l4android compilation issue
cem akpolat
akpolatcem at gmail.com
Tue Jul 22 10:16:19 CEST 2014
Hi,
I tested the image on another laptop older than mine, the only thing that I
have seen is "hacked by SECT". The whole problem can rely on my laptop. I
have to figure out it. But should I see also android gingerbread interface
right after this hacked by SECT.
Cheers,
Cem
Cem Akpolat
On Tue, Jul 22, 2014 at 10:07 AM, cem akpolat <akpolatcem at gmail.com> wrote:
> Hi,
>
> That was just an example for l4linux. I meant when I use l4linux instead
> of l4android, I can see root file system, because it is added in the module
> list. But here I reach up to this level, I can't even see the log of
> l4android or root file system, it does nothing after arriving to that
> point. You can also again see the log output below. By the way, Qemu
> version is 2.0.0. Lua congfig file and module list are written in the
> previous mail.
>
> kpolat at akpolatX240:~/mysvn/l4android/l4android_x86/src/src/l4$ make qemu
> E=l4_gingerbread O=build
> '/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/vmlinuz.android'
> is a zipped file, uncompressing to '/tmp/Ybip9Ajla7/vmlinuz.android'
> Note: At least QEmu 0.13 is required for the loading to work.
> qemu-system-i386 -kernel
> /home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/bootstrap
> -append "bootstrap -modaddr 0x01100000" -initrd
> "/home/akpolat/mysvn/l4android/l4android_x86/src/src/kernel/fiasco/build//fiasco
> -serial_esc,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/sigma0
> ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/moe
> rom/lx_ginger.cfg,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/l4re
> ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/ned
> ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/io
> ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/rtc
> ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/mag
> ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/fb-drv
> ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/conf/android_conf/lx_ginger.cfg
> ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/conf/android_conf/x86-legacy.devs
> ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/conf/android_conf/x86_android.vbus
> ,/tmp/Ybip9Ajla7/vmlinuz.android
> ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/root-x86-ginger.img
> ,/home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/system-x86-ginger.img
> " -serial stdio -m 3000
>
> L4 Bootstrapper
> Build: #1 Mo 21. Jul 18:54:56 CEST 2014, x86-32, 4.8.2
> RAM: 0000000000000000 - 000000000009fbff: 639kB
> RAM: 0000000000100000 - 00000000bb7fdfff: 3070968kB
> Total RAM: 2999MB
> Moving up to 15 modules behind 1100000
> moving module 00 { 2e5000-350c3f } -> { 7d51000-7dbcc3f } [441408]
> moving module 01 { 351000-3a4c48 } -> { 7dbd000-7e10c48 } [343113]
> moving module 02 { 3a5000-5e6a68 } -> { 7e11000-8052a68 } [2366057]
> moving module 03 { 5e7000-716a82 } -> { 6f36000-7065a82 } [1243779]
> moving module 04 { 717000-96517b } -> { 7066000-72b417b } [2417020]
> moving module 05 { 966000-147138f } -> { 8053000-8b5e38f } [11580304]
> moving module 06 { 1472000-15778b8 } -> { 1100000-12058b8 } [1071289]
> moving module 07 { 1578000-199efcd } -> { 1206000-162cfcd } [4353998]
> moving module 08 { 199f000-1b18ebd } -> { 162d000-17a6ebd } [1547966]
> moving module 09 { 1b19000-1b19839 } -> { 17a7000-17a7839 } [2106]
> moving module 10 { 1b1a000-1b1a4a3 } -> { 17a8000-17a84a3 } [1188]
> moving module 11 { 1b1b000-1b1b86e } -> { 17a9000-17a986e } [2159]
> moving module 12 { 1b1c000-1ecae46 } -> { 17aa000-1b58e46 } [3862087]
> moving module 13 { 1ecb000-1fc4fff } -> { 1b59000-1c52fff } [1024000]
> moving module 14 { 1fc5000-6f35fff } -> { 1c53000-6bc3fff } [83300352]
> moving module 03 { 6f36000-7065a82 } -> { 6bc4000-6cf3a82 } [1243779]
> moving module 04 { 7066000-72b417b } -> { 6cf4000-6f4217b } [2417020]
> moving module 05 { 8053000-8b5e38f } -> { 6f43000-7a4e38f } [11580304]
> Scanning
> /home/akpolat/mysvn/l4android/l4android_x86/src/src/kernel/fiasco/build//fiasco
> -serial_esc
> Scanning
> /home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/sigma0
> Scanning
> /home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/moe
> rom/lx_ginger.cfg
> Bootloader MMAP:
> [ 0, 9fc00) RAM (1)
> [ 9fc00, a0000) reserved (2)
> [ f0000, 100000) reserved (2)
> [ 100000, bb7fe000) RAM (1)
> [ bb7fe000, bb800000) reserved (2)
> [ fffc0000, 100000000) reserved (2)
> Relocated mbi to [0x2dd000-0x2dd63f]
> Loading ndroid/l4android_x86/src/src/kernel/fiasco/build//fiasco
> Loading id/l4android_x86/src/src/l4/build/bin/x86_586/l4f/sigma0
> Loading droid/l4android_x86/src/src/l4/build/bin/x86_586/l4f/moe
> find kernel info page...
> found kernel info page at 0x400000
> Regions of list 'regions'
> [ 0, fff] { 1000} Arch BIOS
> [ 9fc00, 9ffff] { 400} Arch BIOS
> [ f0000, fffff] { 10000} Arch BIOS
> [ 100000, 10b197] { b198} Sigma0
> id/l4android_x86/src/src/l4/build/bin/x86_586/l4f/sigma0
> [ 140000, 18e21f] { 4e220} Root
> droid/l4android_x86/src/src/l4/build/bin/x86_586/l4f/moe
> [ 2d0000, 2e34a7] { 134a8} Boot bootstrap
> [ 2dd000, 2dd73c] { 73d} Root Multiboot info
> [ 300000, 38ffff] { 90000} Kern
> ndroid/l4android_x86/src/src/kernel/fiasco/build//fiasco
> [ 400000, 471fff] { 72000} Kern
> ndroid/l4android_x86/src/src/kernel/fiasco/build//fiasco
> [ 1100000, 7a4e38f] { 694e390} Root Module
> [ bb7fe000, bb7fffff] { 2000} Arch BIOS
> [ fffc0000, ffffffff] { 40000} Arch BIOS
> API Version: (87) experimental
> Sigma0 config ip:00100218 sp:002e1040
> Roottask config ip:001401f6 sp:00000000
> Starting kernel ndroid/l4android_x86/src/src/kernel/fiasco/build//fiasco
> at 003007b0
>
> Welcome to Fiasco.OC (ia32)!
> L4/Fiasco.OC ia32 microkernel (C) 1998-2012 TU Dresden
> Rev: UNKNOWN compiled with gcc 4.8.2 for Intel Pentium []
> Build: #1 Mo 21. Jul 18:56:08 CEST 2014
>
> Performance-critical config option(s) detected:
> CONFIG_NDEBUG is off
> CONFIG_NO_FRAME_PTR is off
>
> Superpages: yes
> Kmem:: cpu page at bb3e2000 (4096Bytes)
> ACPI-Init
> ACPI: RSDP[0xf09e0] r00 OEM:BOCHS.
> Boot_alloc: size=0x10
> Boot_alloc: allocated extra memory block @0xfffe5000 (size=400)
> Boot_alloc: @ 0xfffe5000
> Boot_alloc: remaining free block @ 0xfffe5010 (size=3f0)
> ACPI: RSDT[0x203ffbc1] r01 OEM:BOCHS. OEMTID:BXPCRSDT
> ACPI: FACP[0x203ff1c0] r01 OEM:BOCHS. OEMTID:BXPCFACP
> ACPI: SSDT[0x203ff234] r01 OEM:BOCHS. OEMTID:BXPCSSDT
> ACPI: APIC[0x203ffb11] r01 OEM:BOCHS. OEMTID:BXPCAPIC
> ACPI: HPET[0x203ffb89] r01 OEM:BOCHS. OEMTID:BXPCHPET
> IO-APIC: MADT = 0x203ffb11
> IO-APIC[ 0]: struct: 0x203ffb45 adr=fec00000
> Boot_alloc: size=0x1c
> Boot_alloc: @ 0xfffe5010
> Boot_alloc: remaining free block @ 0xfffe5030 (size=3d0)
> Boot_alloc: size=0x120
> Boot_alloc: @ 0xfffe5030
> Boot_alloc: remaining free block @ 0xfffe5150 (size=2b0)
> IO-APIC[ 0]: pins 24
> PIN[ 0m]: vector=20, del=0, dm=physical, dest=0 (high, edge)
> PIN[ 1m]: vector=21, del=0, dm=physical, dest=0 (high, edge)
> PIN[ 2m]: vector=22, del=0, dm=physical, dest=0 (high, edge)
> PIN[ 3m]: vector=23, del=0, dm=physical, dest=0 (high, edge)
> PIN[ 4m]: vector=24, del=0, dm=physical, dest=0 (high, edge)
> PIN[ 5m]: vector=25, del=0, dm=physical, dest=0 (high, edge)
> PIN[ 6m]: vector=26, del=0, dm=physical, dest=0 (high, edge)
> PIN[ 7m]: vector=27, del=0, dm=physical, dest=0 (high, edge)
> PIN[ 8m]: vector=28, del=0, dm=physical, dest=0 (high, edge)
> PIN[ 9m]: vector=29, del=0, dm=physical, dest=0 (high, edge)
> PIN[10m]: vector=2a, del=0, dm=physical, dest=0 (high, edge)
> PIN[11m]: vector=2b, del=0, dm=physical, dest=0 (high, edge)
> PIN[12m]: vector=2c, del=0, dm=physical, dest=0 (high, edge)
> PIN[13m]: vector=2d, del=0, dm=physical, dest=0 (high, edge)
> PIN[14m]: vector=2e, del=0, dm=physical, dest=0 (high, edge)
> PIN[15m]: vector=2f, del=0, dm=physical, dest=0 (high, edge)
> PIN[16m]: vector=30, del=0, dm=physical, dest=0 (high, edge)
> PIN[17m]: vector=31, del=0, dm=physical, dest=0 (high, edge)
> PIN[18m]: vector=32, del=0, dm=physical, dest=0 (high, edge)
> PIN[19m]: vector=33, del=0, dm=physical, dest=0 (high, edge)
> PIN[20m]: vector=34, del=0, dm=physical, dest=0 (high, edge)
> PIN[21m]: vector=35, del=0, dm=physical, dest=0 (high, edge)
> PIN[22m]: vector=36, del=0, dm=physical, dest=0 (high, edge)
> PIN[23m]: vector=37, del=0, dm=physical, dest=0 (high, edge)
> IO-APIC: dual 8259: yes
> IO-APIC: ovr[ 0] 00 -> 2
> IO-APIC: ovr[ 1] 05 -> 5
> IO-APIC: ovr[ 2] 09 -> 9
> IO-APIC: ovr[ 3] 0a -> a
> IO-APIC: ovr[ 4] 0b -> b
> Boot_alloc: size=0x4
> Boot_alloc: @ 0xfffe5150
> Boot_alloc: remaining free block @ 0xfffe5158 (size=2a8)
> Allocate cpu_mem @ 0xfffe5400
> FPU0: SSE
> Local APIC[00]: version=11 max_lvt=5
> APIC ESR value before/after enabling: 00000000/00000000
> Using the Local APIC timer on vector 90 (Periodic Mode) for scheduling
> SERIAL ESC: allocated IRQ 4 for serial uart
> Absolute KIP Syscalls using: Sysenter
> Boot_alloc: size=0x14
> Boot_alloc: @ 0xfffe5158
> Boot_alloc: remaining free block @ 0xfffe5170 (size=290)
> Boot_alloc: size=0x300
> Boot_alloc: allocated extra memory block @0xfffe5800 (size=400)
> Boot_alloc: @ 0xfffe5800
> Boot_alloc: remaining free block @ 0xfffe5b00 (size=100)
> Enable MSI support: chained IRQ mgr @ 0xfffe5150
> SERIAL ESC: allocated IRQ 4 for serial uart
> Not using serial hack in slow timer handler.
> CPU[0]: GenuineIntel (6:6:3:0)[00000663] Model: QEMU Virtual CPU version
> 2.0.0 at 2694MHz
>
> 32 KB L1 I Cache (8-way associative, 64 bytes per line)
> 32 KB L1 D Cache (8-way associative, 64 bytes per line)
> 2048 KB L2 U Cache (8-way associative, 64 bytes per line)
>
> Freeing init code/data: 28672 bytes (7 pages)
>
> Calibrating timer loop... done.
> SIGMA0: Hello!
> KIP @ 400000
> Found Fiasco: KIP syscalls: yes
> allocated 4KB for maintenance structures
> SIGMA0: Dump of all resource maps
> RAM:------------------------
> [0:1000;9efff]
> [0:10c000;13ffff]
> [4:140000;18efff]
> [0:18f000;2dcfff]
> [4:2dd000;2ddfff]
> [0:2de000;3fffff]
> [0:46b000;10fffff]
> [4:1100000;7a4efff]
> [0:7a4f000;b77fffff]
> [0:bb400000;bb7fdfff]
> IOMEM:----------------------
> [0:0;fff]
> [0:9f000;fffff]
> [0:bb7fe000;febfffff]
> [0:fec01000;fedfffff]
> [0:fee01000;ffffffff]
> IO PORTS--------------------------
> [0:0;fffffff]
> MOE: Hello world
> MOE: found 2901528 KByte free memory
> MOE: found RAM from 1000 to bb7fe000
> MOE: allocated 2999 KByte for the page array @0x46b000
> MOE: virtual user address space [0-bfffffff]
> MOE: rom name space cap -> [C:501000]
> BOOTFS: [6bc4000-6cf3a83] [C:503000] l4re
> BOOTFS: [6cf4000-6f4217c] [C:504000] ned
> BOOTFS: [6f43000-7a4e390] [C:505000] io
> BOOTFS: [1100000-12058b9] [C:506000] rtc
> BOOTFS: [1206000-162cfce] [C:507000] mag
> BOOTFS: [162d000-17a6ebe] [C:508000] fb-drv
> BOOTFS: [17a7000-17a783a] [C:509000] lx_ginger.cfg
> BOOTFS: [17a8000-17a84a4] [C:50a000] x86-legacy.devs
> BOOTFS: [17a9000-17a986f] [C:50b000] x86_android.vbus
> BOOTFS: [17aa000-1b58e47] [C:50c000] vmlinuz.android
> BOOTFS: [1b59000-1c53000] [C:50d000] root-x86-ginger.img
> BOOTFS: [1c53000-6bc4000] [C:50e000] system-x86-ginger.img
> MOE: cmdline:
> /home/akpolat/mysvn/l4android/l4android_x86/src/src/l4/build/bin/x86_586/l4f/moe
> rom/lx_ginger.cfg
> MOE: Starting: rom/ned rom/lx_ginger.cfg
> MOE: loading 'rom/ned'
> Ned says: Hi World!
> Ned: loading file: 'rom/lx_ginger.cfg'
> io | Dev_factory: register factory for N2Hw6DeviceE
> io | GTF: register factory for 7Pci_dev
> io | GTF: register factory for N2Hw12Msi_resourceE
> io | Dev_factory: register factory for N2Hw11Gpio_deviceE
> io | Io service
> io | Find root Pointer
> io | Find root Pointer: f09e0
> io | ACPI: RSDP 0xf09e0 00014 (v00 BOCHS )
> io | ACPI: RSDT 0xbb7ffbc1 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC
> 00000001)
> io |
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbff1c0,
> 0x80007d08, 0x80007d0c): UNINPLEMENTED
> io | ACPI: FACP 0xbb7ff1c0 00074 (v01 BOCHS BXPCFACP 00000001 BXPC
> 00000001)
> io |
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbfe040,
> 0x80007ce8, 0x80007cec): UNINPLEMENTED
> io | ACPI: DSDT 0xbb7fe040 01180 (v01 BOCHS BXPCDSDT 00000001 BXPC
> 00000001)
> io |
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbfe000,
> 0x80007ce8, 0x80007cec): UNINPLEMENTED
> io | ACPI: FACS 0xbb7fe000 00040
> io |
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbff234,
> 0x80007d08, 0x80007d0c): UNINPLEMENTED
> io | ACPI: SSDT 0xbb7ff234 008DD (v01 BOCHS BXPCSSDT 00000001 BXPC
> 00000001)
> io |
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbffb11,
> 0x80007d08, 0x80007d0c): UNINPLEMENTED
> io | ACPI: APIC 0xbb7ffb11 00078 (v01 BOCHS BXPCAPIC 00000001 BXPC
> 00000001)
> io |
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbffb89,
> 0x80007d08, 0x80007d0c): UNINPLEMENTED
> io | ACPI: HPET 0xbb7ffb89 00038 (v01 BOCHS BXPCHPET 00000001 BXPC
> 00000001)
> io | Parsing all Control Methods:
> io | Table [DSDT](id 0001) - 144 Objects with 18 Devices 52 Methods 8
> Regions
> io | Parsing all Control Methods:
> io | Table [SSDT](id 0002) - 155 Objects with 32 Devices 42 Methods 1
> Regions
> io | tbxfload-0274 [02] TbLoadNamespace : ACPI Tables
> successfully acquired
> io | evxfevnt-0175 [02] Enable : Transition to ACPI
> mode successful
> io | evgpeblk-0523 [04] EvCreateGpeBlock : GPE 00 to 0F [_GPE] 2
> regs on int 0x9
> io |
> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:60:AcpiOsInstallInterruptHandler(9,
> 0x107d6c0, 0x3aa8): UNINPLEMENTED
> io | Completing Region/Field/Buffer/Package
> initialization:.....................................
