USB mouse error
Neohtm
neohtm at gmail.com
Wed Apr 29 11:44:12 CEST 2009
Thanks Christian,
it works after i removed the l4/pkg/usbhid. recompiled the l4/pkg/usb and
replaced them. it works perfectly on DOpE
but errors come out when i tried to load the l4linux26 inside
the usbcore disconnect the usb mouse when loading the l4linux. is it that i
had did the wrong setup when compiling the l4linux?
Welcome to Fiasco(ia32)!
DD-L4(v2)/ia32 microkernel (C) 1998-2009 TU Dresden
Rev: r438 compiled with gcc 4.3.2 for Intel Pentium []
Performance-critical config option(s) detected:
CONFIG_NDEBUG is off
CONFIG_NO_FRAME_PTR is off
Enabling special fully nested mode for PIC
Using the PIT (i8254) on IRQ 0 for scheduling
SERIAL ESC: allocated IRQ 4 for serial uart
SERIAL ESC: allocated IRQ 4 for serial uart
Not using serial hack in slow timer handler.
Absolute KIP Syscalls using: Sysenter
CPU: GenuineIntel (6:3:3:0) Model: Pentium II (Klamath) at 1796 MHz
32 KB L1 I Cache (8-way associative, 64 bytes per line)
32 KB L1 D Cache (8-way associative, 64 bytes per line)
2048 KB L2 U Cache (8-way associative, 64 bytes per line)
Freeing init code/data: 24576 bytes (6 pages)
Calibrating timer loop... done.
SIGMA0: Hello!
KIP @ 1000
Found Fiasco: KIP syscalls: yes
allocated 4KB for maintenance structures
Roottask.
Command line found: "(cd)/boot/l4/l4env/roottask task modname "loader"
allow_cli task modname "bmodfs" attached 5 modules"
261695kB ( 255MB) total RAM (reported by bootloader)
234336kB ( 229MB) received RAM from Sigma0
34636kB ( 34MB) reserved RAM for RMGR
Received I/O ports 0000-ffff
Attached irqs = [ <!0> 1 <!2> 3 <!4> 5 6 7 8 9 A B C D E F 10 11 ]
Roottask: Parsing command line config.
configured task 0x00 (loader):
vm_offs:0 irq:3ffff lmcp:ffff allow_cli:1 mcp:ff prio:10 small:ff mods:0
configured task 0x00 (bmodfs):
vm_offs:0 irq:3ffff lmcp:ffff allow_cli:0 mcp:ff prio:10 small:ff mods:5
Roottask: Loading 17 modules.
#05: loading "(cd)/boot/l4/l4env/events"
from [0612e000-0616fe99] to [01540000-01549190][0154a000-0155f590]
entry at 0005f374 via trampoline page code
symbols at [0eb74000-0eb76000] (8kB), lines at [0eb6d000-0eb74000]
(28kB)
#06: loading "(cd)/boot/l4/l4env/names --events"
from [06170000-061b1c12] to [002d0000-002d6a37][002d7000-002e2000]
entry at 0006037c via trampoline page code
symbols at [0eb6b000-0eb6d000] (8kB), lines at [0eb65000-0eb6b000]
(24kB)
#07: loading "(cd)/boot/l4/l4env/log"
from [061b2000-061efd07] to [00400000-00406eca][00407000-00439808]
entry at 00061370 via trampoline page code
symbols at [0eb63000-0eb65000] (8kB), lines at [0eb5d000-0eb63000]
(24kB)
#08: loading "(cd)/boot/l4/l4env/dm_phys --isa=0x00800000"
from [061f0000-0628a8b4] to [01500000-01513cb7][01514000-0151e000]
entry at 00062384 via trampoline page code
symbols at [0eb58000-0eb5d000] (20kB), lines at [0eb4a000-0eb58000]
(56kB)
#09: loading "(cd)/boot/l4/l4env/simple_ts -t 300"
from [0628b000-062d8310] to [01400000-01408dea][01409000-014185e8]
entry at 0006337c via trampoline page code
symbols at [0eb48000-0eb4a000] (8kB), lines at [0eb40000-0eb48000]
(32kB)
#0a: loading "(cd)/boot/l4/l4env/rtc"
