Hi Yanneck,
On Mon Jun 14, 2021 at 13:15:22 +0200, Yanneck Geiger wrote:
Hello, unfortunately I can't get L4Re running on the Raspberry Pi 3 / 3+ using the provided Guider (https://l4re.org/rpi.html). I did the 64-Bit setup accordingly with the provided U-Boot and the ready-to-use images. U-Boot itself seems to work fine and I can set the IPs ... Unfortunately I don't know the address to load the .elf file so I'm using the following commands: "tftpboot bootstrap_hello_rpi3.elf" and "bootelf". After entering "bootelf" the output on serial spews garbage and after a few seconds the same garbage is "printed" in an interval of around 1 second. Am I doing anything wrong or am I missing something?
That actually does not sound too bad, the periodic output that comes once a second is probably "Hello World!" being printed, i.e., it worked principally. When there is garbage maybe the Baud rate of the UART is wrong. We're using 115200 Baud, is there anything different in your setup?
Adam