Is wrong my kernel command line, on this situation ? (Booting L4 linux) - l4-hackers

24 Mar 2014


      Hello, every l4-hacker.
I've succeeded booting "Hello world + L4/Fiasco" on Freescale 
i.MX6q_sabre_sd because big help of Admed, Tim, Matthias.
And then, I'm trying to boot "L4 Linux + L4/Fiasco" on my board.
I've  configured for L4 linux build.
Such as..
|System type -> ARM system type (L4 Linux)
Build type (Use ARMv7)
|
And then, I've successfully build it.
I've did "make uimage E='L4Linux ARM' ..." ,so I've got uimage.
And I try to boot it ,using 'uImage' and 'u-boot.bin'.
But I did not boot it on my board.
It was stoped at "l4linux | panic: going to sleep forever, bye"
====================
... (eclipsis)
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (junk in compressed archive); looks like 
an initrd
INITRD: Freeing memory.
l4x: Checks passed.
NetWinder Floating Point Emulator V0.97 (double precision)
msgmni has been set to 126
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
L4 serial driver
ttyLv0 at MMIO 0x1 (irq = 211, base_baud = 230400) is a L4
l4ser_shm: L4 shared mem serial driver
l4cdds: No name given, not starting.
brd: module loaded
l4bdds: No name given, not starting.
mousedev: PS/2 mouse device common for all mice
TCP: cubic registered
NET: Registered protocol family 17
Minicom2.6.2RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 3072KiB [1 disk] into ram disk... done.
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounting ext2 file system using the ext4 subsystem
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext2 filesystem) readonly on device 1:0.
Freeing unused kernel memory: 112K (022ea000 - 02306000)
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
CPU: 0 PID: 1 Comm: sh Not tainted 3.13.0-l4-svn46 #1
[<0200b6ec>] (unwind_backtrace+0x0/0xf8) from [<02005308>] 
(show_stack+0x10/0x14)
[<02005308>] (show_stack+0x10/0x14) from [<0222a17c>] (panic+0x78/0x1c0)
[<0222a17c>] (panic+0x78/0x1c0) from [<02017d28>] (do_exit+0x724/0x7cc)
[<02017d28>] (do_exit+0x724/0x7cc) from [<02017ea0>] 
(do_group_exit+0x40/0xa0)
[<02017ea0>] (do_group_exit+0x40/0xa0) from [<02021754>] 
(get_signal_to_deliver+0x1a4/0x474)
[<02021754>] (get_signal_to_deliver+0x1a4/0x474) from [<02006738>] 
(do_signal+0x78/0x3d4)
[<02006738>] (do_signal+0x78/0x3d4) from [<02006b08>] 
(do_work_pending+0x74/0xcc)
[<02006b08>] (do_work_pending+0x74/0xcc) from [<02009cf4>] 
(l4x_vcpu_entry_c+0x18ec/0x1e3c)
[<02009cf4>] (l4x_vcpu_entry_c+0x18ec/0x1e3c) from [<00094e9c>] (0x94e9c)
panic: going to sleep forever, bye
l4linux | panic: going to sleep forever, bye
====================
I guess that the problem is somthing about ramdisk(root file system) and 
kernel command line might be wrong.
Referentially I've used ramdisk file(ramdisk-arm.rd) and my kernel 
command line
"setenv bootargs_mmc 'setenv bootargs ${bootargs} root=/dev/mmcblk1p1 
rootwait rw video=mxcfb1:dev=ldb,LDB-XGA,if=RGB666 
video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24'".
How do you think about that?
Is wrong my kernel command line,on this situation ?
- Taeung -