l4linux booting problem
fei li
tezuka158 at gmail.com
Wed Jul 23 05:29:32 CEST 2008
Hi
Thanks for your helpo, when I add module /log, it works but have some
problems, the output is below:
L4 Bootstrapper
move modules to 2000000 with offset 1d22000
move module 18 start f88000 -> 2caa000
move module 17 start f0f000 -> 2c31000
move module 16 start e70000 -> 2b92000
move module 15 start e6f000 -> 2b91000
move module 14 start b57000 -> 2879000
move module 13 start ab1000 -> 27d3000
move module 12 start 9d5000 -> 26f7000
move module 11 start 84c000 -> 256e000
move module 10 start 81d000 -> 253f000
move module 9 start 7d0000 -> 24f2000
move module 8 start 736000 -> 2458000
move module 7 start 6f6000 -> 2418000
move module 6 start 487000 -> 21a9000
move module 5 start 44a000 -> 216c000
move module 4 start 409000 -> 212b000
move module 3 start 36e000 -> 2090000
move module 2 start 337000 -> 2059000
move module 1 start 2de000 -> 2000000
Scanning /fiasco -serial_esc -comport 1
Scanning /sigma0
Scanning /roottask task modname "bmodfs" attached 5 modules
Bootloader MMAP:
[ 0, 9fc00) RAM (1)
[ 9fc00, a0000) reserved (2)
[ e8000, 100000) reserved (2)
[ 100000, c800000) RAM (1)
[ fffc0000, 100000000) reserved (2)
Relocated mbi to [0x61000-0x6128b]
Loading /fiasco
Loading /sigma0
Loading /roottask
find kernel info page...
found kernel info page at 0x1000
[ 1000, 60fff] Kern /fiasco
[ 61000, 61388] Root Multiboot info
[ 9fc00, 9ffff] Arch BIOS
[ e8000, fffff] Arch BIOS
[ 100000, 10937f] Sigma0 /sigma0
[ 110000, 2adfff] Root /roottask
[ 2d0000, 2dab7f] Boot bootstrap
[ 300000, 38fd5f] Kern /fiasco
[ 212b000, 3ca9fff] Root Modules Memory
[ fffc0000, ffffffff] Arch BIOS
API Version: (87) experimental
Sigma0 config ip:001047b8 sp:002da740
Roottask config ip:00110000 sp:00000000
Starting kernel /fiasco at 003008b8
Welcome to Fiasco(ia32)!
DD-L4(v2)/ia32 microkernel (C) 1998-2008 TU Dresden
Rev: rUNKNOWN compiled with gcc 4.1.3 for Intel Pentium []
Performance-critical config option(s) detected:
CONFIG_NDEBUG is off
Enabling special fully nested mode for PIC
Using the PIT (i8254) on IRQ 0 for scheduling
SERIAL ESC: allocated IRQ 4 for serial uart
SERIAL ESC: allocated IRQ 4 for serial uart
Not using serial hack in slow timer handler.
Absolute KIP Syscalls using: Sysenter
CPU: GenuineIntel (6:3:3:0) Model: Unknown CPU at 2573 MHz
8 KB L1 I Cache (4-way associative, 32 bytes per line)
Freeing init code/data: 20480 bytes (5 pages)
Calibrating timer loop... done.
SIGMA0: Hello!
KIP @ 1000
Found Fiasco: KIP syscalls: yes
allocated 4KB for maintenance structures
Roottask.
Command line found: "/roottask task modname "bmodfs" attached 5 modules "
204415kB ( 199MB) total RAM (reported by bootloader)
182380kB ( 179MB) received RAM from Sigma0
29808kB ( 30MB) reserved RAM for RMGR
Received I/O ports 0000-ffff
Attached irqs = [ <!0> 1 <!2> 3 <!4> 5 6 7 8 9 A B C D E F 10 11 ]
Roottask: Parsing command line config.
configured task 0x00 (bmodfs):
vm_offs:0 irq:3ffff lmcp:ffff allow_cli:0 mcp:ff prio:10 small:ff mods:5
Roottask: Loading 15 modules.
#05: loading "/names"
from [0212b000-0216b0ef] to [002d0000-002d67d7][002d7000-002e2000]
entry at 0005c060 via trampoline page code
symbols at [0b7fe000-0b800000] (8kB), lines at [0b7f8000-0b7fe000]
(24kB)
#06: loading "/log"
from [0216c000-021a8add] to [00400000-00406fca][00407000-00439848]
entry at 0005d060 via trampoline page code
symbols at [0b7f6000-0b7f8000] (8kB), lines at [0b7f0000-0b7f6000]
(24kB)
#07: loading "/l4io"
from [021a9000-02417b56] to [00c20000-00c44a25][00c45000-00cb3000]
entry at 0005e060 via trampoline page code
symbols at [0b79a000-0b7f0000] (344kB), lines at [0b780000-0b79a000]
(104kB)
#08: loading "/events"
from [02418000-02457320] to [01540000-01548d50][01549000-0155e5b0]
entry at 0005f060 via trampoline page code
symbols at [0b77e000-0b780000] (8kB), lines at [0b777000-0b77e000]
(28kB)
#09: loading "/dm_phys"
from [02458000-024f16a8] to [01500000-01513ad7][01514000-0151e000]
entry at 00060064 via trampoline page code
symbols at [0b772000-0b777000] (20kB), lines at [0b764000-0b772000]
(56kB)
#0a: loading "/simple_ts"
from [024f2000-0253e2f6] to [01400000-01408bca][01409000-01418608]
entry at 00062064 via trampoline page code
symbols at [0b762000-0b764000] (8kB), lines at [0b75a000-0b762000]
(32kB)
#0b: loading "/rtc"
from [0253f000-0256d623] to [01080000-01084660][01085000-0108a000]
entry at 00063060 via trampoline page code
symbols at [0b758000-0b75a000] (8kB), lines at [0b753000-0b758000]
(20kB)
#0c: loading "/con --vbemode 0x117"
from [0256e000-026f676b] to [00b00000-00b51791][00b52000-00b72000]
entry at 00064070 via trampoline page code
symbols at [0b746000-0b753000] (52kB), lines at [0b713000-0b746000]
(204kB)
#0d: loading "/loader --fprov=BMODFS l4linux.cfg"
from [026f7000-027d26f1] to [01300000-01327fb1][01328000-01347000]
entry at 0006507c via trampoline page code
symbols at [0b70c000-0b713000] (28kB), lines at [0b6f2000-0b70c000]
(104kB)
#0e: loading "/bmodfs"
from [027d3000-02878d12] to [01220000-01238551][01239000-01250000]
passing module /vmlinuz [
02879000-02b90930 ]
passing module /l4linux.cfg [
02b91000-02b91090 ]
passing module /libloader.s.so [
02b92000-02c30cb8 ]
passing module /libld-l4.s.so [
02c31000-02ca9cdd ]
passing module /drops-rd.rd [
02caa000-03caa000 ]
entry at 000660fc via trampoline page code
symbols at [0b6ed000-0b6f2000] (20kB), lines at [0b6da000-0b6ed000]
(76kB)
simplets| Configured for 64 tasks.
rtc | Date:23.07.2008 Time:03:23:08
con | Using fast memcpy.
io | Using platform configuration 'x86'
io | PCI: Using configuration type 1
io | PCI: Probing PCI hardware
io | PCI: Probing PCI hardware (bus 00)
io | PCI: PIIX3: Enabling Passive Release on 00:01.0
io | Limiting direct PCI/PCI transfers.
io | Activating ISA DMA hang workarounds.
io | 00000000-ffffffff : PCI mem
io | e0000000-e1ffffff : Cirrus Logic GD 5446
io | e2000000-e2000fff : Cirrus Logic GD 5446
io | 0000-ffff : PCI IO
io | 0cf8-0cff : PCI conf1
io | 1000-100f : Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton
II]
io | 1400-14ff : Realtek Semiconductor Co., Ltd. RTL-8029(AS)
io | b100-b11f : Intel Corporation 82371AB/EB/MB PIIX4 ACPI
bmodfs | Passed the following modules:
bmodfs | module "/vmlinuz" (3167kB)
bmodfs | module "/l4linux.cfg" (1kB)
bmodfs | module "/libloader.s.so" (636kB)
bmodfs | module "/libld-l4.s.so" (484kB)
bmodfs | module "/drops-rd.rd" (16384kB)
io | Available IRQs=[ <!0> 1 <!2> 3 <!4> 5 6 7 8 9 a b c d e f 10 11 ]
con | Character size is 8x14, font has 256 characters
con | Trying execution of ``set VBE mode'' using x86emu
con | Found VESA BIOS version 2.0
con | OEM VGABIOS Cirrus extension
loader | sleeping for 1000 ms
con | VBE mode 0x117 successfully set.
con | VESA reports 1024x768 at 16 2048bpl (00bb) [4096kB]
con | Color mapping: red=11:5 green=5:6 blue=0:5 res=0:0
con | No supported accelerated graphics card detected
con | Mapped I/O video mem e0000000 => 00400000 [4096kB] via l4io
con | Using MMXEXT for colorspace transform
con | L4INPUT native mode activated
con | L4INPUT: !!! W A R N I N G !!!
con | L4INPUT: Please, do not use Fiasco's "-esc" with L4INPUT.
con | L4INPUT: !!! W A R N I N G !!!
con | L4INPUT: Registered 0xb03d90 for callbacks.
ROOT: Sending ports 0060-006f to task #07
con | serio: i8042 AUX port at 0x60,0x64 irq 12
con | serio: i8042 KBD port at 0x60,0x64 irq 1
con | input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
con | input: AT Translated Set 2 keyboard on isa0060/serio0
con | input: PC Speaker
con | input: L4 input event injector
con | L4 input event injector: IRQ handler up
con | connect "ImExPS/2 Generic Explorer Mouse", isa0060/serio1/input0
con | connect "AT Translated Set 2 keyboard", isa0060/serio0/input0
con | connect "PC Speaker", isa0061/input0
con | connect "L4 input event injector", l4/sys
con | Running as C.02. Video mode is 1024x768 at 16.
loader | vmlinuz: Starting application using libld-l4.s.so
loader | vmlinuz,#f: Loading binary
loader | vmlinuz,#f: Loading ldso
loader | vmlinuz,#f: Starting libld-l4.s.so at 000138b0 via 0000cf3c
l4lx | ======> L4Linux 2.6 starting... <========
l4lx | Linux version 2.6.23-l4 (dingy at dingy-desktop) (gcc version 4.0.3
(Ubu
l4lx : ntu 4.0.3-1ubuntu5)) #1 Sun Mar 9 15:58:57 CST 2008
l4lx | Binary name: vmlinuz
l4lx | Kernel command line (5 args): mem=64M load_ramdisk=1
ramdisk_size=163
l4lx : 84 root=/dev/ram l4env_rd=drops-rd.rd
l4lx | Image: 00400000 - 007b9000 [3812 KiB].
l4lx | Areas: Text: 00400000 - 006b9000 [2788kB] (a bit longer)
l4lx | Data: 006b9000 - 006d9054 [128kB]
l4lx | Initdata: 006dc000 - 00716000 [232kB]
l4lx | BSS: 00718000 - 007b6f80 [635kB]
l4lx | l4lx_thread_create: Created thread 0f.03 (tamer0)
l4lx | Tamer0 is 0f.03
l4lx | Using tamed mode.
l4lx | Connecting to l4io server.
l4lx | l4env_linux_startup thread 4.
l4lx | l4lx_thread_create: Created thread 0f.04 (cpu0)
l4lx | main thread will be 0f.04
l4lx | l4env_register_pointer_section: addr = 00400000 size = 3239936
l4lx | sec-w-init: virt: 0x00400000 to 0x00716fff [3164 KiB]
l4lx | Noncontiguous region for sec-w-init
l4lx | sec-w-init: Number of physical regions: 5, 3239936 Bytes
l4lx | sec-w-init: 1: Phys: 0x002e2000 to 0x00347000, Size: 413696
l4lx | sec-w-init: 2: Phys: 0x012f1000 to 0x01300000, Size: 61440
l4lx | sec-w-init: 3: Phys: 0x001aa000 to 0x002ad000, Size: 1060864
l4lx | sec-w-init: 4: Phys: 0x01419000 to 0x01500000, Size: 946176
l4lx | sec-w-init: 5: Phys: 0x01347000 to 0x01400000, Size: 757760
l4lx | main thread: received startup message.
l4lx | Main thread running, waiting...
l4lx | setup_l4env_memory: Forcing superpages for main memory
l4lx | Main memory size: 64MB
l4lx | Main memory: virt: 0x00800000 to 0x047fffff [65536 KiB]
l4lx | Main memory: Number of physical regions: 1, 67108864 Bytes
l4lx | Main memory: 1: Phys: 0x07400000 to 0x0b400000, Size: 67108864
l4lx | Filling lower ptabs...
l4lx | Done (1027 entries).
l4lx | l4env_register_pointer_section: addr = 00718000 size = 659456
l4lx | end: virt: 0x00718000 to 0x007b8fff [644 KiB]
l4lx | end: Number of physical regions: 1, 659456 Bytes
l4lx | end: 1: Phys: 0x01250000 to 0x012f1000, Size: 659456
l4lx | l4env_rd_path: drops-rd.rd
l4lx | Loading: drops-rd.rd
l4lx | INITRD: Size of RAMdisk is 16384KiB
l4lx | RAMdisk from 04800000 to 05800000 [16384KiB]
l4lx | l4lx_thread_create: Created thread 0f.05 (timer.i0)
l4lx | Jumping over 4x 'hlt' at 0x6e5878
l4lx | idler0: utcb=0xbff00400 0f.04
l4lx | l4lx_thread_create: Created thread 0f.06 (idler0)
l4lx | Starting L4FB via CON
con | vc_loop(): vc[1] running as C.07
l4lx | l4lx_thread_create: Created thread 0f.07 (L4ConInput)
con | vc[1] 1024x768 at 16, bpl:2048, gmode:0x35, evprt:F.07 save:0
l4lx | l4fb:con: 1024x750 at 16 2bypp, size: 1540096
l4lx | l4fb:con 5:6:5 11:5:0 linelen=2048 visual=2
con | Mapped client FB to 00800000 size 00178000
l4lx | l4lx_thread_create: Created thread 0f.08 (CON refresher)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 24.
l4lx | acquire_irq: Error attaching to IRQ 24
l4lx | l4lx_thread_create: Created thread 0f.09 (IRQ24)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 23.
l4lx | acquire_irq: Error attaching to IRQ 23
l4lx | l4lx_thread_create: Created thread 0f.0a (IRQ23)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 22.
l4lx | acquire_irq: Error attaching to IRQ 22
l4lx | l4lx_thread_create: Created thread 0f.0b (IRQ22)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 21.
l4lx | acquire_irq: Error attaching to IRQ 21
l4lx | l4lx_thread_create: Created thread 0f.0c (IRQ21)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 20.
l4lx | acquire_irq: Error attaching to IRQ 20
l4lx | l4lx_thread_create: Created thread 0f.0d (IRQ20)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 19.
l4lx | acquire_irq: Error attaching to IRQ 19
l4lx | l4lx_thread_create: Created thread 0f.0e (IRQ19)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 18.
l4lx | acquire_irq: Error attaching to IRQ 18
l4lx | l4lx_thread_create: Created thread 0f.0f (IRQ18)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 17.
l4lx | l4lx_thread_create: Created thread 0f.10 (IRQ17)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 16.
l4lx | l4lx_thread_create: Created thread 0f.11 (IRQ16)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 15.
l4lx | l4lx_thread_create: Created thread 0f.12 (IRQ15)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 14.
l4lx | l4lx_thread_create: Created thread 0f.13 (IRQ14)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 13.
l4lx | l4lx_thread_create: Created thread 0f.14 (IRQ13)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 12.
