L4Linux network and SD Access

Matthias Lange matthias.lange at kernkonzept.com
Sun Jul 9 18:17:47 CEST 2017


Hi,

On 07/08/2017 01:41 AM, Daniel (Xiaolong) Wang wrote:
> Hi Adam,
> 
> I setup CONFIG_L4_SERVER, I checked using nm the result is:
> 
> *00000800 W l4x_srv_init*
> *00000804 t l4x_srv_init_resolver*
> 
> I also tested without the CONFIG_L4_SERVER, it works with out
> CONFIG_L4_SERVER. However I could not see the the MMC under /dev folder
> or under /sys/device. Does that mean the IO configuration file I
> specified does not work?

The setup looks ok. In io's log output you can see that e.g. the edma
and the mmc1 device both have a client. You can increase io's log
verboseness by adding more (up to seven) '-v' switches. Eventually you
will get the vbus configuration printed.

The reason you don't see any MMC device in /dev is that L4Linux does not
know about the physical devices (yet). You have to pass in a device tree
(FDT) using the 'l4x_dtb' kernel command line option e.g.

 l4x_dtb=rom/your_device_tree.dtb

Don't forget to add the device tree to your entry in the modules.list
file. Also make sure to enable CONFIG_USE_OF in your L4Linux configuration.

Best,
Matthias.

> 
> The IO stil shows “no 'iommu' capability found use CPU-phys for DMA” and
> a warning “warning: could not register control interface at cap
> 'platform_ctl'"
> 
> Attachment is the newest configuration file:
> ************* l4linux.cfg *************
> local L4 = require("L4");
> 
> local loader = L4.default_loader;
> 
> local lxname = "vmlinuz"
> 
> -- start io
> local vbus_l4linux = loader:new_channel();
> local vbus_input = loader:new_channel();
> 
> loader:start(
>   {
>     caps = {
>         sigma0  = L4.cast(L4.Proto.Factory,
> L4.Env.sigma0):create(L4.Proto.Sigma0);
>         icu = L4.Env.icu;
>         input = vbus_input:svr();
>         l4linux = vbus_l4linux:svr();
>     },
>     log = {"IO", "magenta"},
>   }, 
>   "rom/io -vvv rom/l4linux.devs rom/l4linux.io <http://l4linux.io>"
> );
> 
> 
> loader:start(
>   {
>     caps = {
>         vbus = vbus_l4linux;
>     },
>     l4re_dbg = L4.Dbg.Warn,
>     log = L4.Env.log:m("rws");
>   },
>   "rom/vmlinuz mem=128M console=ttyLv0 l4x_rd=rom/ramdisk-"
>   .. L4.Info.arch() .. ".rd root=1:0 ramdisk_size=4000 showpfexc=1
> showghost=1 print-fatal-signals=1"
> );
> 
> ************* l4linux.devs *************
> local Res = Io.Res
> local Hw = Io.Hw
> 
> Io.hw_add_devices(function()
> 
> Io.hw_add_devices(function()
>     prcm = Hw.Device(function()
>         compatible = {"ti,am3-prcm"};
>         Resource.regs = Res.mmio(0x44e00000, 0x44e03fff);
>     end);
> 
>    edma = Hw.Device(function()
>         Property.hid = "EDMA";
>         compatible = {"ti,edma3"};
>         Resource.regs = Res.mmio(0x49000000, 0x4900ffff);
>         Resource.regs = Res.mmio(0x44e10f90, 0x44e10fcf);
>         Resource.irqA = Res.irq(12);
>         Resource.irqB = Res.irq(13);
>         Resource.irqC = Res.irq(14);
>     end);
> 
>     mmc1 = Hw.Device(function()
>         Property.hid = "MMC1";
>         compatible = {"ti,omap4-hsmmc"};
>         Resource.regs = Res.mmio(0x48060000, 0x48060fff);
>         Resource.irq = Res.irq(64);
>         Property.flags = Io.Hw_device_DF_dma_supported;
>     end);
> 
>     i2c0 = Hw.Device(function()
>         Property.hid = "omap4-i2c0";
>         compatible = {"ti,omap4-i2c"};
>         Resource.regs = Res.mmio(0x44e0b000, 0x44e0bfff);
>         Resource.irq = Res.irq(70);
>     end);
> end)
> 
> ************* l4linux.io <http://l4linux.io> *************
> local hw = Io.system_bus()
> 
> 
> Io.add_vbus("l4linux", Io.Vi.System_bus
> {
>   prcm = wrap(hw:match("ti,am3-prcm"));
>   edma = wrap(hw:match("ti,edma3"));
>   mmc1 = wrap(hw:mmc1);
>   -- mmc2 = wrap(hw:mmc2);
>   -- mmc3 = wrap(hw:mmc3);
>   i2c0 = wrap(hw:i2c0);
>   -- i2c1 = wrap(hw:i2c1);
> })
> 
> ************* Booting info *************
> Starting kernel ...