> io | Initialized 9/9 Regions 2/2 Fields 21/21 Buffers 5/5 Packages
> (308 nodes)
> io | Initializing Device/Processor/Thermal objects by executing _INI
> methods:
> io | Executed 0 _INI methods requiring 1 _STA executions (examined 53
> objects)
> io | ACPICA-Version:20121018, System in ACPI MODE, 32bit timer
> io | <0xb120>IRQ [00000000000000-00000000000000 1] rising edge
> (32bit) (align=0 flags=44201)
> io | <0x16b38>IRQ [00000000000000-00000000000000 1] rising edge
> (32bit) (align=0 flags=44201)
> io | Ready. Waiting for request.
> mag | Hello from MAG
> fb | Trying execution of ``set VBE mode'' using x86emu
> fb | Found VESA BIOS version 3.0
> fb | OEM SeaBIOS VBE(C) 2
>
>
>
> =
>
> Sincerly,
> Cem
>
> Cem Akpolat
>
>
> On Tue, Jul 22, 2014 at 9:54 AM, Matthias Lange <
> matthias.lange at kernkonzept.com> wrote:
>
>> Hi,
>>
>> On Mon, Jul 21, 2014 at 09:38:58PM +0200, cem akpolat wrote:
>> > Hi,
>> >
>> > I believe I should see at least an android gingerbread os in the qemu,
>> root
>> > file system console like in l4linux. I cannot the whole components that
>> I
>> > included in module.list are being loaded. Here is the module list:
>>
>> I cannot see any L4Linux log messages (like the ones in your other email)
>> in
>> your pasted log. Can you provide those, so that I can analyze the problem?
>>
>> Matthias.
>>
>> > ======
>> > modaddr 0x01100000
>> >
>> > default-kernel fiasco -serial_esc
>> > default-bootstrap bootstrap
>> >
>> > entry l4_gingerbread
>> > roottask moe rom/lx_ginger.cfg
>> > kernel fiasco -serial_esc
>> > module l4re
>> > module ned
>> > module io
>> > module rtc
>> > module mag
>> > module fb-drv
>> > module lx_ginger.cfg
>> > module x86-legacy.devs
>> > module x86_android.vbus
>> > module vmlinuz.android
>> > module root-x86-ginger.img
>> > module system-x86-ginger.img
>> > ======
>> > Normally, root-x86-ginger and system-x86 should be loaded, but I cannot
>> see
>> > them. And the lua configuration file is below, this is the same
>> > configuration file which is used in lx_ginger.iso (from l4android.org).
>> > ======
>> > require("L4");
>> >
>> > local lxname = "vmlinuz.android";
>> > local l = L4.default_loader;
>> >
>> > local io_caps = {
>> > sigma0 = L4.cast(L4.Proto.Factory,
>> L4.Env.sigma0):create(L4.Proto.Sigma0);
>> > rtc = l:new_channel():svr();
>> > con_bus = L4.default_loader:new_channel():svr();
>> > ginger_bus = L4.default_loader:new_channel():svr();
>> > fb = L4.default_loader:new_channel():svr();
>> > rom = L4.Env.rom;
>> > icu = L4.Env.icu;
>> > };
>> >
>> > local rtc_caps = {
>> > vbus = io_caps.rtc;
>> > rtc = l:new_channel():svr();
>> > rom = L4.Env.rom;
>> > sigma0 = L4.Env.sigma0;
>> > };
>> >
>> > local fb_caps = {
>> > vbus = io_caps.fb;
>> > rom = L4.Env.rom;
>> > fb = L4.default_loader:new_channel():svr();
>> > };
>> >
>> > local con_caps = {
>> > fb = fb_caps.fb;
>> > -- fb = L4.Env.vesa;
>> > vbus = io_caps.con_bus;
>> > con = L4.default_loader:new_channel():svr();
>> > rom = L4.Env.rom;
>> > };
>> >
>> > L4.default_loader:startv(
>> > {
>> > caps = io_caps,
>> > log = { "io", "red" },
>> > },
>> > "rom/io", "rom/x86-legacy.devs", "rom/x86_android.vbus");
>> >
>> > L4.default_loader:startv(
>> > {
>> > caps = rtc_caps,
>> > log = { "rtc", "blue" },
>> > },
>> > "rom/rtc");
>> >
>> > L4.default_loader:startv(
>> > {
>> > caps = fb_caps,
>> > log = { "fb", "cyan" },
>> > },
>> > "rom/fb-drv", "-m 0x117");
>> >
>> > local mag_caps = {
>> > mag = l:new_channel(),
>> > svc = l:new_channel(),
>> > };
>> >
>> > l:start({
>> > caps = {
>> > vbus = io_caps.con_bus,
>> > fb = fb_caps.fb,
>> > -- fb = L4.Env.vesa,
>> > mag = mag_caps.mag:svr(),
>> > svc = mag_caps.svc:svr(),
>> > },
>> > log = { "mag", "g" },
>> > l4re_dbg = L4.Dbg.Warn,
>> > },
>> > "rom/mag");
>> >
>> > local android_caps = {
>> > log = L4.Env.log:m("rws");
>> > vbus = io_caps.ginger_bus;
>> > rtc = rtc_caps.rtc;
>> > rom = L4.Env.rom;
>> > -- fb = con_caps.con:create(L4.Proto.Goos);
>> > fb = mag_caps.svc:create(L4.Proto.Goos, "g=640x480,10,10");
>> > };
>> >
>> > L4.default_loader:start(
>> > {
>> > caps = android_caps,
>> > l4re_dbg = L4.Dbg.Warn,
>> > log = { "android", "yellow" },
>> > },
>> > "rom/" .. lxname .. " console=ttyLv0 mem=256M
>> > l4bdds.add=rom/system-x86-ginger.img,rw l4fb.touchscreen=1
>> > androidboot.console=ttyLv0 boot=local ip=dhcp
>> > l4x_rd=rom/root-x86-ginger.img rw root=1:0 ramdisk_size=1500 init=/init
>> > --debug");
>> >
>> > ======
>> >
>> > Why aren't the other components being loaded?
