l4android compilation issue
cem akpolat
akpolatcem at gmail.com
Thu Jul 24 10:17:42 CEST 2014
Dear Matthias,
Thank you first of all for the hint about multiboot.bin. That was an issue
in qemu-2.0.0, therefore I downgraded my version to 1.7.1. Now
lx_ginger.iso works fine.
Sincerely,
Cem
Cem Akpolat
On Wed, Jul 23, 2014 at 5:22 PM, Matthias Lange <
matthias.lange at kernkonzept.com> wrote:
> From the output below, I can see that the multiboot.bin grub emulation is
> missing. I have something like this
>
> Running option rom at ca80:0003
> Searching bootorder for: /pci at i0cf8/*@3
> Searching bootorder for: /rom at genroms/multiboot.bin
> Searching bootorder for: /rom at genroms/kvmvapic.bin
> Searching bootorder for: HALT
> Running option rom at cb00:0003
>
> and later
>
> Booting from ROM...
> Booting from ca80:003c
> VBE mode info request: 117
> VBE mode set: 4117
> set VGA mode 117
>
> I can only guess that this is the reason why the framebuffer driver cannot
> find the VBE bios.
>
> Matthias.
>
> On Wed, Jul 23, 2014 at 05:10:38PM +0200, cem akpolat wrote:
> > Hi,
> >
> > here is the output on the console after calling the command as you
> > mentioned:
> >
> > akpolat at akpolatX240:~/Desktop$ qemu-system-x86_64 -cdrom lx_ginger.iso
> > -boot d -m 512 -chardev stdio,id=seabios -device
> > isa-debugcon,iobase=0x402,chardev=seabios -serial stdio
> >
> >
> > Start bios (version 1.7.4-20140219_122725-roseapple)
> > No Xen hypervisor found.
> > Running on QEMU (i440fx)
> > RamSize: 0x20000000 [cmos]
> > Relocating init from 0x000dfe99 to 0x1ffdf190 (size 69036)
> > Found QEMU fw_cfg
> > RamBlock: addr 0x0000000000000000 len 0x0000000020000000 [e820]
> > CPU Mhz=2763
> > === PCI bus & bridge init ===
> > PCI: pci_bios_init_bus_rec bus = 0x0
> > === PCI device probing ===
> > Found 6 PCI devices (max PCI bus is 00)
> > === PCI new allocation pass #1 ===
> > PCI: check devices
> > === PCI new allocation pass #2 ===
> > PCI: 32: 0000000080000000 - 00000000fec00000
> > PCI: map device bdf=00:03.0 bar 1, addr 0000c000, size 00000040 [io]
> > PCI: map device bdf=00:01.1 bar 4, addr 0000c040, size 00000010 [io]
> > PCI: map device bdf=00:03.0 bar 6, addr feb80000, size 00040000 [mem]
> > PCI: map device bdf=00:03.0 bar 0, addr febc0000, size 00020000 [mem]
> > PCI: map device bdf=00:02.0 bar 6, addr febe0000, size 00010000 [mem]
> > PCI: map device bdf=00:02.0 bar 1, addr febf0000, size 00001000 [mem]
> > PCI: map device bdf=00:02.0 bar 0, addr fc000000, size 02000000
> [prefmem]
> > PCI: init bdf=00:00.0 id=8086:1237
> > PCI: init bdf=00:01.0 id=8086:7000
> > PIIX3/PIIX4 init: elcr=00 0c
> > PCI: init bdf=00:01.1 id=8086:7010
> > PCI: init bdf=00:01.3 id=8086:7113
> > Using pmtimer, ioport 0xb008
> > PCI: init bdf=00:02.0 id=1013:00b8
> > PCI: init bdf=00:03.0 id=8086:100e
> > PCI: Using 00:02.0 for primary VGA
> > Found 1 cpu(s) max supported 1 cpu(s)
> > MP table addr=0x000f0b70 MPC table addr=0x000f0b80 size=208
> > SMBIOS ptr=0x000f0b50 table=0x000f0a10 size=307
> > Scan for VGA option rom
> > Running option rom at c000:0003
> > Start SeaVGABIOS (version 1.7.4-20140219_122730-roseapple)
> > enter vga_post:
> > a=00000010 b=0000ffff c=00000000 d=0000ffff ds=0000 es=f000 ss=0000
> > si=00000000 di=00006580 bp=00000000 sp=00006d1a cs=f000 ip=d256 f=0000
> > cirrus init
> > cirrus init 2
> > Attempting to allocate VGA stack via pmm call to f000:d2ce
> > pmm call arg1=0
> > VGA stack allocated at ed790
> > Turning on vga text mode console
> > set VGA mode 3
> > cirrus mode switch regular
> > SeaBIOS (version 1.7.4-20140219_122725-roseapple)
> > Found 1 lpt ports
> > Found 1 serial ports
> > Searching bootorder for: /pci at i0cf8/isa at 1/fdc at 03f0/floppy at 0
> > ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
> > ATA controller 2 at 170/374/0 (irq 15 dev 9)
> > DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD]
> > Searching bootorder for: /pci at i0cf8/*@1,1/drive at 1/disk at 0
> > PS2 keyboard initialized
> > All threads complete.
> > Scan for option roms
> > Running option rom at c900:0003
> > pmm call arg1=1
> > pmm call arg1=0
> > pmm call arg1=1
> > pmm call arg1=0
> > Searching bootorder for: /pci at i0cf8/*@3
> > Searching bootorder for: /rom at genroms/kvmvapic.bin
> > Searching bootorder for: HALT
> > Running option rom at ca00:0003
> > Space available for UMB: cc800-ec800, f0000-f0930
> > Returned 57344 bytes of ZoneHigh
> > e820 map has 6 items:
> > 0: 0000000000000000 - 000000000009fc00 = 1 RAM
> > 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
> > 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
> > 3: 0000000000100000 - 000000001fffe000 = 1 RAM
> > 4: 000000001fffe000 - 0000000020000000 = 2 RESERVED
> > 5: 00000000fffc0000 - 0000000100000000 = 2 RESERVED
> > enter handle_19:
> > NULL
> > Booting from DVD/CD...
> > Booting from 0000:7c00
> >
> > Welcome to Fiasco.OC (ia32)!
> > L4/Fiasco.OC ia32 microkernel (C) 1998-2011 TU Dresden
> > Rev: r30 compiled with gcc 4.4.3 for Intel Pentium [.up]
> > Build: #32 Tue Feb 15 10:07:33 CET 2011
> >
> > Performance-critical config option(s) detected:
> > CONFIG_NDEBUG is off
> > CONFIG_NO_FRAME_PTR is off
> >
> > Superpages: yes
> > Kmem:: cpu page at 1fff8000 (4096Bytes)
> > Enabling SVM support
> > NASID: 0x10
> > ACPI-Init
> > ACPI: RSDP = 0xf09e0 pRSDT = 1ffffbc1 pXSDT = 0
> > ACPI: OEM: BOCHS
> > MADT = 0x203ffb11
> > IO-APIC[ 0]: struct: 0x203ffb45 adr=fec00000
> > IO-APIC[ 0]: pins 23
> > PIN[ 0m]: vector=20, del=0, dm=physical, dest=0 (high, edge)
> > PIN[ 1m]: vector=21, del=0, dm=physical, dest=0 (high, edge)
> > PIN[ 2m]: vector=22, del=0, dm=physical, dest=0 (high, edge)
> > PIN[ 3m]: vector=23, del=0, dm=physical, dest=0 (high, edge)
> > PIN[ 4m]: vector=24, del=0, dm=physical, dest=0 (high, edge)
> > PIN[ 5m]: vector=25, del=0, dm=physical, dest=0 (high, edge)
> > PIN[ 6m]: vector=26, del=0, dm=physical, dest=0 (high, edge)
> > PIN[ 7m]: vector=27, del=0, dm=physical, dest=0 (high, edge)
> > PIN[ 8m]: vector=28, del=0, dm=physical, dest=0 (high, edge)
> > PIN[ 9m]: vector=29, del=0, dm=physical, dest=0 (high, edge)
> > PIN[10m]: vector=2a, del=0, dm=physical, dest=0 (high, edge)
> > PIN[11m]: vector=2b, del=0, dm=physical, dest=0 (high, edge)
> > PIN[12m]: vector=2c, del=0, dm=physical, dest=0 (high, edge)
> > PIN[13m]: vector=2d, del=0, dm=physical, dest=0 (high, edge)
> > PIN[14m]: vector=2e, del=0, dm=physical, dest=0 (high, edge)
> > PIN[15m]: vector=2f, del=0, dm=physical, dest=0 (high, edge)
> > PIN[16m]: vector=30, del=0, dm=physical, dest=0 (high, edge)
> > PIN[17m]: vector=31, del=0, dm=physical, dest=0 (high, edge)
> > PIN[18m]: vector=32, del=0, dm=physical, dest=0 (high, edge)
> > PIN[19m]: vector=33, del=0, dm=physical, dest=0 (high, edge)
> > PIN[20m]: vector=34, del=0, dm=physical, dest=0 (high, edge)
> > PIN[21m]: vector=35, del=0, dm=physical, dest=0 (high, edge)
> > PIN[22m]: vector=36, del=0, dm=physical, dest=0 (high, edge)
> > PIN[23m]: vector=37, del=0, dm=physical, dest=0 (high, edge)
> > IO-APIC: dual 8259: yes
> > IO-APIC: ovr[ 0] 00 -> 2
> > IO-APIC: ovr[ 1] 05 -> 5
> > IO-APIC: ovr[ 2] 09 -> 9
> > IO-APIC: ovr[ 3] 0a -> a
> > IO-APIC: ovr[ 4] 0b -> b
> > Allocate cpu_mem @ 0xfeff6000
> > Local APIC[00]: version=11 max_lvt=5
> > APIC ESR value before/after enabling: 00000000/00000000
> > Using the Local APIC timer on vector 90 (Periodic Mode) for scheduling
> > SERIAL ESC: allocated IRQ 4 for serial uart
> > SERIAL ESC: allocated IRQ 4 for serial uart
> > Not using serial hack in slow timer handler.
