Hi, adam Thank you for answering. :-)
Sorry, I've asked you a question with misinformation.
I've misunderstood that my Freescale imx6q_sabre_sd board's Ethernet is 'Qualcomm Atheros AR8031-AL1A Gigabit Ethernet'.
My board's Ethernet Controller is contained in imx6 chip. And the driver for it is 'FEC Ethernet Driver'. So, I have to using ethernet driver which is 'l4linux/drivers/net/ethernet/
freescale'. But, I've failed configure 'CONFIG_FEC=y' because there is not 'FEC Ethernet Driver' on L4 linux's build menuconfig. But there are other ethernet drivers which are 'smsc','intel','marvell'... etc.
Though there is 'FEC Ethernet Driver' source code in 'l4linux/drivers/net/ethernet/freescale', why 'FEC Ethernet Driver' is not found on L4Linux build menuconfig ? How to build FEC ethernet driver for my board?
-Taeung-
I'm trying to secure Ethernet environment on L4 Linux. (using Freescale imx6 SABRE SD board)
My board's Ethernet is 'Qualcomm Atheros AR8031-AL1A Gigabit Ethernet'.
I've found source code for Ethernet Driver. Folder name is '/l4linux/drivers/net/ethernet/atheros'.
But, the folder only contain 'ATL1c' and 'ATL1e', 'ALX', 'ATLX'. I guess 'atheros' driver in L4 Linux don't support my ethernet driver.
L4Linux has the same drivers as native Linux, so if the driver is in Linux it is also in L4Linux (in the same version). There seems to be support for this type of network in the imx6 support code. So does the network work with the native Linux of the same version?
Hi Taeung, the FEC Ethernet Driver has no out-of-the-box support for L4 but it is possible to get it running with l4linux.
For example in the Kconfig both "config NET_VENTOR_FRESCALE" and "if NET_VENDOR_FREESCALE" needs the "depends on" trailed with "|| L4" so it will show in linux menuconfig.
But there are a few other places to patch in fec.h, fec_main.c, fec_ptp.c and l4/kernel/arch-arm/mach_setup.c along with the mapping of the Mmio and Irq space to the l4linux.
I am not aware of the imx6 ethernet silicon, but I am using the FEC Ethernet Driver for the integrated Dual-Ethernet Controller of a Freescale i.MX28 chip and it is running with L4.
Martin
Am 23.04.2014 12:07, schrieb Taeung:
Hi, adam Thank you for answering. :-)
Sorry, I've asked you a question with misinformation.
I've misunderstood that my Freescale imx6q_sabre_sd board's Ethernet is 'Qualcomm Atheros AR8031-AL1A Gigabit Ethernet'.
My board's Ethernet Controller is contained in imx6 chip. And the driver for it is 'FEC Ethernet Driver'. So, I have to using ethernet driver which is 'l4linux/drivers/net/ethernet/
freescale'. But, I've failed configure 'CONFIG_FEC=y' because there is not 'FEC Ethernet Driver' on L4 linux's build menuconfig. But there are other ethernet drivers which are 'smsc','intel','marvell'... etc.
Though there is 'FEC Ethernet Driver' source code in 'l4linux/drivers/net/ethernet/freescale', why 'FEC Ethernet Driver' is not found on L4Linux build menuconfig ? How to build FEC ethernet driver for my board?
-Taeung-
I'm trying to secure Ethernet environment on L4 Linux. (using Freescale imx6 SABRE SD board)
My board's Ethernet is 'Qualcomm Atheros AR8031-AL1A Gigabit Ethernet'.
I've found source code for Ethernet Driver. Folder name is '/l4linux/drivers/net/ethernet/atheros'.
But, the folder only contain 'ATL1c' and 'ATL1e', 'ALX', 'ATLX'. I guess 'atheros' driver in L4 Linux don't support my ethernet driver.
L4Linux has the same drivers as native Linux, so if the driver is in Linux it is also in L4Linux (in the same version). There seems to be support for this type of network in the imx6 support code. So does the network work with the native Linux of the same version?
l4-hackers mailing list l4-hackers@os.inf.tu-dresden.de http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers
l4-hackers@os.inf.tu-dresden.de
-
Martin Schröder -
Taeung