l4lx | acquire_irq: Error attaching to IRQ 12
l4lx | l4lx_thread_create: Created thread 0f.15 (IRQ12)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 11.
l4lx | l4lx_thread_create: Created thread 0f.16 (IRQ11)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 10.
l4lx | l4lx_thread_create: Created thread 0f.17 (IRQ10)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 9.
l4lx | l4lx_thread_create: Created thread 0f.18 (IRQ9)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 8.
l4lx | l4lx_thread_create: Created thread 0f.19 (IRQ8)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 7.
l4lx | l4lx_thread_create: Created thread 0f.1a (IRQ7)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 6.
l4lx | l4lx_thread_create: Created thread 0f.1b (IRQ6)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 5.
l4lx | l4lx_thread_create: Created thread 0f.1c (IRQ5)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 4.
l4lx | acquire_irq: Error attaching to IRQ 4
l4lx | l4lx_thread_create: Created thread 0f.1d (IRQ4)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 3.
l4lx | l4lx_thread_create: Created thread 0f.1e (IRQ3)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 2.
l4lx | acquire_irq: Error attaching to IRQ 2
l4lx | l4lx_thread_create: Created thread 0f.1f (IRQ2)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 1.
l4lx | acquire_irq: Error attaching to IRQ 1
l4lx | l4lx_thread_create: Created thread 0f.20 (IRQ1)
In the last rows we see that there are errors in IRQs, then I add
showpfexc=1 in the l4linux.cfg, it's the same thing, another thing is what
does this mean? If you need more information, I'll show you next time and
thanks for your help a second time.
2008/7/23 Adam Lackorzynski <adam at os.inf.tu-dresden.de>:
> Hi Fei,
>
> On Mon Jul 21, 2008 at 23:06:29 +0800, fei li wrote:
> >
> > title L4Linux
> > kernel /bootstrap -serial -modaddr 0x2000000
> > module /fiasco -serial_esc -comport 1
> > module /sigma0
> > module /roottask task modname "bmodfs" attached 5 modules
> > module /names
>
> Please also add
> module /log
> here.
>
> > module /l4io
> > module /events
> > module /dm_phys
> > module /simple_ts
> > module /rtc
> > module /con --vbemode 0x117
> > module /bmodfs
> > module /vmlinuz
> > module /l4linux.cfg
> > module /libloader.s.so
> > module /libld-l4.s.so
> > module /drops-rd.rd
> > module /loader --fprov=BMODFS l4linux.cfg
> >
> > In l4linux.cfg, I wrote
> >
> > sleep 1
> > task "vmlinuz" "mem=64M load_ramdisk=1 ramdisk_size=16384 root=/dev/ram
> > l4env_rd=drops-rd.rd"
>
> Please add showpfexc=1 to the parameter list. This will show lots more
> output and hopefully give more information on what's going on.
>
> > *l4lx | L4RM: [PF] read at 0x00000000, ip 00000000, src E.02
> > *l4lx | [E.0] l4rm/lib/src/pagefault.c:81:__unknown_pf():
> > *l4lx | unhandled page fault
> >
> > --PANIC, 'g' for exit------------------------------------IP:
> > a00b3754
> > [l4lx.rm] (e.00) jdb:
> >
> > At last lines you will see the problem, and I checked the fiasco, it was
> > ok. I found someone had similar problems but not the same, and Adam
> > said L4Linux
> > is not allowed to do port accesses (except it is explicitely allowed). I
> > don't know what my problem is and I hope someone will give me some advice
> > and thanks a lot.
>
> We'll hopefullly see with more output.
>
>
> Adam
> --
> Adam adam at os.inf.tu-dresden.de
> Lackorzynski http://os.inf.tu-dresden.de/~adam/<http://os.inf.tu-dresden.de/%7Eadam/>
>
> _______________________________________________
> l4-hackers mailing list
> l4-hackers at os.inf.tu-dresden.de
> http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://os.inf.tu-dresden.de/pipermail/l4-hackers/attachments/20080723/0cfe252c/attachment.htm>
More information about the l4-hackers
mailing list