Hi, 

here is the output on the console after calling the command as you mentioned:

akpolat@akpolatX240:~/Desktop$ qemu-system-x86_64 -cdrom lx_ginger.iso -boot d -m 512 -chardev stdio,id=seabios -device isa-debugcon,iobase=0x402,chardev=seabios -serial stdio


Start bios (version 1.7.4-20140219_122725-roseapple)
No Xen hypervisor found.
Running on QEMU (i440fx)
RamSize: 0x20000000 [cmos]
Relocating init from 0x000dfe99 to 0x1ffdf190 (size 69036)
Found QEMU fw_cfg
RamBlock: addr 0x0000000000000000 len 0x0000000020000000 [e820]
CPU Mhz=2763
=== PCI bus & bridge init ===
PCI: pci_bios_init_bus_rec bus = 0x0
=== PCI device probing ===
Found 6 PCI devices (max PCI bus is 00)
=== PCI new allocation pass #1 ===
PCI: check devices
=== PCI new allocation pass #2 ===
PCI: 32: 0000000080000000 - 00000000fec00000
PCI: map device bdf=00:03.0  bar 1, addr 0000c000, size 00000040 [io]
PCI: map device bdf=00:01.1  bar 4, addr 0000c040, size 00000010 [io]
PCI: map device bdf=00:03.0  bar 6, addr feb80000, size 00040000 [mem]
PCI: map device bdf=00:03.0  bar 0, addr febc0000, size 00020000 [mem]
PCI: map device bdf=00:02.0  bar 6, addr febe0000, size 00010000 [mem]
PCI: map device bdf=00:02.0  bar 1, addr febf0000, size 00001000 [mem]
PCI: map device bdf=00:02.0  bar 0, addr fc000000, size 02000000 [prefmem]
PCI: init bdf=00:00.0 id=8086:1237
PCI: init bdf=00:01.0 id=8086:7000
PIIX3/PIIX4 init: elcr=00 0c
PCI: init bdf=00:01.1 id=8086:7010
PCI: init bdf=00:01.3 id=8086:7113
Using pmtimer, ioport 0xb008
PCI: init bdf=00:02.0 id=1013:00b8
PCI: init bdf=00:03.0 id=8086:100e
PCI: Using 00:02.0 for primary VGA
Found 1 cpu(s) max supported 1 cpu(s)
MP table addr=0x000f0b70 MPC table addr=0x000f0b80 size=208
SMBIOS ptr=0x000f0b50 table=0x000f0a10 size=307
Scan for VGA option rom
Running option rom at c000:0003
Start SeaVGABIOS (version 1.7.4-20140219_122730-roseapple)
enter vga_post:
   a=00000010  b=0000ffff  c=00000000  d=0000ffff ds=0000 es=f000 ss=0000
  si=00000000 di=00006580 bp=00000000 sp=00006d1a cs=f000 ip=d256  f=0000
cirrus init
cirrus init 2
Attempting to allocate VGA stack via pmm call to f000:d2ce
pmm call arg1=0
VGA stack allocated at ed790
Turning on vga text mode console
set VGA mode 3
cirrus mode switch regular
SeaBIOS (version 1.7.4-20140219_122725-roseapple)
Found 1 lpt ports
Found 1 serial ports
Searching bootorder for: /pci@i0cf8/isa@1/fdc@03f0/floppy@0
ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
ATA controller 2 at 170/374/0 (irq 15 dev 9)
DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD]
Searching bootorder for: /pci@i0cf8/*@1,1/drive@1/disk@0
PS2 keyboard initialized
All threads complete.
Scan for option roms
Running option rom at c900:0003
pmm call arg1=1
pmm call arg1=0
pmm call arg1=1
pmm call arg1=0
Searching bootorder for: /pci@i0cf8/*@3
Searching bootorder for: /rom@genroms/kvmvapic.bin
Searching bootorder for: HALT
Running option rom at ca00:0003
Space available for UMB: cc800-ec800, f0000-f0930
Returned 57344 bytes of ZoneHigh
e820 map has 6 items:
  0: 0000000000000000 - 000000000009fc00 = 1 RAM
  1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
  3: 0000000000100000 - 000000001fffe000 = 1 RAM
  4: 000000001fffe000 - 0000000020000000 = 2 RESERVED
  5: 00000000fffc0000 - 0000000100000000 = 2 RESERVED
enter handle_19:
  NULL
Booting from DVD/CD...
Booting from 0000:7c00

Welcome to Fiasco.OC (ia32)!
L4/Fiasco.OC ia32 microkernel (C) 1998-2011 TU Dresden
Rev: r30 compiled with gcc 4.4.3 for Intel Pentium    [.up]
Build: #32 Tue Feb 15 10:07:33 CET 2011

Performance-critical config option(s) detected:
  CONFIG_NDEBUG is off
  CONFIG_NO_FRAME_PTR is off

Superpages: yes
Kmem:: cpu page at 1fff8000 (4096Bytes)
Enabling SVM support
NASID: 0x10
ACPI-Init
ACPI: RSDP = 0xf09e0   pRSDT = 1ffffbc1   pXSDT =                0
ACPI: OEM: BOCHS 
MADT = 0x203ffb11
IO-APIC[ 0]: struct: 0x203ffb45 adr=fec00000
IO-APIC[ 0]: pins 23
  PIN[ 0m]: vector=20, del=0, dm=physical, dest=0 (high, edge)
  PIN[ 1m]: vector=21, del=0, dm=physical, dest=0 (high, edge)
  PIN[ 2m]: vector=22, del=0, dm=physical, dest=0 (high, edge)
  PIN[ 3m]: vector=23, del=0, dm=physical, dest=0 (high, edge)
  PIN[ 4m]: vector=24, del=0, dm=physical, dest=0 (high, edge)
  PIN[ 5m]: vector=25, del=0, dm=physical, dest=0 (high, edge)
  PIN[ 6m]: vector=26, del=0, dm=physical, dest=0 (high, edge)
  PIN[ 7m]: vector=27, del=0, dm=physical, dest=0 (high, edge)
  PIN[ 8m]: vector=28, del=0, dm=physical, dest=0 (high, edge)
  PIN[ 9m]: vector=29, del=0, dm=physical, dest=0 (high, edge)
  PIN[10m]: vector=2a, del=0, dm=physical, dest=0 (high, edge)
  PIN[11m]: vector=2b, del=0, dm=physical, dest=0 (high, edge)
  PIN[12m]: vector=2c, del=0, dm=physical, dest=0 (high, edge)
  PIN[13m]: vector=2d, del=0, dm=physical, dest=0 (high, edge)
  PIN[14m]: vector=2e, del=0, dm=physical, dest=0 (high, edge)
  PIN[15m]: vector=2f, del=0, dm=physical, dest=0 (high, edge)
  PIN[16m]: vector=30, del=0, dm=physical, dest=0 (high, edge)
  PIN[17m]: vector=31, del=0, dm=physical, dest=0 (high, edge)
  PIN[18m]: vector=32, del=0, dm=physical, dest=0 (high, edge)
  PIN[19m]: vector=33, del=0, dm=physical, dest=0 (high, edge)
  PIN[20m]: vector=34, del=0, dm=physical, dest=0 (high, edge)
  PIN[21m]: vector=35, del=0, dm=physical, dest=0 (high, edge)
  PIN[22m]: vector=36, del=0, dm=physical, dest=0 (high, edge)
  PIN[23m]: vector=37, del=0, dm=physical, dest=0 (high, edge)
IO-APIC: dual 8259: yes
IO-APIC: ovr[ 0] 00 -> 2
IO-APIC: ovr[ 1] 05 -> 5
IO-APIC: ovr[ 2] 09 -> 9
IO-APIC: ovr[ 3] 0a -> a
IO-APIC: ovr[ 4] 0b -> b
Allocate cpu_mem @ 0xfeff6000
Local APIC[00]: version=11 max_lvt=5
APIC ESR value before/after enabling: 00000000/00000000
Using the Local APIC timer on vector 90 (Periodic Mode) for scheduling
SERIAL ESC: allocated IRQ 4 for serial uart
SERIAL ESC: allocated IRQ 4 for serial uart
Not using serial hack in slow timer handler.
Absolute KIP Syscalls using: Sysenter
CPU[0:0]: AuthenticAMD (6:6:3:0)[00000663] Model: Athlon (Palomino) at 2694 MHz