from [062d9000-06308a5c] to [01080000-010845c0][01085000-0108a000]
entry at 00064370 via trampoline page code
symbols at [0eb3e000-0eb40000] (8kB), lines at [0eb39000-0eb3e000]
(20kB)
#0b: loading "(cd)/boot/l4/l4env/l4io"
from [06309000-0654a391] to [00c20000-00c45315][00c46000-00cb4000]
entry at 00066370 via trampoline page code
symbols at [0eae3000-0eb39000] (344kB), lines at [0eac9000-0eae3000]
(104kB)
#0c: loading "(cd)/boot/l4/l4env/l4dope"
from [0654b000-066c2384] to [01b00000-01b45ef1][01b46000-01b8b000]
entry at 00067374 via trampoline page code
symbols at [0eabb000-0eac9000] (56kB), lines at [0ea8d000-0eabb000]
(184kB)
#0d: loading "(cd)/boot/l4/usb/usbcore"
from [066c3000-068faac1] to [008e0000-0092600d][00927000-0094c000]
entry at 00068374 via trampoline page code
symbols at [0ea81000-0ea8d000] (48kB), lines at [0ea4b000-0ea81000]
(216kB)
#0e: loading "(cd)/boot/l4/usb/usbhid"
from [068fb000-06b0a851] to [00cc0000-00cffecd][00d00000-00d24000]
entry at 00069370 via trampoline page code
symbols at [0ea40000-0ea4b000] (44kB), lines at [0ea11000-0ea40000]
(188kB)
#0f: loading "(cd)/boot/l4/l4env/bmodfs"
from [06b0b000-06bb2f8d] to [01220000-01238689][01239000-01250000]
passing module (cd)/boot/l4/cfg/l4linux26.cfg [
06bb3000-06bb3165 ]
passing module (cd)/boot/l4/l4env/libloader.s.so [
06bb4000-06c52f11 ]
passing module (cd)/boot/l4/l4env/libld-l4.s.so [
06c53000-06ccc219 ]
passing module (cd)/boot/l4/l4linux/vmlinuz [
06ccd000-07083183 ]
passing module (cd)/boot/l4/l4linux/drops.rd [
07084000-08084000 ]
entry at 0006a46c via trampoline page code
symbols at [0ea0c000-0ea11000] (20kB), lines at [0e9f9000-0ea0c000]
(76kB)
#10: loading "(cd)/boot/l4/l4env/loader --fprov=BMODFS l4linux26.cfg"
from [08084000-08162b6d] to [01300000-013291c9][0132a000-01349000]
entry at 0006b390 via trampoline page code
symbols at [0e9f2000-0e9f9000] (28kB), lines at [0e9d8000-0e9f2000]
(104kB)
ROOT: Sending ports 0070-0070 to task #0a
ROOT: Sending ports 0080-0080 to task #0a
ROOT: Sending ports 0071-0071 to task #0a
names | Starting thread listening for `exit' events
rtc | Date:29.04.2009 Time:09:33:00
simplets| Configured for 300 tasks.
bmodfs | Passed the following modules:
bmodfs | module "(cd)/boot/l4/cfg/l4linux26.cfg" (1kB)
bmodfs | module "(cd)/boot/l4/l4env/libloader.s.so" (636kB)
bmodfs | module "(cd)/boot/l4/l4env/libld-l4.s.so" (485kB)
bmodfs | module "(cd)/boot/l4/l4linux/vmlinuz" (3801kB)
bmodfs | module "(cd)/boot/l4/l4linux/drops.rd" (16384kB)
loader | Can't map tbuf status page
usbcore | main(): DDE USB CORE initiaizing:
usbcore | main(): Initializing DDE base system.
loader | sleeping for 1000 ms
io | Using platform configuration 'x86'
ROOT: Sending ports 0cfb-0cfb to task #0b
ROOT: Sending ports 0cf8-0cfb to task #0b
ROOT: Sending ports 0cfe-0cff to task #0b
io | PCI: Using configuration type 1
io | PCI: Probing PCI hardware
io | PCI: Probing PCI hardware (bus 00)
ROOT: Sending ports 0cfc-0cff to task #0b
usbhid | main(): DDEUSB client side initiaizing:
io | PCI: PIIX3: Enabling Passive Release on 00:01.0
io | Limiting direct PCI/PCI transfers.
io | Activating ISA DMA hang workarounds.