> > Absolute KIP Syscalls using: Sysenter
> > CPU[0:0]: AuthenticAMD (6:6:3:0)[00000663] Model: Athlon (Palomino) at
> 2694
> > MHz
> >
> > 255/512 Entry I TLB (4K pages) 255 Entry I TLB (4M pages)
> > 255/512 Entry D TLB (4K pages) 255 Entry D TLB (4M pages)
> > 64 KB L1 I Cache (2-way associative, 64 bytes per line)
> > 64 KB L1 D Cache (2-way associative, 64 bytes per line)
> > 512 KB L2 U Cache (8-way associative, 64 bytes per line)
> >
> > Freeing init code/data: 28672 bytes (7 pages)
> >
> > VMX: Not supported
> > Calibrating timer loop... done.
> > SIGMA0: Hello!
> > KIP @ 400000
> > Found Fiasco: KIP syscalls: yes
> > allocated 4KB for maintenance structures
> > SIGMA0: Dump of all resource maps
> > RAM:------------------------
> > [0:1000;9efff]
> > [0:10c000;13ffff]
> > [4:140000;18ffff]
> > [0:190000;2dbfff]
> > [4:2dc000;2dcfff]
> > [0:2dd000;3fffff]
> > [0:469000;137dfff]
> > [4:137e000;7883fff]
> > [0:7884000;1d70ffff]
> > IOMEM:----------------------
> > [0:0;fff]
> > [0:9f000;fffff]
> > [0:1fffe000;febfffff]
> > [0:fec01000;fedfffff]
> > [0:fee01000;ffffffff]
> > IO PORTS--------------------------
> > [0:0;fffffff]
> > MOE: Hello world
> > MOE: found 377736 KByte free memory
> > MOE: found RAM from 1000 to 1d710000
> > MOE: allocated 471 KByte for the page array @0x1000
> > MOE: virtual user address space [0-bfffffff]
> > MOE: rom name space cap -> [C:501000]
> > BOOTFS: [137e000-146d25c] [C:503000] l4re
> > BOOTFS: [146e000-165555b] [C:504000] ned
> > BOOTFS: [1656000-1ea917f] [C:505000] io
> > BOOTFS: [1eaa000-1f82d39] [C:506000] rtc
> > BOOTFS: [1f83000-22812f8] [C:507000] mag
> > BOOTFS: [2282000-23d7cf5] [C:508000] fb-drv
> > BOOTFS: [908a000-908a83b] [C:509000] lx_ginger.cfg
> > BOOTFS: [9064000-90643b7] [C:50a000] x86-legacy.devs
> > BOOTFS: [9080000-908086f] [C:50b000] x86_android.vbus
> > BOOTFS: [23d8000-28179f3] [C:50c000] vmlinuz.android
> > BOOTFS: [2818000-2912000] [C:50d000] root-x86-ginger.img
> > BOOTFS: [2913000-7884000] [C:50e000] system-x86-ginger.img
> > MOE: cmdline: moe rom/lx_ginger.cfg
> > MOE: Starting: rom/ned rom/lx_ginger.cfg
> > MOE: loading 'rom/ned'
> > Ned says: Hi World!
> > Ned: loading file: 'rom/lx_ginger.cfg'
> > io | Io service
> > io | Hello from L4-ACPICA
> > io | Find root Pointer
> > io | AcpiOsMapMemory(40e, 2) = 40040e
> > io | AcpiOsMapMemory(9fc00, 400) = 49fc00
> > io | AcpiOsMapMemory(e0000, 20000) = 4e0000
> > io | Find root Pointer: f09e0
> > io | AcpiOsMapMemory(f09e0, 24) = 4f09e0
> > io | ACPI: RSDP 0xf09e0 00014 (v00 BOCHS )
> > io | AcpiOsMapMemory(1ffffbc1, 24) = bffbc1
> > io | ACPI: RSDT 0x1ffffbc1 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC
> > 00000001)
> > io | AcpiOsMapMemory(1ffffbc1, 34) = bffbc1
> > io | AcpiOsMapMemory(1ffff1c0, 24) = bff1c0
> > io | ACPI: FACP 0x1ffff1c0 00074 (v01 BOCHS BXPCFACP 00000001 BXPC
> > 00000001)
> > io | AcpiOsMapMemory(1ffff1c0, 74) = bff1c0
> > io | AcpiOsMapMemory(1fffe040, 24) = bfe040
> > io | ACPI: DSDT 0x1fffe040 01180 (v01 BOCHS BXPCDSDT 00000001 BXPC
> > 00000001)
> > io | AcpiOsMapMemory(1fffe000, 24) = bfe000
> > io | ACPI: FACS 0x1fffe000 00040
> > io | AcpiOsMapMemory(1ffff234, 24) = bff234
> > io | ACPI: SSDT 0x1ffff234 008DD (v01 BOCHS BXPCSSDT 00000001 BXPC
> > 00000001)
> > io | AcpiOsMapMemory(1ffffb11, 24) = bffb11
> > io | ACPI: APIC 0x1ffffb11 00078 (v01 BOCHS BXPCAPIC 00000001 BXPC
> > 00000001)
> > io | AcpiOsMapMemory(1ffffb89, 24) = bffb89
> > io | ACPI: HPET 0x1ffffb89 00038 (v01 BOCHS BXPCHPET 00000001 BXPC
> > 00000001)
> > io | AcpiOsMapMemory(1fffe040, 1180) = bfe040
> > io | Parsing all Control Methods:
> > io | Table [DSDT](id 0001) - 144 Objects with 18 Devices 52 Methods
> 8
> > Regions
> > io | AcpiOsMapMemory(1ffff234, 8dd) = bff234
> > io | Parsing all Control Methods:
> > io | Table [SSDT](id 0002) - 155 Objects with 32 Devices 42 Methods
> 1
> > Regions
> > io | tbxface-0601 [02] TbLoadNamespace : ACPI Tables
> > successfully acquired
> > io | enable ACPI subsystem
> > io | evxfevnt-0184 [02] Enable : Transition to ACPI
> > mode successful
> > io | AcpiOsMapMemory(1fffe000, 40) = bfe000
> > io | evgpeblk-1129 [04] EvCreateGpeBlock : GPE 00 to 0F [_GPE]
> 2
> > regs on int 0x9
> > io |
> >
> /home/mlange/projects/l4re/src/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:57:AcpiOsInstallInterruptHandler:
> > UNINPLEMENTED
> > io | initialize ACPI objects
> > io | Completing Region/Field/Buffer/Package
> > initialization:.....................................
> > io | Initialized 9/9 Regions 2/2 Fields 21/21 Buffers 5/5 Packages
> > (308 nodes)
> > io | Initializing Device/Processor/Thermal objects by executing _INI
> > methods:
> > io | Executed 0 _INI methods requiring 1 _STA executions (examined
> 53
> > objects)
> > io | evgpeblk-1234 [03] EvInitializeGpeBlock : Found 0 Wake,
> Enabled
> > 16 Runtime GPEs in this block
> > io | Interpreter enabled
> > io | scanning for PCI root bridge
> > io | Found PCI root bridge...
> > io | Using IOAPIC for interrupt routing
> > io | ACPICA-Version:20091214, System in ACPI MODE, 32bit timer
> > io | WARNING: phys mmio resource allocation failed
> > io | IOMEM * [000000000a0000-000000000bffff 20000] non-pref (32bit)
> > (align=1ffff flags=c002)
> > io | WARNING: phys mmio resource allocation failed
> > io | IOMEM * [000000000a0000-000000000bffff 20000] non-pref (32bit)
> > (align=1ffff flags=c002)
> > io | IGNORE ACPI RES: 1
> > io | WARNING: phys mmio resource allocation failed
> > io | IOMEM [000000000c0000-000000000fffff 40000] non-pref (32bit)
> > (align=3ffff flags=c002)
> > io | WARNING: phys mmio resource allocation failed
> > io | IOMEM [000000000c0000-000000000fffff 40000] non-pref (32bit)
> > (align=3ffff flags=c002)
> > io | WARNING: phys mmio resource allocation failed
> > io | IOMEM [0000000009f000-0000000009ffff 1000] non-pref (32bit)
> > (align=fff flags=c002)
> > io | WARNING: phys mmio resource allocation failed
> > io | IOMEM [0000000009f000-0000000009ffff 1000] non-pref (32bit)
> > (align=fff flags=c002)
> > io | WARNING: phys mmio resource allocation failed
> > io | IOMEM [00000000000000-00000000000fff 1000] non-pref (32bit)
> > (align=fff flags=c002)
> > io | WARNING: phys mmio resource allocation failed
> > io | IOMEM [00000000000000-00000000000fff 1000] non-pref (32bit)
> > (align=fff flags=c002)
> > io | WARNING: phys mmio resource allocation failed
> > io | IOMEM [000000000a0000-000000000bffff 20000] non-pref (32bit)
> > (align=1ffff flags=c002)
> > io | WARNING: phys mmio resource allocation failed
> > io | IOMEM [000000000a0000-000000000bffff 20000] non-pref (32bit)
> > (align=1ffff flags=c002)
> > io | WARNING: device 'PS2' already assigned to an other virtual bus.
