Is wrong my kernel command line, on this situation ? (Booting L4 linux)

[Tim Komarov]

Hello!

Try to build L4Linux like that (arm_defconfig, not your manual configuration):

$mkdir builddir

$ make O=pathtobuilddir L4ARCH=arm CROSS_COMPILER=arm-linux- arm_defconfig

Change path to l4re-tree:
$ make O=pathtobuilddir L4ARCH=arm CROSS_COMPILER=arm-linux- menuconfig

Build:
$ make O=pathtobuilddir L4ARCH=arm CROSS_COMPILER=arm-linux- -j5


24.03.2014, 12:56, "Taeung" <treeze.taeung at gmail.com>:
> Hello, every l4-hacker.
>
> I've succeeded booting "Hello world + L4/Fiasco" on Freescale i.MX6q_sabre_sd because big help of Admed, Tim, Matthias.
>
> And then, I'm trying to boot "L4 Linux + L4/Fiasco" on my board.
>
> I've  configured for L4 linux build.
> Such as..
>
> System type -> ARM system type (L4 Linux) Build type (Use ARMv7)
> And then, I've successfully build it.
>
> I've did "make uimage E='L4Linux ARM' ..." ,so I've got uimage.
> And I try to boot it ,using 'uImage' and 'u-boot.bin'.
>
> But I did not boot it on my board.
> It was stoped at "l4linux | panic: going to sleep forever, bye"
>
> ====================
> ... (eclipsis)
> Trying to unpack rootfs image as initramfs...
> rootfs image is not initramfs (junk in compressed archive); looks like an initrd
> INITRD: Freeing memory.
> l4x: Checks passed.
> NetWinder Floating Point Emulator V0.97 (double precision)
> msgmni has been set to 126
> io scheduler noop registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> L4 serial driver
> ttyLv0 at MMIO 0x1 (irq = 211, base_baud = 230400) is a L4
> l4ser_shm: L4 shared mem serial driver
> l4cdds: No name given, not starting.
> brd: module loaded
> l4bdds: No name given, not starting.
> mousedev: PS/2 mouse device common for all mice
> TCP: cubic registered
> NET: Registered protocol family 17
> Minicom2.6.2RAMDISK: ext2 filesystem found at block 0
> RAMDISK: Loading 3072KiB [1 disk] into ram disk... done.
> EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
> EXT4-fs (ram0): mounting ext2 file system using the ext4 subsystem
> EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
> VFS: Mounted root (ext2 filesystem) readonly on device 1:0.
> Freeing unused kernel memory: 112K (022ea000 - 02306000)
> Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
>
> CPU: 0 PID: 1 Comm: sh Not tainted 3.13.0-l4-svn46 #1
> [<0200b6ec>] (unwind_backtrace+0x0/0xf8) from [<02005308>] (show_stack+0x10/0x14)
> [<02005308>] (show_stack+0x10/0x14) from [<0222a17c>] (panic+0x78/0x1c0)
> [<0222a17c>] (panic+0x78/0x1c0) from [<02017d28>] (do_exit+0x724/0x7cc)
> [<02017d28>] (do_exit+0x724/0x7cc) from [<02017ea0>] (do_group_exit+0x40/0xa0)
> [<02017ea0>] (do_group_exit+0x40/0xa0) from [<02021754>] (get_signal_to_deliver+0x1a4/0x474)
> [<02021754>] (get_signal_to_deliver+0x1a4/0x474) from [<02006738>] (do_signal+0x78/0x3d4)
> [<02006738>] (do_signal+0x78/0x3d4) from [<02006b08>] (do_work_pending+0x74/0xcc)
> [<02006b08>] (do_work_pending+0x74/0xcc) from [<02009cf4>] (l4x_vcpu_entry_c+0x18ec/0x1e3c)
> [<02009cf4>] (l4x_vcpu_entry_c+0x18ec/0x1e3c) from [<00094e9c>] (0x94e9c)
> panic: going to sleep forever, bye
> l4linux | panic: going to sleep forever, bye
>
> ====================
>
> I guess that the problem is somthing about ramdisk(root file system) and kernel command line might be wrong.
>
> Referentially I've used ramdisk file(ramdisk-arm.rd) and my kernel command line
> "setenv bootargs_mmc 'setenv bootargs ${bootargs} root=/dev/mmcblk1p1 rootwait rw video=mxcfb1:dev=ldb,LDB-XGA,if=RGB666 video=mxcfb0:dev=hdmi,1920x1080M at 60,if=RGB24'".
>
> How do you think about that?
>
> Is wrong my kernel command line,on this situation ?
>
> - Taeung -
> ,
> _______________________________________________
> l4-hackers mailing list
> l4-hackers at os.inf.tu-dresden.de
> http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers