stage2
Per_cpu_data_alloc: (orig: 0xf0063a50-0xf00644d0)
Number of IRQs available at this GIC: 160
FPU0: Arch: VFPv3(3), Part: VFPv3(30), r: 4, v: 9, i: 41, t: hard, p: dbl/sngl
KERNEL: Warning: No page-fault handler for 0xee202214, error 0x94000848, pc f0039420
Somebody have tested Fiasco.OC+L4re on ODROID-X2 or another Exynos 4412 platform? Best regards