27 Feb
2025
27 Feb
'25
9:27 p.m.
Hi Qiang,
so I got a peek into it. The systemd config in there points to ttyLF0
which is the UART type the S32G has. However, for the VM, it should
point to ttyAMA0. But I guess that's only relevant for the getty, i.e.,
actually being able to login. Then I'm just guessing, the /dev is empty.
Maybe some Linux config like DEVTMPFS needs to be enabled?
Adam
On Wed Feb 26, 2025 at 23:28:32 +0100, Adam Lackorzynski wrote:
> Hi Qiang,
>
> So if there's ttyAMA0 also mentioned on Xen's command line I'd think it
> should be supported. Could you send the initrd to me (privately, too big
> for the list) that I can have a look?
>
> Yes, indeed, the booting is quite similar. For L4Re we just have one
> image plus the device tree, so we just need to load two in this case.
> All the commands listed in the file seem to be related to Xen, so none
> of it is needed for L4Re.
>
>
> Adam
>
> On Tue Feb 25, 2025 at 15:38:17 +0800, qiang xu wrote:
> > I'm still not sure how to check if *'/dev/console'* or *'/dev/ttyAMA0'*
> > exist in the initrd, since these devices might require drivers to be loaded
> > at runtime before they can appear in the *'/dev'* directory. However, I
> > noticed that a normal Xen boot process executes a script during the U-Boot
> > stage. This script loads all the necessary files into memory, selects the
> > node, provides the system settings to Xen, and then U-Boot boots Xen.
> > Finally, Xen boots the Kernel image. The script mentions '*vpl011*' and '
> > *console=ttyAMA0*'. Does this imply that the initrd supports '*ttyAMA0*'?
> >
> > When I run L4Re, I didn't execute this step, which causes it to boot the
> > Xen VM instead of L4Re. This seems to be somewhat similar to the
> > functionality of L4Re. Did I miss something or confuse anything here?
> >
> > I have changed the script's file extension and placed it in the attachment.
> >
> > Regards,
> >
> > Qiang
> >
> > On Tue, Feb 25, 2025 at 2:01 PM Adam Lackorzynski <adam@l4re.org> wrote:
> >
> > > Hi Qiang,
> > >
> > > good idea with looking at the initcalls. I guess it is normal that some
> > > of the are failing as they, for example, look for a device which is not
> > > there.
> > >
> > > With the initrd coming from Xen, maybe they way input/output is done is
> > > specific to Xen. So is there a /dev/console, or /dev/ttyAMA0, in the
> > > initrd such that the shell can make its output visible? As the output
> > > just stops but also nothing more is happening, maybe we just do not see
> > > it.
> > >
> > > For your last question, I do not think this is in conflict, quite the
> > > contrary as the Linux is aware of running in a virtual environment.
> > > However, if something specific to Xen is being done that won't work on
> > > L4Re and needs to be figured out and changes.
> > > And don't worry, no question is silly :)
> > >
> > >
> > > Adam
> > >
> > > On Mon Feb 24, 2025 at 17:17:00 +0800, qiang xu wrote:
> > > > Hi Adam，
> > > >
> > > > When I changed from 'init' to '/bin/sh', I did not enter the expected
> > > > shell. To print more information, I changed the ‘*bootargs*‘ to
> > > ‘*bootargs
> > > > = "console=ttyAMA0 init=/bin/sh debug ignore_loglevel loglevel=8
> > > > initcall_debug"*’. The printed information is in the log file. I noticed
> > > > that several initcalls returned abnormal values. I'm not sure if these
> > > > anomalies are affecting my issue.
> > > >
> > > > Additionally, I want to mention that I saw someone in the S32G community
> > > > <
> > > https://community.nxp.com/t5/S32G/Hypervisor-support-on-S32G/m-p/1550392>
> > > > asking about L4Re. So, when creating the S32G Linux image, I referenced
> > > the
> > > > Xen Hypervisor Dom0less section. In the ‘*uvmm-io.ned*’ file, I specified
> > > > the rootfs via ‘*rd=fsl-image-dom0less-s32g274aevb.cpio.gz*’. It could be
> > > > because I used the Dom0less method to build the image that it caused some
> > > > Xen-related exceptions in the initcalls. Finally, I double-checked that
> > > > both 'init' and '/bin/sh' exist and have the correct permissions.
> > > >
> > > > I have one more question: Xen is a hypervisor, and Fiasco in L4Re is
> > > also a
> > > > hypervisor. Will this conflict, or am I misunderstanding something? I
> > > > apologize if these are naive questions, I'm not very familiar with this
> > > > area, and I might be asking a lot of silly questions.
> > > >
> > > > Regards,
> > > > Qiang
> > > >
> > > > On Sat, Feb 22, 2025 at 2:54 PM Adam Lackorzynski <adam@l4re.org> wrote:
> > > >
> > > > > Hi Qiang,
> > > > >
> > > > > what should the initrd, i.e., /init, actually do? Any change when you
> > > > > write init=/bin/sh instead of init=/init?
> > > > >
> > > > >
> > > > > Adam
> > > > >
> > > > > On Fri Feb 21, 2025 at 11:27:07 +0800, qiang xu wrote:
> > > > > > Hi Philipp,
> > > > > >
> > > > > > Thank you very much for the advice you provided. I have changed it to
> > > > > 512M.
> > > > > > It now runs without errors, but it gets stuck at:
> > > > > >
> > > > > > *vm1 | [ 1.753286] Freeing unused kernel memory: 1344K.*
> > > > > > Regards,
> > > > > > Qiang
> > > > > >
> > > > > > => fatload mmc 0 0x8000e000 l4re_uvmm-io.uimage
> > > > > > 46235855 bytes read in 1972 ms (22.4 MiB/s)
> > > > > > => fatload mmc 0 0x80000000 s32g2xxa-evb.dtb1
> > > > > > 54149 bytes read in 16 ms (3.2 MiB/s)
> > > > > > => bootm 0x8000e000 - 0x80000000
> > > > > > ## Booting kernel from Legacy Image at 8000e000 ...
> > > > > > Image Name: L4 Image #27
> > > > > > Image Type: AArch64 Linux Kernel Image (uncompressed)
> > > > > > Data Size: 46235791 Bytes = 44.1 MiB
> > > > > > Load Address: 91000000
> > > > > > Entry Point: 91000000
> > > > > > Verifying Checksum ... OK
> > > > > > ## Flattened Device Tree blob at 80000000
> > > > > > Booting using the fdt blob at 0x80000000
> > > > > > Loading Kernel Image
> > > > > > Using Device Tree in place at 0000000080000000, end
> > > 0000000080010384
> > > > > > fixup: pfe0 set to 00:01:be:be:ef:11
> > > > > > fixup: pfe1 set to 00:01:be:be:ef:22
> > > > > > fixup: pfe2 set to 00:01:be:be:ef:33
> > > > > >
> > > > > > Starting kernel ...
> > > > > >
> > > > > >
> > > > > > L4 Bootstrapper
> > > > > > Build: #27 Fri Feb 21 10:21:53 CST 2025, 11.4.0
> > > > > > RAM: 0000000080000000 - 00000000ffffffff: 2097152kB
> > > > > > RAM: 0000000880000000 - 00000008dfffffff: 1572864kB
> > > > > > Total RAM: 3584MB
> > > > > > Scanning fiasco
> > > > > > Scanning sigma0
> > > > > > Scanning moe
> > > > > > Moving up to 15 modules behind 81300000
> > > > > > moving module 00 { 9101f000-910e5fe7 } -> { 8600a000-860d0fe7 }
> > > > > [815080]
> > > > > > moving module 01 { 910e6000-910ebcd7 } -> { 860d1000-860d6cd7 }
> > > [23768]
> > > > > > moving module 02 { 910ec000-9111e6cf } -> { 860d7000-861096cf }
> > > > > [206544]
> > > > > > moving module 03 { 9111f000-9121258f } -> { 8610a000-861fd58f }
> > > > > [996752]
> > > > > > moving module 04 { 91213000-9122e537 } -> { 861fe000-86219537 }
> > > > > [111928]
> > > > > > moving module 05 { 9122f000-912b7aa7 } -> { 8621a000-862a2aa7 }
> > > > > [559784]
> > > > > > moving module 06 { 912b8000-912c5384 } -> { 862a3000-862b0384 }
> > > [54149]
> > > > > > moving module 07 { 912c6000-92bd9a52 } -> { 862b1000-87bc4a52 }
> > > > > [26294867]
> > > > > > moving module 08 { 92bda000-92bdb218 } -> { 87bc5000-87bc6218 }
> > > [4633]
> > > > > > moving module 09 { 92bdc000-92bdc29a } -> { 87bc7000-87bc729a }
> > > [667]
> > > > > > moving module 10 { 92bdd000-939bd807 } -> { 87bc8000-889a8807 }
> > > > > [14551048]
> > > > > > moving module 11 { 939be000-93a03faf } -> { 889a9000-889eefaf }
> > > > > [286640]
> > > > > > moving module 12 { 93a04000-93c16a87 } -> { 889ef000-88c01a87 }
> > > > > [2173576]
> > > > > > moving module 13 { 93c17000-93c171f7 } -> { 88c02000-88c021f7 }
> > > [504]
> > > > > > moving module 14 { 93c18000-93c1808e } -> { 88c03000-88c0308e }
> > > [143]
> > > > > > Loading fiasco
> > > > > > found node 0 kernel info page (via ELF) at 0x80203000
> > > > > > Loading sigma0
> > > > > > Loading moe
> > > > > > found node 0 kernel options (via ELF) at 0x80204000
> > > > > > Sigma0 config node: 0 ip:860003f4
> > > > > > Roottask config node: 0 ip:80841904
> > > > > > Regions of list 'regions'
> > > > > > [ 34000000, 3407ffff] { 80000} Arch pfebufs@34000000
> > > > > > [ 34080000, 3409ffff] { 20000} Arch pfebufs@34080000
> > > > > > [ 80000000, 8000dfff] { e000} Root dtb
> > > > > > [ 8000e000, 8000efff] { 1000} Root mbi_rt
> > > > > > [ 80201000, 80205847] { 4848} Kern fiasco
> > > > > > [ 80400000, 8061dfff] { 21e000} Kern fiasco
> > > > > > [ 80840000, 8087d817] { 3d818} Root moe
> > > > > > [ 83200000, 835dffff] { 3e0000} Arch pfebufs@83200000
> > > > > > [ 835e0000, 835fffff] { 20000} Arch pfebufs@835e0000
> > > > > > [ 84000000, 843fffff] { 400000} Arch shm@84000000
> > > > > > [ 85000000, 85000fff] { 1000} Arch ddr@85000000
> > > > > > [ 86000000, 8600946f] { 9470} Sigma0 sigma0
> > > > > > [ 8610a000, 88c0308e] { 2af908f} Root Module
> > > > > > [ 91000158, 91000187] { 30} Root cpu_boot
> > > > > > [ 9101e1d0, 9101ecdc] { b0d} Boot modinfo
> > > > > > [ c0000000, c03fffff] { 400000} Arch shm@c0000000
> > > > > > [ c0400000, c07fffff] { 400000} Arch shm@c0400000
> > > > > > [ d0000000, d000007f] { 80} Arch shm@d0000000
> > > > > > [ d0000080, d00000ff] { 80} Arch shm@d0000080
> > > > > > [ ff800000, ff9fffff] { 200000} Arch atf@ff800000
> > > > > > Starting kernel fiasco at 80201190
> > > > > > Hello from Startup::stage2
> > > > > > Reserved 216 MiB as kernel memory.
> > > > > > Number of IRQs available at this GIC: 576
> > > > > > CPU0: GIC Redistributor at ffff00480000 for 0x0
> > > > > > Detecting PSCI ...
> > > > > > Detected PSCI v1.1
> > > > > > PSCI: CPU_SUSPEND format original v0.2, does not support OS-initiated
> > > > > mode
> > > > > > PSCI: TOS: Not present or not required.
> > > > > > FPU: Initialize
> > > > > > ARM generic timer: freq=5000000 interval=5000 cnt=1137745716
> > > > > > SERIAL ESC: allocated IRQ 114 for serial uart
> > > > > > Not using serial hack in slow timer handler.
> > > > > > Welcome to the L4Re Microkernel!
> > > > > > L4Re Microkernel on arm-64
> > > > > > Rev: unknown compiled with gcc 11.4.0 for NXP S32G []
> > > > > > Build: #12 Tue Feb 18 14:17:13 CST 2025
> > > > > >
> > > > > > Cache config: ON
> > > > > > CPU1: GIC Redistributor at ffff004a0000 for 0x1
> > > > > > CPU1: ID_PFR[01]: 01002222 00000000 ID_[DA]FR0: 10305106 00000000
> > > > > > ID_MMFR[04]: 00001122 00000000 00000000 00000000
> > > > > > CPU2: GIC Redistributor at ffff004c0000 for 0x100
> > > > > > CPU2: ID_PFR[01]: 01002222 00000000 ID_[DA]FR0: 10305106 00000000
> > > > > > ID_MMFR[04]: 00001122 00000000 00000000 00000000
> > > > > > CPU3: GIC Redistributor at ffff004e0000 for 0x101
> > > > > > Calibrating timer loop...
> > > > > > CPU3: ID_PFR[01]: 01002222 00000000 ID_[DA]FR0: 10305106 00000000
> > > > > > ID_MMFR[04]: 00001122 00000000 00000000 00000000
> > > > > > Timer calibration done.
> > > > > > MDB: use page size: 30
> > > > > > MDB: use page size: 21
> > > > > > MDB: use page size: 12
> > > > > > SIGMA0: Hello!
> > > > > > KIP @ 80203000
> > > > > > allocated 4KB for maintenance structures
> > > > > > SIGMA0: Dump of all resource maps
> > > > > > RAM:------------------------
> > > > > > [4:---:80000000;8000dfff]
> > > > > > [4:RWX:8000e000;8000efff]
> > > > > > [0:RWX:8000f000;80200fff]
> > > > > > [0:RWX:80206000;803fffff]
> > > > > > [0:RWX:8061e000;8083ffff]
> > > > > > [4:RWX:80840000;8087dfff]
> > > > > > [0:RWX:8087e000;831fffff]
> > > > > > [0:RWX:83600000;83ffffff]
> > > > > > [0:RWX:84400000;84ffffff]
> > > > > > [0:RWX:85001000;85ffffff]
> > > > > > [0:RWX:8600a000;86109fff]
> > > > > > [4:RWX:8610a000;88c03fff]
> > > > > > [0:RWX:88c04000;90ffffff]
> > > > > > [4:---:91000000;91000fff]
> > > > > > [0:RWX:91001000;bfffffff]
> > > > > > [0:RWX:c0800000;cfffffff]
> > > > > > [0:RWX:d0001000;ff7fffff]
> > > > > > [0:RWX:ffa00000;ffffffff]
> > > > > > [0:RWX:880000000;8d27fffff]
> > > > > > IOMEM:----------------------
> > > > > > [0:RW-:0;7fffffff]
> > > > > > [0:RW-:83200000;835fffff]
> > > > > > [0:RW-:84000000;843fffff]
> > > > > > [0:RW-:85000000;85000fff]
> > > > > > [0:RW-:c0000000;c07fffff]
> > > > > > [0:RW-:d0000000;d0000fff]
> > > > > > [0:RW-:ff800000;ff9fffff]
> > > > > > [0:RW-:100000000;87fffffff]
> > > > > > [0:RW-:8e0000000;ffffffffffffffff]
> > > > > > MOE: Hello world
> > > > > > MOE: found 3383848 KByte free memory
> > > > > > MOE: found RAM from 8000f000 to 8d2800000
> > > > > > MOE: allocated 34088 KByte for the page array @0x8087e000
> > > > > > MOE: virtual user address space [0-ffffffffff]
> > > > > > MOE: cmdline: moe rom/uvmm-io.ned
> > > > > > MOE: rom name space cap -> [C:103000]
> > > > > > MOE: rwfs name space cap -> [C:105000]
> > > > > > ROMFS: [8610a000-861fd590] [C:107000] uvmm
> > > > > > ROMFS: [861fe000-86219538] [C:109000] l4re
> > > > > > ROMFS: [8621a000-862a2aa8] [C:10b000] ned
> > > > > > ROMFS: [862a3000-862b0385] [C:10d000] s32g2xxa-evb.dtb1
> > > > > > ROMFS: [862b1000-87bc4a53] [C:10f000]
> > > > > > fsl-image-dom0less-s32g274aevb.cpio.gz
> > > > > > ROMFS: [87bc5000-87bc6219] [C:111000] vmm.lua
> > > > > > ROMFS: [87bc7000-87bc729b] [C:113000] uvmm-io.ned
> > > > > > ROMFS: [87bc8000-889a8808] [C:115000] Image
> > > > > > ROMFS: [889a9000-889eefb0] [C:117000] cons
> > > > > > ROMFS: [889ef000-88c01a88] [C:119000] io
> > > > > > ROMFS: [88c02000-88c021f8] [C:11b000] io.cfg
> > > > > > ROMFS: [88c03000-88c0308f] [C:11d000] vm_hw.vbus
> > > > > > ROMFS: [80000000-8000e000] [C:11f000] .fdt
> > > > > > MOE: Starting: rom/ned rom/uvmm-io.ned
> > > > > > MOE: loading 'rom/ned'
> > > > > > Ned says: Hi World!
> > > > > > Ned: loading file: 'rom/uvmm-io.ned'
> > > > > > Console Server
> > > > > > cons>
> > > > > > Created vcon channel: io [420010]
> > > > > > cons>
> > > > > > io | Io service
> > > > > > io | Verboseness level: 7
> > > > > > io | unused physical memory space:
> > > > > >
> > > > > > Created vcon channel: vm1 [421010]
> > > > > > cons>
> > > > > > io | [00000000000000-00000033ffffff]
> > > > > >
> > > > > > Created vcon channel: mon1 [422010]
> > > > > > cons>
> > > > > > io | [000000340a0000-0000007fffffff]
> > > > > > io | [00000100000000-0000087fffffff]
> > > > > > io | [000008e0000000-ffffffffffffffff]
> > > > > > io | no 'iommu' capability found, using CPU-phys for DMA
> > > > > > io | Loading: config 'rom/io.cfg'
> > > > > > io | Loading: config 'rom/vm_hw.vbus'
> > > > > > io | Add IRQ resources to vbus: IRQ
> > > > > [00000000000007-00000000000007
> > > > > > 1] level high (align=0 flags=300001)
> > > > > > io | Add IRQ resources to vbus: IRQ
> > > > > [00000000000079-00000000000079
> > > > > > 1] raising edge (align=0 flags=100001)
> > > > > > io | vm_hw: [N12_GLOBAL__N_112Virtual_sbusE]
> > > > > > io | Resources: ==== start ====
> > > > > > io | Resources: ===== end =====
> > > > > > io | L4ICU: [N2Vi6Sw_icuE]
> > > > > > io | Resources: ==== start ====
> > > > > > io | Resources: ===== end =====
> > > > > > io | PMU: [N2Vi9Proxy_devE]
> > > > > > io | Resources: ==== start ====
> > > > > > io | IRQ [00000000000007-00000000000007 1] level high
> > > > > (align=0
> > > > > > flags=300001)
> > > > > > io | Resources: ===== end =====
> > > > > > io | UART0: [N2Vi9Proxy_devE]
> > > > > > io | Resources: ==== start ====
> > > > > > io | IRQ [00000000000079-00000000000079 1] raising edge
> > > > > > (align=0 flags=100001)
> > > > > > io | IOMEM [00000000002000-00000000003000 1001] 32-bit
> > > > > non-pref
> > > > > > (align=1000 flags=300002)
> > > > > > io | Resources: ===== end =====
> > > > > > io | Real Hardware -----------------------------------
> > > > > > io | System Bus:
> > > > > > io | Resources: ==== start ====
> > > > > > io | DMADOM [00000000000000-00000000000000 1] (align=0
> > > flags=6)
> > > > > > io | Resources: ===== end =====
> > > > > > io | pmu:
> > > > > > io | compatible= { "arm,armv8-pmuv3" }
> > > > > > io | Clients: ===== start ====
> > > > > > io | PMU: [N2Vi9Proxy_devE]
> > > > > > io | Clients: ===== end ====
> > > > > > io | Resources: ==== start ====
> > > > > > io | IRQ [00000000000007-00000000000007 1] level high
> > > > > (align=0
> > > > > > flags=300001)
> > > > > > io | Resources: ===== end =====
> > > > > > io | uart0:
> > > > > > io | compatible= { "arm,pl011" }
> > > > > > io | Clients: ===== start ====
> > > > > > io | UART0: [N2Vi9Proxy_devE]
> > > > > > io | Clients: ===== end ====
> > > > > > io | Resources: ==== start ====
> > > > > > io | IRQ [00000000000079-00000000000079 1] raising edge
> > > > > > (align=0 flags=100001)
> > > > > > io | IOMEM [00000000002000-00000000003000 1001] 32-bit
> > > > > non-pref
> > > > > > (align=1000 flags=300002)
> > > > > > io | Resources: ===== end =====
> > > > > > io | warning: could not register control interface at cap
> > > > > > 'platform_ctl'
> > > > > > io | Ready. Waiting for request.
> > > > > > io | vbus vm_hw does not support a global DMA domain
> > > > > > vm1 | VMM[main]: Hello out there.
> > > > > > vm1 | VMM[ram]: No memory nodes found, setting up default region
> > > > > > vm1 | Command line: console=ttyAMA0 earlyprintk=1 rdinit=/init
> > > > > > vm1 | VMM[]: virtio_net@10000.l4vmm,virtiocap: capability net is
> > > > > > invalid.
> > > > > > vm1 | VMM[vm]: Device creation for virtual device
> > > virtio_net@10000
> > > > > > failed. Disabling device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'pmu' IRQ
> > > 23.
> > > > > > vm1 | VMM[vm]: Device creation for pmu failed. Disabling device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'shm@c0000000
> > > > > '.reg[0]
> > > > > > (0xc0000000-0xc03fffff).
> > > > > > vm1 | VMM[vm]: Device creation for shm@c0000000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'shm@c0400000
> > > > > '.reg[0]
> > > > > > (0xc0400000-0xc07fffff).
> > > > > > vm1 | VMM[vm]: Device creation for shm@c0400000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'shm@d0000000
> > > > > '.reg[0]
> > > > > > (0xd0000000-0xd000007f).
> > > > > > vm1 | VMM[vm]: Device creation for shm@d0000000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'shm@d0000080
> > > > > '.reg[0]
> > > > > > (0xd0000080-0xd00000ff).
> > > > > > vm1 | VMM[vm]: Device creation for shm@d0000080 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'shm@84000000
> > > > > '.reg[0]
> > > > > > (0x84000000-0x843fffff).
> > > > > > vm1 | VMM[vm]: Device creation for shm@84000000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'pfebufs@34000000'.reg[0]
> > > > > > (0x34000000-0x3407ffff).
> > > > > > vm1 | VMM[vm]: Device creation for pfebufs@34000000 failed.
> > > > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'pfebufs@34080000'.reg[0]
> > > > > > (0x34080000-0x3409ffff).
> > > > > > vm1 | VMM[vm]: Device creation for pfebufs@34080000 failed.
> > > > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'pfebufs@83200000'.reg[0]
> > > > > > (0x83200000-0x835dffff).
> > > > > > vm1 | VMM[vm]: Device creation for pfebufs@83200000 failed.
> > > > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'pfebufs@835e0000'.reg[0]
> > > > > > (0x835e0000-0x835fffff).
> > > > > > vm1 | VMM[vm]: Device creation for pfebufs@835e0000 failed.
> > > > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'ddr@85000000
> > > > > '.reg[0]
> > > > > > (0x85000000-0x85000fff).
> > > > > > vm1 | VMM[vm]: Device creation for ddr@85000000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'scmi' IRQ
> > > 332.
> > > > > > vm1 | VMM[vm]: Device creation for scmi failed. Disabling device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'rtc@40060000
> > > > > '.reg[0]
> > > > > > (0x40060000-0x40060fff).
> > > > > > vm1 | VMM[vm]: Device creation for rtc@40060000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'syscon@4007c000'.reg[0]
> > > > > > (0x4007c000-0x4007c0ff).
> > > > > > vm1 | VMM[vm]: Device creation for syscon@4007c000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'ddr_gpr@4007c600'.reg[0]
> > > > > > (0x4007c600-0x4007c61f).
> > > > > > vm1 | VMM[vm]: Device creation for ddr_gpr@4007c600 failed.
> > > > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'nvram@4009c000'.reg[0]
> > > > > > (0x4009c000-0x4009c00f).
> > > > > > vm1 | VMM[vm]: Device creation for nvram@4009c000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'siul2-pinctrl@4009c240'.reg[0] (0x4009c240-0x4009c3d7).
> > > > > > vm1 | VMM[vm]: Device creation for siul2-pinctrl@4009c240
> > > failed.
> > > > > > Disabling device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'siul2-gpio@4009d700'.reg[0] (0x4009d700-0x4009d70f).
> > > > > > vm1 | VMM[vm]: Device creation for siul2-gpio@4009d700 failed.
> > > > > > Disabling device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'nvram@44010000'.reg[0]
> > > > > > (0x44010000-0x4401000f).
> > > > > > vm1 | VMM[vm]: Device creation for nvram@44010000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'ocotp@400a4000'.reg[0]
> > > > > > (0x400a4000-0x400a43ff).
> > > > > > vm1 | VMM[vm]: Device creation for ocotp@400a4000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'tmu@400a8000
> > > > > '.reg[0]
> > > > > > (0x400a8000-0x400aafff).
> > > > > > vm1 | VMM[vm]: Device creation for tmu@400a8000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'watchdog@4010c000'.reg[0]
> > > > > > (0x4010c000-0x4010cfff).
> > > > > > vm1 | VMM[vm]: Device creation for watchdog@4010c000 failed.
> > > > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'stm@4011c000
> > > > > '.reg[0]
> > > > > > (0x4011c000-0x4011efff).
> > > > > > vm1 | VMM[vm]: Device creation for stm@4011c000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'stm@40120000
> > > > > '.reg[0]
> > > > > > (0x40120000-0x40122fff).
> > > > > > vm1 | VMM[vm]: Device creation for stm@40120000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'spi@40134000
> > > > > '.reg[0]
> > > > > > (0x0-0x1fffffff).
> > > > > > vm1 | VMM[vm]: Device creation for spi@40134000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'dma-controller@40144000'.reg[0] (0x40144000-0x40167fff).
> > > > > > vm1 | VMM[vm]: Device creation for dma-controller@40144000
> > > failed.
> > > > > > Disabling device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'pit@40188000
> > > > > '.reg[0]
> > > > > > (0x40188000-0x4018afff).
> > > > > > vm1 | VMM[vm]: Device creation for pit@40188000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'mscm@40198000
> > > > > '.reg[0]
> > > > > > (0x40198000-0x40198fff).
> > > > > > vm1 | VMM[vm]: Device creation for mscm@40198000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'flexcan@401b4000'.reg[0]
> > > > > > (0x401b4000-0x401bdfff).
> > > > > > vm1 | VMM[vm]: Device creation for flexcan@401b4000 failed.
> > > > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'serial@401c8000'.reg[0]
> > > > > > (0x401c8000-0x401cafff).
> > > > > > vm1 | VMM[vm]: Device creation for serial@401c8000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'serial@401cc000'.reg[0]
> > > > > > (0x401cc000-0x401cefff).
> > > > > > vm1 | VMM[vm]: Device creation for serial@401cc000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'spi@401d8000
> > > > > '.reg[0]
> > > > > > (0x401d8000-0x401d8fff).
> > > > > > vm1 | VMM[vm]: Device creation for spi@401d8000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'i2c@401e4000
> > > > > '.reg[0]
> > > > > > (0x401e4000-0x401e4fff).
> > > > > > vm1 | VMM[vm]: Device creation for i2c@401e4000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'i2c@401e8000
> > > > > '.reg[0]
> > > > > > (0x401e8000-0x401e8fff).
> > > > > > vm1 | VMM[vm]: Device creation for i2c@401e8000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'i2c@401ec000
> > > > > '.reg[0]
> > > > > > (0x401ec000-0x401ecfff).
> > > > > > vm1 | VMM[vm]: Device creation for i2c@401ec000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'pwm@401f4000
> > > > > '.reg[0]
> > > > > > (0x401f4000-0x401f4fff).
> > > > > > vm1 | VMM[vm]: Device creation for pwm@401f4000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'adc@401f8000
> > > > > '.reg[0]
> > > > > > (0x401f8000-0x401f8fff).
> > > > > > vm1 | VMM[vm]: Device creation for adc@401f8000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'watchdog@40200000'.reg[0]
> > > > > > (0x40200000-0x40200fff).
> > > > > > vm1 | VMM[vm]: Device creation for watchdog@40200000 failed.
> > > > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'watchdog@40204000'.reg[0]
> > > > > > (0x40204000-0x40204fff).
> > > > > > vm1 | VMM[vm]: Device creation for watchdog@40204000 failed.
> > > > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'watchdog@40208000'.reg[0]
> > > > > > (0x40208000-0x40208fff).
> > > > > > vm1 | VMM[vm]: Device creation for watchdog@40208000 failed.
> > > > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'mu0b@40210000
> > > > > '.reg[0]
> > > > > > (0x40210000-0x40210fff).
> > > > > > vm1 | VMM[vm]: Device creation for mu0b@40210000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'mu1b@40211000
> > > > > '.reg[0]
> > > > > > (0x40211000-0x40211fff).
> > > > > > vm1 | VMM[vm]: Device creation for mu1b@40211000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'mu2b@40212000
> > > > > '.reg[0]
> > > > > > (0x40212000-0x40212fff).
> > > > > > vm1 | VMM[vm]: Device creation for mu2b@40212000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'mu3b@40213000
> > > > > '.reg[0]
> > > > > > (0x40213000-0x40213fff).
> > > > > > vm1 | VMM[vm]: Device creation for mu3b@40213000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'stm@40228000
> > > > > '.reg[0]
> > > > > > (0x40228000-0x4022afff).
> > > > > > vm1 | VMM[vm]: Device creation for stm@40228000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'dma-controller@40244000'.reg[0] (0x40244000-0x40267fff).
> > > > > > vm1 | VMM[vm]: Device creation for dma-controller@40244000
> > > failed.
> > > > > > Disabling device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'pit@40288000
> > > > > '.reg[0]
> > > > > > (0x40288000-0x4028afff).
> > > > > > vm1 | VMM[vm]: Device creation for pit@40288000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'flexcan@402a8000'.reg[0]
> > > > > > (0x402a8000-0x402b1fff).
> > > > > > vm1 | VMM[vm]: Device creation for flexcan@402a8000 failed.
> > > > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'flexcan@402b2000'.reg[0]
> > > > > > (0x402b2000-0x402bbfff).
> > > > > > vm1 | VMM[vm]: Device creation for flexcan@402b2000 failed.
> > > > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'serial@402bc000'.reg[0]
> > > > > > (0x402bc000-0x402befff).
> > > > > > vm1 | VMM[vm]: Device creation for serial@402bc000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'spi@402d0000
> > > > > '.reg[0]
> > > > > > (0x402d0000-0x402d0fff).
> > > > > > vm1 | VMM[vm]: Device creation for spi@402d0000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'i2c@402dc000
> > > > > '.reg[0]
> > > > > > (0x402dc000-0x402dcfff).
> > > > > > vm1 | VMM[vm]: Device creation for i2c@402dc000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'pwm@402e4000
> > > > > '.reg[0]
> > > > > > (0x402e4000-0x402e4fff).
> > > > > > vm1 | VMM[vm]: Device creation for pwm@402e4000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'adc@402e8000
> > > > > '.reg[0]
> > > > > > (0x402e8000-0x402e8fff).
> > > > > > vm1 | VMM[vm]: Device creation for adc@402e8000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'mmc@402f0000
> > > > > '.reg[0]
> > > > > > (0x402f0000-0x402f0fff).
> > > > > > vm1 | VMM[vm]: Device creation for mmc@402f0000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'fccu@4030c000
> > > > > '.reg[0]
> > > > > > (0x4030c000-0x4030efff).
> > > > > > vm1 | VMM[vm]: Device creation for fccu@4030c000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'ethernet@4033c000'.reg[0]
> > > > > > (0x4033c000-0x4033dfff).
> > > > > > vm1 | VMM[vm]: Device creation for ethernet@4033c000 failed.
> > > > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'ddr_errata@403c0000'.reg[0] (0x403c0000-0x403c00ff).
> > > > > > vm1 | VMM[vm]: Device creation for ddr_errata@403c0000 failed.
> > > > > > Disabling device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'ddr-perf@403e0000'.reg[0]
> > > > > > (0x403e0000-0x403e00ff).
> > > > > > vm1 | VMM[vm]: Device creation for ddr-perf@403e0000 failed.
> > > > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'pcie@40400000
> > > > > '.reg[0]
> > > > > > (0x40400000-0x40400fff).
> > > > > > vm1 | VMM[vm]: Device creation for pcie@40400000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'serdes@40480000'.reg[0]
> > > > > > (0x40480000-0x40480107).
> > > > > > vm1 | VMM[vm]: Device creation for serdes@40480000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'pcie@44100000
> > > > > '.reg[0]
> > > > > > (0x44100000-0x44100fff).
> > > > > > vm1 | VMM[vm]: Device creation for pcie@44100000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'serdes@44180000'.reg[0]
> > > > > > (0x44180000-0x44180107).
> > > > > > vm1 | VMM[vm]: Device creation for serdes@44180000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'pfe@46000000
> > > > > '.reg[0]
> > > > > > (0x46000000-0x46ffffff).
> > > > > > vm1 | VMM[vm]: Device creation for pfe@46000000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'llce_dte_sram@43000000'.reg[0] (0x43000000-0x43001fff).
> > > > > > vm1 | VMM[vm]: Device creation for llce_dte_sram@43000000
> > > failed.
> > > > > > Disabling device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'llce_ppe_rx_sram@43100000'.reg[0] (0x43100000-0x43107fff).
> > > > > > vm1 | VMM[vm]: Device creation for llce_ppe_rx_sram@43100000
> > > failed.
> > > > > > Disabling device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'llce_ppe_tx_sram@43200000'.reg[0] (0x43200000-0x43207fff).
> > > > > > vm1 | VMM[vm]: Device creation for llce_ppe_tx_sram@43200000
> > > failed.
> > > > > > Disabling device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'llce_frpe_sram@43300000'.reg[0] (0x43300000-0x4330ffff).
> > > > > > vm1 | VMM[vm]: Device creation for llce_frpe_sram@43300000
> > > failed.
> > > > > > Disabling device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'llce_shmem@43800000'.reg[0] (0x43800000-0x4384ffff).
> > > > > > vm1 | VMM[vm]: Device creation for llce_shmem@43800000 failed.
> > > > > > Disabling device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'llce@43a00000
> > > > > '.reg[0]
> > > > > > (0x43ff8000-0x43ffbfff).
> > > > > > vm1 | VMM[vm]: Device creation for llce@43a00000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > 'usbmisc@44064200'.reg[0]
> > > > > > (0x44064200-0x440643ff).
> > > > > > vm1 | VMM[vm]: Device creation for usbmisc@44064200 failed.
> > > > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > 'usb@44064000
> > > > > '.reg[0]
> > > > > > (0x44064000-0x440641ff).
> > > > > > vm1 | VMM[vm]: Device creation for usb@44064000 failed.
> > > Disabling
> > > > > > device.
> > > > > > vm1 | VMM[ram]: Cleaning caches for device tree
> > > [21ff2000-21fff728]
> > > > > > ([b11f2000])
> > > > > > io | new iomem region: p=00000000000000 v=00000000400000
> > > s=400000
> > > > > > (bmb=0x39bc0)
> > > > > > io | map mem: p=00000000002000 v=00000000402000 s=2000 uncached:
> > > > > > done(0)
> > > > > > vm1 | VMM[]: Starting Cpu0 @ 0x91200000 in 64Bit mode (handler @
> > > > > > 1078e08, stack: 801ffba0, task: 420000, mpidr: 80000000 (orig:
> > > 80000000)
> > > > > > vm1 | ffffffc0080202c4: mrs r0, S3_1_C11_C0_2 (hsr=62346c01)
> > > > > > vm1 | VMM[]: Starting Cpu1 @ 0x91ae7254 in 64Bit mode (handler @
> > > > > > 1078e08, stack: 400f20, task: 420000, mpidr: 80000001 (orig:
> > > 80000000)
> > > > > > vm1 | ffffffc0080202c4: mrs r0, S3_1_C11_C0_2 (hsr=62346c01)
> > > > > > vm1 | VMM[]: Starting Cpu2 @ 0x91ae7254 in 64Bit mode (handler @
> > > > > > 1078e08, stack: 5fff20, task: 420000, mpidr: 80000100 (orig:
> > > 80000000)
> > > > > > vm1 | ffffffc0080202c4: mrs r0, S3_1_C11_C0_2 (hsr=62346c01)
> > > > > > vm1 | VMM[]: Starting Cpu3 @ 0x91ae7254 in 64Bit mode (handler @
> > > > > > 1078e08, stack: 7fef20, task: 420000, mpidr: 80000101 (orig:
> > > 80000000)
> > > > > > vm1 | ffffffc0080202c4: mrs r0, S3_1_C11_C0_2 (hsr=62346c01)
> > > > > > vm1 | [ 0.000000] Booting Linux on physical CPU 0x0000000000
> > > > > > [0x410fd034]
> > > > > > vm1 | [ 0.000000] Linux version 5.15.119-rt65+ge18f05316cd9
> > > > > > (oe-user@oe-host) (aarch64-fsl-linux-gcc (GCC) 11.3.0, GNU ld (GNU
> > > > > > Binutils) 2.38.20220708) #1 SMP PREEMPT Fri Sep 15 16:46:03 UTC 2023
> > > > > > vm1 | [ 0.000000] Machine model: NXP S32G2XXX-EVB
> > > > > > vm1 | [ 0.000000] Zone ranges:
> > > > > > vm1 | [ 0.000000] DMA [mem
> > > > > > 0x0000000091200000-0x00000000b11fffff]
> > > > > > vm1 | [ 0.000000] DMA32 empty
> > > > > > vm1 | [ 0.000000] Normal empty
> > > > > > vm1 | [ 0.000000] Movable zone start for each node
> > > > > > vm1 | [ 0.000000] Early memory node ranges
> > > > > > vm1 | [ 0.000000] node 0: [mem
> > > > > > 0x0000000091200000-0x00000000b11fffff]
> > > > > > vm1 | [ 0.000000] Initmem setup node 0 [mem
> > > > > > 0x0000000091200000-0x00000000b11fffff]
> > > > > > vm1 | [ 0.000000] On node 0, zone DMA: 4608 pages in
> > > unavailable
> > > > > > ranges
> > > > > > vm1 | [ 0.000000] On node 0, zone DMA: 28160 pages in
> > > unavailable
> > > > > > ranges
> > > > > > vm1 | [ 0.000000] cma: Reserved 256 MiB at 0x000000009e800000
> > > > > > vm1 | [ 0.000000] psci: probing for conduit method from DT.
> > > > > > vm1 | [ 0.000000] psci: PSCIv1.0 detected in firmware.
> > > > > > vm1 | [ 0.000000] psci: Using standard PSCI v0.2 function IDs
> > > > > > vm1 | [ 0.000000] psci: Trusted OS migration not required
> > > > > > vm1 | [ 0.000000] psci: SMC Calling Convention v1.0
> > > > > > vm1 | [ 0.000000] percpu: Embedded 18 pages/cpu s34200 r8192
> > > > > d31336
> > > > > > u73728
> > > > > > vm1 | [ 0.000000] Detected VIPT I-cache on CPU0
> > > > > > vm1 | [ 0.000000] CPU features: detected: GIC system register
> > > CPU
> > > > > > interface
> > > > > > vm1 | [ 0.000000] CPU features: detected: ARM erratum 845719
> > > > > > vm1 | [ 0.000000] CPU features: detected: ARM errata 1165522,
> > > > > > 1319367, 1530923, or 1530924
> > > > > > vm1 | [ 0.000000] Built 1 zonelists, mobility grouping on.
> > > Total
> > > > > > pages: 129280
> > > > > > vm1 | [ 0.000000] Kernel command line: console=ttyAMA0
> > > > > earlyprintk=1
> > > > > > rdinit=/init
> > > > > > vm1 | [ 0.000000] Unknown kernel command line parameters
> > > > > > "earlyprintk=1", will be passed to user space.
> > > > > > vm1 | [ 0.000000] Dentry cache hash table entries: 65536
> > > (order:
> > > > > 7,
> > > > > > 524288 bytes, linear)
> > > > > > vm1 | [ 0.000000] Inode-cache hash table entries: 32768
> > > (order: 6,
> > > > > > 262144 bytes, linear)
> > > > > > vm1 | [ 0.000000] mem auto-init: stack:off, heap alloc:off,
> > > heap
> > > > > > free:off
> > > > > > vm1 | [ 0.000000] Memory: 207244K/524288K available (9088K
> > > kernel
> > > > > > code, 642K rwdata, 3036K rodata, 1344K init, 220K bss, 54900K
> > > reserved,
> > > > > > 262144K cma-reserved)
> > > > > > vm1 | [ 0.000000] rcu: Preemptible hierarchical RCU
> > > > > implementation.
> > > > > > vm1 | [ 0.000000] rcu: RCU event tracing is enabled.
> > > > > > vm1 | [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8
> > > to
> > > > > > nr_cpu_ids=4.
> > > > > > vm1 | [ 0.000000] Trampoline variant of Tasks RCU
> > > enabled.
> > > > > > vm1 | [ 0.000000] Tracing variant of Tasks RCU enabled.
> > > > > > vm1 | [ 0.000000] rcu: RCU calculated value of
> > > > > scheduler-enlistment
> > > > > > delay is 25 jiffies.
> > > > > > vm1 | [ 0.000000] rcu: Adjusting geometry for
> > > rcu_fanout_leaf=16,
> > > > > > nr_cpu_ids=4
> > > > > > vm1 | [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated
> > > irqs: 0
> > > > > > vm1 | [ 0.000000] GICv3: 988 SPIs implemented
> > > > > > vm1 | [ 0.000000] GICv3: 0 Extended SPIs implemented
> > > > > > vm1 | [ 0.000000] GICv3: Distributor has no Range Selector
> > > support
> > > > > > vm1 | [ 0.000000] Root IRQ handler: gic_handle_irq
> > > > > > vm1 | [ 0.000000] GICv3: 16 PPIs implemented
> > > > > > vm1 | [ 0.000000] GICv3: CPU0: found redistributor 0 region
> > > > > > 0:0x0000000050880000
> > > > > > vm1 | [ 0.000000] arch_timer: cp15 timer(s) running at 5.00MHz
> > > > > > (virt).
> > > > > > vm1 | [ 0.000000] clocksource: arch_sys_counter: mask:
> > > > > > 0xffffffffffffff max_cycles: 0x127350b88, max_idle_ns: 440795202120
> > > ns
> > > > > > vm1 | [ 0.000001] sched_clock: 56 bits at 5MHz, resolution
> > > 200ns,
> > > > > > wraps every 4398046511100ns
> > > > > > vm1 | [ 0.000638] Console: colour dummy device 80x25
> > > > > > vm1 | [ 0.000683] Calibrating delay loop (skipped), value
> > > > > calculated
> > > > > > using timer frequency.. 10.00 BogoMIPS (lpj=20000)
> > > > > > vm1 | [ 0.000697] pid_max: default: 32768 minimum: 301
> > > > > > vm1 | [ 0.000887] Mount-cache hash table entries: 1024
> > > (order: 1,
> > > > > > 8192 bytes, linear)
> > > > > > vm1 | [ 0.000899] Mountpoint-cache hash table entries: 1024
> > > > > (order:
> > > > > > 1, 8192 bytes, linear)
> > > > > > vm1 | [ 0.002629] rcu: Hierarchical SRCU implementation.
> > > > > > vm1 | [ 0.003552] smp: Bringing up secondary CPUs ...
> > > > > > vm1 | [ 0.017897] Detected VIPT I-cache on CPU1
> > > > > > vm1 | [ 0.017963] GICv3: CPU1: found redistributor 1 region
> > > > > > 0:0x00000000508a0000
> > > > > > vm1 | [ 0.018124] CPU1: Booted secondary processor
> > > 0x0000000001
> > > > > > [0x410fd034]
> > > > > > vm1 | [ 0.038864] Detected VIPT I-cache on CPU2
> > > > > > vm1 | [ 0.038925] GICv3: CPU2: found redistributor 100 region
> > > > > > 0:0x00000000508c0000
> > > > > > vm1 | [ 0.039068] CPU2: Booted secondary processor
> > > 0x0000000100
> > > > > > [0x410fd034]
> > > > > > vm1 | [ 0.059640] Detected VIPT I-cache on CPU3
> > > > > > vm1 | [ 0.059684] GICv3: CPU3: found redistributor 101 region
> > > > > > 0:0x00000000508e0000
> > > > > > vm1 | [ 0.059796] CPU3: Booted secondary processor
> > > 0x0000000101
> > > > > > [0x410fd034]
> > > > > > vm1 | [ 0.066434] smp: Brought up 1 node, 4 CPUs
> > > > > > vm1 | [ 0.066445] SMP: Total of 4 processors activated.
> > > > > > vm1 | [ 0.066450] CPU features: detected: 32-bit EL0 Support
> > > > > > vm1 | [ 0.066456] CPU features: detected: CRC32 instructions
> > > > > > vm1 | [ 0.076601] CPU: All CPU(s) started at EL1
> > > > > > vm1 | [ 0.076655] alternatives: patching kernel code
> > > > > > vm1 | [ 0.077714] devtmpfs: initialized
> > > > > > vm1 | [ 0.086718] clocksource: jiffies: mask: 0xffffffff
> > > > > max_cycles:
> > > > > > 0xffffffff, max_idle_ns: 7645041785100000 ns
> > > > > > vm1 | [ 0.086746] futex hash table entries: 1024 (order: 4,
> > > 65536
> > > > > > bytes, linear)
> > > > > > vm1 | [ 0.095444] pinctrl core: initialized pinctrl subsystem
> > > > > > vm1 | [ 0.096442] NET: Registered PF_NETLINK/PF_ROUTE protocol
> > > > > family
> > > > > > vm1 | [ 0.098184] DMA: preallocated 128 KiB GFP_KERNEL pool
> > > for
> > > > > > atomic allocations
> > > > > > vm1 | [ 0.098363] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA
> > > > > pool
> > > > > > for atomic allocations
> > > > > > vm1 | [ 0.098516] DMA: preallocated 128 KiB
> > > GFP_KERNEL|GFP_DMA32
> > > > > > pool for atomic allocations
> > > > > > vm1 | [ 0.098979] thermal_sys: Registered thermal governor
> > > > > > 'step_wise'
> > > > > > vm1 | [ 0.099686] hw-breakpoint: found 6 breakpoint and 4
> > > > > watchpoint
> > > > > > registers.
> > > > > > vm1 | [ 0.100036] ASID allocator initialised with 65536
> > > entries
> > > > > > vm1 | [ 0.100142] Serial: AMBA PL011 UART driver
> > > > > > vm1 | [ 0.101471] 12000.pl011_uart: ttyAMA0 at MMIO 0x12000
> > > (irq =
> > > > > > 14, base_baud = 0) is a PL011 rev3
> > > > > > vm1 | [ 0.101515] printk: console [ttyAMA0] enabled
> > > > > > vm1 | [ 0.108150] HugeTLB registered 1.00 GiB page size,
> > > > > > pre-allocated 0 pages
> > > > > > vm1 | [ 0.108163] HugeTLB registered 32.0 MiB page size,
> > > > > > pre-allocated 0 pages
> > > > > > vm1 | [ 0.108168] HugeTLB registered 2.00 MiB page size,
> > > > > > pre-allocated 0 pages
> > > > > > vm1 | [ 0.108175] HugeTLB registered 64.0 KiB page size,
> > > > > > pre-allocated 0 pages
> > > > > > vm1 | [ 0.110016] vgaarb: loaded
> > > > > > vm1 | [ 0.110204] SCSI subsystem initialized
> > > > > > vm1 | [ 0.110378] usbcore: registered new interface driver
> > > usbfs
> > > > > > vm1 | [ 0.110412] usbcore: registered new interface driver hub
> > > > > > vm1 | [ 0.110446] usbcore: registered new device driver usb
> > > > > > vm1 | [ 0.110742] pps_core: LinuxPPS API ver. 1 registered
> > > > > > vm1 | [ 0.110746] pps_core: Software ver. 5.3.6 - Copyright
> > > > > > 2005-2007 Rodolfo Giometti <giometti@linux.it>
> > > > > > vm1 | [ 0.110761] PTP clock support registered
> > > > > > vm1 | [ 0.111890] clocksource: Switched to clocksource
> > > > > > arch_sys_counter
> > > > > > vm1 | [ 0.120290] NET: Registered PF_INET protocol family
> > > > > > vm1 | [ 0.120433] IP idents hash table entries: 8192 (order:
> > > 4,
> > > > > > 65536 bytes, linear)
> > > > > > vm1 | [ 0.120940] tcp_listen_portaddr_hash hash table
> > > entries: 256
> > > > > > (order: 0, 4096 bytes, linear)
> > > > > > vm1 | [ 0.120958] Table-perturb hash table entries: 65536
> > > (order:
> > > > > 6,
> > > > > > 262144 bytes, linear)
> > > > > > vm1 | [ 0.120970] TCP established hash table entries: 4096
> > > (order:
> > > > > > 3, 32768 bytes, linear)
> > > > > > vm1 | [ 0.121009] TCP bind hash table entries: 4096 (order: 4,
> > > > > 65536
> > > > > > bytes, linear)
> > > > > > vm1 | [ 0.121084] TCP: Hash tables configured (established
> > > 4096
> > > > > bind
> > > > > > 4096)
> > > > > > vm1 | [ 0.121170] UDP hash table entries: 256 (order: 1, 8192
> > > > > bytes,
> > > > > > linear)
> > > > > > vm1 | [ 0.121192] UDP-Lite hash table entries: 256 (order: 1,
> > > 8192
> > > > > > bytes, linear)
> > > > > > vm1 | [ 0.121352] NET: Registered PF_UNIX/PF_LOCAL protocol
> > > family
> > > > > > vm1 | [ 0.122014] RPC: Registered named UNIX socket transport
> > > > > module.
> > > > > > vm1 | [ 0.122020] RPC: Registered udp transport module.
> > > > > > vm1 | [ 0.122023] RPC: Registered tcp transport module.
> > > > > > vm1 | [ 0.122025] RPC: Registered tcp NFSv4.1 backchannel
> > > > > transport
> > > > > > module.
> > > > > > vm1 | [ 0.122035] PCI: CLS 0 bytes, default 64
> > > > > > vm1 | [ 0.122356] Unpacking initramfs...
> > > > > > vm1 | [ 1.620548] Freeing initrd memory: 25676K
> > > > > > vm1 | [ 1.625720] workingset: timestamp_bits=62 max_order=17
> > > > > > bucket_order=0
> > > > > > vm1 | [ 1.626779] fuse: init (API version 7.34)
> > > > > > vm1 | [ 1.626982] NET: Registered PF_ALG protocol family
> > > > > > vm1 | [ 1.627045] Block layer SCSI generic (bsg) driver
> > > version
> > > > > 0.4
> > > > > > loaded (major 248)
> > > > > > vm1 | [ 1.627052] io scheduler mq-deadline registered
> > > > > > vm1 | [ 1.627056] io scheduler kyber registered
> > > > > > vm1 | [ 1.631965] vcan: Virtual CAN interface driver
> > > > > > vm1 | [ 1.631980] slcan: serial line CAN interface driver
> > > > > > vm1 | [ 1.631982] slcan: 10 dynamic interface channels.
> > > > > > vm1 | [ 1.631990] CAN device driver interface
> > > > > > vm1 | [ 1.632058] e100: Intel(R) PRO/100 Network Driver
> > > > > > vm1 | [ 1.632061] e100: Copyright(c) 1999-2006 Intel
> > > Corporation
> > > > > > vm1 | [ 1.632098] e1000: Intel(R) PRO/1000 Network Driver
> > > > > > vm1 | [ 1.632102] e1000: Copyright (c) 1999-2006 Intel
> > > > > Corporation.
> > > > > > vm1 | [ 1.632138] e1000e: Intel(R) PRO/1000 Network Driver
> > > > > > vm1 | [ 1.632141] e1000e: Copyright(c) 1999 - 2015 Intel
> > > > > Corporation.
> > > > > > vm1 | [ 1.632171] igb: Intel(R) Gigabit Ethernet Network
> > > Driver
> > > > > > vm1 | [ 1.632176] igb: Copyright (c) 2007-2014 Intel
> > > Corporation.
> > > > > > vm1 | [ 1.632523] ehci_hcd: USB 2.0 'Enhanced' Host Controller
> > > > > > (EHCI) Driver
> > > > > > vm1 | [ 1.632531] ehci-pci: EHCI PCI platform driver
> > > > > > vm1 | [ 1.632753] usbcore: registered new interface driver uas
> > > > > > vm1 | [ 1.632791] usbcore: registered new interface driver
> > > > > > usb-storage
> > > > > > vm1 | [ 1.633272] i2c_dev: i2c /dev entries driver
> > > > > > vm1 | [ 1.633467] sdhci: Secure Digital Host Controller
> > > Interface
> > > > > > driver
> > > > > > vm1 | [ 1.633470] sdhci: Copyright(c) Pierre Ossman
> > > > > > vm1 | [ 1.633472] sdhci-pltfm: SDHCI platform and OF driver
> > > helper
> > > > > > vm1 | [ 1.633661] usbcore: registered new interface driver
> > > usbhid
> > > > > > vm1 | [ 1.633666] usbhid: USB HID core driver
> > > > > > vm1 | [ 1.634177] NET: Registered PF_INET6 protocol family
> > > > > > vm1 | [ 1.635090] Segment Routing with IPv6
> > > > > > vm1 | [ 1.635128] In-situ OAM (IOAM) with IPv6
> > > > > > vm1 | [ 1.635182] sit: IPv6, IPv4 and MPLS over IPv4 tunneling
> > > > > driver
> > > > > > vm1 | [ 1.635654] NET: Registered PF_PACKET protocol family
> > > > > > vm1 | [ 1.635859] can: controller area network core
> > > > > > vm1 | [ 1.635895] NET: Registered PF_CAN protocol family
> > > > > > vm1 | [ 1.635900] can: raw protocol
> > > > > > vm1 | [ 1.635906] can: broadcast manager protocol
> > > > > > vm1 | [ 1.635933] can: netlink gateway - max_hops=1
> > > > > > vm1 | [ 1.635965] 8021q: 802.1Q VLAN Support v1.8
> > > > > > vm1 | [ 1.636238] printk: console [ttyAMA0]: printing thread
> > > > > started
> > > > > > vm1 | [ 1.707129] uart-pl011 12000.pl011_uart: no DMA platform
> > > > > data
> > > > > > vm1 | [ 1.753286] Freeing unused kernel memory: 1344K
> > > > > >
> > > > > >
> > > > > > On Thu, Feb 20, 2025 at 9:48 PM Philipp Eppelt <
> > > > > > philipp.eppelt@kernkonzept.com> wrote:
> > > > > >
> > > > > > > Hi Qiang,
> > > > > > >
> > > > > > > I see these lines in the linux boot output, which make me wonder,
> > > if
> > > > > the
> > > > > > > VM has
> > > > > > > enough RAM:
> > > > > > >
> > > > > > > > vm1 | [ 0.000000] cma: Failed to reserve 256 MiB
> > > > > > > > [...]
> > > > > > > > vm1 | [ 0.112053] Unpacking initramfs...
> > > > > > > > vm1 | [ 0.946302] Initramfs unpacking failed: write error
> > > > > > > > vm1 | [ 0.959998] Freeing initrd memory: 25676K
> > > > > > >
> > > > > > > Please increase the amount of RAM for the VM. Currently, your
> > > > > uvmm-io.ned
> > > > > > > specifies 128MB. Please try 512MB or more.
> > > > > > >
> > > > > > > Cheers,
> > > > > > > Philipp
> > > > > > >
> > > > > > >
> > > > > > > Am 20.02.25 um 12:20 PM schrieb qiang xu:
> > > > > > > > Hi Adam，
> > > > > > > >
> > > > > > > > I would like to sincerely thank you again for your help.
> > > According to
> > > > > > > what you
> > > > > > > > said, I have added the UART to the device tree, and I can now
> > > see the
> > > > > > > system
> > > > > > > > startup prints. However, it seems that the kernel cannot find the
> > > > > > > rootfs. What
> > > > > > > > should I configure in L4? Have I missed any configurations?
> > > > > > > >
> > > > > > > > fatload mmc 0 0x8000e000 l4re_uvmm-io.uimage
> > > > > > > > 46235855 bytes read in 1971 ms (22.4 MiB/s)
> > > > > > > > => fatload mmc 0 0x80000000 s32g2xxa-evb.dtb1
> > > > > > > > 54149 bytes read in 17 ms (3 MiB/s)
> > > > > > > > => bootm 0x8000e000 - 0x80000000
> > > > > > > > ## Booting kernel from Legacy Image at 8000e000 ...