> > io | WARNING: device 'S18_' already assigned to an other virtual
> bus.
> > io | Service registration failed: 'froyo_bus'
> > io | Ready. Waiting for request.
> > mag | Hello from MAG
> > fb | Trying execution of ``set VBE mode'' using x86emu
> > fb | VBE BIOS not present.
> > fb | Failed to setup Framebuffer
> > mag | Error: Exception: Void capability invoked: requesting goos
> info:
> > backtrace ...
> > mag | 1002e2f
> > mag | 103f4a5
> > mag | 1000dcb
> > mag | 10026de
> > mag | 105390c
> > mag | 10000e1
> > mag |
> > mag | MAG: destroy FB svc
> > Ned[lua]: Hm, cpapbility 436000 does not support the meta protocol: -2004
> > Ned: ERROR: rom/lx_ginger.cfg:82: attempt to call method 'create' (a nil
> > value)
> > rtc | Date:23.07.2014 Time:15:08:55
> >
> >
> > ====
> >
> > Cheers,
> > Cem
> >
> >
> >
> > Cem Akpolat
> >
> >
> > On Wed, Jul 23, 2014 at 4:49 PM, Matthias Lange <
> > matthias.lange at kernkonzept.com> wrote:
> >
> > > On Tue, Jul 22, 2014 at 10:16:19AM +0200, cem akpolat wrote:
> > > > Hi,
> > > >
> > > > I tested the image on another laptop older than mine, the only thing
> > > that I
> > > > have seen is "hacked by SECT". The whole problem can rely on my
> laptop. I
> > > > have to figure out it. But should I see also android gingerbread
> > > interface
> > > > right after this hacked by SECT.
> > >
> > > Ok, I understand. The system seems to stop booting in the framebuffer
> > > driver
> > > (mag gets not started). This indicates that the framebuffer driver is
> stuck
> > > emulating the 16bit VESA bios code. Newer versions of that bios try
> writing
> > > debug information through an IO port. Can you try adding the following
> > > line to
> > > the VGA device in your x86-legacy.devs
> > >
> > > Res.io(0x402, 0x402);
> > >
> > > and see if it works? You can also append the following cmdline to qemu
> to
> > > see
> > > the output
> > >
> > > -chardev stdio,id=seabios -device
> > > isa-debugcon,iobase=0x402,chardev=seabios
> > >
> > > Matthias.
> > >
> > > >
> > > > Cheers,
> > > > Cem
> > > >
> > > >
> > > > Cem Akpolat
> > > >
> > > >
> > > > On Tue, Jul 22, 2014 at 10:07 AM, cem akpolat <akpolatcem at gmail.com>
> > > wrote:
> > > >
> > > > > Hi,
> > > > >
> > > > > That was just an example for l4linux. I meant when I use l4linux
> > > instead
> > > > > of l4android, I can see root file system, because it is added in
> the
> > > module
> > > > > list. But here I reach up to this level, I can't even see the log
> of
> > > > > l4android or root file system, it does nothing after arriving to
> that
> > > > > point. You can also again see the log output below. By the way,
> Qemu
> > > > > version is 2.0.0. Lua congfig file and module list are written in
> the
> > > > > previous mail.
> > > > >
> > > > > kpolat at akpolatX240:~/mysvn/l4android/l4android_x86/src/src/l4$
> make
> > > qemu
> > > > > E=l4_gingerbread O=build
> > > > >
> > >
> '/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/vmlinuz.android'
> > > > > is a zipped file, uncompressing to
> '/tmp/Ybip9Ajla7/vmlinuz.android'
> > > > > Note: At least QEmu 0.13 is required for the loading to work.
> > > > > qemu-system-i386 -kernel
> > > > >
> > >
> /home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/bootstrap
> > > > > -append "bootstrap -modaddr 0x01100000" -initrd
> > > > >
> > >
> "/home/akpolat/mysvn/l4android/l4android_x86/src/src/kernel/fiasco/build//fiasco
> > > > >
> > >
> -serial_esc,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/sigma0
> > > > >
> > >
> ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/moe
> > > > >
> > >
> rom/lx_ginger.cfg,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/l4re
> > > > >
> > >
> ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/ned
> > > > >
> > >
> ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/io
> > > > >
> > >
> ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/rtc
> > > > >
> > >
> ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/mag
> > > > >
> > >
> ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/fb-drv
> > > > >
> > >
> ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/conf/android_conf/lx_ginger.cfg
> > > > >
> > >
> ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/conf/android_conf/x86-legacy.devs
> > > > >
> > >
> ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/conf/android_conf/x86_android.vbus
> > > > > ,/tmp/Ybip9Ajla7/vmlinuz.android
> > > > >
> > >
> ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/root-x86-ginger.img
> > > > >
> > >
> ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/system-x86-ginger.img
> > > > > " -serial stdio -m 3000
> > > > >
> > > > > L4 Bootstrapper
> > > > > Build: #1 Mo 21. Jul 18:54:56 CEST 2014, x86-32, 4.8.2
> > > > > RAM: 0000000000000000 - 000000000009fbff: 639kB
> > > > > RAM: 0000000000100000 - 00000000bb7fdfff: 3070968kB
> > > > > Total RAM: 2999MB
> > > > > Moving up to 15 modules behind 1100000
> > > > > moving module 00 { 2e5000-350c3f } -> { 7d51000-7dbcc3f }
> [441408]
> > > > > moving module 01 { 351000-3a4c48 } -> { 7dbd000-7e10c48 }
> [343113]
> > > > > moving module 02 { 3a5000-5e6a68 } -> { 7e11000-8052a68 }
> [2366057]
> > > > > moving module 03 { 5e7000-716a82 } -> { 6f36000-7065a82 }
> [1243779]
> > > > > moving module 04 { 717000-96517b } -> { 7066000-72b417b }
> [2417020]
> > > > > moving module 05 { 966000-147138f } -> { 8053000-8b5e38f }
> [11580304]
> > > > > moving module 06 { 1472000-15778b8 } -> { 1100000-12058b8 }
> [1071289]
> > > > > moving module 07 { 1578000-199efcd } -> { 1206000-162cfcd }
> [4353998]
> > > > > moving module 08 { 199f000-1b18ebd } -> { 162d000-17a6ebd }
> [1547966]
> > > > > moving module 09 { 1b19000-1b19839 } -> { 17a7000-17a7839 }
> [2106]
> > > > > moving module 10 { 1b1a000-1b1a4a3 } -> { 17a8000-17a84a3 }
> [1188]
> > > > > moving module 11 { 1b1b000-1b1b86e } -> { 17a9000-17a986e }
> [2159]
> > > > > moving module 12 { 1b1c000-1ecae46 } -> { 17aa000-1b58e46 }
> [3862087]
> > > > > moving module 13 { 1ecb000-1fc4fff } -> { 1b59000-1c52fff }
> [1024000]
> > > > > moving module 14 { 1fc5000-6f35fff } -> { 1c53000-6bc3fff }
> > > [83300352]
> > > > > moving module 03 { 6f36000-7065a82 } -> { 6bc4000-6cf3a82 }
> [1243779]
> > > > > moving module 04 { 7066000-72b417b } -> { 6cf4000-6f4217b }
> [2417020]
> > > > > moving module 05 { 8053000-8b5e38f } -> { 6f43000-7a4e38f }
> > > [11580304]
> > > > > Scanning
> > > > >
> > >
> /home/akpolat/mysvn/l4android/l4android_x86/src/src/kernel/fiasco/build//fiasco
> > > > > -serial_esc
> > > > > Scanning
> > > > >
> > >
> /home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/sigma0
> > > > > Scanning
> > > > >
> > >
> /home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/moe
> > > > > rom/lx_ginger.cfg
> > > > > Bootloader MMAP:
> > > > > [ 0, 9fc00) RAM (1)
> > > > > [ 9fc00, a0000) reserved (2)
> > > > > [ f0000, 100000) reserved (2)
> > > > > [ 100000, bb7fe000) RAM (1)
> > > > > [ bb7fe000, bb800000) reserved (2)
> > > > > [ fffc0000, 100000000) reserved (2)
> > > > > Relocated mbi to [0x2dd000-0x2dd63f]
> > > > > Loading ndroid/l4android_x86/src/src/kernel/fiasco/build//fiasco
> > > > > Loading id/l4android_x86/src/src/l4/build/bin/x86_586/l4f/sigma0
> > > > > Loading droid/l4android_x86/src/src/l4/build/bin/x86_586/l4f/moe
> > > > > find kernel info page...