io | 00000000-ffffffff : PCI mem
io | f0000000-f1ffffff : Cirrus Logic GD 5446
io | f2000000-f2000fff : Cirrus Logic GD 5446
io | 0000-ffff : PCI IO
io | 0cf8-0cff : PCI conf1
io | b000-b03f : Intel Corporation 82371AB/EB/MB PIIX4 ACPI
io | b100-b11f : Intel Corporation 82371AB/EB/MB PIIX4 ACPI
io | c000-c00f : Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton
II]
io | c020-c03f : Intel Corporation 82371SB PIIX3 USB [Natoma/Triton
II]
io | c100-c1ff : Realtek Semiconductor Co., Ltd. RTL-8029(AS)
io | Available IRQs=[ <!0> 1 <!2> 3 <!4> 5 6 7 8 9 a b c d e f 10 11 ]
usbhid | Softirq daemon starting
usbhid | Initializing DDE page cache
usbhid | <6>usbcore: registered new interface driver hub
usbhid | <6>usbcore: registered new device driver usb
usbhid | unimplemented: pci_fixup_device
usbhid | unimplemented: pci_fixup_device
usbhid | _add_ddekit_device: Detected device: 8086:7000
usbhid | unimplemented: pci_fixup_device
usbhid | unimplemented: pci_fixup_device
usbhid | _add_ddekit_device: Detected device: 8086:7010
usbhid | unimplemented: pci_fixup_device
usbhid | unimplemented: pci_fixup_device
usbhid | _add_ddekit_device: Detected device: 8086:7020
usbhid | unimplemented: pci_fixup_device
usbhid | unimplemented: pci_fixup_device
usbhid | _add_ddekit_device: Detected device: 8086:7113
usbhid | unimplemented: pci_fixup_device
usbhid | unimplemented: pci_fixup_device
usbhid | _add_ddekit_device: Detected device: 1013:b8
usbhid | unimplemented: pci_fixup_device
usbhid | unimplemented: pci_fixup_device
usbhid | _add_ddekit_device: Detected device: 10ec:8029
l4dope | L4INPUT native mode activated
l4dope | L4INPUT: !!! W A R N I N G !!!
usbcore | main(): Initializing DDE kmalloc.
usbcore | main(): Initializing DDE process.
usbcore | main(): Initializing DDE timers.
l4dope | L4INPUT: Please, do not use Fiasco's "-esc" with L4INPUT.
l4dope | L4INPUT: !!! W A R N I N G !!!
ROOT: Sending ports 0060-006f to task #0b
usbcore | main(): Initializing DDE softirq.
l4dope | Failed to disable AUX port, but continuing anyway... Is this a
SiS?
l4dope | If AUX port is really absent please use the 'i8042.noaux' option.
l4dope | serio: i8042 KBD port at 0x60,0x64 irq 1
usbcore | Softirq daemon starting
usbcore | main(): Doing initcalls...
usbcore | Initializing DDE page cache
usbhid |
<6>/home/user/Desktop/tudos/l4/pkg/usb/lib/libddeusb26/src/ddeusb_vhc
usbhid : d.c: driver ddeusb_vhcd, DDEUSB Virtual Host Controller
usbhid |
usbhid | <6>ddeusb_vhcd ddeusb_vhcd: DDEUSB Virtual Host Controller
usbhid | <6>ddeusb_vhcd ddeusb_vhcd: new USB bus registered, assigned bus
numb
usbhid : er 1
usbhid | going to init root hub
usbhid | <6>usb usb1: configuration #1 chosen from 1 choice
usbhid | <6>hub 1-0:1.0: USB hub found
usbhid | <6>hub 1-0:1.0: 13 ports detected
usbcore | <6>usbcore: registered new interface driver hub
usbcore | <6>usbcore: registered new device driver usb
usbcore | unimplemented: pci_fixup_device
usbcore | unimplemented: pci_fixup_device
usbcore | _add_ddekit_device: Detected device: 8086:7000
usbcore | unimplemented: pci_fixup_device
usbcore | unimplemented: pci_fixup_device
usbcore | _add_ddekit_device: Detected device: 8086:7010
usbcore | unimplemented: pci_fixup_device
usbcore | unimplemented: pci_fixup_device
usbcore | _add_ddekit_device: Detected device: 8086:7020
usbcore | unimplemented: pci_fixup_device
usbcore | unimplemented: pci_fixup_device
usbcore | _add_ddekit_device: Detected device: 8086:7113
usbcore | unimplemented: pci_fixup_device
usbcore | unimplemented: pci_fixup_device
usbcore | _add_ddekit_device: Detected device: 1013:b8
usbcore | unimplemented: pci_fixup_device
usbcore | unimplemented: pci_fixup_device
usbcore | _add_ddekit_device: Detected device: 10ec:8029
usbcore | <6>usbcore: registered new interface driver ddeusb
usbcore | <7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI)
Dri
usbcore : ver (PCI)
usbcore | <6>USB Universal Host Controller Interface driver v3.0
ROOT: Sending ports c020-c03f to task #0b
io | PCI: Setting latency timer of device 00:01.2 to 64
usbcore | <6>uhci_hcd 0000:00:02.0: UHCI Host Controller