> 
> 
> L4 Bootstrapper
>   Build: #47 Fri Jul  7 19:33:01 EDT 2017, 4.7.3
>   Scanning up to 256 MB RAM, starting at offset 32MB
>   Memory size is 256MB (80000000 - 8fffffff)
>   RAM: 0000000080000000 - 000000008fffffff: 262144kB
>   Total RAM: 256MB
>   Scanning fiasco
>   Scanning sigma0
>   Scanning moe
>   Moving up to 11 modules behind 81100000
>   moving module 02 { 81978000-819a149f } -> { 81a68000-81a9149f } [169120]
>   moving module 01 { 81966000-8197733b } -> { 81a56000-81a6733b } [70460]
>   moving module 00 { 818e4000-81965017 } -> { 819d4000-81a55017 } [528408]
>   moving module 10 { 815e4000-818e3fff } -> { 816d4000-819d3fff } [3145728]
>   moving module 09 { 811fa000-815e347b } -> { 812ea000-816d347b } [4101244]
>   moving module 08 { 81087000-811f98c7 } -> { 81177000-812e98c7 } [1517768]
>   moving module 07 { 8102d000-810866ab } -> { 8111d000-811766ab } [366252]
>   moving module 06 { 81013000-8102c463 } -> { 81103000-8111c463 } [103524]
>   moving module 05 { 81012000-81012a0a } -> { 81102000-81102a0a } [2571]
>   moving module 04 { 81011000-8101123d } -> { 81101000-8110123d } [574]
>   moving module 03 { 81010000-8101032d } -> { 81100000-8110032d } [814]
>   Loading fiasco
>   Loading sigma0
>   Loading moe
>   find kernel info page...
>   found kernel info page (via ELF) at 80002000
> Regions of list 'regions'
>     [ 80000000,  80000187] {      188} Root   mbi_rt
>     [ 80001000,  80001b7f] {      b80} Kern   fiasco
>     [ 80002000,  8008efff] {    8d000} Kern   fiasco
>     [ 800c0000,  800c9cfb] {     9cfc} Sigma0 sigma0
>     [ 800d0000,  800d6177] {     6178} Sigma0 sigma0
>     [ 80140000,  8016eff3] {    2eff4} Root   moe
>     [ 81000000,  8100f5a3] {     f5a4} Boot   bootstrap
>     [ 81100000,  819d3fff] {   8d4000} Root   Module
>   found kernel options (via ELF) at 80003000
>   API Version: (87) experimental
>   Sigma0 config    ip:800c0100 sp:00000000
>   Roottask config  ip:80140260 sp:00000000
>   Starting kernel fiasco at 80001350
> Hello from Startup::stage2
> FPU: Initialize
> FPU0: Subarch: 3, Part: 30, Rev: 3, Var: c, Impl: 41
> SERIAL ESC: allocated IRQ 72 for serial uart
> Not using serial hack in slow timer handler.
> Welcome to L4/Fiasco.OC!
> L4/Fiasco.OC microkernel on arm
> Rev: unknown compiled with gcc 4.7.3 for AM33xx    []
> Build: #1 Mon Jun 26 12:21:04 EDT 2017
> 
> Calibrating timer loop... done.
> MDB: use page size: 20
> MDB: use page size: 12
> SIGMA0: Hello!
>   KIP @ 80002000
>   allocated 4KB for maintenance structures
> SIGMA0: Dump of all resource maps
> RAM:------------------------
> [4:80000000;80000fff]
> [0:8008f000;800bffff]
> [0:800ca000;800cffff]
> [0:800d7000;8013ffff]
> [4:80140000;8016efff]
> [0:8016f000;810fffff]
> [4:81100000;819d3fff]
> [0:819d4000;8effffff]
> IOMEM:----------------------
> [0:0;7fffffff]
> [0:90000000;ffffffff]
> MOE: Hello world
> MOE: found 235892 KByte free memory
> MOE: found RAM from 80000000 to 8f000000
> MOE: allocated 240 KByte for the page array @0x800d7000
> MOE: virtual user address space [0-bfffffff]
> MOE: rom name space cap -> [C:103000]
>   BOOTFS: [81100000-8110032e] [C:105000] l4linux.cfg
>   BOOTFS: [81101000-8110123e] [C:107000] l4linux.io <http://l4linux.io>
>   BOOTFS: [81102000-81102a0b] [C:109000] l4linux.devs
>   BOOTFS: [81103000-8111c464] [C:10b000] l4re
>   BOOTFS: [8111d000-811766ac] [C:10d000] ned
>   BOOTFS: [81177000-812e98c8] [C:10f000] io
>   BOOTFS: [812ea000-816d347c] [C:111000] vmlinuz
>   BOOTFS: [816d4000-819d4000] [C:113000] ramdisk-arm.rd
> MOE: cmdline: moe rom/l4linux.cfg
> MOE: Starting: rom/ned rom/l4linux.cfg
> MOE: loading 'rom/ned'
> Ned says: Hi World!
> Ned: loading file: 'rom/l4linux.cfg'
> *IO      | Io service*
> *IO      | Verboseness level: 4*
> *IO      | unused physical memory space:*
> *IO      |   [00000000000000-0000007fffffff]*
> *IO      |   [00000090000000-000000ffffffff]*
> *IO      | no 'iommu' capability found use CPU-phys for DMA*
> *IO      | Loading: config 'rom/l4linux.devs'*
> *IO      | warning: inconsistent fixed resource @ device: /System Bus/*
> *IO      |   : hid=MMC1*
> *IO      |   DMADOM  [00000000000000-00000000000000 1] non-pref (32bit)
> (align=0 flags=6)*
> *IO      | Loading: config 'rom/l4linux.io <http://l4linux.io>'*
> *IO      | Real Hardware -----------------------------------*
> *IO      | System Bus: hid=*
> *IO      |   Resources: ==== start ====*
> *IO      |   DMADOM  [00000000000000-00000000000000 1] non-pref (32bit)
> (align=0 flags=6)*
> *IO      |   Resources: ===== end =====*
> *IO      |   mmc1: hid=MMC1*
> *IO      |     Clients: ===== start ====*
> *IO      |       mmc1: [N2Vi9Proxy_devE]*
> *IO      |     Clients: ===== end ====*
> *IO      |     Resources: ==== start ====*
> *IO      |     IOMEM   [00000048060000-00000048060fff 1000] non-pref
> (32bit) (align=fff flags=2)*
> *IO      |     IRQ     [00000000000040-00000000000040 1] none (32bit)
> (align=0 flags=1)*
> *IO      |     DMADOM  [00000000000000-00000000000000 1] non-pref
> (32bit) (align=0 flags=6)*
> *IO      |     Resources: ===== end =====*
> *IO      |   prcm: hid=*
> *IO      |     Clients: ===== start ====*
> *IO      |       prcm: [N2Vi9Proxy_devE]*
> *IO      |     Clients: ===== end ====*
> *IO      |     Resources: ==== start ====*
> *IO      |     IOMEM   [00000044e00000-00000044e03fff 4000] non-pref
> (32bit) (align=3fff flags=2)*
> *IO      |     Resources: ===== end =====*
> *IO      |   edma: hid=EDMA*
> *IO      |     Clients: ===== start ====*
> *IO      |       edma: [N2Vi9Proxy_devE]*
> *IO      |     Clients: ===== end ====*
> *IO      |     Resources: ==== start ====*
> *IO      |     IOMEM   [00000044e10f90-00000044e10fcf 40] non-pref
> (32bit) (align=3f flags=2)*
> *IO      |     IRQ     [0000000000000e-0000000000000e 1] none (32bit)
> (align=0 flags=1)*
> *IO      |     Resources: ===== end =====*
> *IO      |   i2c0: hid=omap4-i2c0*
> *IO      |     Clients: ===== start ====*
> *IO      |       i2c0: [N2Vi9Proxy_devE]*
> *IO      |     Clients: ===== end ====*
> *IO      |     Resources: ==== start ====*
> *IO      |     IOMEM   [00000044e0b000-00000044e0bfff 1000] non-pref
> (32bit) (align=fff flags=2)*
> *IO      |     IRQ     [00000000000046-00000000000046 1] none (32bit)
> (align=0 flags=1)*
> *IO      |     Resources: ===== end =====*
> *IO      | warning: could not register control interface at cap
> 'platform_ctl'*
> *IO      | Ready. Waiting for request.*
> PH  0 offs=00008000 flags=rwx PH-type=0x1
>       virt=02000000 evirt=0245743c
>       phys=02000000 ephys=0245743c
>       f_sz=003ce3d5 memsz=0045743c
> PH  1 offs=003889a4 flags=r-x PH-type=0x4
>       virt=023809a4 evirt=023809c8
>       phys=023809a4 ephys=023809c8
>       f_sz=00000024 memsz=00000024
> PH  2 offs=00000000 flags=rwx PH-type=0x6474e551
>       virt=00000000 evirt=00000000
>       phys=00000000 ephys=00000000
>       f_sz=00000000 memsz=00000000
> Starting binary at 0x2000310, argc=9 argv=0xafff4f84 *argv=0xb1007ff4
> argv0=rom/vmlinuz
> External resolver is at 0xa80007fc
> ======> L4Linux starting... <========
> Linux version 4.7.0-l4 (daniel at daniel-ubuntu14) (gcc version 4.7.3
> (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #4 Fri Jul 7 19:22:05 EDT 2017
> Binary name: rom/vmlinuz
>    This is an AEABI build.
> Linux kernel command line (8 args): mem=128M console=ttyLv0
> l4x_rd=rom/ramdisk-arm.rd root=1:0 ramdisk_size=4000 showpfexc=1
> showghost=1 print-fatal-signals=1
> CPU mapping (l:p)[1]: 0:0
> Image: 02000000 - 02600000 [6144 KiB].
> Areas: Text:     02000000 - 023809c8 [3586kB]
>        RO-Data:  022a5000 - 02368000 [780kB]
>        Data:     023a6000 - 023c9540 [141kB]
>        Init:     02381000 - 023a6000 [148kB]
>        BSS:      023ce3d5 - 0245743c [548kB]
> Device scan:
>   Device: L4ICU
>   Device: edma
>     MEM: 44e10f90 - 44e10fcf
>     IRQ: 0000000e - 0000000e
>   Device: i2c0
>     MEM: 44e0b000 - 44e0bfff
>     IRQ: 00000046 - 00000046
>   Device: mmc1
>     MEM: 48060000 - 48060fff
>     IRQ: 00000040 - 00000040
>     DMAD: 00000000 - 00000000
>   Device: prcm
>     MEM: 44e00000 - 44e03fff
> Device scan done.
> l4lx_thread_create: Created thread 41d (cpu0) (u:b3000e00, v:b3000c00,
> sp:023a7fa4)
> main thread will be 41d
> L4x: section-with-init(-data): Virt: 0x2000000 to 0x2457fff [4448 KiB]
> section-with-init(-data): Phys: 0x80176000 to 0x805cdfff, [4448 KiB]
> L4x: section-with-init-text: Virt: 0x2000000 to 0x2457fff [4448 KiB]
> error: failed to get physical address for 2000000.
> L4x: Main thread running, waiting...
> L4x: Memory size: 128MB
> L4x: Setting superpages for main memory
> L4x: Adjusted memory start: 02000000
> L4x:     Main memory: Virt: 0x2600000 to 0xa5fffff [131072 KiB]
>     Main memory: Phys: 0x81a00000 to 0x899fffff, [131072 KiB]
> l4x: vmalloc area: 0a600000 - 12600000
> L4x:            text: Virt: 0x2000000 to 0x2457fff [4448 KiB]
> error: failed to get physical address for 2000000.
> Loading: rom/ramdisk-arm.rd
> INITRD: Size of RAMdisk is 3072KiB
> RAMdisk from 00002000 to 00302000 [3072KiB]
> l4lx_thread_create: Created thread 422 (timer0) (u:b3000a00, v:00000000,
> sp:023effa0)
> Booting Linux on physical CPU 0x0
> Linux version 4.7.0-l4 (daniel at daniel-ubuntu14) (gcc version 4.7.3
> (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #4 Fri Jul 7 19:22:05 EDT 2017
> CPU: Fiasco [413fc082] revision 2 (ARMv7), cr=00400000
> CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
> Machine: L4
> Ignoring unrecognised tag 0x00000000
> Memory policy: Data cache writealloc
> CPU: All CPU(s) started in SVC mode.
> INITRD: 00002000 - 00302000
> Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 33973
> Kernel command line: mem=128M console=ttyLv0 l4x_rd=rom/ramdisk-arm.rd
> root=1:0 ramdisk_size=4000 showpfexc=1 showghost=1 print-fatal-signals=1
> PID hash table entries: 1024 (order: 0, 4096 bytes)
> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> Memory: 129696K/137220K available (2806K kernel code, 141K rwdata, 780K
> rodata, 148K init, 548K bss, 7524K reserved, 0K cma-reserved)
> Virtual kernel memory layout:
>     vector  : 0xbffff000 - 0xc0000000   (   4 kB)
>     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
>     vmalloc : 0x0a600000 - 0x12600000   ( 128 MB)
>     lowmem  : 0x00000000 - 0x0a600000   ( 166 MB)
>     modules : 0x01010000 - 0x02000000   (  15 MB)
>       .text : 0x02000000 - 0x023809c8   (3587 kB)
>       .init : 0x02381000 - 0x023a6000   ( 148 kB)
>       .data : 0x023a6000 - 0x023c9540   ( 142 kB)
>        .bss : 0x023ce3d5 - 0x0245743c   ( 549 kB)
> NR_IRQS:282
> clocksource: l4kipclk: mask: 0xffffffffffffffff max_cycles: 0x1d854df40,
> max_idle_ns: 3526361616960 ns
> l4timer: Using IRQ210
> sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every
> 2199023255500ns
> Console: colour dummy device 80x30
> console [ttyLv0] enabled
> Calibrating delay loop... 990.41 BogoMIPS (lpj=4952064)
> pid_max: default: 32768 minimum: 301
> Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
> Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
> CPU: Testing write buffer coherency: ok
> Setting up static identity map for 0x2000000 - 0x2000000
> VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
> clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
> max_idle_ns: 19112604462750000 ns
> NET: Registered protocol family 16
> DMA: preallocated 256 KiB pool for atomic coherent allocations
> Failed to create "l4x" debugfs directory: 1
> clocksource: Switched to clocksource l4kipclk
> NET: Registered protocol family 2
> TCP established hash table entries: 2048 (order: 1, 8192 bytes)
> TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
> TCP: Hash tables configured (established 2048 bind 2048)
> UDP hash table entries: 256 (order: 0, 4096 bytes)
> UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
> NET: Registered protocol family 1
> Trying to unpack rootfs image as initramfs...
> rootfs image is not initramfs (junk in compressed archive); looks like
> an initrd
> INITRD: Freeing memory.
> l4x: Checks passed.
> NetWinder Floating Point Emulator V0.97 (double precision)
> futex hash table entries: 256 (order: -1, 3072 bytes)
> workingset: timestamp_bits=29 max_order=15 bucket_order=0
> io scheduler noop registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> L4 serial driver
> serial-ttyLv.0: ttyLv0 at MMIO 0x1 (irq = 211, base_baud = 230400) is a
> L4-vcon
> l4ser_shm: L4 shared mem serial driver
> l4cdds: No name given, not starting.
> brd: module loaded
> l4bdds: No name given, not starting.
> mousedev: PS/2 mouse device common for all mice
> NET: Registered protocol family 17
> L4IRQ: set irq type of 211 to 1
> RAMDISK: ext2 filesystem found at block 0
> RAMDISK: Loading 3072KiB [1 disk] into ram disk... done.
> EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
> EXT4-fs (ram0): mounting ext2 file system using the ext4 subsystem
> EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
> VFS: Mounted root (ext2 filesystem) readonly on device 1:0.
> Freeing unused kernel memory: 148K (02381000 - 023a6000)
> This architecture does not have kernel memory protection.
> 
> Please press Enter to activate this console.
> 
> Thanks
> -Dan
> 
>> On Jul 7, 2017, at 6:08 PM, Adam Lackorzynski
>> <adam at os.inf.tu-dresden.de <mailto:adam at os.inf.tu-dresden.de>> wrote:
>>
>>
>> On Fri Jul 07, 2017 at 16:49:35 -0500, Daniel (Xiaolong) Wang wrote:
>>> Many thanks to Matthias and Adam. With you help I was able to get
>>> some progress on BeagleBone Black. Here is what I have:
>>>
>>> ********* l4linux.cfg *********
>>> local L4 = require("L4");
>>>
>>> local loader = L4.default_loader;
>>>
>>> local lxname = "vmlinuz"
>>>
>>> -- start io
>>> local vbus_l4linux = loader:new_channel();
>>> local vbus_input = loader:new_channel();
>>>
>>> loader:start(
>>>  {
>>>    caps = {
>>>        sigma0  = L4.cast(L4.Proto.Factory,
>>> L4.Env.sigma0):create(L4.Proto.Sigma0);
>>>        icu = L4.Env.icu;
>>>        input = vbus_input:svr();
>>>        l4linux = vbus_l4linux:svr();
>>>    },
>>>    log = {"IO", "magenta"},
>>>  }, 
>>>  "rom/io rom/l4linux.io <http://l4linux.io>"
>>> );
>>>
>>>
>>> loader:start(
>>>  {
>>>    caps = {
>>>        vbus = vbus_l4linux;
>>>    },
>>>    l4re_dbg = L4.Dbg.Warn,
>>>    log = L4.Env.log:m("rws");
>>>  },
>>>  "rom/vmlinuz mem=128M console=ttyLv0 lvx_rd=rom/ramdisk-"
>>>  .. L4.Info.arch() .. ".rd root=1:0 ramdisk_size=4000"
>>> );
>>>
>>> ********* l4linux.devs ********* (according
>>> to https://github.com/beagleboard/devicetree-source/blob/master/arch/arm/boot/dts/am33xx.dtsi<https://github.com/beagleboard/devicetree-source/blob/master/arch/arm/boot/dts/am33xx.dtsi>)
>>> local Res = Io.Res
>>> local Hw = Io.Hw
>>>
>>> Io.hw_add_devices(function()
>>>
>>>    prcm = Hw.Device(function()
>>>        compatible = {"ti,am3-prcm"};
>>>        Resource.regs = Res.mmio(0x44e00000, 0x44e03fff);
>>>    end);
>>>
>>>    edma = Hw.Device(function()
>>>        Property.hid = "EDMA";
>>>        compatible = {"ti,edma3"};
>>>        Resource.regs = Res.mmio(0x49000000, 0x4900ffff);
>>>        Resource.regs = Res.mmio(0x44e10f90, 0x44e10fcf);
>>>        Resource.irq = Res.irq(12);
>>>        Resource.irq = Res.irq(13);
>>>        Resource.irq = Res.irq(14);
>>>    end);
>>>
>>>    mmc1 = Hw.Device(function()
>>>        Property.hid = "MMC1";
>>>        compatible = {"ti,omap4-hsmmc"};
>>>        Resource.regs = Res.mmio(0x48060000, 0x48060fff);
>>>        Resource.irq = Res.irq(64);
>>> --        Property.flags = Io.Hw_device_DF_dma_supported;
>>>    end);
>>>
>>>    mmc2 = Hw.Device(function()
>>>        Property.hid = "MMC2";
>>>        compatible = {"ti,omap4-hsmmc"};
>>>        Resource.regs = Res.mmio(0x481d8000, 0x481d8fff);
>>>        Resource.irq = Res.irq(28);
>>> --        Property.flags = Io.Hw_device_DF_dma_supported;
>>>    end);
>>>
>>>    mmc3 = Hw.Device(function()
>>>        Property.hid = "MMC3";
>>>        compatible = {"ti,omap4-hsmmc"};
>>>        Resource.regs = Res.mmio(0x47810000, 0x47810fff);
>>>        Resource.irq = Res.irq(29);
>>> --        Property.flags = Io.Hw_device_DF_dma_supported;
>>>    end);
>>>
>>>    i2c0 = Hw.Device(function()
>>>        Property.hid = "omap4-i2c0";
>>>        compatible = {"ti,omap4-i2c"};
>>>        Resource.regs = Res.mmio(0x44e0b000, 0x44e0bfff);
>>>        Resource.irq = Res.irq(70);
>>>    end);
>>>
>>>    i2c1 = Hw.Device(function()
>>>        Property.hid = "omap4-i2c1";
>>>        compatible = {"ti,omap3-i2c"};
>>>        Resource.regs = Res.mmio(0x4802a000, 0x4802afff);
>>>        Resource.irq = Res.irq(71);
>>>    end);
>>> end)
>>>
>>> ********* l4linux.io <http://l4linux.io/> ********* 
>>> local hw = Io.system_bus()
>>>
>>>
>>> Io.add_vbus("l4linux", Io.Vi.System_bus
>>> {
>>>  prcm = wrap(hw:match("ti,am3-prcm"));
>>>  edma = wrap(hw:match("ti,edma3"));
>>>  mmc1 = wrap(hw:match("ti,omap4-hsmmc","MMC1"));
>>>  mmc2 = wrap(hw:match("ti,omap4-hsmmc","MMC2"));
>>>  mmc3 = wrap(hw:match("ti,omap4-hsmmc","MMC3"));
>>>  i2c0 = wrap(hw:match("ti,omap4-i2c","omap4-i2c0"));
>>>  i2c1 = wrap(hw:match("ti,omap4-i2c","omap4-i2c1"));
>>> })
>>
>> You're matching too much here (see IO's complaints below).
>> Only do
>>  mmc1 = wrap(hw.mmc1);
>>  mmc2 = wrap(hw.mmc2);
>>  mmc3 = wrap(hw.mmc3);
>>  i2c0 = wrap(hw.i2c0);
>>  i2c1 = wrap(hw.i2c1);
>> (or only match for that pattern that matches once).
>>
>>> However after I run the uimage on the board the system just hang…
>>>
>>> Starting kernel ...
>>>
>>> L4 Bootstrapper
>>>  Build: #32 Fri Jul  7 17:37:33 EDT 2017, 4.7.3
>>>  Scanning up to 256 MB RAM, starting at offset 32MB
>>>  Memory size is 256MB (80000000 - 8fffffff)
>>>  RAM: 0000000080000000 - 000000008fffffff: 262144kB
>>>  Total RAM: 256MB
>>>  Scanning fiasco
>>>  Scanning sigma0
>>>  Scanning moe
>>>  Moving up to 11 modules behind 81100000
>>>  moving module 02 { 819e0000-81a0949f } -> { 81ad0000-81af949f } [169120]
>>>  moving module 01 { 819ce000-819df33b } -> { 81abe000-81acf33b } [70460]
>>>  moving module 00 { 8194c000-819cd017 } -> { 81a3c000-81abd017 } [528408]
>>>  moving module 10 { 8164c000-8194bfff } -> { 8173c000-81a3bfff }
>>> [3145728]
>>>  moving module 09 { 811fa000-8164b47b } -> { 812ea000-8173b47b }
>>> [4527228]
>>>  moving module 08 { 81087000-811f98c7 } -> { 81177000-812e98c7 }
>>> [1517768]
>>>  moving module 07 { 8102d000-810866ab } -> { 8111d000-811766ab } [366252]
>>>  moving module 06 { 81013000-8102c463 } -> { 81103000-8111c463 } [103524]
>>>  moving module 05 { 81012000-810129d0 } -> { 81102000-811029d0 } [2513]
>>>  moving module 04 { 81011000-810112be } -> { 81101000-811012be } [703]
>>>  moving module 03 { 81010000-810102ff } -> { 81100000-811002ff } [768]
>>>  Loading fiasco
>>>  Loading sigma0
>>>  Loading moe
>>>  find kernel info page...
>>>  found kernel info page (via ELF) at 80002000
>>> Regions of list 'regions'
>>>    [ 80000000,  80000187] {      188} Root   mbi_rt
>>>    [ 80001000,  80001b7f] {      b80} Kern   fiasco
>>>    [ 80002000,  8008efff] {    8d000} Kern   fiasco
>>>    [ 800c0000,  800c9cfb] {     9cfc} Sigma0 sigma0
>>>    [ 800d0000,  800d6177] {     6178} Sigma0 sigma0
>>>    [ 80140000,  8016eff3] {    2eff4} Root   moe
>>>    [ 81000000,  8100f5a3] {     f5a4} Boot   bootstrap
>>>    [ 81100000,  81a3bfff] {   93c000} Root   Module
>>>  found kernel options (via ELF) at 80003000
>>>  API Version: (87) experimental
>>>  Sigma0 config    ip:800c0100 sp:00000000
>>>  Roottask config  ip:80140260 sp:00000000
>>>  Starting kernel fiasco at 80001350
>>> Hello from Startup::stage2
>>> FPU: Initialize
>>> FPU0: Subarch: 3, Part: 30, Rev: 3, Var: c, Impl: 41
>>> SERIAL ESC: allocated IRQ 72 for serial uart
>>> Not using serial hack in slow timer handler.
>>> Welcome to L4/Fiasco.OC!
>>> L4/Fiasco.OC microkernel on arm
>>> Rev: unknown compiled with gcc 4.7.3 for AM33xx    []
>>> Build: #1 Mon Jun 26 12:21:04 EDT 2017
>>>
>>> Calibrating timer loop... done.
>>> MDB: use page size: 20
>>> MDB: use page size: 12
>>> SIGMA0: Hello!
>>>  KIP @ 80002000
>>>  allocated 4KB for maintenance structures
>>> SIGMA0: Dump of all resource maps
>>> RAM:------------------------
>>> [4:80000000;80000fff]
>>> [0:8008f000;800bffff]
>>> [0:800ca000;800cffff]
>>> [0:800d7000;8013ffff]
>>> [4:80140000;8016efff]
>>> [0:8016f000;810fffff]
>>> [4:81100000;81a3bfff]
>>> [0:81a3c000;8effffff]
>>> IOMEM:----------------------
>>> [0:0;7fffffff]
>>> [0:90000000;ffffffff]
>>> MOE: Hello world
>>> MOE: found 235476 KByte free memory
>>> MOE: found RAM from 80000000 to 8f000000
>>> MOE: allocated 240 KByte for the page array @0x800d7000
>>> MOE: virtual user address space [0-bfffffff]
>>> MOE: rom name space cap -> [C:103000]
>>>  BOOTFS: [81100000-81100300] [C:105000] l4linux.cfg
>>>  BOOTFS: [81101000-811012bf] [C:107000] l4linux.io <http://l4linux.io/>
>>>  BOOTFS: [81102000-811029d1] [C:109000] l4linux.devs
>>>  BOOTFS: [81103000-8111c464] [C:10b000] l4re
>>>  BOOTFS: [8111d000-811766ac] [C:10d000] ned
>>>  BOOTFS: [81177000-812e98c8] [C:10f000] io
>>>  BOOTFS: [812ea000-8173b47c] [C:111000] vmlinuz
>>>  BOOTFS: [8173c000-81a3c000] [C:113000] ramdisk-arm.rd
>>> MOE: cmdline: moe rom/l4linux.cfg
>>> MOE: Starting: rom/ned rom/l4linux.cfg
>>> MOE: loading 'rom/ned'
>>> Ned says: Hi World!