> > > > > found kernel info page at 0x400000
> > > > > Regions of list 'regions'
> > > > > [ 0, fff] { 1000} Arch BIOS
> > > > > [ 9fc00, 9ffff] { 400} Arch BIOS
> > > > > [ f0000, fffff] { 10000} Arch BIOS
> > > > > [ 100000, 10b197] { b198} Sigma0
> > > > > id/l4android_x86/src/src/l4/build/bin/x86_586/l4f/sigma0
> > > > > [ 140000, 18e21f] { 4e220} Root
> > > > > droid/l4android_x86/src/src/l4/build/bin/x86_586/l4f/moe
> > > > > [ 2d0000, 2e34a7] { 134a8} Boot bootstrap
> > > > > [ 2dd000, 2dd73c] { 73d} Root Multiboot info
> > > > > [ 300000, 38ffff] { 90000} Kern
> > > > > ndroid/l4android_x86/src/src/kernel/fiasco/build//fiasco
> > > > > [ 400000, 471fff] { 72000} Kern
> > > > > ndroid/l4android_x86/src/src/kernel/fiasco/build//fiasco
> > > > > [ 1100000, 7a4e38f] { 694e390} Root Module
> > > > > [ bb7fe000, bb7fffff] { 2000} Arch BIOS
> > > > > [ fffc0000, ffffffff] { 40000} Arch BIOS
> > > > > API Version: (87) experimental
> > > > > Sigma0 config ip:00100218 sp:002e1040
> > > > > Roottask config ip:001401f6 sp:00000000
> > > > > Starting kernel
> > > ndroid/l4android_x86/src/src/kernel/fiasco/build//fiasco
> > > > > at 003007b0
> > > > >
> > > > > Welcome to Fiasco.OC (ia32)!
> > > > > L4/Fiasco.OC ia32 microkernel (C) 1998-2012 TU Dresden
> > > > > Rev: UNKNOWN compiled with gcc 4.8.2 for Intel Pentium []
> > > > > Build: #1 Mo 21. Jul 18:56:08 CEST 2014
> > > > >
> > > > > Performance-critical config option(s) detected:
> > > > > CONFIG_NDEBUG is off
> > > > > CONFIG_NO_FRAME_PTR is off
> > > > >
> > > > > Superpages: yes
> > > > > Kmem:: cpu page at bb3e2000 (4096Bytes)
> > > > > ACPI-Init
> > > > > ACPI: RSDP[0xf09e0] r00 OEM:BOCHS.
> > > > > Boot_alloc: size=0x10
> > > > > Boot_alloc: allocated extra memory block @0xfffe5000 (size=400)
> > > > > Boot_alloc: @ 0xfffe5000
> > > > > Boot_alloc: remaining free block @ 0xfffe5010 (size=3f0)
> > > > > ACPI: RSDT[0x203ffbc1] r01 OEM:BOCHS. OEMTID:BXPCRSDT
> > > > > ACPI: FACP[0x203ff1c0] r01 OEM:BOCHS. OEMTID:BXPCFACP
> > > > > ACPI: SSDT[0x203ff234] r01 OEM:BOCHS. OEMTID:BXPCSSDT
> > > > > ACPI: APIC[0x203ffb11] r01 OEM:BOCHS. OEMTID:BXPCAPIC
> > > > > ACPI: HPET[0x203ffb89] r01 OEM:BOCHS. OEMTID:BXPCHPET
> > > > > IO-APIC: MADT = 0x203ffb11
> > > > > IO-APIC[ 0]: struct: 0x203ffb45 adr=fec00000
> > > > > Boot_alloc: size=0x1c
> > > > > Boot_alloc: @ 0xfffe5010
> > > > > Boot_alloc: remaining free block @ 0xfffe5030 (size=3d0)
> > > > > Boot_alloc: size=0x120
> > > > > Boot_alloc: @ 0xfffe5030
> > > > > Boot_alloc: remaining free block @ 0xfffe5150 (size=2b0)
> > > > > IO-APIC[ 0]: pins 24
> > > > > PIN[ 0m]: vector=20, del=0, dm=physical, dest=0 (high, edge)
> > > > > PIN[ 1m]: vector=21, del=0, dm=physical, dest=0 (high, edge)
> > > > > PIN[ 2m]: vector=22, del=0, dm=physical, dest=0 (high, edge)
> > > > > PIN[ 3m]: vector=23, del=0, dm=physical, dest=0 (high, edge)
> > > > > PIN[ 4m]: vector=24, del=0, dm=physical, dest=0 (high, edge)
> > > > > PIN[ 5m]: vector=25, del=0, dm=physical, dest=0 (high, edge)
> > > > > PIN[ 6m]: vector=26, del=0, dm=physical, dest=0 (high, edge)
> > > > > PIN[ 7m]: vector=27, del=0, dm=physical, dest=0 (high, edge)
> > > > > PIN[ 8m]: vector=28, del=0, dm=physical, dest=0 (high, edge)
> > > > > PIN[ 9m]: vector=29, del=0, dm=physical, dest=0 (high, edge)
> > > > > PIN[10m]: vector=2a, del=0, dm=physical, dest=0 (high, edge)
> > > > > PIN[11m]: vector=2b, del=0, dm=physical, dest=0 (high, edge)
> > > > > PIN[12m]: vector=2c, del=0, dm=physical, dest=0 (high, edge)
> > > > > PIN[13m]: vector=2d, del=0, dm=physical, dest=0 (high, edge)
> > > > > PIN[14m]: vector=2e, del=0, dm=physical, dest=0 (high, edge)
> > > > > PIN[15m]: vector=2f, del=0, dm=physical, dest=0 (high, edge)
> > > > > PIN[16m]: vector=30, del=0, dm=physical, dest=0 (high, edge)
> > > > > PIN[17m]: vector=31, del=0, dm=physical, dest=0 (high, edge)
> > > > > PIN[18m]: vector=32, del=0, dm=physical, dest=0 (high, edge)
> > > > > PIN[19m]: vector=33, del=0, dm=physical, dest=0 (high, edge)
> > > > > PIN[20m]: vector=34, del=0, dm=physical, dest=0 (high, edge)
> > > > > PIN[21m]: vector=35, del=0, dm=physical, dest=0 (high, edge)
> > > > > PIN[22m]: vector=36, del=0, dm=physical, dest=0 (high, edge)
> > > > > PIN[23m]: vector=37, del=0, dm=physical, dest=0 (high, edge)
> > > > > IO-APIC: dual 8259: yes
> > > > > IO-APIC: ovr[ 0] 00 -> 2
> > > > > IO-APIC: ovr[ 1] 05 -> 5
> > > > > IO-APIC: ovr[ 2] 09 -> 9
> > > > > IO-APIC: ovr[ 3] 0a -> a
> > > > > IO-APIC: ovr[ 4] 0b -> b
> > > > > Boot_alloc: size=0x4
> > > > > Boot_alloc: @ 0xfffe5150
> > > > > Boot_alloc: remaining free block @ 0xfffe5158 (size=2a8)
> > > > > Allocate cpu_mem @ 0xfffe5400
> > > > > FPU0: SSE
> > > > > Local APIC[00]: version=11 max_lvt=5
> > > > > APIC ESR value before/after enabling: 00000000/00000000
> > > > > Using the Local APIC timer on vector 90 (Periodic Mode) for
> scheduling
> > > > > SERIAL ESC: allocated IRQ 4 for serial uart
> > > > > Absolute KIP Syscalls using: Sysenter
> > > > > Boot_alloc: size=0x14
> > > > > Boot_alloc: @ 0xfffe5158
> > > > > Boot_alloc: remaining free block @ 0xfffe5170 (size=290)
> > > > > Boot_alloc: size=0x300
> > > > > Boot_alloc: allocated extra memory block @0xfffe5800 (size=400)
> > > > > Boot_alloc: @ 0xfffe5800
> > > > > Boot_alloc: remaining free block @ 0xfffe5b00 (size=100)
> > > > > Enable MSI support: chained IRQ mgr @ 0xfffe5150
> > > > > SERIAL ESC: allocated IRQ 4 for serial uart
> > > > > Not using serial hack in slow timer handler.
> > > > > CPU[0]: GenuineIntel (6:6:3:0)[00000663] Model: QEMU Virtual CPU
> > > version
> > > > > 2.0.0 at 2694MHz
> > > > >
> > > > > 32 KB L1 I Cache (8-way associative, 64 bytes per line)
> > > > > 32 KB L1 D Cache (8-way associative, 64 bytes per line)
> > > > > 2048 KB L2 U Cache (8-way associative, 64 bytes per line)
> > > > >
> > > > > Freeing init code/data: 28672 bytes (7 pages)
> > > > >
> > > > > Calibrating timer loop... done.
> > > > > SIGMA0: Hello!