usbcore | <6>uhci_hcd 0000:00:02.0: new USB bus registered, assigned bus
number
usbcore : 1
usbcore | <6>uhci_hcd 0000:00:02.0: irq 9, io base 0x0000c020
usbcore | going to init root hub
usbcore | <6>usb usb1: configuration #1 chosen from 1 choice
usbcore | <6>hub 1-0:1.0: USB hub found
usbcore | <6>hub 1-0:1.0: 2 ports detected
l4dope | input: AT Raw Set 2 keyboard on isa0060/serio0
l4dope | input: PC Speaker
l4dope | input: L4 input event injector
l4dope | L4 input event injector: IRQ handler up
l4dope | connect "AT Raw Set 2 keyboard", isa0060/serio0/input0
l4dope | connect "PC Speaker", isa0061/input0
l4dope | connect "L4 input event injector", l4/sys
l4dope | SharedMem(alloc): hl.raw=100000, id=68, size=800
l4dope | SharedMem(get_adr): address = 0x5000
l4dope | SharedMem(alloc): hl.raw=100000, id=69, size=800
l4dope | SharedMem(get_adr): address = 0x6000
l4dope | SharedMem(alloc): hl.raw=100000, id=6a, size=800
l4dope | SharedMem(get_adr): address = 0x7000
l4dope | SharedMem(alloc): hl.raw=100000, id=6b, size=800
l4dope | SharedMem(get_adr): address = 0xd000
l4dope | SharedMem(alloc): hl.raw=100000, id=6c, size=800
l4dope | SharedMem(get_adr): address = 0xe000
l4dope | SharedMem(alloc): hl.raw=100000, id=6d, size=800
l4dope | SharedMem(get_adr): address = 0xf000
l4dope | SharedMem(alloc): hl.raw=100000, id=6f, size=800
l4dope | SharedMem(get_adr): address = 0x16000
l4dope | SharedMem(alloc): hl.raw=100000, id=74, size=484
l4dope | SharedMem(get_adr): address = 0x20000
l4dope | dope: paddr=f0000000 size=4096KiB
l4dope | Mapped video memory at f0000000 to 00400000+000000 [4096kB] via
L4IO
l4dope | mapping: vaddr=0x400000 size=4194304(0x400000) offset=0(0x0)
l4dope | Frame buffer base: 0x400000
l4dope | Resolution: 1024x768x16
l4dope | Bytes per scanline: 2048
usbhid | going to root:whub poll
l4dope | Current video mode is 1024x768 red=11:5 green=5:6 blue=0:5 res=0:0
usbcore | going to root:whub poll
usbcore | unimplemented: pci_fixup_device
usbcore | unimplemented: pci_fixup_device
usbcore | unimplemented: pci_fixup_device
usbcore | unimplemented: pci_fixup_device
usbcore | unimplemented: pci_fixup_device
usbcore | unimplemented: pci_fixup_device
usbcore | main(): Registered at names.
usbcore | main(): READY.
usbhid | libddeusb_server_loop(): d_urbs @ 0x00180004
usbcore | ddeusb_core_ddeusb_setup_control_ds_component(): Attached control
dat
usbcore : a space (size :d5b88, offset: 4) returned 0 (mapped to
0x001
usbcore : 80004)
usbhid | <6>usbcore: registered new interface driver usbhid
usbhid |
<6>/home/user/Desktop/tudos/l4/pkg/usb/examples/usbhid/src/contrib/dr
usbhid : iver/usb/input/hid-core.c: v2.6:USB HID core driver
usbhid | unimplemented: pci_fixup_device
usbhid | unimplemented: pci_fixup_device
usbhid | unimplemented: pci_fixup_device
usbhid | unimplemented: pci_fixup_device
usbhid | unimplemented: pci_fixup_device
usbhid | unimplemented: pci_fixup_device
usbhid | main(): found l4i_proxy at c.6
usbcore | <6>usb 1-2: new full speed USB device using uhci_hcd and address 2
usbcore | <6>usb 1-2: configuration #1 chosen from 1 choice
loader | vmlinuz: Starting application using libld-l4.s.so
loader | vmlinuz,#11: Loading binary
loader | vmlinuz,#11: Loading ldso
loader | vmlinuz,#11: Starting libld-l4.s.so at 000138e0 via 0000cc40
usbhid | <6>usb 1-1: new full speed USB device using ddeusb_vhcd and
address 2
usbhid | <6>usb 1-1: configuration #1 chosen from 1 choice
l4lx | ======> L4Linux 2.6 starting... <========
l4lx | Linux version 2.6.28-l4-svn143 (user at debian) (gcc version 4.3.2
(Debi
l4lx : an 4.3.2-1.1) ) #2 Fri Mar 6 21:57:21 MYT 2009
l4lx | Binary name: vmlinuz
l4lx | Linux kernel command line (5 args): mem=64M load_ramdisk=1
ramdisk_si
l4lx : ze=16384 root=/dev/ram l4env_rd=drops.rd
l4lx | Image: 00400000 - 007f2000 [4040 KiB].
l4lx | Areas: Text: 00400000 - 006f6000 [3032kB] (a bit longer)
l4lx | Data: 006f6000 - 0071d6d4 [157kB]
l4lx | Initdata: 00720000 - 00761000 [260kB]
l4lx | BSS: 00762000 - 007f1030 [572kB]
l4lx | l4lx_thread_create: Created thread 11.03 (tamer0)
l4lx | Tamer0 is 11.03
l4lx | Using tamed mode.
