How to start 2 or more VMs

[Chao-Jui Chang]

Hi Ganis Zulfa,

You need to setup one ethX for each l4linux.
When you start 2 L4Linuxes, you will only see one ethX in current console,
because
you are connected to the second L4Linux not the first one.
It is normal to see only one ethX.

One way to setup the ip of first L4Linux is to write the init config in
/etc/init.d/rcS.
In this case, you need 2 ramdisk for each L4Linux.

Here is my config for first L4Linux:
# cat /etc/init.d/rcS

> #! /bin/sh
> mount -t proc proc /proc
> mount -t devtmpfs devtmpfs /dev
> mkdir /dev/pts
> mount -t devpts devpts /dev/pts
> ifconfig lo up
> ifconfig eth0 192.168.50.1
> telnetd -l /bin/sh
> exit 0

For second L4Linux, just change the ip to 192.168.50.2

After 2 L4Linuxes start, you will be in second L4Linux(192.168.50.2)
then, you can telnet 192.168.50.1 to go to another L4Linux.

Cheers,
Chao-Jui


2013/4/16 Ganis Zulfa Santoso <ganiszulfa at gmail.com>

> Hi Chao-Jui, have u figured out a way to do what Adam said?
>
> I followed the instructions from http://wiki.tudos.org/L4Linux/shmnet,
> but I have problems:
>
> A. i ran two l4linux arms but i only found one ethX
>
> B. how do i set up the ip of another l4linux arm?
>
> thanks.
>
>
> Best regards,
>
>
> Ganis Zulfa Santoso
>
>
> On Mon, Apr 8, 2013 at 7:03 AM, Adam Lackorzynski <
> adam at os.inf.tu-dresden.de> wrote:
>
>> Hi,
>>
>> On Fri Apr 05, 2013 at 13:29:37 +0800, Chao-Jui Chang wrote:
>> > Is it possible to multiplex multiple text-based console?
>> > I want to try to start multiple VMs on ARM board which only provides
>> serial
>> > console.
>>
>> You can connect two L4Linuxes using a l4shmnet-based local network
>> connection, so you can go from one to the other via e.g. telnet or ssh.
>>
>>
>> Adam
>> --
>> Adam                 adam at os.inf.tu-dresden.de
>>   Lackorzynski         http://os.inf.tu-dresden.de/~adam/
>>
>> _______________________________________________
>> l4-hackers mailing list
>> l4-hackers at os.inf.tu-dresden.de
>> http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://os.inf.tu-dresden.de/pipermail/l4-hackers/attachments/20130418/19218dd4/attachment.htm>