> > > > > KIP @ 400000
> > > > > Found Fiasco: KIP syscalls: yes
> > > > > allocated 4KB for maintenance structures
> > > > > SIGMA0: Dump of all resource maps
> > > > > RAM:------------------------
> > > > > [0:1000;9efff]
> > > > > [0:10c000;13ffff]
> > > > > [4:140000;18efff]
> > > > > [0:18f000;2dcfff]
> > > > > [4:2dd000;2ddfff]
> > > > > [0:2de000;3fffff]
> > > > > [0:46b000;10fffff]
> > > > > [4:1100000;7a4efff]
> > > > > [0:7a4f000;b77fffff]
> > > > > [0:bb400000;bb7fdfff]
> > > > > IOMEM:----------------------
> > > > > [0:0;fff]
> > > > > [0:9f000;fffff]
> > > > > [0:bb7fe000;febfffff]
> > > > > [0:fec01000;fedfffff]
> > > > > [0:fee01000;ffffffff]
> > > > > IO PORTS--------------------------
> > > > > [0:0;fffffff]
> > > > > MOE: Hello world
> > > > > MOE: found 2901528 KByte free memory
> > > > > MOE: found RAM from 1000 to bb7fe000
> > > > > MOE: allocated 2999 KByte for the page array @0x46b000
> > > > > MOE: virtual user address space [0-bfffffff]
> > > > > MOE: rom name space cap -> [C:501000]
> > > > > BOOTFS: [6bc4000-6cf3a83] [C:503000] l4re
> > > > > BOOTFS: [6cf4000-6f4217c] [C:504000] ned
> > > > > BOOTFS: [6f43000-7a4e390] [C:505000] io
> > > > > BOOTFS: [1100000-12058b9] [C:506000] rtc
> > > > > BOOTFS: [1206000-162cfce] [C:507000] mag
> > > > > BOOTFS: [162d000-17a6ebe] [C:508000] fb-drv
> > > > > BOOTFS: [17a7000-17a783a] [C:509000] lx_ginger.cfg
> > > > > BOOTFS: [17a8000-17a84a4] [C:50a000] x86-legacy.devs
> > > > > BOOTFS: [17a9000-17a986f] [C:50b000] x86_android.vbus
> > > > > BOOTFS: [17aa000-1b58e47] [C:50c000] vmlinuz.android
> > > > > BOOTFS: [1b59000-1c53000] [C:50d000] root-x86-ginger.img
> > > > > BOOTFS: [1c53000-6bc4000] [C:50e000] system-x86-ginger.img
> > > > > MOE: cmdline:
> > > > >
> > >
> /home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/moe
> > > > > rom/lx_ginger.cfg
> > > > > MOE: Starting: rom/ned rom/lx_ginger.cfg
> > > > > MOE: loading 'rom/ned'
> > > > > Ned says: Hi World!
> > > > > Ned: loading file: 'rom/lx_ginger.cfg'
> > > > > io | Dev_factory: register factory for N2Hw6DeviceE
> > > > > io | GTF: register factory for 7Pci_dev
> > > > > io | GTF: register factory for N2Hw12Msi_resourceE
> > > > > io | Dev_factory: register factory for N2Hw11Gpio_deviceE
> > > > > io | Io service
> > > > > io | Find root Pointer
> > > > > io | Find root Pointer: f09e0
> > > > > io | ACPI: RSDP 0xf09e0 00014 (v00 BOCHS )
> > > > > io | ACPI: RSDT 0xbb7ffbc1 00034 (v01 BOCHS BXPCRSDT 00000001
> > > BXPC
> > > > > 00000001)
> > > > > io |
> > > > >
> > >
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbff1c0,
> > > > > 0x80007d08, 0x80007d0c): UNINPLEMENTED
> > > > > io | ACPI: FACP 0xbb7ff1c0 00074 (v01 BOCHS BXPCFACP 00000001
> > > BXPC
> > > > > 00000001)
> > > > > io |
> > > > >
> > >
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbfe040,
> > > > > 0x80007ce8, 0x80007cec): UNINPLEMENTED
> > > > > io | ACPI: DSDT 0xbb7fe040 01180 (v01 BOCHS BXPCDSDT 00000001
> > > BXPC
> > > > > 00000001)
> > > > > io |
> > > > >
> > >
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbfe000,
> > > > > 0x80007ce8, 0x80007cec): UNINPLEMENTED
> > > > > io | ACPI: FACS 0xbb7fe000 00040
> > > > > io |
> > > > >
> > >
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbff234,
> > > > > 0x80007d08, 0x80007d0c): UNINPLEMENTED
> > > > > io | ACPI: SSDT 0xbb7ff234 008DD (v01 BOCHS BXPCSSDT 00000001
> > > BXPC
> > > > > 00000001)
> > > > > io |
> > > > >
> > >
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbffb11,
> > > > > 0x80007d08, 0x80007d0c): UNINPLEMENTED
> > > > > io | ACPI: APIC 0xbb7ffb11 00078 (v01 BOCHS BXPCAPIC 00000001
> > > BXPC
> > > > > 00000001)
> > > > > io |
> > > > >
> > >
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbffb89,
> > > > > 0x80007d08, 0x80007d0c): UNINPLEMENTED
> > > > > io | ACPI: HPET 0xbb7ffb89 00038 (v01 BOCHS BXPCHPET 00000001
> > > BXPC
> > > > > 00000001)
> > > > > io | Parsing all Control Methods:
> > > > > io | Table [DSDT](id 0001) - 144 Objects with 18 Devices 52
> > > Methods 8
> > > > > Regions
> > > > > io | Parsing all Control Methods:
> > > > > io | Table [SSDT](id 0002) - 155 Objects with 32 Devices 42
> > > Methods 1
> > > > > Regions
> > > > > io | tbxfload-0274 [02] TbLoadNamespace : ACPI Tables
> > > > > successfully acquired
> > > > > io | evxfevnt-0175 [02] Enable : Transition to
> ACPI
> > > > > mode successful
> > > > > io | evgpeblk-0523 [04] EvCreateGpeBlock : GPE 00 to 0F
> > > [_GPE] 2
> > > > > regs on int 0x9
> > > > > io |
> > > > >
> > >
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:60:AcpiOsInstallInterruptHandler(9,
> > > > > 0x107d6c0, 0x3aa8): UNINPLEMENTED
> > > > > io | Completing Region/Field/Buffer/Package
> > > > > initialization:.....................................
> > > > > io | Initialized 9/9 Regions 2/2 Fields 21/21 Buffers 5/5
> Packages
> > > > > (308 nodes)
> > > > > io | Initializing Device/Processor/Thermal objects by
> executing
> > > _INI
> > > > > methods:
> > > > > io | Executed 0 _INI methods requiring 1 _STA executions
> > > (examined 53
> > > > > objects)
> > > > > io | ACPICA-Version:20121018, System in ACPI MODE, 32bit timer
> > > > > io | <0xb120>IRQ [00000000000000-00000000000000 1] rising
> edge
> > > > > (32bit) (align=0 flags=44201)
> > > > > io | <0x16b38>IRQ [00000000000000-00000000000000 1] rising
> > > edge
> > > > > (32bit) (align=0 flags=44201)
> > > > > io | Ready. Waiting for request.
> > > > > mag | Hello from MAG
> > > > > fb | Trying execution of ``set VBE mode'' using x86emu
> > > > > fb | Found VESA BIOS version 3.0
> > > > > fb | OEM SeaBIOS VBE(C) 2
> > > > >
> > > > >
> > > > >
> > > > > =
> > > > >
> > > > > Sincerly,
> > > > > Cem
> > > > >
> > > > > Cem Akpolat
> > > > >
> > > > >
> > > > > On Tue, Jul 22, 2014 at 9:54 AM, Matthias Lange <
> > > > > matthias.lange at kernkonzept.com> wrote:
> > > > >
> > > > >> Hi,
> > > > >>
> > > > >> On Mon, Jul 21, 2014 at 09:38:58PM +0200, cem akpolat wrote:
> > > > >> > Hi,
> > > > >> >
> > > > >> > I believe I should see at least an android gingerbread os in the
> > > qemu,
> > > > >> root
> > > > >> > file system console like in l4linux. I cannot the whole
> components
> > > that
> > > > >> I
> > > > >> > included in module.list are being loaded. Here is the module
> list:
> > > > >>
> > > > >> I cannot see any L4Linux log messages (like the ones in your other
> > > email)
> > > > >> in
> > > > >> your pasted log. Can you provide those, so that I can analyze the
> > > problem?
> > > > >>
> > > > >> Matthias.
> > > > >>
> > > > >> > ======
> > > > >> > modaddr 0x01100000
> > > > >> >
> > > > >> > default-kernel fiasco -serial_esc
> > > > >> > default-bootstrap bootstrap
> > > > >> >
> > > > >> > entry l4_gingerbread
> > > > >> > roottask moe rom/lx_ginger.cfg
> > > > >> > kernel fiasco -serial_esc
> > > > >> > module l4re
> > > > >> > module ned
> > > > >> > module io
> > > > >> > module rtc
> > > > >> > module mag
> > > > >> > module fb-drv
> > > > >> > module lx_ginger.cfg
> > > > >> > module x86-legacy.devs
> > > > >> > module x86_android.vbus
> > > > >> > module vmlinuz.android
> > > > >> > module root-x86-ginger.img
> > > > >> > module system-x86-ginger.img
> > > > >> > ======
> > > > >> > Normally, root-x86-ginger and system-x86 should be loaded, but I
> > > cannot
> > > > >> see
> > > > >> > them. And the lua configuration file is below, this is the same
> > > > >> > configuration file which is used in lx_ginger.iso (from
> > > l4android.org).
> > > > >> > ======
> > > > >> > require("L4");
> > > > >> >
> > > > >> > local lxname = "vmlinuz.android";
> > > > >> > local l = L4.default_loader;
> > > > >> >
> > > > >> > local io_caps = {
> > > > >> > sigma0 = L4.cast(L4.Proto.Factory,
> > > > >> L4.Env.sigma0):create(L4.Proto.Sigma0);
> > > > >> > rtc = l:new_channel():svr();
> > > > >> > con_bus = L4.default_loader:new_channel():svr();
> > > > >> > ginger_bus = L4.default_loader:new_channel():svr();
> > > > >> > fb = L4.default_loader:new_channel():svr();
> > > > >> > rom = L4.Env.rom;
> > > > >> > icu = L4.Env.icu;
> > > > >> > };
> > > > >> >
> > > > >> > local rtc_caps = {
> > > > >> > vbus = io_caps.rtc;
> > > > >> > rtc = l:new_channel():svr();
> > > > >> > rom = L4.Env.rom;
> > > > >> > sigma0 = L4.Env.sigma0;
> > > > >> > };
> > > > >> >
> > > > >> > local fb_caps = {
> > > > >> > vbus = io_caps.fb;
> > > > >> > rom = L4.Env.rom;
> > > > >> > fb = L4.default_loader:new_channel():svr();
> > > > >> > };
> > > > >> >
> > > > >> > local con_caps = {
> > > > >> > fb = fb_caps.fb;
> > > > >> > -- fb = L4.Env.vesa;
> > > > >> > vbus = io_caps.con_bus;
> > > > >> > con = L4.default_loader:new_channel():svr();
> > > > >> > rom = L4.Env.rom;
> > > > >> > };
> > > > >> >
> > > > >> > L4.default_loader:startv(
> > > > >> > {
> > > > >> > caps = io_caps,
> > > > >> > log = { "io", "red" },
> > > > >> > },
> > > > >> > "rom/io", "rom/x86-legacy.devs", "rom/x86_android.vbus");
> > > > >> >
> > > > >> > L4.default_loader:startv(
> > > > >> > {
> > > > >> > caps = rtc_caps,
> > > > >> > log = { "rtc", "blue" },
> > > > >> > },
> > > > >> > "rom/rtc");
> > > > >> >
> > > > >> > L4.default_loader:startv(
> > > > >> > {
> > > > >> > caps = fb_caps,
> > > > >> > log = { "fb", "cyan" },
> > > > >> > },
> > > > >> > "rom/fb-drv", "-m 0x117");
> > > > >> >
> > > > >> > local mag_caps = {
> > > > >> > mag = l:new_channel(),
> > > > >> > svc = l:new_channel(),
> > > > >> > };
> > > > >> >
> > > > >> > l:start({
> > > > >> > caps = {
> > > > >> > vbus = io_caps.con_bus,
> > > > >> > fb = fb_caps.fb,
> > > > >> > -- fb = L4.Env.vesa,
> > > > >> > mag = mag_caps.mag:svr(),
> > > > >> > svc = mag_caps.svc:svr(),
> > > > >> > },
> > > > >> > log = { "mag", "g" },
> > > > >> > l4re_dbg = L4.Dbg.Warn,
> > > > >> > },
> > > > >> > "rom/mag");
> > > > >> >
> > > > >> > local android_caps = {
> > > > >> > log = L4.Env.log:m("rws");
> > > > >> > vbus = io_caps.ginger_bus;
> > > > >> > rtc = rtc_caps.rtc;
> > > > >> > rom = L4.Env.rom;
> > > > >> > -- fb = con_caps.con:create(L4.Proto.Goos);
> > > > >> > fb = mag_caps.svc:create(L4.Proto.Goos, "g=640x480,10,10");
> > > > >> > };
> > > > >> >
> > > > >> > L4.default_loader:start(
> > > > >> > {
> > > > >> > caps = android_caps,
> > > > >> > l4re_dbg = L4.Dbg.Warn,
> > > > >> > log = { "android", "yellow" },
> > > > >> > },
> > > > >> > "rom/" .. lxname .. " console=ttyLv0 mem=256M
> > > > >> > l4bdds.add=rom/system-x86-ginger.img,rw l4fb.touchscreen=1
> > > > >> > androidboot.console=ttyLv0 boot=local ip=dhcp
> > > > >> > l4x_rd=rom/root-x86-ginger.img rw root=1:0 ramdisk_size=1500
> > > init=/init
> > > > >> > --debug");
> > > > >> >
> > > > >> > ======
> > > > >> >
> > > > >> > Why aren't the other components being loaded?
> > > > >> >
> > > > >> > Br,
> > > > >> > Cem
> > > > >> >
> > > > >> > Cem Akpolat
> > > > >> >
> > > > >> >
> > > > >> > On Mon, Jul 21, 2014 at 8:38 PM, Matthias Lange <
> > > > >> > matthias.lange at kernkonzept.com> wrote:
> > > > >> >
> > > > >> > > Hi,
> > > > >> > >
> > > > >> > > what is the actual problem you encounter? I cannot spot any
> > > problem
> > > > >> from
> > > > >> > > the (incomplete?) log.
> > > > >> > >
> > > > >> > > Matthias.
> > > > >> > >
> > > > >> > > On 21.07.2014, at 17:11, cem akpolat <akpolatcem at gmail.com>
> > > wrote:
> > > > >> > >
> > > > >> > > Dear all,
> > > > >> > >
> > > > >> > >
> > > > >> > > I compiled l4android in the light of the explanation under
> > > > >> l4android.org,
> > > > >> > > however, I encountered the failure or another state that I
> don't
> > > know
> > > > >> what
> > > > >> > > it exactly means. It doesn't seem as an error, however, it
> stays
> > > > >> here. By
> > > > >> > > the way, the build.pl file provided in l4android.org doesn't
> > > work,
> > > > >> > > therefore I have compiled everything manually.
> > > > >> > >
> > > > >> > > n/x86_586/l4f/system-x86-ginger.img " -serial stdio -m 3000
> > > > >> > >
> > > > >> > > L4 Bootstrapper
> > > > >> > > Build: #1 Mo 21. Jul 16:33:27 CEST 2014, x86-32, 4.8.2
> > > > >> > > RAM: 0000000000000000 - 000000000009fbff: 639kB
> > > > >> > > RAM: 0000000000100000 - 00000000bb7fdfff: 3070968kB
> > > > >> > > Total RAM: 2999MB
> > > > >> > > Moving up to 15 modules behind 1100000
> > > > >> > > moving module 00 { 2e5000-350c3f } -> { 845a000-84c5c3f }
> > > [441408]
> > > > >> > > moving module 01 { 351000-3a4c48 } -> { 84c6000-8519c48 }
> > > [343113]
> > > > >> > > moving module 02 { 3a5000-5e6a68 } -> { 851a000-875ba68 }
> > > [2366057]
> > > > >> > > moving module 03 { 5e7000-716a82 } -> { 763f000-776ea82 }
> > > [1243779]
> > > > >> > > moving module 04 { 717000-96517b } -> { 776f000-79bd17b }
> > > [2417020]
> > > > >> > > moving module 05 { 966000-147138f } -> { 875c000-926738f }
> > > > >> [11580304]
> > > > >> > > moving module 06 { 1472000-15778b8 } -> { 1100000-12058b8 }
> > > > >> [1071289]
> > > > >> > > moving module 07 { 1578000-199efcd } -> { 1206000-162cfcd }
> > > > >> [4353998]
> > > > >> > > moving module 08 { 199f000-1b18ebd } -> { 162d000-17a6ebd }
> > > > >> [1547966]
> > > > >> > > moving module 09 { 1b19000-1b19839 } -> { 17a7000-17a7839 }
> > > [2106]
> > > > >> > > moving module 10 { 1b1a000-1b1a36b } -> { 17a8000-17a836b }
> > > [876]
> > > > >> > > moving module 11 { 1b1b000-1b1b86e } -> { 17a9000-17a986e }
> > > [2159]
> > > > >> > > moving module 12 { 1b1c000-1ecae4e } -> { 17aa000-1b58e4e }
> > > > >> [3862095]
> > > > >> > > moving module 13 { 1ecb000-1fcafff } -> { 1b59000-1c58fff }
> > > > >> [1048576]
> > > > >> > > moving module 14 { 1fcb000-763efff } -> { 1c59000-72ccfff }
> > > > >> [90652672]
> > > > >> > > moving module 03 { 763f000-776ea82 } -> { 72cd000-73fca82 }
> > > > >> [1243779]
> > > > >> > > moving module 04 { 776f000-79bd17b } -> { 73fd000-764b17b }
> > > > >> [2417020]
> > > > >> > > moving module 05 { 875c000-926738f } -> { 764c000-815738f }
> > > > >> [11580304]
> > > > >> > > Scanning
> > > > >> > >
> > > > >>
> > >
> /home/akpolat/mysvn/l4android/l4android/src/src/kernel/fiasco/build//fiasco
> > > > >> > > -serial_esc
> > > > >> > > Scanning
> > > > >> > >
> > > > >>
> > >
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/build/bin/x86_586/l4f/sigma0
> > > > >> > > Scanning
> > > > >> > >
> > > > >>
> > >
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/build/bin/x86_586/l4f/moe
> > > > >> > > rom/lx_ginger.cfg
> > > > >> > > Bootloader MMAP:
> > > > >> > > [ 0, 9fc00) RAM (1)
> > > > >> > > [ 9fc00, a0000) reserved (2)
> > > > >> > > [ f0000, 100000) reserved (2)
> > > > >> > > [ 100000, bb7fe000) RAM (1)
> > > > >> > > [ bb7fe000, bb800000) reserved (2)
> > > > >> > > [ fffc0000, 100000000) reserved (2)
> > > > >> > > Relocated mbi to [0x2dd000-0x2dd606]
> > > > >> > > Loading
> /l4android/l4android/src/src/kernel/fiasco/build//fiasco
> > > > >> > > Loading
> ndroid/l4android/src/src/l4/build/bin/x86_586/l4f/sigma0
> > > > >> > > Loading
> l4android/l4android/src/src/l4/build/bin/x86_586/l4f/moe
> > > > >> > > find kernel info page...
> > > > >> > > found kernel info page at 0x400000
> > > > >> > > Regions of list 'regions'
> > > > >> > > [ 0, fff] { 1000} Arch BIOS
> > > > >> > > [ 9fc00, 9ffff] { 400} Arch BIOS
> > > > >> > > [ f0000, fffff] { 10000} Arch BIOS
> > > > >> > > [ 100000, 10b197] { b198} Sigma0
> > > > >> > > ndroid/l4android/src/src/l4/build/bin/x86_586/l4f/sigma0
> > > > >> > > [ 140000, 18e21f] { 4e220} Root
> > > > >> > > l4android/l4android/src/src/l4/build/bin/x86_586/l4f/moe
> > > > >> > > [ 2d0000, 2e34a7] { 134a8} Boot bootstrap
> > > > >> > > [ 2dd000, 2dd703] { 704} Root Multiboot info
> > > > >> > > [ 300000, 38ffff] { 90000} Kern
> > > > >> > > /l4android/l4android/src/src/kernel/fiasco/build//fiasco
> > > > >> > > [ 400000, 471fff] { 72000} Kern
> > > > >> > > /l4android/l4android/src/src/kernel/fiasco/build//fiasco
> > > > >> > > [ 1100000, 815738f] { 7057390} Root Module
> > > > >> > > [ bb7fe000, bb7fffff] { 2000} Arch BIOS
> > > > >> > > [ fffc0000, ffffffff] { 40000} Arch BIOS
> > > > >> > > API Version: (87) experimental
> > > > >> > > Sigma0 config ip:00100218 sp:002e1040
> > > > >> > > Roottask config ip:001401f6 sp:00000000
> > > > >> > > Starting kernel
> > > > >> /l4android/l4android/src/src/kernel/fiasco/build//fiasco
> > > > >> > > at 003007b0
> > > > >> > >
> > > > >> > > Welcome to Fiasco.OC (ia32)!
> > > > >> > > L4/Fiasco.OC ia32 microkernel (C) 1998-2012 TU Dresden
> > > > >> > > Rev: UNKNOWN compiled with gcc 4.8.2 for Intel Pentium []
> > > > >> > > Build: #1 Mo 21. Jul 16:36:47 CEST 2014
> > > > >> > >
> > > > >> > > Performance-critical config option(s) detected:
> > > > >> > > CONFIG_NDEBUG is off
> > > > >> > > CONFIG_NO_FRAME_PTR is off
> > > > >> > >
> > > > >> > > Superpages: yes
> > > > >> > > Kmem:: cpu page at bb3e2000 (4096Bytes)
> > > > >> > > ACPI-Init
> > > > >> > > ACPI: RSDP[0xf09e0] r00 OEM:BOCHS.
> > > > >> > > Boot_alloc: size=0x10
> > > > >> > > Boot_alloc: allocated extra memory block @0xfffe5000
> (size=400)
> > > > >> > > Boot_alloc: @ 0xfffe5000
> > > > >> > > Boot_alloc: remaining free block @ 0xfffe5010 (size=3f0)
> > > > >> > > ACPI: RSDT[0x203ffbc1] r01 OEM:BOCHS. OEMTID:BXPCRSDT
> > > > >> > > ACPI: FACP[0x203ff1c0] r01 OEM:BOCHS. OEMTID:BXPCFACP
> > > > >> > > ACPI: SSDT[0x203ff234] r01 OEM:BOCHS. OEMTID:BXPCSSDT
> > > > >> > > ACPI: APIC[0x203ffb11] r01 OEM:BOCHS. OEMTID:BXPCAPIC
> > > > >> > > ACPI: HPET[0x203ffb89] r01 OEM:BOCHS. OEMTID:BXPCHPET
> > > > >> > > IO-APIC: MADT = 0x203ffb11
> > > > >> > > IO-APIC[ 0]: struct: 0x203ffb45 adr=fec00000
> > > > >> > > Boot_alloc: size=0x1c
> > > > >> > > Boot_alloc: @ 0xfffe5010
> > > > >> > > Boot_alloc: remaining free block @ 0xfffe5030 (size=3d0)
> > > > >> > > Boot_alloc: size=0x120
> > > > >> > > Boot_alloc: @ 0xfffe5030
> > > > >> > > Boot_alloc: remaining free block @ 0xfffe5150 (size=2b0)
> > > > >> > > IO-APIC[ 0]: pins 24
> > > > >> > > PIN[ 0m]: vector=20, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > PIN[ 1m]: vector=21, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > PIN[ 2m]: vector=22, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > PIN[ 3m]: vector=23, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > PIN[ 4m]: vector=24, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > PIN[ 5m]: vector=25, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > PIN[ 6m]: vector=26, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > PIN[ 7m]: vector=27, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > PIN[ 8m]: vector=28, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > PIN[ 9m]: vector=29, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > PIN[10m]: vector=2a, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > PIN[11m]: vector=2b, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > PIN[12m]: vector=2c, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > PIN[13m]: vector=2d, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > PIN[14m]: vector=2e, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > PIN[15m]: vector=2f, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > PIN[16m]: vector=30, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > PIN[17m]: vector=31, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > PIN[18m]: vector=32, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > PIN[19m]: vector=33, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > PIN[20m]: vector=34, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > PIN[21m]: vector=35, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > PIN[22m]: vector=36, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > PIN[23m]: vector=37, del=0, dm=physical, dest=0 (high, edge)
> > > > >> > > IO-APIC: dual 8259: yes
> > > > >> > > IO-APIC: ovr[ 0] 00 -> 2
> > > > >> > > IO-APIC: ovr[ 1] 05 -> 5
> > > > >> > > IO-APIC: ovr[ 2] 09 -> 9
> > > > >> > > IO-APIC: ovr[ 3] 0a -> a
> > > > >> > > IO-APIC: ovr[ 4] 0b -> b
> > > > >> > > Boot_alloc: size=0x4
> > > > >> > > Boot_alloc: @ 0xfffe5150
> > > > >> > > Boot_alloc: remaining free block @ 0xfffe5158 (size=2a8)
> > > > >> > > Allocate cpu_mem @ 0xfffe5400
> > > > >> > > FPU0: SSE
> > > > >> > > Local APIC[00]: version=11 max_lvt=5
> > > > >> > > APIC ESR value before/after enabling: 00000000/00000000
> > > > >> > > Using the Local APIC timer on vector 90 (Periodic Mode) for
> > > scheduling
> > > > >> > > SERIAL ESC: allocated IRQ 4 for serial uart
> > > > >> > > Absolute KIP Syscalls using: Sysenter
> > > > >> > > Boot_alloc: size=0x14
> > > > >> > > Boot_alloc: @ 0xfffe5158
> > > > >> > > Boot_alloc: remaining free block @ 0xfffe5170 (size=290)
> > > > >> > > Boot_alloc: size=0x300
> > > > >> > > Boot_alloc: allocated extra memory block @0xfffe5800
> (size=400)
> > > > >> > > Boot_alloc: @ 0xfffe5800
> > > > >> > > Boot_alloc: remaining free block @ 0xfffe5b00 (size=100)
> > > > >> > > Enable MSI support: chained IRQ mgr @ 0xfffe5150
> > > > >> > > SERIAL ESC: allocated IRQ 4 for serial uart
> > > > >> > > Not using serial hack in slow timer handler.
> > > > >> > > CPU[0]: GenuineIntel (6:6:3:0)[00000663] Model: QEMU Virtual
> CPU
> > > > >> version
> > > > >> > > 2.0.0 at 2694MHz
> > > > >> > >
> > > > >> > > 32 KB L1 I Cache (8-way associative, 64 bytes per line)
> > > > >> > > 32 KB L1 D Cache (8-way associative, 64 bytes per line)
> > > > >> > > 2048 KB L2 U Cache (8-way associative, 64 bytes per line)
> > > > >> > >
> > > > >> > > Freeing init code/data: 28672 bytes (7 pages)
> > > > >> > >
> > > > >> > > Calibrating timer loop... done.
> > > > >> > > SIGMA0: Hello!
> > > > >> > > KIP @ 400000
> > > > >> > > Found Fiasco: KIP syscalls: yes
> > > > >> > > allocated 4KB for maintenance structures
> > > > >> > > SIGMA0: Dump of all resource maps
> > > > >> > > RAM:------------------------
> > > > >> > > [0:1000;9efff]
> > > > >> > > [0:10c000;13ffff]
> > > > >> > > [4:140000;18efff]
> > > > >> > > [0:18f000;2dcfff]
> > > > >> > > [4:2dd000;2ddfff]
> > > > >> > > [0:2de000;3fffff]
> > > > >> > > [0:46b000;10fffff]
> > > > >> > > [4:1100000;8157fff]
> > > > >> > > [0:8158000;b77fffff]
> > > > >> > > [0:bb400000;bb7fdfff]
> > > > >> > > IOMEM:----------------------
> > > > >> > > [0:0;fff]
> > > > >> > > [0:9f000;fffff]
> > > > >> > > [0:bb7fe000;febfffff]
> > > > >> > > [0:fec01000;fedfffff]
> > > > >> > > [0:fee01000;ffffffff]
> > > > >> > > IO PORTS--------------------------
> > > > >> > > [0:0;fffffff]
> > > > >> > > MOE: Hello world
> > > > >> > > MOE: found 2894324 KByte free memory
> > > > >> > > MOE: found RAM from 1000 to bb7fe000
> > > > >> > > MOE: allocated 2999 KByte for the page array @0x46b000
> > > > >> > > MOE: virtual user address space [0-bfffffff]
> > > > >> > > MOE: rom name space cap -> [C:501000]
> > > > >> > > BOOTFS: [72cd000-73fca83] [C:503000] l4re
> > > > >> > > BOOTFS: [73fd000-764b17c] [C:504000] ned
> > > > >> > > BOOTFS: [764c000-8157390] [C:505000] io
> > > > >> > > BOOTFS: [1100000-12058b9] [C:506000] rtc
> > > > >> > > BOOTFS: [1206000-162cfce] [C:507000] mag
> > > > >> > > BOOTFS: [162d000-17a6ebe] [C:508000] fb-drv
> > > > >> > > BOOTFS: [17a7000-17a783a] [C:509000] lx_ginger.cfg
> > > > >> > > BOOTFS: [17a8000-17a836c] [C:50a000] x86-legacy.devs
> > > > >> > > BOOTFS: [17a9000-17a986f] [C:50b000] x86_android.vbus
> > > > >> > > BOOTFS: [17aa000-1b58e4f] [C:50c000] vmlinuz.android
> > > > >> > > BOOTFS: [1b59000-1c59000] [C:50d000] root-x86-ginger.img
> > > > >> > > BOOTFS: [1c59000-72cd000] [C:50e000] system-x86-ginger.img
> > > > >> > > MOE: cmdline:
> > > > >> > >
> > > > >>
> > >
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/build/bin/x86_586/l4f/moe
> > > > >> > > rom/lx_ginger.cfg
> > > > >> > > MOE: Starting: rom/ned rom/lx_ginger.cfg
> > > > >> > > MOE: loading 'rom/ned'
> > > > >> > > Ned says: Hi World!
> > > > >> > > Ned: loading file: 'rom/lx_ginger.cfg'
> > > > >> > > io | Dev_factory: register factory for N2Hw6DeviceE
> > > > >> > > io | GTF: register factory for 7Pci_dev
> > > > >> > > io | GTF: register factory for N2Hw12Msi_resourceE
> > > > >> > > io | Dev_factory: register factory for N2Hw11Gpio_deviceE
> > > > >> > > io | Io service
> > > > >> > > io | Find root Pointer
> > > > >> > > io | Find root Pointer: f09e0
> > > > >> > > io | ACPI: RSDP 0xf09e0 00014 (v00 BOCHS )
> > > > >> > > io | ACPI: RSDT 0xbb7ffbc1 00034 (v01 BOCHS BXPCRSDT
> > > 00000001
> > > > >> BXPC
> > > > >> > > 00000001)
> > > > >> > > io |
> > > > >> > >
> > > > >>
> > >
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/
> > > > >> > > osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbff1c0,
> 0x80007d08,
> > > > >> > > 0x80007d0c): UNINPLEMENTED
> > > > >> > > io | ACPI: FACP 0xbb7ff1c0 00074 (v01 BOCHS BXPCFACP
> > > 00000001
> > > > >> BXPC
> > > > >> > > 00000001)
> > > > >> > > io |
> > > > >> > >
> > > > >>
> > >
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/
> > > > >> > > osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbfe040,
> 0x80007ce8,
> > > > >> > > 0x80007cec): UNINPLEMENTED
> > > > >> > > io | ACPI: DSDT 0xbb7fe040 01180 (v01 BOCHS BXPCDSDT
> > > 00000001
> > > > >> BXPC
> > > > >> > > 00000001)
> > > > >> > > io |
> > > > >> > >
> > > > >>
> > >
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/
> > > > >> > > osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbfe000,
> 0x80007ce8,
> > > > >> > > 0x80007cec): UNINPLEMENTED
> > > > >> > > io | ACPI: FACS 0xbb7fe000 00040
> > > > >> > > io |
> > > > >> > >
> > > > >>
> > >
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/
> > > > >> > > osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbff234,
> 0x80007d08,
> > > > >> > > 0x80007d0c): UNINPLEMENTED
> > > > >> > > io | ACPI: SSDT 0xbb7ff234 008DD (v01 BOCHS BXPCSSDT
> > > 00000001
> > > > >> BXPC
> > > > >> > > 00000001)
> > > > >> > > io |
> > > > >> > >
> > > > >>
> > >
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/
> > > > >> > > osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbffb11,
> 0x80007d08,
> > > > >> > > 0x80007d0c): UNINPLEMENTED
> > > > >> > > io | ACPI: APIC 0xbb7ffb11 00078 (v01 BOCHS BXPCAPIC
> > > 00000001
> > > > >> BXPC
> > > > >> > > 00000001)
> > > > >> > > io |
> > > > >> > >
> > > > >>
> > >
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/
> > > > >> > > osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbffb89,
> 0x80007d08,
> > > > >> > > 0x80007d0c): UNINPLEMENTED
> > > > >> > > io | ACPI: HPET 0xbb7ffb89 00038 (v01 BOCHS BXPCHPET
> > > 00000001
> > > > >> BXPC
> > > > >> > > 00000001)
> > > > >> > > io | Parsing all Control Methods:
> > > > >> > > io | Table [DSDT](id 0001) - 144 Objects with 18 Devices
> 52
> > > > >> Methods 8
> > > > >> > > Regions
> > > > >> > > io | Parsing all Control Methods:
> > > > >> > > io | Table [SSDT](id 0002) - 155 Objects with 32 Devices
> 42
> > > > >> Methods 1
> > > > >> > > Regions
> > > > >> > > io | tbxfload-0274 [02] TbLoadNamespace : ACPI
> Tables
> > > > >> > > successfully acquired
> > > > >> > > io | evxfevnt-0175 [02] Enable :
> Transition to
> > > > >> ACPI
> > > > >> > > mode successful
> > > > >> > > io | evgpeblk-0523 [04] EvCreateGpeBlock : GPE 00
> to 0F
> > > > >> [_GPE] 2
> > > > >> > > regs on int 0x9
> > > > >> > > io |
> > > > >> > >
> > > > >>
> > >
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/
> > > > >> > > osl-basic.cc:60:AcpiOsInstallInterruptHandler(9, 0x107d6c0,
> > > 0x3aa8):
> > > > >> > > UNINPLEMENTED
> > > > >> > > io | Completing Region/Field/Buffer/Package
> > > > >> > > initialization:.....................................
> > > > >> > > io | Initialized 9/9 Regions 2/2 Fields 21/21 Buffers 5/5
> > > > >> Packages
> > > > >> > > (308 nodes)
> > > > >> > > io | Initializing Device/Processor/Thermal objects by
> > > executing
> > > > >> _INI
> > > > >> > > methods:
> > > > >> > > io | Executed 0 _INI methods requiring 1 _STA executions
> > > > >> (examined 53
> > > > >> > > objects)
> > > > >> > > io | ACPICA-Version:20121018, System in ACPI MODE, 32bit
> > > timer
> > > > >> > > io | <0xb120>IRQ [00000000000000-00000000000000 1]
> rising
> > > > >> edge
> > > > >> > > (32bit) (align=0 flags=44201)
> > > > >> > > io | <0x16b38>IRQ [00000000000000-00000000000000 1]
> > > rising
> > > > >> edge
> > > > >> > > (32bit) (align=0 flags=44201)
> > > > >> > > io | Ready. Waiting for request.
> > > > >> > > mag | Hello from MAG
> > > > >> > > fb | Trying execution of ``set VBE mode'' using x86emu
> > > > >> > > fb | Found VESA BIOS version 3.0
> > > > >> > > fb | OEM SeaBIOS VBE(C) 2011
> > > > >> > > rtc | Date:21.07.2014 Time:15:05:38
> > > > >> > >
> > > > >> > > Best Regards,
> > > > >> > > Cem Akpolat
> > > > >> > > _______________________________________________
> > > > >> > > l4-hackers mailing list
> > > > >> > > l4-hackers at os.inf.tu-dresden.de
> > > > >> > > http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers
> > > > >> > >
> > > > >> > >
> > > > >> > > matthias.lange at kernkonzept.com <
> michael.hohmuth at kernkonzept.com>
> > > -
> > > > >> Tel.
> > > > >> > > 0351-41 888 614
> > > > >> > >
> > > > >> > > Kernkonzept GmbH. Sitz: Dresden. Amtsgericht Dresden, HRB
> 31129.
> > > > >> > > Geschäftsführer: Dr.-Ing. Michael Hohmuth
> > > > >> > >
> > > > >> > >
> > > > >>
> > > > >> --
> > > > >> Matthias Lange, matthias.lange at kernkonzept.com, +49 - 351 - 41
> 88 86
> > > 14
> > > > >>
> > > > >> Kernkonzept GmbH. Sitz: Dresden. Amtsgericht Dresden, HRB 31129.
> > > > >> Geschäftsführer: Dr.-Ing. Michael Hohmuth
> > > > >>
> > > > >>
> > > > >
> > >
> > > --
> > > Matthias Lange, matthias.lange at kernkonzept.com, +49 - 351 - 41 88 86
> 14
> > >
> > > Kernkonzept GmbH. Sitz: Dresden. Amtsgericht Dresden, HRB 31129.
> > > Geschäftsführer: Dr.-Ing. Michael Hohmuth
> > >
> > >
>
> --
> Matthias Lange, matthias.lange at kernkonzept.com, +49 - 351 - 41 88 86 14
>
> Kernkonzept GmbH. Sitz: Dresden. Amtsgericht Dresden, HRB 31129.
> Geschäftsführer: Dr.-Ing. Michael Hohmuth
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://os.inf.tu-dresden.de/pipermail/l4-hackers/attachments/20140724/1599e299/attachment.html>
More information about the l4-hackers
mailing list