 255/512 Entry I TLB (4K pages)    255 Entry I TLB (4M pages)
 255/512 Entry D TLB (4K pages)    255 Entry D TLB (4M pages)
  64 KB L1 I Cache (2-way associative, 64 bytes per line)
  64 KB L1 D Cache (2-way associative, 64 bytes per line)
 512 KB L2 U Cache (8-way associative, 64 bytes per line)

Freeing init code/data: 28672 bytes (7 pages)

VMX: Not supported
Calibrating timer loop... done.
SIGMA0: Hello!
  KIP @ 400000
  Found Fiasco: KIP syscalls: yes
  allocated 4KB for maintenance structures
SIGMA0: Dump of all resource maps
RAM:------------------------
[0:1000;9efff]
[0:10c000;13ffff]
[4:140000;18ffff]
[0:190000;2dbfff]
[4:2dc000;2dcfff]
[0:2dd000;3fffff]
[0:469000;137dfff]
[4:137e000;7883fff]
[0:7884000;1d70ffff]
IOMEM:----------------------
[0:0;fff]
[0:9f000;fffff]
[0:1fffe000;febfffff]
[0:fec01000;fedfffff]
[0:fee01000;ffffffff]
IO PORTS--------------------------
[0:0;fffffff]
MOE: Hello world
MOE: found 377736 KByte free memory
MOE: found RAM from 1000 to 1d710000
MOE: allocated 471 KByte for the page array @0x1000
MOE: virtual user address space [0-bfffffff]
MOE: rom name space cap -> [C:501000]
  BOOTFS: [137e000-146d25c] [C:503000] l4re
  BOOTFS: [146e000-165555b] [C:504000] ned
  BOOTFS: [1656000-1ea917f] [C:505000] io
  BOOTFS: [1eaa000-1f82d39] [C:506000] rtc
  BOOTFS: [1f83000-22812f8] [C:507000] mag
  BOOTFS: [2282000-23d7cf5] [C:508000] fb-drv
  BOOTFS: [908a000-908a83b] [C:509000] lx_ginger.cfg
  BOOTFS: [9064000-90643b7] [C:50a000] x86-legacy.devs
  BOOTFS: [9080000-908086f] [C:50b000] x86_android.vbus
  BOOTFS: [23d8000-28179f3] [C:50c000] vmlinuz.android
  BOOTFS: [2818000-2912000] [C:50d000] root-x86-ginger.img
  BOOTFS: [2913000-7884000] [C:50e000] system-x86-ginger.img
MOE: cmdline: moe rom/lx_ginger.cfg
MOE: Starting: rom/ned rom/lx_ginger.cfg
MOE: loading 'rom/ned'
Ned says: Hi World!
Ned: loading file: 'rom/lx_ginger.cfg'
io      | Io service
io      | Hello from L4-ACPICA
io      | Find root Pointer
io      | AcpiOsMapMemory(40e, 2) = 40040e
io      | AcpiOsMapMemory(9fc00, 400) = 49fc00
io      | AcpiOsMapMemory(e0000, 20000) = 4e0000
io      | Find root Pointer: f09e0
io      | AcpiOsMapMemory(f09e0, 24) = 4f09e0
io      | ACPI: RSDP 0xf09e0 00014 (v00 BOCHS )
io      | AcpiOsMapMemory(1ffffbc1, 24) = bffbc1
io      | ACPI: RSDT 0x1ffffbc1 00034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
io      | AcpiOsMapMemory(1ffffbc1, 34) = bffbc1
io      | AcpiOsMapMemory(1ffff1c0, 24) = bff1c0
io      | ACPI: FACP 0x1ffff1c0 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
io      | AcpiOsMapMemory(1ffff1c0, 74) = bff1c0
io      | AcpiOsMapMemory(1fffe040, 24) = bfe040
io      | ACPI: DSDT 0x1fffe040 01180 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
io      | AcpiOsMapMemory(1fffe000, 24) = bfe000
io      | ACPI: FACS 0x1fffe000 00040
io      | AcpiOsMapMemory(1ffff234, 24) = bff234
io      | ACPI: SSDT 0x1ffff234 008DD (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
io      | AcpiOsMapMemory(1ffffb11, 24) = bffb11
io      | ACPI: APIC 0x1ffffb11 00078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
io      | AcpiOsMapMemory(1ffffb89, 24) = bffb89
io      | ACPI: HPET 0x1ffffb89 00038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
io      | AcpiOsMapMemory(1fffe040, 1180) = bfe040
io      | Parsing all Control Methods:
io      | Table [DSDT](id 0001) - 144 Objects with 18 Devices 52 Methods 8 Regions
io      | AcpiOsMapMemory(1ffff234, 8dd) = bff234
io      | Parsing all Control Methods:
io      | Table [SSDT](id 0002) - 155 Objects with 32 Devices 42 Methods 1 Regions
io      |  tbxface-0601 [02] TbLoadNamespace       : ACPI Tables successfully acquired
io      | enable ACPI subsystem
io      | evxfevnt-0184 [02] Enable                : Transition to ACPI mode successful
io      | AcpiOsMapMemory(1fffe000, 40) = bfe000
io      | evgpeblk-1129 [04] EvCreateGpeBlock      : GPE 00 to 0F [_GPE] 2 regs on int 0x9
io      | /home/mlange/projects/l4re/src/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:57:AcpiOsInstallInterruptHandler: UNINPLEMENTED
io      | initialize ACPI objects
io      | Completing Region/Field/Buffer/Package initialization:.....................................
io      | Initialized 9/9 Regions 2/2 Fields 21/21 Buffers 5/5 Packages (308 nodes)
io      | Initializing Device/Processor/Thermal objects by executing _INI methods:
io      | Executed 0 _INI methods requiring 1 _STA executions (examined 53 objects)
io      | evgpeblk-1234 [03] EvInitializeGpeBlock  : Found 0 Wake, Enabled 16 Runtime GPEs in this block
io      | Interpreter enabled
io      | scanning for PCI root bridge
io      | Found PCI root bridge...
io      | Using IOAPIC for interrupt routing
io      | ACPICA-Version:20091214, System in ACPI MODE, 32bit timer
io      | WARNING: phys mmio resource allocation failed
io      | IOMEM * [000000000a0000-000000000bffff 20000] non-pref (32bit) (align=1ffff flags=c002)
io      | WARNING: phys mmio resource allocation failed
io      | IOMEM * [000000000a0000-000000000bffff 20000] non-pref (32bit) (align=1ffff flags=c002)
io      | IGNORE ACPI RES: 1
io      | WARNING: phys mmio resource allocation failed
io      | IOMEM   [000000000c0000-000000000fffff 40000] non-pref (32bit) (align=3ffff flags=c002)
io      | WARNING: phys mmio resource allocation failed
io      | IOMEM   [000000000c0000-000000000fffff 40000] non-pref (32bit) (align=3ffff flags=c002)
io      | WARNING: phys mmio resource allocation failed
io      | IOMEM   [0000000009f000-0000000009ffff 1000] non-pref (32bit) (align=fff flags=c002)
io      | WARNING: phys mmio resource allocation failed
io      | IOMEM   [0000000009f000-0000000009ffff 1000] non-pref (32bit) (align=fff flags=c002)
io      | WARNING: phys mmio resource allocation failed
io      | IOMEM   [00000000000000-00000000000fff 1000] non-pref (32bit) (align=fff flags=c002)
io      | WARNING: phys mmio resource allocation failed
io      | IOMEM   [00000000000000-00000000000fff 1000] non-pref (32bit) (align=fff flags=c002)
io      | WARNING: phys mmio resource allocation failed
io      | IOMEM   [000000000a0000-000000000bffff 20000] non-pref (32bit) (align=1ffff flags=c002)
io      | WARNING: phys mmio resource allocation failed
io      | IOMEM   [000000000a0000-000000000bffff 20000] non-pref (32bit) (align=1ffff flags=c002)
io      | WARNING: device 'PS2' already assigned to an other virtual bus.
io      | WARNING: device 'S18_' already assigned to an other virtual bus.
io      | Service registration failed: 'froyo_bus'
io      | Ready. Waiting for request.
mag     | Hello from MAG
fb      | Trying execution of ``set VBE mode'' using x86emu
fb      | VBE BIOS not present.
fb      | Failed to setup Framebuffer
mag     | Error: Exception: Void capability invoked: requesting goos info: backtrace ...
mag     | 1002e2f
mag     | 103f4a5
mag     | 1000dcb
mag     | 10026de
mag     | 105390c
mag     | 10000e1
mag     | 
mag     | MAG: destroy FB svc
Ned[lua]: Hm, cpapbility 436000 does not support the meta protocol: -2004
Ned: ERROR: rom/lx_ginger.cfg:82: attempt to call method 'create' (a nil value)
rtc     | Date:23.07.2014 Time:15:08:55


====

Cheers,
Cem



Cem Akpolat


On Wed, Jul 23, 2014 at 4:49 PM, Matthias Lange <matthias.lange@kernkonzept.com> wrote:
On Tue, Jul 22, 2014 at 10:16:19AM +0200, cem akpolat wrote:
> Hi,
>
> I tested the image on another laptop older than mine, the only thing that I
> have seen is "hacked by SECT". The whole problem can rely on my laptop. I
> have to figure out it. But should I see also android gingerbread interface
> right after this hacked by SECT.