> > > > > > > > Image Name: L4 Image #26
> > > > > > > > Image Type: AArch64 Linux Kernel Image (uncompressed)
> > > > > > > > Data Size: 46235791 Bytes = 44.1 MiB
> > > > > > > > Load Address: 91000000
> > > > > > > > Entry Point: 91000000
> > > > > > > > Verifying Checksum ... OK
> > > > > > > > ## Flattened Device Tree blob at 80000000
> > > > > > > > Booting using the fdt blob at 0x80000000
> > > > > > > > Loading Kernel Image
> > > > > > > > Using Device Tree in place at 0000000080000000, end
> > > > > 0000000080010384
> > > > > > > > fixup: pfe0 set to 00:01:be:be:ef:11
> > > > > > > > fixup: pfe1 set to 00:01:be:be:ef:22
> > > > > > > > fixup: pfe2 set to 00:01:be:be:ef:33
> > > > > > > >
> > > > > > > > Starting kernel ...
> > > > > > > >
> > > > > > > >
> > > > > > > > L4 Bootstrapper
> > > > > > > > Build: #26 Thu Feb 20 19:07:32 CST 2025, 11.4.0
> > > > > > > > RAM: 0000000080000000 - 00000000ffffffff: 2097152kB
> > > > > > > > RAM: 0000000880000000 - 00000008dfffffff: 1572864kB
> > > > > > > > Total RAM: 3584MB
> > > > > > > > Scanning fiasco
> > > > > > > > Scanning sigma0
> > > > > > > > Scanning moe
> > > > > > > > Moving up to 15 modules behind 81300000
> > > > > > > > moving module 00 { 9101f000-910e5fe7 } -> { 8600a000-860d0fe7
> > > }
> > > > > > > [815080]
> > > > > > > > moving module 01 { 910e6000-910ebcd7 } -> { 860d1000-860d6cd7
> > > }
> > > > > > > [23768]
> > > > > > > > moving module 02 { 910ec000-9111e6cf } -> { 860d7000-861096cf
> > > }
> > > > > > > [206544]
> > > > > > > > moving module 03 { 9111f000-9121258f } -> { 8610a000-861fd58f
> > > }
> > > > > > > [996752]
> > > > > > > > moving module 04 { 91213000-9122e537 } -> { 861fe000-86219537
> > > }
> > > > > > > [111928]
> > > > > > > > moving module 05 { 9122f000-912b7aa7 } -> { 8621a000-862a2aa7
> > > }
> > > > > > > [559784]
> > > > > > > > moving module 06 { 912b8000-912c5384 } -> { 862a3000-862b0384
> > > }
> > > > > > > [54149]
> > > > > > > > moving module 07 { 912c6000-92bd9a52 } -> { 862b1000-87bc4a52
> > > }
> > > > > > > [26294867]
> > > > > > > > moving module 08 { 92bda000-92bdb218 } -> { 87bc5000-87bc6218
> > > }
> > > > > [4633]
> > > > > > > > moving module 09 { 92bdc000-92bdc29a } -> { 87bc7000-87bc729a
> > > }
> > > > > [667]
> > > > > > > > moving module 10 { 92bdd000-939bd807 } -> { 87bc8000-889a8807
> > > }
> > > > > > > [14551048]
> > > > > > > > moving module 11 { 939be000-93a03faf } -> { 889a9000-889eefaf
> > > }
> > > > > > > [286640]
> > > > > > > > moving module 12 { 93a04000-93c16a87 } -> { 889ef000-88c01a87
> > > }
> > > > > > > [2173576]
> > > > > > > > moving module 13 { 93c17000-93c171f7 } -> { 88c02000-88c021f7
> > > }
> > > > > [504]
> > > > > > > > moving module 14 { 93c18000-93c1808e } -> { 88c03000-88c0308e
> > > }
> > > > > [143]
> > > > > > > > Loading fiasco
> > > > > > > > found node 0 kernel info page (via ELF) at 0x80203000
> > > > > > > > Loading sigma0
> > > > > > > > Loading moe
> > > > > > > > found node 0 kernel options (via ELF) at 0x80204000
> > > > > > > > Sigma0 config node: 0 ip:860003f4
> > > > > > > > Roottask config node: 0 ip:80841904
> > > > > > > > Regions of list 'regions'
> > > > > > > > [ 34000000, 3407ffff] { 80000} Arch pfebufs@34000000
> > > > > > > > [ 34080000, 3409ffff] { 20000} Arch pfebufs@34080000
> > > > > > > > [ 80000000, 8000dfff] { e000} Root dtb
> > > > > > > > [ 8000e000, 8000efff] { 1000} Root mbi_rt
> > > > > > > > [ 80201000, 80205847] { 4848} Kern fiasco
> > > > > > > > [ 80400000, 8061dfff] { 21e000} Kern fiasco
> > > > > > > > [ 80840000, 8087d817] { 3d818} Root moe
> > > > > > > > [ 83200000, 835dffff] { 3e0000} Arch pfebufs@83200000
> > > > > > > > [ 835e0000, 835fffff] { 20000} Arch pfebufs@835e0000
> > > > > > > > [ 84000000, 843fffff] { 400000} Arch shm@84000000
> > > > > > > > [ 85000000, 85000fff] { 1000} Arch ddr@85000000
> > > > > > > > [ 86000000, 8600946f] { 9470} Sigma0 sigma0
> > > > > > > > [ 8610a000, 88c0308e] { 2af908f} Root Module
> > > > > > > > [ 91000158, 91000187] { 30} Root cpu_boot
> > > > > > > > [ 9101e1d0, 9101ecdc] { b0d} Boot modinfo
> > > > > > > > [ c0000000, c03fffff] { 400000} Arch shm@c0000000
> > > > > > > > [ c0400000, c07fffff] { 400000} Arch shm@c0400000
> > > > > > > > [ d0000000, d000007f] { 80} Arch shm@d0000000
> > > > > > > > [ d0000080, d00000ff] { 80} Arch shm@d0000080
> > > > > > > > [ ff800000, ff9fffff] { 200000} Arch atf@ff800000
> > > > > > > > Starting kernel fiasco at 80201190
> > > > > > > > Hello from Startup::stage2
> > > > > > > > Reserved 216 MiB as kernel memory.
> > > > > > > > Number of IRQs available at this GIC: 576
> > > > > > > > CPU0: GIC Redistributor at ffff00480000 for 0x0
> > > > > > > > Detecting PSCI ...
> > > > > > > > Detected PSCI v1.1
> > > > > > > > PSCI: CPU_SUSPEND format original v0.2, does not support
> > > OS-initiated
> > > > > > > mode
> > > > > > > > PSCI: TOS: Not present or not required.
> > > > > > > > FPU: Initialize
> > > > > > > > ARM generic timer: freq=5000000 interval=5000 cnt=339090240
> > > > > > > > SERIAL ESC: allocated IRQ 114 for serial uart
> > > > > > > > Not using serial hack in slow timer handler.
> > > > > > > > Welcome to the L4Re Microkernel!
> > > > > > > > L4Re Microkernel on arm-64
> > > > > > > > Rev: unknown compiled with gcc 11.4.0 for NXP S32G []
> > > > > > > > Build: #12 Tue Feb 18 14:17:13 CST 2025
> > > > > > > >
> > > > > > > > Cache config: ON
> > > > > > > > CPU1: GIC Redistributor at ffff004a0000 for 0x1
> > > > > > > > CPU1: ID_PFR[01]: 01002222 00000000 ID_[DA]FR0: 10305106
> > > 00000000
> > > > > > > > ID_MMFR[04]: 00001122 00000000 00000000 00000000
> > > > > > > > CPU2: GIC Redistributor at ffff004c0000 for 0x100
> > > > > > > > CPU2: ID_PFR[01]: 01002222 00000000 ID_[DA]FR0: 10305106
> > > 00000000
> > > > > > > > ID_MMFR[04]: 00001122 00000000 00000000 00000000
> > > > > > > > CPU3: GIC Redistributor at ffff004e0000 for 0x101
> > > > > > > > Calibrating timer loop...
> > > > > > > > CPU3: ID_PFR[01]: 01002222 00000000 ID_[DA]FR0: 10305106
> > > 00000000
> > > > > > > > ID_MMFR[04]: 00001122 00000000 00000000 00000000
> > > > > > > > Timer calibration done.
> > > > > > > > MDB: use page size: 30
> > > > > > > > MDB: use page size: 21
> > > > > > > > MDB: use page size: 12
> > > > > > > > SIGMA0: Hello!
> > > > > > > > KIP @ 80203000
> > > > > > > > allocated 4KB for maintenance structures
> > > > > > > > SIGMA0: Dump of all resource maps
> > > > > > > > RAM:------------------------
> > > > > > > > [4:---:80000000;8000dfff]
> > > > > > > > [4:RWX:8000e000;8000efff]
> > > > > > > > [0:RWX:8000f000;80200fff]
> > > > > > > > [0:RWX:80206000;803fffff]
> > > > > > > > [0:RWX:8061e000;8083ffff]
> > > > > > > > [4:RWX:80840000;8087dfff]
> > > > > > > > [0:RWX:8087e000;831fffff]
> > > > > > > > [0:RWX:83600000;83ffffff]
> > > > > > > > [0:RWX:84400000;84ffffff]
> > > > > > > > [0:RWX:85001000;85ffffff]
> > > > > > > > [0:RWX:8600a000;86109fff]
> > > > > > > > [4:RWX:8610a000;88c03fff]
> > > > > > > > [0:RWX:88c04000;90ffffff]
> > > > > > > > [4:---:91000000;91000fff]
> > > > > > > > [0:RWX:91001000;bfffffff]
> > > > > > > > [0:RWX:c0800000;cfffffff]
> > > > > > > > [0:RWX:d0001000;ff7fffff]
> > > > > > > > [0:RWX:ffa00000;ffffffff]
> > > > > > > > [0:RWX:880000000;8d27fffff]
> > > > > > > > IOMEM:----------------------
> > > > > > > > [0:RW-:0;7fffffff]
> > > > > > > > [0:RW-:83200000;835fffff]
> > > > > > > > [0:RW-:84000000;843fffff]
> > > > > > > > [0:RW-:85000000;85000fff]
> > > > > > > > [0:RW-:c0000000;c07fffff]
> > > > > > > > [0:RW-:d0000000;d0000fff]
> > > > > > > > [0:RW-:ff800000;ff9fffff]
> > > > > > > > [0:RW-:100000000;87fffffff]
> > > > > > > > [0:RW-:8e0000000;ffffffffffffffff]
> > > > > > > > MOE: Hello world
> > > > > > > > MOE: found 3383848 KByte free memory
> > > > > > > > MOE: found RAM from 8000f000 to 8d2800000
> > > > > > > > MOE: allocated 34088 KByte for the page array @0x8087e000
> > > > > > > > MOE: virtual user address space [0-ffffffffff]
> > > > > > > > MOE: cmdline: moe rom/uvmm-io.ned
> > > > > > > > MOE: rom name space cap -> [C:103000]
> > > > > > > > MOE: rwfs name space cap -> [C:105000]
> > > > > > > > ROMFS: [8610a000-861fd590] [C:107000] uvmm
> > > > > > > > ROMFS: [861fe000-86219538] [C:109000] l4re
> > > > > > > > ROMFS: [8621a000-862a2aa8] [C:10b000] ned
> > > > > > > > ROMFS: [862a3000-862b0385] [C:10d000] s32g2xxa-evb.dtb1
> > > > > > > > ROMFS: [862b1000-87bc4a53] [C:10f000]
> > > > > > > fsl-image-dom0less-s32g274aevb.cpio.gz
> > > > > > > > ROMFS: [87bc5000-87bc6219] [C:111000] vmm.lua
> > > > > > > > ROMFS: [87bc7000-87bc729b] [C:113000] uvmm-io.ned
> > > > > > > > ROMFS: [87bc8000-889a8808] [C:115000] Image
> > > > > > > > ROMFS: [889a9000-889eefb0] [C:117000] cons
> > > > > > > > ROMFS: [889ef000-88c01a88] [C:119000] io
> > > > > > > > ROMFS: [88c02000-88c021f8] [C:11b000] io.cfg
> > > > > > > > ROMFS: [88c03000-88c0308f] [C:11d000] vm_hw.vbus
> > > > > > > > ROMFS: [80000000-8000e000] [C:11f000] .fdt
> > > > > > > > MOE: Starting: rom/ned rom/uvmm-io.ned
> > > > > > > > MOE: loading 'rom/ned'
> > > > > > > > Ned says: Hi World!