>> >
>> > Br,
>> > Cem
>> >
>> > Cem Akpolat
>> >
>> >
>> > On Mon, Jul 21, 2014 at 8:38 PM, Matthias Lange <
>> > matthias.lange at kernkonzept.com> wrote:
>> >
>> > > Hi,
>> > >
>> > > what is the actual problem you encounter? I cannot spot any problem
>> from
>> > > the (incomplete?) log.
>> > >
>> > > Matthias.
>> > >
>> > > On 21.07.2014, at 17:11, cem akpolat <akpolatcem at gmail.com> wrote:
>> > >
>> > > Dear all,
>> > >
>> > >
>> > > I compiled l4android in the light of the explanation under
>> l4android.org,
>> > > however, I encountered the failure or another state that I don't know
>> what
>> > > it exactly means. It doesn't seem as an error, however, it stays
>> here. By
>> > > the way, the build.pl file provided in l4android.org doesn't work,
>> > > therefore I have compiled everything manually.
>> > >
>> > > n/x86_586/l4f/system-x86-ginger.img " -serial stdio -m 3000
>> > >
>> > > L4 Bootstrapper
>> > > Build: #1 Mo 21. Jul 16:33:27 CEST 2014, x86-32, 4.8.2
>> > > RAM: 0000000000000000 - 000000000009fbff: 639kB
>> > > RAM: 0000000000100000 - 00000000bb7fdfff: 3070968kB
>> > > Total RAM: 2999MB
>> > > Moving up to 15 modules behind 1100000
>> > > moving module 00 { 2e5000-350c3f } -> { 845a000-84c5c3f } [441408]
>> > > moving module 01 { 351000-3a4c48 } -> { 84c6000-8519c48 } [343113]
>> > > moving module 02 { 3a5000-5e6a68 } -> { 851a000-875ba68 } [2366057]
>> > > moving module 03 { 5e7000-716a82 } -> { 763f000-776ea82 } [1243779]
>> > > moving module 04 { 717000-96517b } -> { 776f000-79bd17b } [2417020]
>> > > moving module 05 { 966000-147138f } -> { 875c000-926738f }
>> [11580304]
>> > > moving module 06 { 1472000-15778b8 } -> { 1100000-12058b8 }
>> [1071289]
>> > > moving module 07 { 1578000-199efcd } -> { 1206000-162cfcd }
>> [4353998]
>> > > moving module 08 { 199f000-1b18ebd } -> { 162d000-17a6ebd }
>> [1547966]
>> > > moving module 09 { 1b19000-1b19839 } -> { 17a7000-17a7839 } [2106]
>> > > moving module 10 { 1b1a000-1b1a36b } -> { 17a8000-17a836b } [876]
>> > > moving module 11 { 1b1b000-1b1b86e } -> { 17a9000-17a986e } [2159]
>> > > moving module 12 { 1b1c000-1ecae4e } -> { 17aa000-1b58e4e }
>> [3862095]
>> > > moving module 13 { 1ecb000-1fcafff } -> { 1b59000-1c58fff }
>> [1048576]
>> > > moving module 14 { 1fcb000-763efff } -> { 1c59000-72ccfff }
>> [90652672]
>> > > moving module 03 { 763f000-776ea82 } -> { 72cd000-73fca82 }
>> [1243779]
>> > > moving module 04 { 776f000-79bd17b } -> { 73fd000-764b17b }
>> [2417020]
>> > > moving module 05 { 875c000-926738f } -> { 764c000-815738f }
>> [11580304]
>> > > Scanning
>> > >
>> /home/akpolat/mysvn/l4android/l4android/src/src/kernel/fiasco/build//fiasco
>> > > -serial_esc
>> > > Scanning
>> > >
>> /home/akpolat/mysvn/l4android/l4android/src/src/l4/build/bin/x86_586/l4f/sigma0
>> > > Scanning
>> > >
>> /home/akpolat/mysvn/l4android/l4android/src/src/l4/build/bin/x86_586/l4f/moe
>> > > rom/lx_ginger.cfg
>> > > Bootloader MMAP:
>> > > [ 0, 9fc00) RAM (1)
>> > > [ 9fc00, a0000) reserved (2)
>> > > [ f0000, 100000) reserved (2)
>> > > [ 100000, bb7fe000) RAM (1)
>> > > [ bb7fe000, bb800000) reserved (2)
>> > > [ fffc0000, 100000000) reserved (2)
>> > > Relocated mbi to [0x2dd000-0x2dd606]
>> > > Loading /l4android/l4android/src/src/kernel/fiasco/build//fiasco
>> > > Loading ndroid/l4android/src/src/l4/build/bin/x86_586/l4f/sigma0
>> > > Loading l4android/l4android/src/src/l4/build/bin/x86_586/l4f/moe
>> > > find kernel info page...
>> > > found kernel info page at 0x400000
>> > > Regions of list 'regions'
>> > > [ 0, fff] { 1000} Arch BIOS
>> > > [ 9fc00, 9ffff] { 400} Arch BIOS
>> > > [ f0000, fffff] { 10000} Arch BIOS
>> > > [ 100000, 10b197] { b198} Sigma0
>> > > ndroid/l4android/src/src/l4/build/bin/x86_586/l4f/sigma0
>> > > [ 140000, 18e21f] { 4e220} Root
>> > > l4android/l4android/src/src/l4/build/bin/x86_586/l4f/moe
>> > > [ 2d0000, 2e34a7] { 134a8} Boot bootstrap
>> > > [ 2dd000, 2dd703] { 704} Root Multiboot info
>> > > [ 300000, 38ffff] { 90000} Kern
>> > > /l4android/l4android/src/src/kernel/fiasco/build//fiasco
>> > > [ 400000, 471fff] { 72000} Kern
>> > > /l4android/l4android/src/src/kernel/fiasco/build//fiasco
>> > > [ 1100000, 815738f] { 7057390} Root Module
>> > > [ bb7fe000, bb7fffff] { 2000} Arch BIOS
>> > > [ fffc0000, ffffffff] { 40000} Arch BIOS
>> > > API Version: (87) experimental
>> > > Sigma0 config ip:00100218 sp:002e1040
>> > > Roottask config ip:001401f6 sp:00000000
>> > > Starting kernel
>> /l4android/l4android/src/src/kernel/fiasco/build//fiasco
>> > > at 003007b0
>> > >
>> > > Welcome to Fiasco.OC (ia32)!
>> > > L4/Fiasco.OC ia32 microkernel (C) 1998-2012 TU Dresden
>> > > Rev: UNKNOWN compiled with gcc 4.8.2 for Intel Pentium []
>> > > Build: #1 Mo 21. Jul 16:36:47 CEST 2014
>> > >
>> > > Performance-critical config option(s) detected:
>> > > CONFIG_NDEBUG is off
>> > > CONFIG_NO_FRAME_PTR is off
>> > >
>> > > Superpages: yes
>> > > Kmem:: cpu page at bb3e2000 (4096Bytes)
>> > > ACPI-Init
>> > > ACPI: RSDP[0xf09e0] r00 OEM:BOCHS.
>> > > Boot_alloc: size=0x10
>> > > Boot_alloc: allocated extra memory block @0xfffe5000 (size=400)
>> > > Boot_alloc: @ 0xfffe5000
>> > > Boot_alloc: remaining free block @ 0xfffe5010 (size=3f0)
>> > > ACPI: RSDT[0x203ffbc1] r01 OEM:BOCHS. OEMTID:BXPCRSDT
>> > > ACPI: FACP[0x203ff1c0] r01 OEM:BOCHS. OEMTID:BXPCFACP
>> > > ACPI: SSDT[0x203ff234] r01 OEM:BOCHS. OEMTID:BXPCSSDT
>> > > ACPI: APIC[0x203ffb11] r01 OEM:BOCHS. OEMTID:BXPCAPIC
>> > > ACPI: HPET[0x203ffb89] r01 OEM:BOCHS. OEMTID:BXPCHPET
>> > > IO-APIC: MADT = 0x203ffb11
>> > > IO-APIC[ 0]: struct: 0x203ffb45 adr=fec00000
>> > > Boot_alloc: size=0x1c
>> > > Boot_alloc: @ 0xfffe5010
>> > > Boot_alloc: remaining free block @ 0xfffe5030 (size=3d0)
>> > > Boot_alloc: size=0x120
>> > > Boot_alloc: @ 0xfffe5030
>> > > Boot_alloc: remaining free block @ 0xfffe5150 (size=2b0)
>> > > IO-APIC[ 0]: pins 24
>> > > PIN[ 0m]: vector=20, del=0, dm=physical, dest=0 (high, edge)
>> > > PIN[ 1m]: vector=21, del=0, dm=physical, dest=0 (high, edge)
>> > > PIN[ 2m]: vector=22, del=0, dm=physical, dest=0 (high, edge)
>> > > PIN[ 3m]: vector=23, del=0, dm=physical, dest=0 (high, edge)
>> > > PIN[ 4m]: vector=24, del=0, dm=physical, dest=0 (high, edge)
>> > > PIN[ 5m]: vector=25, del=0, dm=physical, dest=0 (high, edge)
>> > > PIN[ 6m]: vector=26, del=0, dm=physical, dest=0 (high, edge)
>> > > PIN[ 7m]: vector=27, del=0, dm=physical, dest=0 (high, edge)
>> > > PIN[ 8m]: vector=28, del=0, dm=physical, dest=0 (high, edge)
>> > > PIN[ 9m]: vector=29, del=0, dm=physical, dest=0 (high, edge)
>> > > PIN[10m]: vector=2a, del=0, dm=physical, dest=0 (high, edge)
>> > > PIN[11m]: vector=2b, del=0, dm=physical, dest=0 (high, edge)
>> > > PIN[12m]: vector=2c, del=0, dm=physical, dest=0 (high, edge)
>> > > PIN[13m]: vector=2d, del=0, dm=physical, dest=0 (high, edge)
>> > > PIN[14m]: vector=2e, del=0, dm=physical, dest=0 (high, edge)
>> > > PIN[15m]: vector=2f, del=0, dm=physical, dest=0 (high, edge)
>> > > PIN[16m]: vector=30, del=0, dm=physical, dest=0 (high, edge)
>> > > PIN[17m]: vector=31, del=0, dm=physical, dest=0 (high, edge)
>> > > PIN[18m]: vector=32, del=0, dm=physical, dest=0 (high, edge)
>> > > PIN[19m]: vector=33, del=0, dm=physical, dest=0 (high, edge)
>> > > PIN[20m]: vector=34, del=0, dm=physical, dest=0 (high, edge)
>> > > PIN[21m]: vector=35, del=0, dm=physical, dest=0 (high, edge)
>> > > PIN[22m]: vector=36, del=0, dm=physical, dest=0 (high, edge)
>> > > PIN[23m]: vector=37, del=0, dm=physical, dest=0 (high, edge)
>> > > IO-APIC: dual 8259: yes
>> > > IO-APIC: ovr[ 0] 00 -> 2
>> > > IO-APIC: ovr[ 1] 05 -> 5
>> > > IO-APIC: ovr[ 2] 09 -> 9
>> > > IO-APIC: ovr[ 3] 0a -> a
>> > > IO-APIC: ovr[ 4] 0b -> b
>> > > Boot_alloc: size=0x4
>> > > Boot_alloc: @ 0xfffe5150
>> > > Boot_alloc: remaining free block @ 0xfffe5158 (size=2a8)
>> > > Allocate cpu_mem @ 0xfffe5400
>> > > FPU0: SSE
>> > > Local APIC[00]: version=11 max_lvt=5
>> > > APIC ESR value before/after enabling: 00000000/00000000
>> > > Using the Local APIC timer on vector 90 (Periodic Mode) for scheduling
>> > > SERIAL ESC: allocated IRQ 4 for serial uart
>> > > Absolute KIP Syscalls using: Sysenter
>> > > Boot_alloc: size=0x14
>> > > Boot_alloc: @ 0xfffe5158
>> > > Boot_alloc: remaining free block @ 0xfffe5170 (size=290)
>> > > Boot_alloc: size=0x300
>> > > Boot_alloc: allocated extra memory block @0xfffe5800 (size=400)
>> > > Boot_alloc: @ 0xfffe5800
>> > > Boot_alloc: remaining free block @ 0xfffe5b00 (size=100)
>> > > Enable MSI support: chained IRQ mgr @ 0xfffe5150
>> > > SERIAL ESC: allocated IRQ 4 for serial uart
>> > > Not using serial hack in slow timer handler.
>> > > CPU[0]: GenuineIntel (6:6:3:0)[00000663] Model: QEMU Virtual CPU
>> version
>> > > 2.0.0 at 2694MHz
>> > >
>> > > 32 KB L1 I Cache (8-way associative, 64 bytes per line)
>> > > 32 KB L1 D Cache (8-way associative, 64 bytes per line)
>> > > 2048 KB L2 U Cache (8-way associative, 64 bytes per line)
>> > >
>> > > Freeing init code/data: 28672 bytes (7 pages)
>> > >
>> > > Calibrating timer loop... done.
>> > > SIGMA0: Hello!
>> > > KIP @ 400000
>> > > Found Fiasco: KIP syscalls: yes
>> > > allocated 4KB for maintenance structures
>> > > SIGMA0: Dump of all resource maps
>> > > RAM:------------------------
>> > > [0:1000;9efff]
>> > > [0:10c000;13ffff]
>> > > [4:140000;18efff]
>> > > [0:18f000;2dcfff]
>> > > [4:2dd000;2ddfff]
>> > > [0:2de000;3fffff]
>> > > [0:46b000;10fffff]
>> > > [4:1100000;8157fff]
>> > > [0:8158000;b77fffff]
>> > > [0:bb400000;bb7fdfff]
>> > > IOMEM:----------------------
>> > > [0:0;fff]
>> > > [0:9f000;fffff]
>> > > [0:bb7fe000;febfffff]
>> > > [0:fec01000;fedfffff]
>> > > [0:fee01000;ffffffff]
>> > > IO PORTS--------------------------
>> > > [0:0;fffffff]
>> > > MOE: Hello world
>> > > MOE: found 2894324 KByte free memory
>> > > MOE: found RAM from 1000 to bb7fe000
>> > > MOE: allocated 2999 KByte for the page array @0x46b000
>> > > MOE: virtual user address space [0-bfffffff]
>> > > MOE: rom name space cap -> [C:501000]
>> > > BOOTFS: [72cd000-73fca83] [C:503000] l4re
>> > > BOOTFS: [73fd000-764b17c] [C:504000] ned
>> > > BOOTFS: [764c000-8157390] [C:505000] io
>> > > BOOTFS: [1100000-12058b9] [C:506000] rtc
>> > > BOOTFS: [1206000-162cfce] [C:507000] mag
>> > > BOOTFS: [162d000-17a6ebe] [C:508000] fb-drv
>> > > BOOTFS: [17a7000-17a783a] [C:509000] lx_ginger.cfg
>> > > BOOTFS: [17a8000-17a836c] [C:50a000] x86-legacy.devs
>> > > BOOTFS: [17a9000-17a986f] [C:50b000] x86_android.vbus
>> > > BOOTFS: [17aa000-1b58e4f] [C:50c000] vmlinuz.android
>> > > BOOTFS: [1b59000-1c59000] [C:50d000] root-x86-ginger.img
>> > > BOOTFS: [1c59000-72cd000] [C:50e000] system-x86-ginger.img
>> > > MOE: cmdline:
>> > >
>> /home/akpolat/mysvn/l4android/l4android/src/src/l4/build/bin/x86_586/l4f/moe
>> > > rom/lx_ginger.cfg
>> > > MOE: Starting: rom/ned rom/lx_ginger.cfg
>> > > MOE: loading 'rom/ned'
>> > > Ned says: Hi World!