ROOT: Sending all ports (for cli/sti) to task #10
l4lx | Got 65536 out of 65536 I/O ports
l4lx | Connecting to l4io server.
l4lx | l4env_linux_startup thread 4.
l4lx | l4lx_thread_create: Created thread 11.04 (cpu0)
l4lx | main thread will be 11.04
l4lx | l4env_register_pointer_section: addr = 006f6000 size = 1032192
l4lx | sec-w-init: virt: 0x006f6000 to 0x007f1fff [1008 KiB]
l4lx | sec-w-init: Number of physical regions: 1, 1032192 Bytes
l4lx | sec-w-init: 1: Phys: 0x01b8b000 to 0x01c87000, Size: 1032192
l4lx | main thread: received startup message.
l4lx | memory_setup: mem=64M load_ramdisk=1 ramdisk_size=16384
root=/dev/ram
l4lx : l4env_rd=drops.rd
l4lx | setup_l4env_memory: Forcing superpages for main memory
l4lx | Main thread running, waiting...
l4lx | Main memory size: 64MB
l4lx | Got 2048kB of ISA DMA memory.
l4lx | ISA DMA memory: virt: 0x00800000 to 0x009fffff [2048 KiB]
l4lx | ISA DMA memory: Number of physical regions: 1, 2097152 Bytes
l4lx | ISA DMA memory: 1: Phys: 0x0043a000 to 0x0063a000, Size: 2097152
l4lx | Main memory: virt: 0x00c00000 to 0x04bfffff [65536 KiB]
l4lx | Main memory: Number of physical regions: 1, 67108864 Bytes
l4lx | Main memory: 1: Phys: 0x02400000 to 0x06400000, Size: 67108864
l4lx | Filling lower ptabs...
l4lx | mainmem = c00000
usbhid | <6>input: QEMU 0.9.1 QEMU USB Mouse as /class/input/input0
usbhid | connect "QEMU 0.9.1 QEMU USB Mouse"
usbhid | <6>input: USB HID v0.01 Mouse [QEMU 0.9.1 QEMU USB Mouse] on
usb-ddeu
usbhid : sb_vhcd-1
l4lx | Done (1481 entries).
l4lx | l4env_register_pointer_section: addr = 006f6000 size = 1032192
l4lx | end: virt: 0x006f6000 to 0x007f1fff [1008 KiB]
l4lx | end: Number of physical regions: 1, 1032192 Bytes
l4lx | end: 1: Phys: 0x01b8b000 to 0x01c87000, Size: 1032192
l4lx | memory_setup done
l4lx | l4env_rd_path: drops.rd
l4lx | Loading: drops.rd
l4lx | INITRD: Size of RAMdisk is 16384KiB
l4lx | RAMdisk from 04c00000 to 05c00000 [16384KiB]
l4lx | l4lx_thread_create: Created thread 11.05 (timer.i0)
l4lx | Jumping over 4x 'hlt' at 0x729944
l4lx | idler0: utcb=0xbff00400 11.04
l4lx | l4lx_thread_create: Created thread 11.06 (idler0)
l4lx | Starting L4FB via DOpE
l4dope | SharedMem(alloc): hl.raw=100000, id=dc, size=96000
l4dope | SharedMem(get_adr): address = 0x800000
l4lx | l4lx_thread_create: Created thread 11.08 (DOpE refresher)
l4lx | l4lx_thread_create: Created thread 11.09 (L4DOpEinput)
usbcore | <6>usb 1-2: USB disconnect, address 2
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 14.
l4lx | l4lx_thread_create: Created thread 11.0a (IRQ14)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 15.
l4lx | l4lx_thread_create: Created thread 11.0b (IRQ15)
l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 11.
l4lx | l4lx_thread_create: Created thread 11.0c (IRQ11)
On Wed, Apr 29, 2009 at 3:42 PM, Neohtm <neohtm at gmail.com> wrote:
> Hi all,
>
> I tried to run the tudos-demo-cd.iso with qemu
> 'qemu -m 256 -cdrom tudos-demo-cd.iso -usbdevice mouse' and it's running
> perfectly with the usb mouse and keyboard.
>
> but when i tried on the one i'm compiled. the mouse and keyboard not
> functioning at all and returns a kernel panic.