Ok, I understand. The system seems to stop booting in the framebuffer driver
(mag gets not started). This indicates that the framebuffer driver is stuck
emulating the 16bit VESA bios code. Newer versions of that bios try writing
debug information through an IO port. Can you try adding the following line to
the VGA device in your x86-legacy.devs

  Res.io(0x402, 0x402);

and see if it works? You can also append the following cmdline to qemu to see
the output

  -chardev stdio,id=seabios -device isa-debugcon,iobase=0x402,chardev=seabios

Matthias.

>
> Cheers,
> Cem
>
>
> Cem Akpolat
>
>
> On Tue, Jul 22, 2014 at 10:07 AM, cem akpolat <akpolatcem@gmail.com> wrote:
>
> > Hi,
> >
> > That was just an example for l4linux. I meant when I use l4linux instead
> > of l4android, I can see root file system, because it is added in the module
> > list. But here I reach up to this level, I can't even see the log of
> > l4android or root file system, it does nothing after arriving to that
> > point. You can also again see the log output below. By the way, Qemu
> > version is 2.0.0. Lua congfig file and module list are written  in the
> > previous mail.
> >
> > kpolat@akpolatX240:~/mysvn/l4android/l4android_x86/src/src/l4$ make qemu
> > E=l4_gingerbread O=build
> > '/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/vmlinuz.android'
> > is a zipped file, uncompressing to '/tmp/Ybip9Ajla7/vmlinuz.android'
> > Note: At least QEmu 0.13 is required for the loading to work.
> > qemu-system-i386 -kernel
> > /home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/bootstrap
> > -append "bootstrap  -modaddr 0x01100000" -initrd
> > "/home/akpolat/mysvn/l4android/l4android_x86/src/src/kernel/fiasco/build//fiasco
> > -serial_esc,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/sigma0
> > ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/moe
> > rom/lx_ginger.cfg,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/l4re
> > ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/ned
> > ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/io
> > ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/rtc
> > ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/mag
> > ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/fb-drv
> > ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/conf/android_conf/lx_ginger.cfg
> > ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/conf/android_conf/x86-legacy.devs
> > ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/conf/android_conf/x86_android.vbus
> > ,/tmp/Ybip9Ajla7/vmlinuz.android
> > ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/root-x86-ginger.img
> > ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/system-x86-ginger.img
> > " -serial stdio -m 3000
> >
> > L4 Bootstrapper
> >   Build: #1 Mo 21. Jul 18:54:56 CEST 2014, x86-32, 4.8.2
> >   RAM: 0000000000000000 - 000000000009fbff: 639kB
> >   RAM: 0000000000100000 - 00000000bb7fdfff: 3070968kB
> >   Total RAM: 2999MB
> >   Moving up to 15 modules behind 1100000
> >   moving module 00 { 2e5000-350c3f } -> { 7d51000-7dbcc3f } [441408]
> >   moving module 01 { 351000-3a4c48 } -> { 7dbd000-7e10c48 } [343113]
> >   moving module 02 { 3a5000-5e6a68 } -> { 7e11000-8052a68 } [2366057]
> >   moving module 03 { 5e7000-716a82 } -> { 6f36000-7065a82 } [1243779]
> >   moving module 04 { 717000-96517b } -> { 7066000-72b417b } [2417020]
> >   moving module 05 { 966000-147138f } -> { 8053000-8b5e38f } [11580304]
> >   moving module 06 { 1472000-15778b8 } -> { 1100000-12058b8 } [1071289]
> >   moving module 07 { 1578000-199efcd } -> { 1206000-162cfcd } [4353998]
> >   moving module 08 { 199f000-1b18ebd } -> { 162d000-17a6ebd } [1547966]
> >   moving module 09 { 1b19000-1b19839 } -> { 17a7000-17a7839 } [2106]
> >   moving module 10 { 1b1a000-1b1a4a3 } -> { 17a8000-17a84a3 } [1188]
> >   moving module 11 { 1b1b000-1b1b86e } -> { 17a9000-17a986e } [2159]
> >   moving module 12 { 1b1c000-1ecae46 } -> { 17aa000-1b58e46 } [3862087]
> >   moving module 13 { 1ecb000-1fc4fff } -> { 1b59000-1c52fff } [1024000]
> >   moving module 14 { 1fc5000-6f35fff } -> { 1c53000-6bc3fff } [83300352]
> >   moving module 03 { 6f36000-7065a82 } -> { 6bc4000-6cf3a82 } [1243779]
> >   moving module 04 { 7066000-72b417b } -> { 6cf4000-6f4217b } [2417020]
> >   moving module 05 { 8053000-8b5e38f } -> { 6f43000-7a4e38f } [11580304]
> >   Scanning
> > /home/akpolat/mysvn/l4android/l4android_x86/src/src/kernel/fiasco/build//fiasco
> > -serial_esc
> >   Scanning
> > /home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/sigma0
> >   Scanning
> > /home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/moe
> > rom/lx_ginger.cfg
> >   Bootloader MMAP:
> >     [        0,     9fc00) RAM (1)
> >     [    9fc00,     a0000) reserved (2)
> >     [    f0000,    100000) reserved (2)
> >     [   100000,  bb7fe000) RAM (1)
> >     [ bb7fe000,  bb800000) reserved (2)
> >     [ fffc0000, 100000000) reserved (2)
> >   Relocated mbi to [0x2dd000-0x2dd63f]
> >   Loading ndroid/l4android_x86/src/src/kernel/fiasco/build//fiasco
> >   Loading id/l4android_x86/src/src/l4/build/bin/x86_586/l4f/sigma0
> >   Loading droid/l4android_x86/src/src/l4/build/bin/x86_586/l4f/moe
> >   find kernel info page...
> >   found kernel info page at 0x400000
> > Regions of list 'regions'
> >     [        0,       fff] {     1000} Arch   BIOS
> >     [    9fc00,     9ffff] {      400} Arch   BIOS
> >     [    f0000,     fffff] {    10000} Arch   BIOS
> >     [   100000,    10b197] {     b198} Sigma0
> > id/l4android_x86/src/src/l4/build/bin/x86_586/l4f/sigma0
> >     [   140000,    18e21f] {    4e220} Root
> > droid/l4android_x86/src/src/l4/build/bin/x86_586/l4f/moe
> >     [   2d0000,    2e34a7] {    134a8} Boot   bootstrap
> >     [   2dd000,    2dd73c] {      73d} Root   Multiboot info
> >     [   300000,    38ffff] {    90000} Kern
> > ndroid/l4android_x86/src/src/kernel/fiasco/build//fiasco
> >     [   400000,    471fff] {    72000} Kern
> > ndroid/l4android_x86/src/src/kernel/fiasco/build//fiasco
> >     [  1100000,   7a4e38f] {  694e390} Root   Module
> >     [ bb7fe000,  bb7fffff] {     2000} Arch   BIOS
> >     [ fffc0000,  ffffffff] {    40000} Arch   BIOS
