Hi,

On Wed Aug 22, 2012 at 13:16:12 +0400, Nikolay Golikov wrote:

I trying to run fiasco.oc + l4re on freescale i.mx53qsb. And have some problems to do this.

I using i.mx51 platform configuration with some changes. I changed addresses in src/kern/arm/bsp/imx/mem_layout-arm-imx.cpp: EXTENSION class Mem_layout { public: enum Virt_layout_imx53 { Timer_map_base = 0xef1ac000, Uart_map_base = 0xef1bc000, Watchdog_map_base = 0xef198000, Pic_map_base = 0xef200000, Uart_base = Uart_map_base, };

enum Phys_layout_imx53 { Device_phys_base_1 = 0x53f00000, Device_phys_base_2 = 0x0fffc000,

Watchdog_phys_base   = 0x53f98000, // wdog1
Timer_phys_base      = 0x53fac000, // epit1
Uart_phys_base       = 0x53fbc000, // uart1
Pic_phys_base        = 0x0fffc000,

};

};

And made some little changes in other source files. When I try to boot it, I see something like this:

## Booting kernel from Legacy Image at 70800000 ... Image Name: L4 Image #47 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 897192 Bytes = 876.2 kB Load Address: 71000000 Entry Point: 71000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK

Starting kernel ...

L4 Bootstrapper Build: #47 �В�т. �а�в�г. 21 16:49:21 MSK 2012, 4.5.1 Scanning up to 1024 MB RAM Memory size is 512MB (Limited by Scan) (70000000 - 90000000) RAM: 0000000070000000 - 000000008fffffff: 524288kB Total RAM: 512MB mod04: 710c1000-710da540: hello mod03: 710a7000-710c0458: l4re mod02: 7106d000-710a6624: moe mod01: 71063000-7106c370: sigma0 mod00: 71015000-71062cac: fiasco Moving 5 modules to 71100000 with offset eb000 moving module 05 { 710c1000-710da540 } -> { 711ac000-711c5540 } moving module 04 { 710a7000-710c0458 } -> { 71192000-711ab458 } moving module 03 { 7106d000-710a6624 } -> { 71158000-71191624 } moving module 02 { 71063000-7106c370 } -> { 7114e000-71157370 } moving module 01 { 71015000-71062cac } -> { 71100000-7114dcac } Scanning fiasco Scanning sigma0 Scanning moe --init=rom/hello Relocated mbi to [0x7100f000-0x7100f0d6] Loading fiasco Loading sigma0 Loading moe find kernel info page... found kernel info page at 0x70002000 Regions of list regions [ 70001000, 700019bf] { 9c0} Kern fiasco [ 70002000, 7005cfff] { 5b000} Kern fiasco [ 70090000, 7009e17b] { e17c} Sigma0 sigma0 [ 70140000, 701717d3] { 317d4} Root moe [ 70178000, 7018eec7] { 16ec8} Root moe [ 71000000, 710143ef] { 143f0} Boot bootstrap [ 7100f000, 7100f1d3] { 1d4} Root Multiboot info [ 71192000, 711c553f] { 33540} Root Modules Memory API Version: (87) experimental Sigma0 config ip:700900e0 sp:71013044 Roottask config ip:70140178 sp:00000000 Starting kernel fiasco at 70001000 Hello from Startup::stage2 Initialize page table

It stops on line 151 src/kern/arm/gic.cpp: Io::write<Mword>(0, _dist_base + DIST_CTRL); where _dist_base is Pic_map_base. If I understand correctly tzic on i.mx53 and tzic on i.mx51 is equivalent.

The phys addresses in mem_layout must be 1m aligned: Pic_map_base = 0xef2fc000, Device_phys_base_2 = 0x0ff00000,

And second question: I do not understand for what purpose make pysical devices and sdram mapping in: src/kern/arm/bootstrap.cpp? // map sdram linear from 0xf0000000 for (va = Mem_layout::Map_base, pa = Mem_layout::Sdram_phys_base; va < Mem_layout::Map_base + (4 << 20); va += 0x100000, pa += 0x100000) map_1mb(page_dir, va, pa, true, false);

// map sdram 1:1 for (va = Mem_layout::Sdram_phys_base; va < Mem_layout::Sdram_phys_base + (4 << 20); va += 0x100000) map_1mb(page_dir, va, va, true, true);

map_hw(page_dir);

To map the kernel and some memory for it.

And why afterwards devises on physical addresses are out of order?

Fixed with above?

Adam