>
> Please help.....
>
> Regards,
> neohtm
>
> Below are the output of the error.
>
>
> Welcome to Fiasco(ia32)!
> DD-L4(v2)/ia32 microkernel (C) 1998-2009 TU Dresden
> Rev: r438 compiled with gcc 4.3.2 for Intel Pentium []
> Performance-critical config option(s) detected:
> CONFIG_NDEBUG is off
> CONFIG_NO_FRAME_PTR is off
>
> Enabling special fully nested mode for PIC
> Using the PIT (i8254) on IRQ 0 for scheduling
> SERIAL ESC: allocated IRQ 4 for serial uart
> SERIAL ESC: allocated IRQ 4 for serial uart
> Not using serial hack in slow timer handler.
> Absolute KIP Syscalls using: Sysenter
> CPU: GenuineIntel (6:3:3:0) Model: Pentium II (Klamath) at 1795 MHz
>
> 32 KB L1 I Cache (8-way associative, 64 bytes per line)
> 32 KB L1 D Cache (8-way associative, 64 bytes per line)
> 2048 KB L2 U Cache (8-way associative, 64 bytes per line)
>
> Freeing init code/data: 24576 bytes (6 pages)
>
> Calibrating timer loop... done.
> SIGMA0: Hello!
> KIP @ 1000
> Found Fiasco: KIP syscalls: yes
> allocated 4KB for maintenance structures
>
>
> Roottask.
> Command line found: "(cd)/boot/l4/l4env/roottask task modname "loader"
> allow_cli task modname "bmodfs" attached 5 modules"
>
> 261695kB ( 255MB) total RAM (reported by bootloader)
> 234760kB ( 230MB) received RAM from Sigma0
> 34212kB ( 34MB) reserved RAM for RMGR
> Received I/O ports 0000-ffff
> Attached irqs = [ <!0> 1 <!2> 3 <!4> 5 6 7 8 9 A B C D E F 10 11 ]
>
> Roottask: Parsing command line config.
> configured task 0x00 (loader):
> vm_offs:0 irq:3ffff lmcp:ffff allow_cli:1 mcp:ff prio:10 small:ff
> mods:0
> configured task 0x00 (bmodfs):
> vm_offs:0 irq:3ffff lmcp:ffff allow_cli:0 mcp:ff prio:10 small:ff
> mods:5
>
> Roottask: Loading 17 modules.
> #05: loading "(cd)/boot/l4/l4env/events"
> from [0612e000-0616fe99] to [01540000-01549190][0154a000-0155f590]
> entry at 0005f374 via trampoline page code
> symbols at [0eb74000-0eb76000] (8kB), lines at [0eb6d000-0eb74000]
> (28kB)
> #06: loading "(cd)/boot/l4/l4env/names --events"
> from [06170000-061b1c12] to [002d0000-002d6a37][002d7000-002e2000]
> entry at 0006037c via trampoline page code
> symbols at [0eb6b000-0eb6d000] (8kB), lines at [0eb65000-0eb6b000]
> (24kB)
> #07: loading "(cd)/boot/l4/l4env/log"
> from [061b2000-061efd07] to [00400000-00406eca][00407000-00439808]
> entry at 00061370 via trampoline page code
> symbols at [0eb63000-0eb65000] (8kB), lines at [0eb5d000-0eb63000]
> (24kB)
> #08: loading "(cd)/boot/l4/l4env/dm_phys --isa=0x00800000"
> from [061f0000-0628a8b4] to [01500000-01513cb7][01514000-0151e000]
> entry at 00062384 via trampoline page code
> symbols at [0eb58000-0eb5d000] (20kB), lines at [0eb4a000-0eb58000]
> (56kB)
> #09: loading "(cd)/boot/l4/l4env/simple_ts -t 300"
> from [0628b000-062d8310] to [01400000-01408dea][01409000-014185e8]
> entry at 0006337c via trampoline page code
> symbols at [0eb48000-0eb4a000] (8kB), lines at [0eb40000-0eb48000]
> (32kB)
> #0a: loading "(cd)/boot/l4/l4env/rtc"
> from [062d9000-06308a5c] to [01080000-010845c0][01085000-0108a000]
> entry at 00064370 via trampoline page code
> symbols at [0eb3e000-0eb40000] (8kB), lines at [0eb39000-0eb3e000]
> (20kB)
> #0b: loading "(cd)/boot/l4/l4env/l4io"
> from [06309000-0654a391] to [00c20000-00c45315][00c46000-00cb4000]
> entry at 00066370 via trampoline page code
> symbols at [0eae3000-0eb39000] (344kB), lines at [0eac9000-0eae3000]
> (104kB)
> #0c: loading "(cd)/boot/l4/l4env/l4dope"
> from [0654b000-066c2384] to [01b00000-01b45ef1][01b46000-01b8b000]
> entry at 00067374 via trampoline page code
> symbols at [0eabb000-0eac9000] (56kB), lines at [0ea8d000-0eabb000]
> (184kB)
> #0d: loading "(cd)/boot/l4/usb/usbcore"
> from [066c3000-068faac1] to [008e0000-0092600d][00927000-0094c000]
> entry at 00068374 via trampoline page code
> symbols at [0ea81000-0ea8d000] (48kB), lines at [0ea4b000-0ea81000]
> (216kB)
> #0e: loading "(cd)/boot/l4/usb/usbhid"
> from [068fb000-06aa0604] to [01900000-0193e269][0193f000-01966000]
> entry at 00069370 via trampoline page code
> symbols at [0ea42000-0ea4b000] (36kB), lines at [0ea17000-0ea42000]
> (172kB)
> #0f: loading "(cd)/boot/l4/l4env/bmodfs"
> from [06aa1000-06b48f8d] to [01220000-01238689][01239000-01250000]
> passing module (cd)/boot/l4/cfg/l4linux26.cfg [
> 06b49000-06b49165 ]
> passing module (cd)/boot/l4/l4env/libloader.s.so [
> 06b4a000-06be8f11 ]
> passing module (cd)/boot/l4/l4env/libld-l4.s.so [
> 06be9000-06c62219 ]
> passing module (cd)/boot/l4/l4linux/vmlinuz [
> 06c63000-07019183 ]
> passing module (cd)/boot/l4/l4linux/drops.rd [
> 0701a000-0801a000 ]
> entry at 0006a46c via trampoline page code
> symbols at [0ea12000-0ea17000] (20kB), lines at [0e9ff000-0ea12000]
> (76kB)
> #10: loading "(cd)/boot/l4/l4env/loader --fprov=BMODFS l4linux26.cfg"
> from [0801a000-080f8b6d] to [01300000-013291c9][0132a000-01349000]
> entry at 0006b390 via trampoline page code
> symbols at [0e9f8000-0e9ff000] (28kB), lines at [0e9de000-0e9f8000]
> (104kB)
>
> ROOT: Sending ports 0070-0070 to task #0a
> ROOT: Sending ports 0080-0080 to task #0a
> ROOT: Sending ports 0071-0071 to task #0a
> names | Starting thread listening for `exit' events
> rtc | Date:29.04.2009 Time:07:33:01
> simplets| Configured for 300 tasks.
> loader | Can't map tbuf status page
> usbcore | main(): DDE USB CORE initiaizing:
> usbcore | main(): Initializing DDE base system.
> io | Using platform configuration 'x86'
> ROOT: Sending ports 0cfb-0cfb to task #0b
> ROOT: Sending ports 0cf8-0cfb to task #0b
> ROOT: Sending ports 0cfe-0cff to task #0b
> io | PCI: Using configuration type 1
> io | PCI: Probing PCI hardware
> io | PCI: Probing PCI hardware (bus 00)
> ROOT: Sending ports 0cfc-0cff to task #0b
> io | PCI: PIIX3: Enabling Passive Release on 00:01.0
> io | Limiting direct PCI/PCI transfers.
> io | Activating ISA DMA hang workarounds.
> io | 00000000-ffffffff : PCI mem
> io | f0000000-f1ffffff : Cirrus Logic GD 5446
> io | f2000000-f2000fff : Cirrus Logic GD 5446
> io | 0000-ffff : PCI IO
> io | 0cf8-0cff : PCI conf1
> io | b000-b03f : Intel Corporation 82371AB/EB/MB PIIX4 ACPI
> io | b100-b11f : Intel Corporation 82371AB/EB/MB PIIX4 ACPI
> io | c000-c00f : Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton
> II]
> io | c020-c03f : Intel Corporation 82371SB PIIX3 USB [Natoma/Triton
> II]
> io | c100-c1ff : Realtek Semiconductor Co., Ltd. RTL-8029(AS)
> bmodfs | Passed the following modules:
> bmodfs | module "(cd)/boot/l4/cfg/l4linux26.cfg" (1kB)
> bmodfs | module "(cd)/boot/l4/l4env/libloader.s.so" (636kB)
> bmodfs | module "(cd)/boot/l4/l4env/libld-l4.s.so" (485kB)
> bmodfs | module "(cd)/boot/l4/l4linux/vmlinuz" (3801kB)
> bmodfs | module "(cd)/boot/l4/l4linux/drops.rd" (16384kB)
> loader | sleeping for 1000 ms
> io | Available IRQs=[ <!0> 1 <!2> 3 <!4> 5 6 7 8 9 a b c d e f 10 11 ]
> l4dope | L4INPUT native mode activated
> l4dope | L4INPUT: !!! W A R N I N G !!!