> >   API Version: (87) experimental
> >   Sigma0 config    ip:00100218 sp:002e1040
> >   Roottask config  ip:001401f6 sp:00000000
> >   Starting kernel ndroid/l4android_x86/src/src/kernel/fiasco/build//fiasco
> > at 003007b0
> >
> > Welcome to Fiasco.OC (ia32)!
> > L4/Fiasco.OC ia32 microkernel (C) 1998-2012 TU Dresden
> > Rev: UNKNOWN compiled with gcc 4.8.2 for Intel Pentium    []
> > Build: #1 Mo 21. Jul 18:56:08 CEST 2014
> >
> > Performance-critical config option(s) detected:
> >   CONFIG_NDEBUG is off
> >   CONFIG_NO_FRAME_PTR is off
> >
> > Superpages: yes
> > Kmem:: cpu page at bb3e2000 (4096Bytes)
> > ACPI-Init
> > ACPI: RSDP[0xf09e0] r00 OEM:BOCHS.
> > Boot_alloc: size=0x10
> > Boot_alloc: allocated extra memory block @0xfffe5000 (size=400)
> > Boot_alloc: @ 0xfffe5000
> > Boot_alloc: remaining free block @ 0xfffe5010 (size=3f0)
> > ACPI: RSDT[0x203ffbc1] r01 OEM:BOCHS. OEMTID:BXPCRSDT
> > ACPI: FACP[0x203ff1c0] r01 OEM:BOCHS. OEMTID:BXPCFACP
> > ACPI: SSDT[0x203ff234] r01 OEM:BOCHS. OEMTID:BXPCSSDT
> > ACPI: APIC[0x203ffb11] r01 OEM:BOCHS. OEMTID:BXPCAPIC
> > ACPI: HPET[0x203ffb89] r01 OEM:BOCHS. OEMTID:BXPCHPET
> > IO-APIC: MADT = 0x203ffb11
> > IO-APIC[ 0]: struct: 0x203ffb45 adr=fec00000
> > Boot_alloc: size=0x1c
> > Boot_alloc: @ 0xfffe5010
> > Boot_alloc: remaining free block @ 0xfffe5030 (size=3d0)
> > Boot_alloc: size=0x120
> > Boot_alloc: @ 0xfffe5030
> > Boot_alloc: remaining free block @ 0xfffe5150 (size=2b0)
> > IO-APIC[ 0]: pins 24
> >   PIN[ 0m]: vector=20, del=0, dm=physical, dest=0 (high, edge)
> >   PIN[ 1m]: vector=21, del=0, dm=physical, dest=0 (high, edge)
> >   PIN[ 2m]: vector=22, del=0, dm=physical, dest=0 (high, edge)
> >   PIN[ 3m]: vector=23, del=0, dm=physical, dest=0 (high, edge)
> >   PIN[ 4m]: vector=24, del=0, dm=physical, dest=0 (high, edge)
> >   PIN[ 5m]: vector=25, del=0, dm=physical, dest=0 (high, edge)
> >   PIN[ 6m]: vector=26, del=0, dm=physical, dest=0 (high, edge)
> >   PIN[ 7m]: vector=27, del=0, dm=physical, dest=0 (high, edge)
> >   PIN[ 8m]: vector=28, del=0, dm=physical, dest=0 (high, edge)
> >   PIN[ 9m]: vector=29, del=0, dm=physical, dest=0 (high, edge)
> >   PIN[10m]: vector=2a, del=0, dm=physical, dest=0 (high, edge)
> >   PIN[11m]: vector=2b, del=0, dm=physical, dest=0 (high, edge)
> >   PIN[12m]: vector=2c, del=0, dm=physical, dest=0 (high, edge)
> >   PIN[13m]: vector=2d, del=0, dm=physical, dest=0 (high, edge)
> >   PIN[14m]: vector=2e, del=0, dm=physical, dest=0 (high, edge)
> >   PIN[15m]: vector=2f, del=0, dm=physical, dest=0 (high, edge)
> >   PIN[16m]: vector=30, del=0, dm=physical, dest=0 (high, edge)
> >   PIN[17m]: vector=31, del=0, dm=physical, dest=0 (high, edge)
> >   PIN[18m]: vector=32, del=0, dm=physical, dest=0 (high, edge)
> >   PIN[19m]: vector=33, del=0, dm=physical, dest=0 (high, edge)
> >   PIN[20m]: vector=34, del=0, dm=physical, dest=0 (high, edge)
> >   PIN[21m]: vector=35, del=0, dm=physical, dest=0 (high, edge)
> >   PIN[22m]: vector=36, del=0, dm=physical, dest=0 (high, edge)
> >   PIN[23m]: vector=37, del=0, dm=physical, dest=0 (high, edge)
> > IO-APIC: dual 8259: yes
> > IO-APIC: ovr[ 0] 00 -> 2
> > IO-APIC: ovr[ 1] 05 -> 5
> > IO-APIC: ovr[ 2] 09 -> 9
> > IO-APIC: ovr[ 3] 0a -> a
> > IO-APIC: ovr[ 4] 0b -> b
> > Boot_alloc: size=0x4
> > Boot_alloc: @ 0xfffe5150
> > Boot_alloc: remaining free block @ 0xfffe5158 (size=2a8)
> > Allocate cpu_mem @ 0xfffe5400
> > FPU0: SSE
> > Local APIC[00]: version=11 max_lvt=5
> > APIC ESR value before/after enabling: 00000000/00000000
> > Using the Local APIC timer on vector 90 (Periodic Mode) for scheduling
> > SERIAL ESC: allocated IRQ 4 for serial uart
> > Absolute KIP Syscalls using: Sysenter
> > Boot_alloc: size=0x14
> > Boot_alloc: @ 0xfffe5158
> > Boot_alloc: remaining free block @ 0xfffe5170 (size=290)
> > Boot_alloc: size=0x300
> > Boot_alloc: allocated extra memory block @0xfffe5800 (size=400)
> > Boot_alloc: @ 0xfffe5800
> > Boot_alloc: remaining free block @ 0xfffe5b00 (size=100)
> > Enable MSI support: chained IRQ mgr @ 0xfffe5150
> > SERIAL ESC: allocated IRQ 4 for serial uart
> > Not using serial hack in slow timer handler.
> > CPU[0]: GenuineIntel (6:6:3:0)[00000663] Model: QEMU Virtual CPU version
> > 2.0.0 at 2694MHz
> >
> >   32 KB L1 I Cache (8-way associative, 64 bytes per line)
> >   32 KB L1 D Cache (8-way associative, 64 bytes per line)
> > 2048 KB L2 U Cache (8-way associative, 64 bytes per line)
> >
> > Freeing init code/data: 28672 bytes (7 pages)
> >
> > Calibrating timer loop... done.
> > SIGMA0: Hello!
> >   KIP @ 400000
> >   Found Fiasco: KIP syscalls: yes
> >   allocated 4KB for maintenance structures
> > SIGMA0: Dump of all resource maps
> > RAM:------------------------
> > [0:1000;9efff]
> > [0:10c000;13ffff]
> > [4:140000;18efff]
> > [0:18f000;2dcfff]
> > [4:2dd000;2ddfff]
> > [0:2de000;3fffff]
> > [0:46b000;10fffff]
> > [4:1100000;7a4efff]
> > [0:7a4f000;b77fffff]
> > [0:bb400000;bb7fdfff]
> > IOMEM:----------------------
> > [0:0;fff]
> > [0:9f000;fffff]
> > [0:bb7fe000;febfffff]
> > [0:fec01000;fedfffff]
> > [0:fee01000;ffffffff]
> > IO PORTS--------------------------
> > [0:0;fffffff]
> > MOE: Hello world
> > MOE: found 2901528 KByte free memory
> > MOE: found RAM from 1000 to bb7fe000
> > MOE: allocated 2999 KByte for the page array @0x46b000
> > MOE: virtual user address space [0-bfffffff]
> > MOE: rom name space cap -> [C:501000]
> >   BOOTFS: [6bc4000-6cf3a83] [C:503000] l4re
> >   BOOTFS: [6cf4000-6f4217c] [C:504000] ned
> >   BOOTFS: [6f43000-7a4e390] [C:505000] io
> >   BOOTFS: [1100000-12058b9] [C:506000] rtc
> >   BOOTFS: [1206000-162cfce] [C:507000] mag
> >   BOOTFS: [162d000-17a6ebe] [C:508000] fb-drv
> >   BOOTFS: [17a7000-17a783a] [C:509000] lx_ginger.cfg
> >   BOOTFS: [17a8000-17a84a4] [C:50a000] x86-legacy.devs
> >   BOOTFS: [17a9000-17a986f] [C:50b000] x86_android.vbus
> >   BOOTFS: [17aa000-1b58e47] [C:50c000] vmlinuz.android
> >   BOOTFS: [1b59000-1c53000] [C:50d000] root-x86-ginger.img
> >   BOOTFS: [1c53000-6bc4000] [C:50e000] system-x86-ginger.img
> > MOE: cmdline:
> > /home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/moe
> > rom/lx_ginger.cfg
> > MOE: Starting: rom/ned rom/lx_ginger.cfg
> > MOE: loading 'rom/ned'
> > Ned says: Hi World!
> > Ned: loading file: 'rom/lx_ginger.cfg'
> > io      | Dev_factory: register factory for N2Hw6DeviceE
> > io      | GTF: register factory for 7Pci_dev
> > io      | GTF: register factory for N2Hw12Msi_resourceE
> > io      | Dev_factory: register factory for N2Hw11Gpio_deviceE
> > io      | Io service
> > io      | Find root Pointer
> > io      | Find root Pointer: f09e0
> > io      | ACPI: RSDP 0xf09e0 00014 (v00 BOCHS )
> > io      | ACPI: RSDT 0xbb7ffbc1 00034 (v01 BOCHS  BXPCRSDT 00000001 BXPC
> > 00000001)
> > io      |
> > /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbff1c0,
> > 0x80007d08, 0x80007d0c): UNINPLEMENTED
> > io      | ACPI: FACP 0xbb7ff1c0 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC
> > 00000001)
> > io      |
> > /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbfe040,
> > 0x80007ce8, 0x80007cec): UNINPLEMENTED
> > io      | ACPI: DSDT 0xbb7fe040 01180 (v01 BOCHS  BXPCDSDT 00000001 BXPC
> > 00000001)
> > io      |
> > /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbfe000,
> > 0x80007ce8, 0x80007cec): UNINPLEMENTED
> > io      | ACPI: FACS 0xbb7fe000 00040
> > io      |
> > /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbff234,
> > 0x80007d08, 0x80007d0c): UNINPLEMENTED
> > io      | ACPI: SSDT 0xbb7ff234 008DD (v01 BOCHS  BXPCSSDT 00000001 BXPC
> > 00000001)
> > io      |
> > /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbffb11,
> > 0x80007d08, 0x80007d0c): UNINPLEMENTED
> > io      | ACPI: APIC 0xbb7ffb11 00078 (v01 BOCHS  BXPCAPIC 00000001 BXPC
> > 00000001)
> > io      |
> > /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbffb89,
> > 0x80007d08, 0x80007d0c): UNINPLEMENTED
> > io      | ACPI: HPET 0xbb7ffb89 00038 (v01 BOCHS  BXPCHPET 00000001 BXPC
> > 00000001)
> > io      | Parsing all Control Methods:
> > io      | Table [DSDT](id 0001) - 144 Objects with 18 Devices 52 Methods 8
> > Regions
> > io      | Parsing all Control Methods:
> > io      | Table [SSDT](id 0002) - 155 Objects with 32 Devices 42 Methods 1
> > Regions
> > io      | tbxfload-0274 [02] TbLoadNamespace       : ACPI Tables
> > successfully acquired
> > io      | evxfevnt-0175 [02] Enable                : Transition to ACPI
> > mode successful
> > io      | evgpeblk-0523 [04] EvCreateGpeBlock      : GPE 00 to 0F [_GPE] 2
> > regs on int 0x9
> > io      |
> > /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:60:AcpiOsInstallInterruptHandler(9,
> > 0x107d6c0, 0x3aa8): UNINPLEMENTED
> > io      | Completing Region/Field/Buffer/Package
> > initialization:.....................................
> > io      | Initialized 9/9 Regions 2/2 Fields 21/21 Buffers 5/5 Packages
> > (308 nodes)
> > io      | Initializing Device/Processor/Thermal objects by executing _INI
> > methods:
> > io      | Executed 0 _INI methods requiring 1 _STA executions (examined 53
> > objects)
> > io      | ACPICA-Version:20121018, System in ACPI MODE, 32bit timer
> > io      | <0xb120>IRQ     [00000000000000-00000000000000 1] rising edge
> > (32bit) (align=0 flags=44201)
> > io      | <0x16b38>IRQ     [00000000000000-00000000000000 1] rising edge
> > (32bit) (align=0 flags=44201)
> > io      | Ready. Waiting for request.
> > mag     | Hello from MAG
> > fb      | Trying execution of ``set VBE mode'' using x86emu
> > fb      | Found VESA BIOS version 3.0
> > fb      | OEM SeaBIOS VBE(C) 2
> >
> >
> >
> > =
> >
> > Sincerly,
> > Cem
> >
> > Cem Akpolat
> >
> >
> > On Tue, Jul 22, 2014 at 9:54 AM, Matthias Lange <
> > matthias.lange@kernkonzept.com> wrote:
> >
> >> Hi,
> >>
> >> On Mon, Jul 21, 2014 at 09:38:58PM +0200, cem akpolat wrote:
> >> > Hi,
> >> >
> >> > I believe I should see at least an android gingerbread os in the qemu,
> >> root
> >> > file system console like in l4linux. I cannot the whole components that
> >> I
> >> > included in module.list are being loaded. Here is the module list:
> >>
> >> I cannot see any L4Linux log messages (like the ones in your other email)
> >> in
> >> your pasted log. Can you provide those, so that I can analyze the problem?
> >>
> >> Matthias.
> >>
> >> > ======
> >> > modaddr 0x01100000
> >> >
> >> > default-kernel fiasco -serial_esc
> >> > default-bootstrap bootstrap
> >> >
> >> > entry l4_gingerbread
> >> > roottask moe rom/lx_ginger.cfg
> >> > kernel fiasco -serial_esc
> >> > module l4re
> >> > module ned
> >> > module io
> >> > module rtc
> >> > module mag
> >> > module fb-drv
> >> > module lx_ginger.cfg
> >> > module x86-legacy.devs
> >> > module x86_android.vbus
> >> > module vmlinuz.android
> >> > module root-x86-ginger.img
> >> > module system-x86-ginger.img
> >> > ======
> >> > Normally, root-x86-ginger and system-x86 should be loaded, but I cannot
> >> see
> >> > them. And the lua configuration file is below, this is the same
> >> > configuration file which is used in lx_ginger.iso (from l4android.org).
> >> > ======
> >> > require("L4");
> >> >
> >> > local lxname = "vmlinuz.android";
> >> > local l = L4.default_loader;
> >> >
> >> > local io_caps = {
> >> >   sigma0 = L4.cast(L4.Proto.Factory,
> >> L4.Env.sigma0):create(L4.Proto.Sigma0);
> >> >   rtc = l:new_channel():svr();
> >> >   con_bus = L4.default_loader:new_channel():svr();
> >> >   ginger_bus = L4.default_loader:new_channel():svr();
> >> >   fb = L4.default_loader:new_channel():svr();
> >> >   rom = L4.Env.rom;
> >> >   icu = L4.Env.icu;
> >> > };
> >> >
> >> > local rtc_caps = {
> >> >   vbus = io_caps.rtc;
> >> >   rtc = l:new_channel():svr();
> >> >   rom = L4.Env.rom;
> >> >   sigma0 = L4.Env.sigma0;
> >> > };
> >> >
> >> > local fb_caps = {
> >> >     vbus = io_caps.fb;
> >> >     rom = L4.Env.rom;
> >> >     fb = L4.default_loader:new_channel():svr();
> >> > };
> >> >
> >> > local con_caps = {
> >> >   fb = fb_caps.fb;
> >> > --  fb = L4.Env.vesa;
> >> >   vbus = io_caps.con_bus;
> >> >   con = L4.default_loader:new_channel():svr();
> >> >   rom = L4.Env.rom;
> >> > };
> >> >
> >> > L4.default_loader:startv(
> >> >   {
> >> >     caps = io_caps,
> >> >     log = { "io", "red" },
> >> >   },
> >> >   "rom/io", "rom/x86-legacy.devs", "rom/x86_android.vbus");
> >> >
> >> > L4.default_loader:startv(
> >> >   {
> >> >     caps = rtc_caps,
> >> >     log = { "rtc", "blue" },
> >> >   },
> >> >   "rom/rtc");
> >> >
> >> > L4.default_loader:startv(
> >> >         {
> >> >         caps = fb_caps,
> >> >         log =  { "fb", "cyan" },
> >> >         },
> >> >         "rom/fb-drv", "-m 0x117");
> >> >
> >> > local mag_caps = {
> >> > mag = l:new_channel(),
> >> > svc = l:new_channel(),
> >> > };
> >> >
> >> > l:start({
> >> >           caps = {
> >> >     vbus = io_caps.con_bus,
> >> >     fb   = fb_caps.fb,
> >> > -- fb   = L4.Env.vesa,
> >> >     mag  = mag_caps.mag:svr(),
> >> >     svc  = mag_caps.svc:svr(),
> >> >   },
> >> >           log      = { "mag", "g" },
> >> >   l4re_dbg = L4.Dbg.Warn,
> >> >         },
> >> > "rom/mag");
> >> >
> >> > local android_caps = {
> >> >   log = L4.Env.log:m("rws");
> >> >   vbus = io_caps.ginger_bus;
> >> >   rtc = rtc_caps.rtc;
> >> >   rom = L4.Env.rom;
> >> > --  fb = con_caps.con:create(L4.Proto.Goos);
> >> >   fb = mag_caps.svc:create(L4.Proto.Goos, "g=640x480,10,10");
> >> > };
> >> >
> >> > L4.default_loader:start(
> >> >   {
> >> >     caps = android_caps,
> >> >     l4re_dbg = L4.Dbg.Warn,
> >> >     log = { "android", "yellow" },
> >> >   },
> >> >   "rom/" .. lxname .. " console=ttyLv0 mem=256M
> >> > l4bdds.add=rom/system-x86-ginger.img,rw l4fb.touchscreen=1
> >> > androidboot.console=ttyLv0 boot=local ip=dhcp
> >> > l4x_rd=rom/root-x86-ginger.img rw root=1:0 ramdisk_size=1500 init=/init
> >> > --debug");
> >> >
> >> > ======
> >> >
> >> > Why aren't the other components being loaded?
> >> >
> >> > Br,
> >> > Cem
> >> >
> >> > Cem Akpolat
> >> >
> >> >
> >> > On Mon, Jul 21, 2014 at 8:38 PM, Matthias Lange <
> >> > matthias.lange@kernkonzept.com> wrote:
> >> >
> >> > > Hi,
> >> > >
> >> > > what is the actual problem you encounter? I cannot spot any problem
> >> from
> >> > > the (incomplete?) log.
> >> > >
> >> > > Matthias.
> >> > >
> >> > > On 21.07.2014, at 17:11, cem akpolat <akpolatcem@gmail.com> wrote:
> >> > >
> >> > > Dear all,
> >> > >
> >> > >
> >> > > I compiled l4android in the light of the explanation under
> >> l4android.org,
> >> > > however, I encountered the failure or another state that I don't know
> >> what
> >> > > it exactly means. It doesn't seem as an error, however, it stays
> >> here. By
> >> > > the way, the build.pl file provided in l4android.org doesn't work,
> >> > > therefore I have compiled everything manually.
> >> > >
> >> > > n/x86_586/l4f/system-x86-ginger.img " -serial stdio -m 3000
> >> > >
> >> > > L4 Bootstrapper
> >> > >   Build: #1 Mo 21. Jul 16:33:27 CEST 2014, x86-32, 4.8.2
> >> > >   RAM: 0000000000000000 - 000000000009fbff: 639kB
> >> > >   RAM: 0000000000100000 - 00000000bb7fdfff: 3070968kB
> >> > >   Total RAM: 2999MB
> >> > >   Moving up to 15 modules behind 1100000
> >> > >   moving module 00 { 2e5000-350c3f } -> { 845a000-84c5c3f } [441408]
> >> > >   moving module 01 { 351000-3a4c48 } -> { 84c6000-8519c48 } [343113]
> >> > >   moving module 02 { 3a5000-5e6a68 } -> { 851a000-875ba68 } [2366057]
> >> > >   moving module 03 { 5e7000-716a82 } -> { 763f000-776ea82 } [1243779]
> >> > >   moving module 04 { 717000-96517b } -> { 776f000-79bd17b } [2417020]
> >> > >   moving module 05 { 966000-147138f } -> { 875c000-926738f }
> >> [11580304]
> >> > >   moving module 06 { 1472000-15778b8 } -> { 1100000-12058b8 }
> >> [1071289]
> >> > >   moving module 07 { 1578000-199efcd } -> { 1206000-162cfcd }
> >> [4353998]
> >> > >   moving module 08 { 199f000-1b18ebd } -> { 162d000-17a6ebd }
> >> [1547966]
> >> > >   moving module 09 { 1b19000-1b19839 } -> { 17a7000-17a7839 } [2106]
> >> > >   moving module 10 { 1b1a000-1b1a36b } -> { 17a8000-17a836b } [876]
> >> > >   moving module 11 { 1b1b000-1b1b86e } -> { 17a9000-17a986e } [2159]
> >> > >   moving module 12 { 1b1c000-1ecae4e } -> { 17aa000-1b58e4e }
> >> [3862095]
> >> > >   moving module 13 { 1ecb000-1fcafff } -> { 1b59000-1c58fff }
> >> [1048576]
> >> > >   moving module 14 { 1fcb000-763efff } -> { 1c59000-72ccfff }
> >> [90652672]
> >> > >   moving module 03 { 763f000-776ea82 } -> { 72cd000-73fca82 }
> >> [1243779]
> >> > >   moving module 04 { 776f000-79bd17b } -> { 73fd000-764b17b }
> >> [2417020]
> >> > >   moving module 05 { 875c000-926738f } -> { 764c000-815738f }
> >> [11580304]
> >> > >   Scanning
> >> > >
> >> /home/akpolat/mysvn/l4android/l4android/src/src/kernel/fiasco/build//fiasco
> >> > > -serial_esc
> >> > >   Scanning
> >> > >
> >> /home/akpolat/mysvn/l4android/l4android/src/src/l4/build/bin/x86_586/l4f/sigma0
> >> > >   Scanning
> >> > >
> >> /home/akpolat/mysvn/l4android/l4android/src/src/l4/build/bin/x86_586/l4f/moe
> >> > > rom/lx_ginger.cfg
> >> > >   Bootloader MMAP:
> >> > >     [        0,     9fc00) RAM (1)
> >> > >     [    9fc00,     a0000) reserved (2)
> >> > >     [    f0000,    100000) reserved (2)
> >> > >     [   100000,  bb7fe000) RAM (1)
> >> > >     [ bb7fe000,  bb800000) reserved (2)
> >> > >     [ fffc0000, 100000000) reserved (2)
> >> > >   Relocated mbi to [0x2dd000-0x2dd606]
> >> > >   Loading /l4android/l4android/src/src/kernel/fiasco/build//fiasco
> >> > >   Loading ndroid/l4android/src/src/l4/build/bin/x86_586/l4f/sigma0
> >> > >   Loading l4android/l4android/src/src/l4/build/bin/x86_586/l4f/moe
> >> > >   find kernel info page...
> >> > >   found kernel info page at 0x400000
> >> > > Regions of list 'regions'
> >> > >     [        0,       fff] {     1000} Arch   BIOS
> >> > >     [    9fc00,     9ffff] {      400} Arch   BIOS
> >> > >     [    f0000,     fffff] {    10000} Arch   BIOS
> >> > >     [   100000,    10b197] {     b198} Sigma0
> >> > > ndroid/l4android/src/src/l4/build/bin/x86_586/l4f/sigma0
> >> > >     [   140000,    18e21f] {    4e220} Root
> >> > > l4android/l4android/src/src/l4/build/bin/x86_586/l4f/moe
> >> > >     [   2d0000,    2e34a7] {    134a8} Boot   bootstrap
> >> > >     [   2dd000,    2dd703] {      704} Root   Multiboot info
> >> > >     [   300000,    38ffff] {    90000} Kern
> >> > > /l4android/l4android/src/src/kernel/fiasco/build//fiasco
> >> > >     [   400000,    471fff] {    72000} Kern
> >> > > /l4android/l4android/src/src/kernel/fiasco/build//fiasco
> >> > >     [  1100000,   815738f] {  7057390} Root   Module
> >> > >     [ bb7fe000,  bb7fffff] {     2000} Arch   BIOS
> >> > >     [ fffc0000,  ffffffff] {    40000} Arch   BIOS
> >> > >   API Version: (87) experimental
> >> > >   Sigma0 config    ip:00100218 sp:002e1040
> >> > >   Roottask config  ip:001401f6 sp:00000000
> >> > >   Starting kernel
> >> /l4android/l4android/src/src/kernel/fiasco/build//fiasco
> >> > > at 003007b0
> >> > >
> >> > > Welcome to Fiasco.OC (ia32)!
> >> > > L4/Fiasco.OC ia32 microkernel (C) 1998-2012 TU Dresden
> >> > > Rev: UNKNOWN compiled with gcc 4.8.2 for Intel Pentium    []
> >> > > Build: #1 Mo 21. Jul 16:36:47 CEST 2014
> >> > >
> >> > > Performance-critical config option(s) detected:
> >> > >   CONFIG_NDEBUG is off
> >> > >   CONFIG_NO_FRAME_PTR is off
> >> > >
> >> > > Superpages: yes
> >> > > Kmem:: cpu page at bb3e2000 (4096Bytes)
> >> > > ACPI-Init
> >> > > ACPI: RSDP[0xf09e0] r00 OEM:BOCHS.
> >> > > Boot_alloc: size=0x10
> >> > > Boot_alloc: allocated extra memory block @0xfffe5000 (size=400)
> >> > > Boot_alloc: @ 0xfffe5000
> >> > > Boot_alloc: remaining free block @ 0xfffe5010 (size=3f0)
> >> > > ACPI: RSDT[0x203ffbc1] r01 OEM:BOCHS. OEMTID:BXPCRSDT
> >> > > ACPI: FACP[0x203ff1c0] r01 OEM:BOCHS. OEMTID:BXPCFACP
> >> > > ACPI: SSDT[0x203ff234] r01 OEM:BOCHS. OEMTID:BXPCSSDT
> >> > > ACPI: APIC[0x203ffb11] r01 OEM:BOCHS. OEMTID:BXPCAPIC
> >> > > ACPI: HPET[0x203ffb89] r01 OEM:BOCHS. OEMTID:BXPCHPET
> >> > > IO-APIC: MADT = 0x203ffb11
> >> > > IO-APIC[ 0]: struct: 0x203ffb45 adr=fec00000
> >> > > Boot_alloc: size=0x1c
> >> > > Boot_alloc: @ 0xfffe5010
> >> > > Boot_alloc: remaining free block @ 0xfffe5030 (size=3d0)
> >> > > Boot_alloc: size=0x120
> >> > > Boot_alloc: @ 0xfffe5030
> >> > > Boot_alloc: remaining free block @ 0xfffe5150 (size=2b0)
> >> > > IO-APIC[ 0]: pins 24
> >> > >   PIN[ 0m]: vector=20, del=0, dm=physical, dest=0 (high, edge)
> >> > >   PIN[ 1m]: vector=21, del=0, dm=physical, dest=0 (high, edge)
> >> > >   PIN[ 2m]: vector=22, del=0, dm=physical, dest=0 (high, edge)
> >> > >   PIN[ 3m]: vector=23, del=0, dm=physical, dest=0 (high, edge)
> >> > >   PIN[ 4m]: vector=24, del=0, dm=physical, dest=0 (high, edge)
> >> > >   PIN[ 5m]: vector=25, del=0, dm=physical, dest=0 (high, edge)
> >> > >   PIN[ 6m]: vector=26, del=0, dm=physical, dest=0 (high, edge)
> >> > >   PIN[ 7m]: vector=27, del=0, dm=physical, dest=0 (high, edge)
> >> > >   PIN[ 8m]: vector=28, del=0, dm=physical, dest=0 (high, edge)
> >> > >   PIN[ 9m]: vector=29, del=0, dm=physical, dest=0 (high, edge)
> >> > >   PIN[10m]: vector=2a, del=0, dm=physical, dest=0 (high, edge)
> >> > >   PIN[11m]: vector=2b, del=0, dm=physical, dest=0 (high, edge)
> >> > >   PIN[12m]: vector=2c, del=0, dm=physical, dest=0 (high, edge)
> >> > >   PIN[13m]: vector=2d, del=0, dm=physical, dest=0 (high, edge)
> >> > >   PIN[14m]: vector=2e, del=0, dm=physical, dest=0 (high, edge)
> >> > >   PIN[15m]: vector=2f, del=0, dm=physical, dest=0 (high, edge)
> >> > >   PIN[16m]: vector=30, del=0, dm=physical, dest=0 (high, edge)
> >> > >   PIN[17m]: vector=31, del=0, dm=physical, dest=0 (high, edge)
> >> > >   PIN[18m]: vector=32, del=0, dm=physical, dest=0 (high, edge)
> >> > >   PIN[19m]: vector=33, del=0, dm=physical, dest=0 (high, edge)
> >> > >   PIN[20m]: vector=34, del=0, dm=physical, dest=0 (high, edge)
> >> > >   PIN[21m]: vector=35, del=0, dm=physical, dest=0 (high, edge)
> >> > >   PIN[22m]: vector=36, del=0, dm=physical, dest=0 (high, edge)
> >> > >   PIN[23m]: vector=37, del=0, dm=physical, dest=0 (high, edge)
> >> > > IO-APIC: dual 8259: yes
> >> > > IO-APIC: ovr[ 0] 00 -> 2
> >> > > IO-APIC: ovr[ 1] 05 -> 5
> >> > > IO-APIC: ovr[ 2] 09 -> 9
> >> > > IO-APIC: ovr[ 3] 0a -> a
> >> > > IO-APIC: ovr[ 4] 0b -> b
> >> > > Boot_alloc: size=0x4
> >> > > Boot_alloc: @ 0xfffe5150
> >> > > Boot_alloc: remaining free block @ 0xfffe5158 (size=2a8)
> >> > > Allocate cpu_mem @ 0xfffe5400
> >> > > FPU0: SSE
> >> > > Local APIC[00]: version=11 max_lvt=5
> >> > > APIC ESR value before/after enabling: 00000000/00000000
> >> > > Using the Local APIC timer on vector 90 (Periodic Mode) for scheduling
> >> > > SERIAL ESC: allocated IRQ 4 for serial uart
> >> > > Absolute KIP Syscalls using: Sysenter
> >> > > Boot_alloc: size=0x14
> >> > > Boot_alloc: @ 0xfffe5158
> >> > > Boot_alloc: remaining free block @ 0xfffe5170 (size=290)
> >> > > Boot_alloc: size=0x300
> >> > > Boot_alloc: allocated extra memory block @0xfffe5800 (size=400)
> >> > > Boot_alloc: @ 0xfffe5800
> >> > > Boot_alloc: remaining free block @ 0xfffe5b00 (size=100)
> >> > > Enable MSI support: chained IRQ mgr @ 0xfffe5150
> >> > > SERIAL ESC: allocated IRQ 4 for serial uart
> >> > > Not using serial hack in slow timer handler.
> >> > > CPU[0]: GenuineIntel (6:6:3:0)[00000663] Model: QEMU Virtual CPU
> >> version
> >> > > 2.0.0 at 2694MHz
> >> > >
> >> > >   32 KB L1 I Cache (8-way associative, 64 bytes per line)
> >> > >   32 KB L1 D Cache (8-way associative, 64 bytes per line)
> >> > > 2048 KB L2 U Cache (8-way associative, 64 bytes per line)
> >> > >
> >> > > Freeing init code/data: 28672 bytes (7 pages)
> >> > >
> >> > > Calibrating timer loop... done.
> >> > > SIGMA0: Hello!
> >> > >   KIP @ 400000
> >> > >   Found Fiasco: KIP syscalls: yes
> >> > >   allocated 4KB for maintenance structures
> >> > > SIGMA0: Dump of all resource maps
> >> > > RAM:------------------------
> >> > > [0:1000;9efff]
> >> > > [0:10c000;13ffff]
> >> > > [4:140000;18efff]
> >> > > [0:18f000;2dcfff]
> >> > > [4:2dd000;2ddfff]
> >> > > [0:2de000;3fffff]
> >> > > [0:46b000;10fffff]
> >> > > [4:1100000;8157fff]
> >> > > [0:8158000;b77fffff]
> >> > > [0:bb400000;bb7fdfff]
> >> > > IOMEM:----------------------
> >> > > [0:0;fff]
> >> > > [0:9f000;fffff]
> >> > > [0:bb7fe000;febfffff]
> >> > > [0:fec01000;fedfffff]
> >> > > [0:fee01000;ffffffff]
> >> > > IO PORTS--------------------------
> >> > > [0:0;fffffff]
> >> > > MOE: Hello world
> >> > > MOE: found 2894324 KByte free memory
> >> > > MOE: found RAM from 1000 to bb7fe000
> >> > > MOE: allocated 2999 KByte for the page array @0x46b000
> >> > > MOE: virtual user address space [0-bfffffff]
> >> > > MOE: rom name space cap -> [C:501000]