> > > > > > > > Ned: loading file: 'rom/uvmm-io.ned'
> > > > > > > > Console Server
> > > > > > > > cons>
> > > > > > > > Created vcon channel: io [420010]
> > > > > > > > cons>
> > > > > > > > io | Io service
> > > > > > > > io | Verboseness level: 7
> > > > > > > > io | unused physical memory space:
> > > > > > > >
> > > > > > > > Created vcon channel: vm1 [421010]
> > > > > > > > cons>
> > > > > > > > io | [00000000000000-00000033ffffff]
> > > > > > > >
> > > > > > > > Created vcon channel: mon1 [422010]
> > > > > > > > cons>
> > > > > > > > io | [000000340a0000-0000007fffffff]
> > > > > > > > io | [00000100000000-0000087fffffff]
> > > > > > > > io | [000008e0000000-ffffffffffffffff]
> > > > > > > > io | no 'iommu' capability found, using CPU-phys for DMA
> > > > > > > > io | Loading: config 'rom/io.cfg'
> > > > > > > > io | Loading: config 'rom/vm_hw.vbus'
> > > > > > > > io | Add IRQ resources to vbus: IRQ
> > > > > > > [00000000000007-00000000000007 1]
> > > > > > > > level high (align=0 flags=3000)
> > > > > > > > io | Add IRQ resources to vbus: IRQ
> > > > > > > [00000000000079-00000000000079 1]
> > > > > > > > raising edge (align=0 flags=10)
> > > > > > > > io | vm_hw: [N12_GLOBAL__N_112Virtual_sbusE]
> > > > > > > > io | Resources: ==== start ====
> > > > > > > > io | Resources: ===== end =====
> > > > > > > > io | L4ICU: [N2Vi6Sw_icuE]
> > > > > > > > io | Resources: ==== start ====
> > > > > > > > io | Resources: ===== end =====
> > > > > > > > io | PMU: [N2Vi9Proxy_devE]
> > > > > > > > io | Resources: ==== start ====
> > > > > > > > io | IRQ [00000000000007-00000000000007 1] level
> > > high
> > > > > > > (align=0
> > > > > > > > flags=300001)
> > > > > > > > io | Resources: ===== end =====
> > > > > > > > io | UART0: [N2Vi9Proxy_devE]
> > > > > > > > io | Resources: ==== start ====
> > > > > > > > io | IRQ [00000000000079-00000000000079 1] raising
> > > edge
> > > > > > > (align=0
> > > > > > > > flags=100001)
> > > > > > > > io | IOMEM [00000000002000-00000000003000 1001] 32-bit
> > > > > > > non-pref
> > > > > > > > (align=1000 flags=300002)
> > > > > > > > io | Resources: ===== end =====
> > > > > > > > io | Real Hardware -----------------------------------
> > > > > > > > io | System Bus:
> > > > > > > > io | Resources: ==== start ====
> > > > > > > > io | DMADOM [00000000000000-00000000000000 1] (align=0
> > > > > flags=6)
> > > > > > > > io | Resources: ===== end =====
> > > > > > > > io | pmu:
> > > > > > > > io | compatible= { "arm,armv8-pmuv3" }
> > > > > > > > io | Clients: ===== start ====
> > > > > > > > io | PMU: [N2Vi9Proxy_devE]
> > > > > > > > io | Clients: ===== end ====
> > > > > > > > io | Resources: ==== start ====
> > > > > > > > io | IRQ [00000000000007-00000000000007 1] level
> > > high
> > > > > > > (align=0
> > > > > > > > flags=300001)
> > > > > > > > io | Resources: ===== end =====
> > > > > > > > io | uart0:
> > > > > > > > io | compatible= { "arm,pl011" }
> > > > > > > > io | Clients: ===== start ====
> > > > > > > > io | UART0: [N2Vi9Proxy_devE]
> > > > > > > > io | Clients: ===== end ====
> > > > > > > > io | Resources: ==== start ====
> > > > > > > > io | IRQ [00000000000079-00000000000079 1] raising
> > > edge
> > > > > > > (align=0
> > > > > > > > flags=100001)
> > > > > > > > io | IOMEM [00000000002000-00000000003000 1001] 32-bit
> > > > > > > non-pref
> > > > > > > > (align=1000 flags=300002)
> > > > > > > > io | Resources: ===== end =====
> > > > > > > > io | warning: could not register control interface at cap
> > > > > > > 'platform_ctl'
> > > > > > > > io | Ready. Waiting for request.
> > > > > > > > io | vbus vm_hw does not support a global DMA domain
> > > > > > > > vm1 | VMM[main]: Hello out there.
> > > > > > > > vm1 | VMM[ram]: No memory nodes found, setting up default
> > > region
> > > > > > > > vm1 | Command line: console=ttyAMA0 earlyprintk=1
> > > rdinit=/init
> > > > > > > > vm1 | VMM[]: virtio_net@10000.l4vmm,virtiocap: capability
> > > net is
> > > > > > > invalid.
> > > > > > > > vm1 | VMM[vm]: Device creation for virtual device
> > > > > virtio_net@10000
> > > > > > > failed.
> > > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'pmu'
> > > IRQ
> > > > > 23.
> > > > > > > > vm1 | VMM[vm]: Device creation for pmu failed. Disabling
> > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'shm@c0000000'.reg[0]
> > > > > > >
> > > > > > > > (0xc0000000-0xc03fffff).
> > > > > > > > vm1 | VMM[vm]: Device creation for shm@c0000000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'shm@c0400000'.reg[0]
> > > > > > >
> > > > > > > > (0xc0400000-0xc07fffff).
> > > > > > > > vm1 | VMM[vm]: Device creation for shm@c0400000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'shm@d0000000'.reg[0]
> > > > > > >
> > > > > > > > (0xd0000000-0xd000007f).
> > > > > > > > vm1 | VMM[vm]: Device creation for shm@d0000000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'shm@d0000080'.reg[0]
> > > > > > >
> > > > > > > > (0xd0000080-0xd00000ff).
> > > > > > > > vm1 | VMM[vm]: Device creation for shm@d0000080 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'shm@84000000'.reg[0]
> > > > > > >
> > > > > > > > (0x84000000-0x843fffff).
> > > > > > > > vm1 | VMM[vm]: Device creation for shm@84000000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'pfebufs@34000000'.reg[0] (0x34000000-0x3407ffff).
> > > > > > > > vm1 | VMM[vm]: Device creation for pfebufs@34000000 failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'pfebufs@34080000'.reg[0] (0x34080000-0x3409ffff).
> > > > > > > > vm1 | VMM[vm]: Device creation for pfebufs@34080000 failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'pfebufs@83200000'.reg[0] (0x83200000-0x835dffff).
> > > > > > > > vm1 | VMM[vm]: Device creation for pfebufs@83200000 failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'pfebufs@835e0000'.reg[0] (0x835e0000-0x835fffff).
> > > > > > > > vm1 | VMM[vm]: Device creation for pfebufs@835e0000 failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'ddr@85000000'.reg[0]
> > > > > > >
> > > > > > > > (0x85000000-0x85000fff).
> > > > > > > > vm1 | VMM[vm]: Device creation for ddr@85000000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'scmi'
> > > IRQ
> > > > > 332.
> > > > > > > > vm1 | VMM[vm]: Device creation for scmi failed. Disabling
> > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'rtc@40060000'.reg[0]
> > > > > > >
> > > > > > > > (0x40060000-0x40060fff).
> > > > > > > > vm1 | VMM[vm]: Device creation for rtc@40060000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'syscon@4007c000'.reg[0] (0x4007c000-0x4007c0ff).
> > > > > > > > vm1 | VMM[vm]: Device creation for syscon@4007c000 failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'ddr_gpr@4007c600'.reg[0] (0x4007c600-0x4007c61f).
> > > > > > > > vm1 | VMM[vm]: Device creation for ddr_gpr@4007c600 failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'nvram@4009c000'.reg[0]
> > > > > > >
> > > > > > > > (0x4009c000-0x4009c00f).
> > > > > > > > vm1 | VMM[vm]: Device creation for nvram@4009c000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'siul2-
> > > > > > > > pinctrl@4009c240'.reg[0] (0x4009c240-0x4009c3.
> > > > > > > > vm1 | VMM[vm]: Device creation for siul2-pinctrl@4009c240
> > > > > failed.
> > > > > > > Disabling
> > > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'siul2-
> > > > > > > > gpio@4009d700'.reg[0] (0x4009d700-0x4009d70f).
> > > > > > > > vm1 | VMM[vm]: Device creation for siul2-gpio@4009d700
> > > failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'nvram@44010000'.reg[0]
> > > > > > >
> > > > > > > > (0x44010000-0x4401000f).
> > > > > > > > vm1 | VMM[vm]: Device creation for nvram@44010000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'ocotp@400a4000'.reg[0]
> > > > > > >
> > > > > > > > (0x400a4000-0x400a43ff).
> > > > > > > > vm1 | VMM[vm]: Device creation for ocotp@400a4000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'tmu@400a8000'.reg[0]
> > > > > > >
> > > > > > > > (0x400a8000-0x400aafff).
> > > > > > > > vm1 | VMM[vm]: Device creation for tmu@400a8000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'watchdog@4010c000'.reg[0] (0x4010c000-0x4010cfff).
> > > > > > > > vm1 | VMM[vm]: Device creation for watchdog@4010c000 failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'stm@4011c000'.reg[0]
> > > > > > >
> > > > > > > > (0x4011c000-0x4011efff).
> > > > > > > > vm1 | VMM[vm]: Device creation for stm@4011c000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'stm@40120000'.reg[0]
> > > > > > >
> > > > > > > > (0x40120000-0x40122fff).
> > > > > > > > vm1 | VMM[vm]: Device creation for stm@40120000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'spi@40134000'.reg[0]
> > > > > > >
> > > > > > > > (0x0-0x1fffffff).
> > > > > > > > vm1 | VMM[vm]: Device creation for spi@40134000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'dma-
> > > > > > > > controller@40144000'.reg[0] (0x40144000-0x40167.
> > > > > > > > vm1 | VMM[vm]: Device creation for dma-controller@40144000
> > > > > failed.
> > > > > > > Disabling
> > > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'pit@40188000'.reg[0]
> > > > > > >
> > > > > > > > (0x40188000-0x4018afff).
> > > > > > > > vm1 | VMM[vm]: Device creation for pit@40188000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'mscm@40198000'.reg[0]
> > > > > > >
> > > > > > > > (0x40198000-0x40198fff).
> > > > > > > > vm1 | VMM[vm]: Device creation for mscm@40198000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'flexcan@401b4000'.reg[0] (0x401b4000-0x401bdfff).
> > > > > > > > vm1 | VMM[vm]: Device creation for flexcan@401b4000 failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'serial@401c8000'.reg[0] (0x401c8000-0x401cafff).
> > > > > > > > vm1 | VMM[vm]: Device creation for serial@401c8000 failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'serial@401cc000'.reg[0] (0x401cc000-0x401cefff).
> > > > > > > > vm1 | VMM[vm]: Device creation for serial@401cc000 failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'spi@401d8000'.reg[0]
> > > > > > >
> > > > > > > > (0x401d8000-0x401d8fff).
> > > > > > > > vm1 | VMM[vm]: Device creation for spi@401d8000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'i2c@401e4000'.reg[0]
> > > > > > >
> > > > > > > > (0x401e4000-0x401e4fff).
> > > > > > > > vm1 | VMM[vm]: Device creation for i2c@401e4000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'i2c@401e8000'.reg[0]
> > > > > > >
> > > > > > > > (0x401e8000-0x401e8fff).
> > > > > > > > vm1 | VMM[vm]: Device creation for i2c@401e8000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'i2c@401ec000'.reg[0]
> > > > > > >
> > > > > > > > (0x401ec000-0x401ecfff).
> > > > > > > > vm1 | VMM[vm]: Device creation for i2c@401ec000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'pwm@401f4000'.reg[0]
> > > > > > >
> > > > > > > > (0x401f4000-0x401f4fff).
> > > > > > > > vm1 | VMM[vm]: Device creation for pwm@401f4000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'adc@401f8000'.reg[0]
> > > > > > >
> > > > > > > > (0x401f8000-0x401f8fff).
> > > > > > > > vm1 | VMM[vm]: Device creation for adc@401f8000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'watchdog@40200000'.reg[0] (0x40200000-0x40200fff).
> > > > > > > > vm1 | VMM[vm]: Device creation for watchdog@40200000 failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'watchdog@40204000'.reg[0] (0x40204000-0x40204fff).
> > > > > > > > vm1 | VMM[vm]: Device creation for watchdog@40204000 failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'watchdog@40208000'.reg[0] (0x40208000-0x40208fff).
> > > > > > > > vm1 | VMM[vm]: Device creation for watchdog@40208000 failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'mu0b@40210000'.reg[0]
> > > > > > >
> > > > > > > > (0x40210000-0x40210fff).
> > > > > > > > vm1 | VMM[vm]: Device creation for mu0b@40210000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'mu1b@40211000'.reg[0]
> > > > > > >
> > > > > > > > (0x40211000-0x40211fff).
> > > > > > > > vm1 | VMM[vm]: Device creation for mu1b@40211000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'mu2b@40212000'.reg[0]
> > > > > > >
> > > > > > > > (0x40212000-0x40212fff).
> > > > > > > > vm1 | VMM[vm]: Device creation for mu2b@40212000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'mu3b@40213000'.reg[0]
> > > > > > >
> > > > > > > > (0x40213000-0x40213fff).
> > > > > > > > vm1 | VMM[vm]: Device creation for mu3b@40213000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'stm@40228000'.reg[0]
> > > > > > >
> > > > > > > > (0x40228000-0x4022afff).
> > > > > > > > vm1 | VMM[vm]: Device creation for stm@40228000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'dma-
> > > > > > > > controller@40244000'.reg[0] (0x40244000-0x40267.
> > > > > > > > vm1 | VMM[vm]: Device creation for dma-controller@40244000
> > > > > failed.
> > > > > > > Disabling
> > > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'pit@40288000'.reg[0]
> > > > > > >
> > > > > > > > (0x40288000-0x4028afff).
> > > > > > > > vm1 | VMM[vm]: Device creation for pit@40288000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'flexcan@402a8000'.reg[0] (0x402a8000-0x402b1fff).
> > > > > > > > vm1 | VMM[vm]: Device creation for flexcan@402a8000 failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'flexcan@402b2000'.reg[0] (0x402b2000-0x402bbfff).
> > > > > > > > vm1 | VMM[vm]: Device creation for flexcan@402b2000 failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'serial@402bc000'.reg[0] (0x402bc000-0x402befff).
> > > > > > > > vm1 | VMM[vm]: Device creation for serial@402bc000 failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'spi@402d0000'.reg[0]
> > > > > > >
> > > > > > > > (0x402d0000-0x402d0fff).
> > > > > > > > vm1 | VMM[vm]: Device creation for spi@402d0000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'i2c@402dc000'.reg[0]
> > > > > > >
> > > > > > > > (0x402dc000-0x402dcfff).
> > > > > > > > vm1 | VMM[vm]: Device creation for i2c@402dc000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'pwm@402e4000'.reg[0]
> > > > > > >
> > > > > > > > (0x402e4000-0x402e4fff).
> > > > > > > > vm1 | VMM[vm]: Device creation for pwm@402e4000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'adc@402e8000'.reg[0]
> > > > > > >
> > > > > > > > (0x402e8000-0x402e8fff).
> > > > > > > > vm1 | VMM[vm]: Device creation for adc@402e8000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'mmc@402f0000'.reg[0]
> > > > > > >
> > > > > > > > (0x402f0000-0x402f0fff).
> > > > > > > > vm1 | VMM[vm]: Device creation for mmc@402f0000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'fccu@4030c000'.reg[0]
> > > > > > >
> > > > > > > > (0x4030c000-0x4030efff).
> > > > > > > > vm1 | VMM[vm]: Device creation for fccu@4030c000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'ethernet@4033c000'.reg[0] (0x4033c000-0x4033dfff).
> > > > > > > > vm1 | VMM[vm]: Device creation for ethernet@4033c000 failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'ddr_errata@403c0000'.reg[0] (0x403c0000-0x403c00ff).
> > > > > > > > vm1 | VMM[vm]: Device creation for ddr_errata@403c0000
> > > failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'ddr-
> > > > > > > > perf@403e0000'.reg[0] (0x403e0000-0x403e00ff).