> l4dope | L4INPUT: Please, do not use Fiasco's "-esc" with L4INPUT.
> l4dope | L4INPUT: !!! W A R N I N G !!!
> ROOT: Sending ports 0060-006f to task #0b
> l4dope | Failed to disable AUX port, but continuing anyway... Is this a
> SiS?
> l4dope | If AUX port is really absent please use the 'i8042.noaux' option.
> l4dope | serio: i8042 KBD port at 0x60,0x64 irq 1
> l4dope | input: AT Raw Set 2 keyboard on isa0060/serio0
> l4dope | input: PC Speaker
> l4dope | input: L4 input event injector
> l4dope | L4 input event injector: IRQ handler up
> l4dope | connect "AT Raw Set 2 keyboard", isa0060/serio0/input0
> l4dope | connect "PC Speaker", isa0061/input0
> l4dope | connect "L4 input event injector", l4/sys
> l4dope | SharedMem(alloc): hl.raw=100000, id=44, size=800
> l4dope | SharedMem(get_adr): address = 0x5000
> l4dope | SharedMem(alloc): hl.raw=100000, id=45, size=800
> l4dope | SharedMem(get_adr): address = 0x6000
> l4dope | SharedMem(alloc): hl.raw=100000, id=46, size=800
> l4dope | SharedMem(get_adr): address = 0x7000
> l4dope | SharedMem(alloc): hl.raw=100000, id=47, size=800
> l4dope | SharedMem(get_adr): address = 0xd000
> l4dope | SharedMem(alloc): hl.raw=100000, id=48, size=800
> l4dope | SharedMem(get_adr): address = 0xe000
> l4dope | SharedMem(alloc): hl.raw=100000, id=49, size=800
> l4dope | SharedMem(get_adr): address = 0xf000
> l4dope | SharedMem(alloc): hl.raw=100000, id=4b, size=800
> l4dope | SharedMem(get_adr): address = 0x16000
> usbcore | main(): Initializing DDE kmalloc.
> usbcore | main(): Initializing DDE process.
> usbcore | main(): Initializing DDE timers.
> usbhid | l4dde_mm_init(): Using ...
> usbhid | 16 kB at 0x00002000 (vmem)
> usbhid | 128 kB in 1 regions (kmem)
> l4dope | SharedMem(alloc): hl.raw=100000, id=55, size=484
> l4dope | SharedMem(get_adr): address = 0x20000
> l4dope | dope: paddr=f0000000 size=4096KiB
> l4dope | Mapped video memory at f0000000 to 00400000+000000 [4096kB] via
> L4IO
> l4dope | mapping: vaddr=0x400000 size=4194304(0x400000) offset=0(0x0)
> l4dope | Frame buffer base: 0x400000
> l4dope | Resolution: 1024x768x16
> l4dope | Bytes per scanline: 2048
> l4dope | Current video mode is 1024x768 red=11:5 green=5:6 blue=0:5
> res=0:0
> usbcore | main(): Initializing DDE softirq.
> usbcore | Softirq daemon starting
> usbcore | main(): Doing initcalls...
> usbcore | Initializing DDE page cache
> usbcore | <6>usbcore: registered new interface driver hub
> usbhid | register_chrdev(): called input
> usbhid | register_chrdev(): called usb
> usbhid | usb: registered new driver hub
> usbhid | usb: $Revision: 238 $ time 17:10:21 Apr 11 2009
> usbhid | usb: High bandwidth mode enabled
> io | PCI: Setting latency timer of device 00:01.2 to 64
> usbhid |
> /home/user/Desktop/tudos/l4/pkg/usbhid/server/lib-linux/contrib/usb/h
> usbhid : ost/usb-uhci.c: USB UHCI at I/O 0xc020, IRQ 9
> ROOT: Sending ports c030-c031 to task #0e
> ROOT: Sending ports c032-c033 to task #0e
> ROOT: Sending ports c034-c035 to task #0e
> usbhid | usb: Detected 2 ports
> ROOT: Cannot send port c030 to task #0b, owner is #0e
> io | [B.2] l4io/server/src/res.c:414:l4_io_request_region_component():
> io | sigma0 request for I/O ports [c020,c040) failed (err=0 dw1=0)
> io |
>
> --PANIC, 'g' for exit------------------------------------IP:
> 00c21185
> [io] (b.02) jdb:
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://os.inf.tu-dresden.de/pipermail/l4-hackers/attachments/20090429/5bf39f32/attachment.htm>
More information about the l4-hackers
mailing list