>> > > Ned: loading file: 'rom/lx_ginger.cfg'
>> > > io | Dev_factory: register factory for N2Hw6DeviceE
>> > > io | GTF: register factory for 7Pci_dev
>> > > io | GTF: register factory for N2Hw12Msi_resourceE
>> > > io | Dev_factory: register factory for N2Hw11Gpio_deviceE
>> > > io | Io service
>> > > io | Find root Pointer
>> > > io | Find root Pointer: f09e0
>> > > io | ACPI: RSDP 0xf09e0 00014 (v00 BOCHS )
>> > > io | ACPI: RSDT 0xbb7ffbc1 00034 (v01 BOCHS BXPCRSDT 00000001
>> BXPC
>> > > 00000001)
>> > > io |
>> > >
>> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/
>> > > osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbff1c0, 0x80007d08,
>> > > 0x80007d0c): UNINPLEMENTED
>> > > io | ACPI: FACP 0xbb7ff1c0 00074 (v01 BOCHS BXPCFACP 00000001
>> BXPC
>> > > 00000001)
>> > > io |
>> > >
>> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/
>> > > osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbfe040, 0x80007ce8,
>> > > 0x80007cec): UNINPLEMENTED
>> > > io | ACPI: DSDT 0xbb7fe040 01180 (v01 BOCHS BXPCDSDT 00000001
>> BXPC
>> > > 00000001)
>> > > io |
>> > >
>> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/
>> > > osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbfe000, 0x80007ce8,
>> > > 0x80007cec): UNINPLEMENTED
>> > > io | ACPI: FACS 0xbb7fe000 00040
>> > > io |
>> > >
>> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/
>> > > osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbff234, 0x80007d08,
>> > > 0x80007d0c): UNINPLEMENTED
>> > > io | ACPI: SSDT 0xbb7ff234 008DD (v01 BOCHS BXPCSSDT 00000001
>> BXPC
>> > > 00000001)
>> > > io |
>> > >
>> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/
>> > > osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbffb11, 0x80007d08,
>> > > 0x80007d0c): UNINPLEMENTED
>> > > io | ACPI: APIC 0xbb7ffb11 00078 (v01 BOCHS BXPCAPIC 00000001
>> BXPC
>> > > 00000001)
>> > > io |
>> > >
>> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/
>> > > osl-basic.cc:344:AcpiOsPhysicalTableOverride(0xbffb89, 0x80007d08,
>> > > 0x80007d0c): UNINPLEMENTED
>> > > io | ACPI: HPET 0xbb7ffb89 00038 (v01 BOCHS BXPCHPET 00000001
>> BXPC
>> > > 00000001)
>> > > io | Parsing all Control Methods:
>> > > io | Table [DSDT](id 0001) - 144 Objects with 18 Devices 52
>> Methods 8
>> > > Regions
>> > > io | Parsing all Control Methods:
>> > > io | Table [SSDT](id 0002) - 155 Objects with 32 Devices 42
>> Methods 1
>> > > Regions
>> > > io | tbxfload-0274 [02] TbLoadNamespace : ACPI Tables
>> > > successfully acquired
>> > > io | evxfevnt-0175 [02] Enable : Transition to
>> ACPI
>> > > mode successful
>> > > io | evgpeblk-0523 [04] EvCreateGpeBlock : GPE 00 to 0F
>> [_GPE] 2
>> > > regs on int 0x9
>> > > io |
>> > >
>> /home/akpolat/mysvn/l4android/l4android/src/src/l4/pkg/acpica/lib-acpi/src/
>> > > osl-basic.cc:60:AcpiOsInstallInterruptHandler(9, 0x107d6c0, 0x3aa8):
>> > > UNINPLEMENTED
>> > > io | Completing Region/Field/Buffer/Package
>> > > initialization:.....................................
>> > > io | Initialized 9/9 Regions 2/2 Fields 21/21 Buffers 5/5
>> Packages
>> > > (308 nodes)
>> > > io | Initializing Device/Processor/Thermal objects by executing
>> _INI
>> > > methods:
>> > > io | Executed 0 _INI methods requiring 1 _STA executions
>> (examined 53
>> > > objects)
>> > > io | ACPICA-Version:20121018, System in ACPI MODE, 32bit timer
>> > > io | <0xb120>IRQ [00000000000000-00000000000000 1] rising
>> edge
>> > > (32bit) (align=0 flags=44201)
>> > > io | <0x16b38>IRQ [00000000000000-00000000000000 1] rising
>> edge
>> > > (32bit) (align=0 flags=44201)
>> > > io | Ready. Waiting for request.
>> > > mag | Hello from MAG
>> > > fb | Trying execution of ``set VBE mode'' using x86emu
>> > > fb | Found VESA BIOS version 3.0
>> > > fb | OEM SeaBIOS VBE(C) 2011
>> > > rtc | Date:21.07.2014 Time:15:05:38
>> > >
>> > > Best Regards,
>> > > Cem Akpolat
>> > > _______________________________________________
>> > > l4-hackers mailing list
>> > > l4-hackers at os.inf.tu-dresden.de
>> > > http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers
>> > >
>> > >
>> > > matthias.lange at kernkonzept.com <michael.hohmuth at kernkonzept.com> -
>> Tel.
>> > > 0351-41 888 614
>> > >
>> > > Kernkonzept GmbH. Sitz: Dresden. Amtsgericht Dresden, HRB 31129.
>> > > Geschäftsführer: Dr.-Ing. Michael Hohmuth
>> > >
>> > >
>>
>> --
>> Matthias Lange, matthias.lange at kernkonzept.com, +49 - 351 - 41 88 86 14
>>
>> Kernkonzept GmbH. Sitz: Dresden. Amtsgericht Dresden, HRB 31129.
>> Geschäftsführer: Dr.-Ing. Michael Hohmuth
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://os.inf.tu-dresden.de/pipermail/l4-hackers/attachments/20140722/40e498ce/attachment.htm>
More information about the l4-hackers
mailing list