> > > > > > > > vm1 | VMM[vm]: Device creation for ddr-perf@403e0000 failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'pcie@40400000'.reg[0]
> > > > > > >
> > > > > > > > (0x40400000-0x40400fff).
> > > > > > > > vm1 | VMM[vm]: Device creation for pcie@40400000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'serdes@40480000'.reg[0] (0x40480000-0x40480107).
> > > > > > > > vm1 | VMM[vm]: Device creation for serdes@40480000 failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'pcie@44100000'.reg[0]
> > > > > > >
> > > > > > > > (0x44100000-0x44100fff).
> > > > > > > > vm1 | VMM[vm]: Device creation for pcie@44100000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'serdes@44180000'.reg[0] (0x44180000-0x44180107).
> > > > > > > > vm1 | VMM[vm]: Device creation for serdes@44180000 failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'pfe@46000000'.reg[0]
> > > > > > >
> > > > > > > > (0x46000000-0x46ffffff).
> > > > > > > > vm1 | VMM[vm]: Device creation for pfe@46000000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'llce_dte_sram@43000000'.reg[0] (0x43000000-0x43001f.
> > > > > > > > vm1 | VMM[vm]: Device creation for llce_dte_sram@43000000
> > > > > failed.
> > > > > > > Disabling
> > > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'llce_ppe_rx_sram@43100000'.reg[0] (0x43100000-0x431.
> > > > > > > > vm1 | VMM[vm]: Device creation for llce_ppe_rx_sram@43100000
> > > > > > > failed.
> > > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'llce_ppe_tx_sram@43200000'.reg[0] (0x43200000-0x432.
> > > > > > > > vm1 | VMM[vm]: Device creation for llce_ppe_tx_sram@43200000
> > > > > > > failed.
> > > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'llce_frpe_sram@43300000'.reg[0] (0x43300000-0x4330f.
> > > > > > > > vm1 | VMM[vm]: Device creation for llce_frpe_sram@43300000
> > > > > failed.
> > > > > > > Disabling
> > > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'llce_shmem@43800000'.reg[0] (0x43800000-0x4384ffff).
> > > > > > > > vm1 | VMM[vm]: Device creation for llce_shmem@43800000
> > > failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'llce@43a00000'.reg[0]
> > > > > > >
> > > > > > > > (0x43ff8000-0x43ffbfff).
> > > > > > > > vm1 | VMM[vm]: Device creation for llce@43a00000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > > > > 'usbmisc@44064200'.reg[0] (0x44064200-0x440643ff).
> > > > > > > > vm1 | VMM[vm]: Device creation for usbmisc@44064200 failed.
> > > > > > > Disabling device.
> > > > > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for
> > > > > 'usb@44064000'.reg[0]
> > > > > > >
> > > > > > > > (0x44064000-0x440641ff).
> > > > > > > > vm1 | VMM[vm]: Device creation for usb@44064000 failed.
> > > > > Disabling
> > > > > > > device.
> > > > > > > > vm1 | VMM[ram]: Cleaning caches for device tree
> > > [9ff2000-9fff728]
> > > > > > > ([90df2000])
> > > > > > > > io | new iomem region: p=00000000000000 v=00000000400000
> > > > > s=400000
> > > > > > > (bmb=0x39bc0)
> > > > > > > > io | map mem: p=00000000002000 v=00000000402000 s=2000
> > > uncached:
> > > > > > > done(0)
> > > > > > > > vm1 | VMM[]: Starting Cpu0 @ 0x88e00000 in 64Bit mode
> > > (handler @
> > > > > > > 1078e08,
> > > > > > > > stack: 801ffba0, task: 420000, )
> > > > > > > > vm1 | ffffffc0080202c4: mrs r0, S3_1_C11_C0_2 (hsr=62346c01)
> > > > > > > > vm1 | VMM[]: Starting Cpu1 @ 0x896e7254 in 64Bit mode
> > > (handler @
> > > > > > > 1078e08,
> > > > > > > > stack: 400f20, task: 420000, mp)
> > > > > > > > vm1 | ffffffc0080202c4: mrs r0, S3_1_C11_C0_2 (hsr=62346c01)
> > > > > > > > vm1 | VMM[]: Starting Cpu2 @ 0x896e7254 in 64Bit mode
> > > (handler @
> > > > > > > 1078e08,
> > > > > > > > stack: 5fff20, task: 420000, mp)
> > > > > > > > vm1 | ffffffc0080202c4: mrs r0, S3_1_C11_C0_2 (hsr=62346c01)
> > > > > > > > vm1 | VMM[]: Starting Cpu3 @ 0x896e7254 in 64Bit mode
> > > (handler @
> > > > > > > 1078e08,
> > > > > > > > stack: 7fef20, task: 420000, mp)
> > > > > > > > vm1 | ffffffc0080202c4: mrs r0, S3_1_C11_C0_2 (hsr=62346c01)
> > > > > > > > vm1 | [ 0.000000] Booting Linux on physical CPU
> > > 0x0000000000
> > > > > > > [0x410fd034]
> > > > > > > > vm1 | [ 0.000000] Linux version
> > > 5.15.119-rt65+ge18f05316cd9
> > > > > > > (oe-user@oe-
> > > > > > > > host) (aarch64-fsl-linux-gcc (3
> > > > > > > > vm1 | [ 0.000000] Machine model: NXP S32G2XXX-EVB
> > > > > > > > vm1 | [ 0.000000] Zone ranges:
> > > > > > > > vm1 | [ 0.000000] DMA [mem
> > > > > > > 0x0000000088e00000-0x0000000090dfffff]
> > > > > > > > vm1 | [ 0.000000] DMA32 empty
> > > > > > > > vm1 | [ 0.000000] Normal empty
> > > > > > > > vm1 | [ 0.000000] Movable zone start for each node
> > > > > > > > vm1 | [ 0.000000] Early memory node ranges
> > > > > > > > vm1 | [ 0.000000] node 0: [mem
> > > > > > > 0x0000000088e00000-0x0000000090dfffff]
> > > > > > > > vm1 | [ 0.000000] Initmem setup node 0 [mem
> > > > > > > > 0x0000000088e00000-0x0000000090dfffff]
> > > > > > > > vm1 | [ 0.000000] On node 0, zone DMA: 3584 pages in
> > > > > unavailable
> > > > > > > ranges
> > > > > > > > vm1 | [ 0.000000] On node 0, zone DMA: 29184 pages in
> > > > > unavailable
> > > > > > > ranges
> > > > > > > > vm1 | [ 0.000000] cma: Failed to reserve 256 MiB
> > > > > > > > vm1 | [ 0.000000] psci: probing for conduit method from
> > > DT.
> > > > > > > > vm1 | [ 0.000000] psci: PSCIv1.0 detected in firmware.
> > > > > > > > vm1 | [ 0.000000] psci: Using standard PSCI v0.2 function
> > > IDs
> > > > > > > > vm1 | [ 0.000000] psci: Trusted OS migration not required
> > > > > > > > vm1 | [ 0.000000] psci: SMC Calling Convention v1.0
> > > > > > > > vm1 | [ 0.000000] percpu: Embedded 18 pages/cpu s34200
> > > r8192
> > > > > > > d31336 u73728
> > > > > > > > vm1 | [ 0.000000] pcpu-alloc: s34200 r8192 d31336 u73728
> > > > > > > alloc=18*4096
> > > > > > > > vm1 | [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
> > > > > > > > vm1 | [ 0.000000] Detected VIPT I-cache on CPU0
> > > > > > > > vm1 | [ 0.000000] CPU features: detected: GIC system
> > > register
> > > > > CPU
> > > > > > > interface
> > > > > > > > vm1 | [ 0.000000] CPU features: detected: ARM erratum
> > > 845719
> > > > > > > > vm1 | [ 0.000000] CPU features: detected: ARM errata
> > > 1165522,
> > > > > > > 1319367,
> > > > > > > > 1530923, or 1530924
> > > > > > > > vm1 | [ 0.000000] Built 1 zonelists, mobility grouping on.
> > > > > Total
> > > > > > > pages:
> > > > > > > > 32320
> > > > > > > > vm1 | [ 0.000000] Kernel command line: console=ttyAMA0
> > > > > > > earlyprintk=1
> > > > > > > > rdinit=/init
> > > > > > > > vm1 | [ 0.000000] Unknown kernel command line parameters
> > > > > > > "earlyprintk=1",
> > > > > > > > will be passed to user space.
> > > > > > > > vm1 | [ 0.000000] Dentry cache hash table entries: 16384
> > > > > (order:
> > > > > > > 5,
> > > > > > > > 131072 bytes, linear)
> > > > > > > > vm1 | [ 0.000000] Inode-cache hash table entries: 8192
> > > > > (order: 4,
> > > > > > > 65536
> > > > > > > > bytes, linear)
> > > > > > > > vm1 | [ 0.000000] mem auto-init: stack:off, heap
> > > alloc:off,
> > > > > heap
> > > > > > > free:off
> > > > > > > > vm1 | [ 0.000000] Memory: 83660K/131072K available (9088K
> > > > > kernel
> > > > > > > code,
> > > > > > > > 642K rwdata, 3036K rodata, 1344)
> > > > > > > > vm1 | [ 0.000000] rcu: Preemptible hierarchical RCU
> > > > > > > implementation.
> > > > > > > > vm1 | [ 0.000000] rcu: RCU event tracing is enabled.
> > > > > > > > vm1 | [ 0.000000] rcu: RCU restricting CPUs from
> > > NR_CPUS=8
> > > > > to
> > > > > > > nr_cpu_ids=4.
> > > > > > > > vm1 | [ 0.000000] Trampoline variant of Tasks RCU
> > > > > enabled.
> > > > > > > > vm1 | [ 0.000000] Tracing variant of Tasks RCU
> > > enabled.
> > > > > > > > vm1 | [ 0.000000] rcu: RCU calculated value of
> > > > > > > scheduler-enlistment delay
> > > > > > > > is 25 jiffies.
> > > > > > > > vm1 | [ 0.000000] rcu: Adjusting geometry for
> > > > > rcu_fanout_leaf=16,
> > > > > > > > nr_cpu_ids=4
> > > > > > > > vm1 | [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated
> > > > > irqs: 0
> > > > > > > > vm1 | [ 0.000000] GICv3: 988 SPIs implemented
> > > > > > > > vm1 | [ 0.000000] GICv3: 0 Extended SPIs implemented
> > > > > > > > vm1 | [ 0.000000] GICv3: Distributor has no Range Selector
> > > > > support
> > > > > > > > vm1 | [ 0.000000] Root IRQ handler: gic_handle_irq
> > > > > > > > vm1 | [ 0.000000] GICv3: 16 PPIs implemented
> > > > > > > > vm1 | [ 0.000000] GICv3: CPU0: found redistributor 0
> > > region
> > > > > > > > 0:0x0000000050880000
> > > > > > > > vm1 | [ 0.000000] arch_timer: cp15 timer(s) running at
> > > 5.00MHz
> > > > > > > (virt).
> > > > > > > > vm1 | [ 0.000000] clocksource: arch_sys_counter: mask:
> > > > > > > 0xffffffffffffff
> > > > > > > > max_cycles: 0x127350b88, max_is
> > > > > > > > vm1 | [ 0.000001] sched_clock: 56 bits at 5MHz, resolution
> > > > > 200ns,
> > > > > > > wraps
> > > > > > > > every 4398046511100ns
> > > > > > > > vm1 | [ 0.000647] Console: colour dummy device 80x25
> > > > > > > > vm1 | [ 0.000694] Calibrating delay loop (skipped), value
> > > > > > > calculated
> > > > > > > > using timer frequency.. 10.00 Bog)
> > > > > > > > vm1 | [ 0.000707] pid_max: default: 32768 minimum: 301
> > > > > > > > vm1 | [ 0.000892] Mount-cache hash table entries: 512
> > > (order:
> > > > > 0,
> > > > > > > 4096
> > > > > > > > bytes, linear)
> > > > > > > > vm1 | [ 0.000903] Mountpoint-cache hash table entries: 512
> > > > > > > (order: 0,
> > > > > > > > 4096 bytes, linear)
> > > > > > > > vm1 | [ 0.002655] rcu: Hierarchical SRCU implementation.
> > > > > > > > vm1 | [ 0.003586] smp: Bringing up secondary CPUs ...
> > > > > > > > vm1 | [ 0.017942] Detected VIPT I-cache on CPU1
> > > > > > > > vm1 | [ 0.018008] GICv3: CPU1: found redistributor 1
> > > region
> > > > > > > > 0:0x00000000508a0000
> > > > > > > > vm1 | [ 0.018171] CPU1: Booted secondary processor
> > > > > 0x0000000001
> > > > > > > [0x410fd034]
> > > > > > > > vm1 | [ 0.038911] Detected VIPT I-cache on CPU2
> > > > > > > > vm1 | [ 0.038970] GICv3: CPU2: found redistributor 100
> > > region
> > > > > > > > 0:0x00000000508c0000
> > > > > > > > vm1 | [ 0.039117] CPU2: Booted secondary processor
> > > > > 0x0000000100
> > > > > > > [0x410fd034]
> > > > > > > > vm1 | [ 0.059706] Detected VIPT I-cache on CPU3
> > > > > > > > vm1 | [ 0.059748] GICv3: CPU3: found redistributor 101
> > > region
> > > > > > > > 0:0x00000000508e0000
> > > > > > > > vm1 | [ 0.059865] CPU3: Booted secondary processor
> > > > > 0x0000000101
> > > > > > > [0x410fd034]
> > > > > > > > vm1 | [ 0.066499] smp: Brought up 1 node, 4 CPUs
> > > > > > > > vm1 | [ 0.066508] SMP: Total of 4 processors activated.