> >> > >   BOOTFS: [72cd000-73fca83] [C:503000] l4re
> >> > >   BOOTFS: [73fd000-764b17c] [C:504000] ned
> >> > >   BOOTFS: [764c000-8157390] [C:505000] io
> >> > >   BOOTFS: [1100000-12058b9] [C:506000] rtc
> >> > >   BOOTFS: [1206000-162cfce] [C:507000] mag
> >> > >   BOOTFS: [162d000-17a6ebe] [C:508000] fb-drv
> >> > >   BOOTFS: [17a7000-17a783a] [C:509000] lx_ginger.cfg
> >> > >   BOOTFS: [17a8000-17a836c] [C:50a000] x86-legacy.devs
> >> > >   BOOTFS: [17a9000-17a986f] [C:50b000] x86_android.vbus
> >> > >   BOOTFS: [17aa000-1b58e4f] [C:50c000] vmlinuz.android
> >> > >   BOOTFS: [1b59000-1c59000] [C:50d000] root-x86-ginger.img
> >> > >   BOOTFS: [1c59000-72cd000] [C:50e000] system-x86-ginger.img
> >> > > MOE: cmdline:
> >> > >
> >> /home/akpolat/mysvn/l4android/l4android/src/src/l4/build/bin/x86_586/l4f/moe
> >> > > rom/lx_ginger.cfg
> >> > > MOE: Starting: rom/ned rom/lx_ginger.cfg
> >> > > MOE: loading 'rom/ned'
> >> > > Ned says: Hi World!
> >> > > Ned: loading file: 'rom/lx_ginger.cfg'
> >> > > io      | Dev_factory: register factory for N2Hw6DeviceE
> >> > > io      | GTF: register factory for 7Pci_dev
> >> > > io      | GTF: register factory for N2Hw12Msi_resourceE
> >> > > io      | Dev_factory: register factory for N2Hw11Gpio_deviceE
> >> > > io      | Io service
> >> > > io      | Find root Pointer
> >> > > io      | Find root Pointer: f09e0
> >> > > io      | ACPI: RSDP 0xf09e0 00014 (v00 BOCHS )
> >> > > io      | ACPI: RSDT 0xbb7ffbc1 00034 (v01 BOCHS  BXPCRSDT 00000001
> >> BXPC
> >> > > 00000001)
> >> > > io      |
> >> > >
> >> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/
> >> > > osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbff1c0, 0x80007d08,
> >> > > 0x80007d0c): UNINPLEMENTED
> >> > > io      | ACPI: FACP 0xbb7ff1c0 00074 (v01 BOCHS  BXPCFACP 00000001
> >> BXPC
> >> > > 00000001)
> >> > > io      |
> >> > >
> >> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/
> >> > > osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbfe040, 0x80007ce8,
> >> > > 0x80007cec): UNINPLEMENTED
> >> > > io      | ACPI: DSDT 0xbb7fe040 01180 (v01 BOCHS  BXPCDSDT 00000001
> >> BXPC
> >> > > 00000001)
> >> > > io      |
> >> > >
> >> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/
> >> > > osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbfe000, 0x80007ce8,
> >> > > 0x80007cec): UNINPLEMENTED
> >> > > io      | ACPI: FACS 0xbb7fe000 00040
> >> > > io      |
> >> > >
> >> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/
> >> > > osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbff234, 0x80007d08,
> >> > > 0x80007d0c): UNINPLEMENTED
> >> > > io      | ACPI: SSDT 0xbb7ff234 008DD (v01 BOCHS  BXPCSSDT 00000001
> >> BXPC
> >> > > 00000001)
> >> > > io      |
> >> > >
> >> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/
> >> > > osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbffb11, 0x80007d08,
> >> > > 0x80007d0c): UNINPLEMENTED
> >> > > io      | ACPI: APIC 0xbb7ffb11 00078 (v01 BOCHS  BXPCAPIC 00000001
> >> BXPC
> >> > > 00000001)
> >> > > io      |
> >> > >
> >> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/
> >> > > osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbffb89, 0x80007d08,
> >> > > 0x80007d0c): UNINPLEMENTED
> >> > > io      | ACPI: HPET 0xbb7ffb89 00038 (v01 BOCHS  BXPCHPET 00000001
> >> BXPC
> >> > > 00000001)
> >> > > io      | Parsing all Control Methods:
> >> > > io      | Table [DSDT](id 0001) - 144 Objects with 18 Devices 52
> >> Methods 8
> >> > > Regions
> >> > > io      | Parsing all Control Methods:
> >> > > io      | Table [SSDT](id 0002) - 155 Objects with 32 Devices 42
> >> Methods 1
> >> > > Regions
> >> > > io      | tbxfload-0274 [02] TbLoadNamespace       : ACPI Tables
> >> > > successfully acquired
> >> > > io      | evxfevnt-0175 [02] Enable                : Transition to
> >> ACPI
> >> > > mode successful
> >> > > io      | evgpeblk-0523 [04] EvCreateGpeBlock      : GPE 00 to 0F
> >> [_GPE] 2
> >> > > regs on int 0x9
> >> > > io      |
> >> > >
> >> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/
> >> > > osl-basic.cc:60:AcpiOsInstallInterruptHandler(9, 0x107d6c0, 0x3aa8):
> >> > > UNINPLEMENTED
> >> > > io      | Completing Region/Field/Buffer/Package
> >> > > initialization:.....................................
> >> > > io      | Initialized 9/9 Regions 2/2 Fields 21/21 Buffers 5/5
> >> Packages
> >> > > (308 nodes)
> >> > > io      | Initializing Device/Processor/Thermal objects by executing
> >> _INI
> >> > > methods:
> >> > > io      | Executed 0 _INI methods requiring 1 _STA executions
> >> (examined 53
> >> > > objects)
> >> > > io      | ACPICA-Version:20121018, System in ACPI MODE, 32bit timer
> >> > > io      | <0xb120>IRQ     [00000000000000-00000000000000 1] rising
> >> edge
> >> > > (32bit) (align=0 flags=44201)
> >> > > io      | <0x16b38>IRQ     [00000000000000-00000000000000 1] rising
> >> edge
> >> > > (32bit) (align=0 flags=44201)
> >> > > io      | Ready. Waiting for request.
> >> > > mag     | Hello from MAG
> >> > > fb      | Trying execution of ``set VBE mode'' using x86emu
> >> > > fb      | Found VESA BIOS version 3.0
> >> > > fb      | OEM SeaBIOS VBE(C) 2011
> >> > > rtc     | Date:21.07.2014 Time:15:05:38
> >> > >
> >> > > Best Regards,
> >> > > Cem Akpolat
> >> > >  _______________________________________________
> >> > > l4-hackers mailing list
> >> > > l4-hackers@os.inf.tu-dresden.de
> >> > > http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers
> >> > >
> >> > >
> >> > > matthias.lange@kernkonzept.com <michael.hohmuth@kernkonzept.com> -
> >> Tel.
> >> > > 0351-41 888 614
> >> > >
> >> > > Kernkonzept GmbH.  Sitz: Dresden.  Amtsgericht Dresden, HRB 31129.
> >> > > Geschäftsführer: Dr.-Ing. Michael Hohmuth
> >> > >
> >> > >
> >>
> >> --
> >> Matthias Lange, matthias.lange@kernkonzept.com, +49 - 351 - 41 88 86 14
> >>
> >> Kernkonzept GmbH.  Sitz: Dresden.  Amtsgericht Dresden, HRB 31129.
> >> Geschäftsführer: Dr.-Ing. Michael Hohmuth
> >>
> >>
> >

--
Matthias Lange, matthias.lange@kernkonzept.com, +49 - 351 - 41 88 86 14

Kernkonzept GmbH.  Sitz: Dresden.  Amtsgericht Dresden, HRB 31129.
Geschäftsführer: Dr.-Ing. Michael Hohmuth