> > > > > > > > vm1 | [ 0.066514] CPU features: detected: 32-bit EL0
> > > Support
> > > > > > > > vm1 | [ 0.066519] CPU features: detected: CRC32
> > > instructions
> > > > > > > > vm1 | [ 0.076664] CPU: All CPU(s) started at EL1
> > > > > > > > vm1 | [ 0.076717] alternatives: patching kernel code
> > > > > > > > vm1 | [ 0.077658] devtmpfs: initialized
> > > > > > > > vm1 | [ 0.086658] clocksource: jiffies: mask: 0xffffffff
> > > > > > > max_cycles:
> > > > > > > > 0xffffffff, max_idle_ns: 76450417s
> > > > > > > > vm1 | [ 0.086684] futex hash table entries: 1024 (order:
> > > 4,
> > > > > 65536
> > > > > > > bytes,
> > > > > > > > linear)
> > > > > > > > vm1 | [ 0.086894] pinctrl core: initialized pinctrl
> > > subsystem
> > > > > > > > vm1 | [ 0.087761] NET: Registered PF_NETLINK/PF_ROUTE
> > > protocol
> > > > > > > family
> > > > > > > > vm1 | [ 0.088328] DMA: preallocated 128 KiB GFP_KERNEL
> > > pool
> > > > > for
> > > > > > > atomic
> > > > > > > > allocations
> > > > > > > > vm1 | [ 0.088376] DMA: preallocated 128 KiB
> > > GFP_KERNEL|GFP_DMA
> > > > > > > pool for
> > > > > > > > atomic allocations
> > > > > > > > vm1 | [ 0.088418] DMA: preallocated 128 KiB
> > > > > GFP_KERNEL|GFP_DMA32
> > > > > > > pool for
> > > > > > > > atomic allocations
> > > > > > > > vm1 | [ 0.088812] thermal_sys: Registered thermal governor
> > > > > > > 'step_wise'
> > > > > > > > vm1 | [ 0.089482] hw-breakpoint: found 6 breakpoint and 4
> > > > > > > watchpoint
> > > > > > > > registers.
> > > > > > > > vm1 | [ 0.089813] ASID allocator initialised with 65536
> > > > > entries
> > > > > > > > vm1 | [ 0.089902] Serial: AMBA PL011 UART driver
> > > > > > > > vm1 | [ 0.091205] 12000.pl011_uart: ttyAMA0 at MMIO
> > > 0x12000
> > > > > (irq
> > > > > > > = 14,
> > > > > > > > base_baud = 0) is a PL011 rev3
> > > > > > > > vm1 | [ 0.091249] printk: console [ttyAMA0] enabled
> > > > > > > > vm1 | [ 0.097882] HugeTLB registered 1.00 GiB page size,
> > > > > > > pre-allocated 0
> > > > > > > > pages
> > > > > > > > vm1 | [ 0.097896] HugeTLB registered 32.0 MiB page size,
> > > > > > > pre-allocated 0
> > > > > > > > pages
> > > > > > > > vm1 | [ 0.097902] HugeTLB registered 2.00 MiB page size,
> > > > > > > pre-allocated 0
> > > > > > > > pages
> > > > > > > > vm1 | [ 0.097908] HugeTLB registered 64.0 KiB page size,
> > > > > > > pre-allocated 0
> > > > > > > > pages
> > > > > > > > vm1 | [ 0.099874] vgaarb: loaded
> > > > > > > > vm1 | [ 0.100066] SCSI subsystem initialized
> > > > > > > > vm1 | [ 0.100236] usbcore: registered new interface driver
> > > > > usbfs
> > > > > > > > vm1 | [ 0.100269] usbcore: registered new interface
> > > driver hub
> > > > > > > > vm1 | [ 0.100298] usbcore: registered new device driver
> > > usb
> > > > > > > > vm1 | [ 0.100605] pps_core: LinuxPPS API ver. 1 registered
> > > > > > > > vm1 | [ 0.100609] pps_core: Software ver. 5.3.6 -
> > > Copyright
> > > > > > > 2005-2007
> > > > > > > > Rodolfo Giometti <giometti@linux>
> > > > > > > > vm1 | [ 0.100622] PTP clock support registered
> > > > > > > > vm1 | [ 0.101759] clocksource: Switched to clocksource
> > > > > > > arch_sys_counter
> > > > > > > > vm1 | [ 0.110198] NET: Registered PF_INET protocol family
> > > > > > > > vm1 | [ 0.110332] IP idents hash table entries: 2048
> > > (order:
> > > > > 2,
> > > > > > > 16384
> > > > > > > > bytes, linear)
> > > > > > > > vm1 | [ 0.110706] tcp_listen_portaddr_hash hash table
> > > entries:
> > > > > > > 256
> > > > > > > > (order: 0, 4096 bytes, linear)
> > > > > > > > vm1 | [ 0.110727] Table-perturb hash table entries: 65536
> > > > > (order:
> > > > > > > 6,
> > > > > > > > 262144 bytes, linear)
> > > > > > > > vm1 | [ 0.110737] TCP established hash table entries: 1024
> > > > > > > (order: 1,
> > > > > > > > 8192 bytes, linear)
> > > > > > > > vm1 | [ 0.110752] TCP bind hash table entries: 1024
> > > (order: 2,
> > > > > > > 16384
> > > > > > > > bytes, linear)
> > > > > > > > vm1 | [ 0.110775] TCP: Hash tables configured (established
> > > > > 1024
> > > > > > > bind 1024)
> > > > > > > > vm1 | [ 0.110860] UDP hash table entries: 256 (order: 1,
> > > 8192
> > > > > > > bytes, linear)
> > > > > > > > vm1 | [ 0.110882] UDP-Lite hash table entries: 256
> > > (order: 1,
> > > > > > > 8192 bytes,
> > > > > > > > linear)
> > > > > > > > vm1 | [ 0.111044] NET: Registered PF_UNIX/PF_LOCAL
> > > protocol
> > > > > family
> > > > > > > > vm1 | [ 0.111710] RPC: Registered named UNIX socket
> > > transport
> > > > > > > module.
> > > > > > > > vm1 | [ 0.111715] RPC: Registered udp transport module.
> > > > > > > > vm1 | [ 0.111718] RPC: Registered tcp transport module.
> > > > > > > > vm1 | [ 0.111721] RPC: Registered tcp NFSv4.1 backchannel
> > > > > > > transport module.
> > > > > > > > vm1 | [ 0.111731] PCI: CLS 0 bytes, default 64
> > > > > > > > vm1 | [ 0.112053] Unpacking initramfs...
> > > > > > > > vm1 | [ 0.946302] Initramfs unpacking failed: write error
> > > > > > > > vm1 | [ 0.959998] Freeing initrd memory: 25676K
> > > > > > > > vm1 | [ 0.962699] workingset: timestamp_bits=62
> > > max_order=15
> > > > > > > bucket_order=0
> > > > > > > > vm1 | [ 0.963739] fuse: init (API version 7.34)
> > > > > > > > vm1 | [ 0.963938] NET: Registered PF_ALG protocol family
> > > > > > > > vm1 | [ 0.964001] Block layer SCSI generic (bsg) driver
> > > > > version
> > > > > > > 0.4
> > > > > > > > loaded (major 248)
> > > > > > > > vm1 | [ 0.964008] io scheduler mq-deadline registered
> > > > > > > > vm1 | [ 0.964012] io scheduler kyber registered
> > > > > > > > vm1 | [ 0.968974] vcan: Virtual CAN interface driver
> > > > > > > > vm1 | [ 0.968989] slcan: serial line CAN interface driver
> > > > > > > > vm1 | [ 0.968992] slcan: 10 dynamic interface channels.
> > > > > > > > vm1 | [ 0.969000] CAN device driver interface
> > > > > > > > vm1 | [ 0.969065] e100: Intel(R) PRO/100 Network Driver
> > > > > > > > vm1 | [ 0.969069] e100: Copyright(c) 1999-2006 Intel
> > > > > Corporation
> > > > > > > > vm1 | [ 0.969104] e1000: Intel(R) PRO/1000 Network Driver
> > > > > > > > vm1 | [ 0.969108] e1000: Copyright (c) 1999-2006 Intel
> > > > > > > Corporation.
> > > > > > > > vm1 | [ 0.969144] e1000e: Intel(R) PRO/1000 Network Driver
> > > > > > > > vm1 | [ 0.969146] e1000e: Copyright(c) 1999 - 2015 Intel
> > > > > > > Corporation.
> > > > > > > > vm1 | [ 0.969179] igb: Intel(R) Gigabit Ethernet Network
> > > > > Driver
> > > > > > > > vm1 | [ 0.969183] igb: Copyright (c) 2007-2014 Intel
> > > > > Corporation.
> > > > > > > > vm1 | [ 0.969534] ehci_hcd: USB 2.0 'Enhanced' Host
> > > Controller
> > > > > > > (EHCI) Driver
> > > > > > > > vm1 | [ 0.969543] ehci-pci: EHCI PCI platform driver
> > > > > > > > vm1 | [ 0.969763] usbcore: registered new interface
> > > driver uas
> > > > > > > > vm1 | [ 0.969801] usbcore: registered new interface driver
> > > > > > > usb-storage
> > > > > > > > vm1 | [ 0.970286] i2c_dev: i2c /dev entries driver
> > > > > > > > vm1 | [ 0.970482] sdhci: Secure Digital Host Controller
> > > > > Interface
> > > > > > > driver
> > > > > > > > vm1 | [ 0.970485] sdhci: Copyright(c) Pierre Ossman
> > > > > > > > vm1 | [ 0.970488] sdhci-pltfm: SDHCI platform and OF
> > > driver
> > > > > helper
> > > > > > > > vm1 | [ 0.970671] usbcore: registered new interface driver
> > > > > usbhid
> > > > > > > > vm1 | [ 0.970675] usbhid: USB HID core driver
> > > > > > > > vm1 | [ 0.971182] NET: Registered PF_INET6 protocol family
> > > > > > > > vm1 | [ 0.972106] Segment Routing with IPv6
> > > > > > > > vm1 | [ 0.972143] In-situ OAM (IOAM) with IPv6
> > > > > > > > vm1 | [ 0.972197] sit: IPv6, IPv4 and MPLS over IPv4
> > > tunneling
> > > > > > > driver
> > > > > > > > vm1 | [ 0.972682] NET: Registered PF_PACKET protocol
> > > family
> > > > > > > > vm1 | [ 0.972887] can: controller area network core
> > > > > > > > vm1 | [ 0.972921] NET: Registered PF_CAN protocol family
> > > > > > > > vm1 | [ 0.972926] can: raw protocol
> > > > > > > > vm1 | [ 0.972932] can: broadcast manager protocol
> > > > > > > > vm1 | [ 0.972944] can: netlink gateway - max_hops=1
> > > > > > > > vm1 | [ 0.972973] 8021q: 802.1Q VLAN Support v1.8
> > > > > > > > vm1 | [ 0.973246] printk: console [ttyAMA0]: printing
> > > thread
> > > > > > > started
> > > > > > > > vm1 | [ 1.043530] uart-pl011 12000.pl011_uart: no DMA
> > > platform
> > > > > > > data
> > > > > > > > vm1 | [ 1.099243] VFS: Cannot open root device "(null)" or
> > > > > > > unknown-
> > > > > > > > block(0,0): error -6
> > > > > > > > vm1 | [ 1.099253] Please append a correct "root=" boot
> > > option;
> > > > > > > here are
> > > > > > > > the available partitions:
> > > > > > > > vm1 | [ 1.099259] Kernel panic - not syncing:
> > > > > > > >
> > > > > > > > Regards,
> > > > > > > > Qiang
> > > > > > > >
> > > > > > > > On Wed, Feb 19, 2025 at 5:17 PM Adam Lackorzynski <adam@l4re.org
> > > > > > > > <mailto:adam@l4re.org>> wrote:
> > > > > > > >
> > > > > > > > Hi Qiang,
> > > > > > > >
> > > > > > > > what you did is good.
> > > > > > > >
> > > > > > > > The messages shown are giving hints on the setup and are not
> > > > > > > generally
> > > > > > > > bad.
> > > > > > > > If the ioproxy says there's no resource it means that a
> > > > > > > device/resource
> > > > > > > > is listed in the device tree but not on the vbus, i.e. this
> > > > > resource
> > > > > > > is
> > > > > > > > not available for the VM. uvmm thus disables this node in the
> > > > > device
> > > > > > > > tree.
> > > > > > > > The platform_ctl cap message is coming from io, telling us
> > > that
> > > > > io
> > > > > > > > cannot offer the Platform_control API because no cap has been
> > > > > made
> > > > > > > > available.
> > > > > > > >
> > > > > > > > Regarding the UART, there's also a hint, and I believe that
> > > is
> > > > > also
> > > > > > > the
> > > > > > > > reason why no output from Linux is seen. You already noticed
> > > as
> > > > > well.
> > > > > > > > pl011 and linflex are not compatible. What I would propose is
> > > > > that
> > > > > > > you
> > > > > > > > add a node in the DT for the pl011, as uvmm can emulate this
> > > UART
> > > > > > > type.
> > > > > > > > An example can be found in
> > > > > pkg/uvmm/configs/dts/vmm-devices-arm.dtsi.
> > > > > > > > This file contains two variants of a UART. The pl011 one
> > > which I
> > > > > just
> > > > > > > > mentioned and a virtio-console one. Both will work. You can
> > > take
> > > > > the
> > > > > > > > contents of this file as is, however pay attention to the
> > > MMIO
> > > > > ranges
> > > > > > > > and IRQs used. Choose a free range in the guest physical
> > > address
> > > > > > > space
> > > > > > > > of your guest (aka a range not used in the device tree) and
> > > > > change
> > > > > > > the
> > > > > > > > addresses accordingly. Similar with the interrupts, use one
> > > not
> > > > > used
> > > > > > > > previously.
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Adam
> > > > > > > >
> > > > > > > > On Tue Feb 18, 2025 at 18:02:32 +0800, qiang xu wrote:
> > > > > > > > > Hi Adam,
> > > > > > > > >
> > > > > > > > > Thank you very much for your help. I selected the option
> > > > > "*Target
> > > > > > > > > configuration -> Use PSCI[]**" *in the Fiasco compile
> > > options
> > > > > and
> > > > > > > > > recompiled. Then, in the L4 compile options, I selected
> > > *"uvmm
> > > > > > > virtual
> > > > > > > > > machine monitor -> PSCI interface support[]*" and
> > > recompiled
> > > > > L4.
> > > > > > > After
> > > > > > > > > running it in boot, I encountered the overlap issue again.
> > > > > Later,
> > > > > > > I
> > > > > > > > > adjusted the `DEFAULT_RELOC_arm64`and resolved it.
> > > However,
> > > > > when
> > > > > > > I started,
> _______________________________________________
> l4-hackers mailing list -- l4-hackers@os.inf.tu-dresden.de
> To unsubscribe send an email to l4-hackers-leave@os.inf.tu-dresden.de
Adam
--
Adam adam@os.inf.tu-dresden.de
Lackorzynski http://os.inf.tu-dresden.de/~adam/
_______________________________________________
l4-hackers mailing list -- l4-hackers@os.inf.tu-dresden.de
To unsubscribe send an email to l4-hackers-leave@os.inf.tu-dresden.de