>>> Ned: loading file: 'rom/l4linux.cfg'
>>> IO      | Io service
>>> IO      | Verboseness level: 4
>>> IO      | unused physical memory space:
>>> IO      |   [00000000000000-0000007fffffff]
>>> IO      |   [00000090000000-000000ffffffff]
>>> IO      | no 'iommu' capability found use CPU-phys for DMA
>>> IO      | Loading: config 'rom/l4linux.devs'
>>> IO      | Loading: config 'rom/l4linux.io <http://l4linux.io/>'
>>> IO      | WARNING: device 'mmc1' already assigned to another virtual bus.
>>> IO      | WARNING: device 'mmc1' already assigned to another virtual bus.
>>> IO      | WARNING: device 'mmc2' already assigned to another virtual bus.
>>> IO      | WARNING: device 'mmc2' already assigned to another virtual bus.
>>> IO      | WARNING: device 'mmc3' already assigned to another virtual bus.
>>> IO      | WARNING: device 'mmc3' already assigned to another virtual bus.
>>> IO      | WARNING: device 'mmc1' already assigned to another virtual bus.
>>> IO      | WARNING: device 'mmc1' already assigned to another virtual bus.
>>> IO      | WARNING: device 'mmc2' already assigned to another virtual bus.
>>> IO      | WARNING: device 'mmc2' already assigned to another virtual bus.
>>> IO      | WARNING: device 'mmc3' already assigned to another virtual bus.
>>> IO      | WARNING: device 'mmc3' already assigned to another virtual bus.
>>> IO      | WARNING: device 'i2c0' already assigned to another virtual bus.
>>> IO      | WARNING: device 'i2c0' already assigned to another virtual bus.
>>> IO      | Real Hardware -----------------------------------
>>> IO      | System Bus: hid=
>>> IO      |   Resources: ==== start ====
>>> IO      |   DMADOM  [00000000000000-00000000000000 1] non-pref
>>> (32bit) (align=0 flags=6)
>>> IO      |   Resources: ===== end =====
>>> IO      |   mmc1: hid=MMC1
>>> IO      |     Clients: ===== start ====
>>> IO      |       mmc3[1]: [N2Vi9Proxy_devE]
>>> IO      |       mmc2[1]: [N2Vi9Proxy_devE]
>>> IO      |       mmc1[1]: [N2Vi9Proxy_devE]
>>> IO      |     Clients: ===== end ====
>>> IO      |     Resources: ==== start ====
>>> IO      |     IOMEM   [00000048060000-00000048060fff 1000] non-pref
>>> (32bit) (align=fff flags=2)
>>> IO      |     IRQ     [00000000000040-00000000000040 1] none (32bit)
>>> (align=0 flags=1)
>>> IO      |     Resources: ===== end =====
>>> IO      |   i2c1: hid=omap4-i2c1
>>> IO      |     Clients: ===== start ====
>>> IO      |       i2c1[1]: [N2Vi9Proxy_devE]
>>> IO      |     Clients: ===== end ====
>>> IO      |     Resources: ==== start ====
>>> IO      |     IOMEM   [0000004802a000-0000004802afff 1000] non-pref
>>> (32bit) (align=fff flags=2)
>>> IO      |     IRQ     [00000000000047-00000000000047 1] none (32bit)
>>> (align=0 flags=1)
>>> IO      |     Resources: ===== end =====
>>> IO      |   mmc2: hid=MMC2
>>> IO      |     Clients: ===== start ====
>>> IO      |       mmc3[2]: [N2Vi9Proxy_devE]
>>> IO      |       mmc2[2]: [N2Vi9Proxy_devE]
>>> IO      |       mmc1[2]: [N2Vi9Proxy_devE]
>>> IO      |     Clients: ===== end ====
>>> IO      |     Resources: ==== start ====
>>> IO      |     IOMEM   [000000481d8000-000000481d8fff 1000] non-pref
>>> (32bit) (align=fff flags=2)
>>> IO      |     IRQ     [0000000000001c-0000000000001c 1] none (32bit)
>>> (align=0 flags=1)
>>> IO      |     Resources: ===== end =====
>>> IO      |   mmc3: hid=MMC3
>>> IO      |     Clients: ===== start ====
>>> IO      |       mmc3[3]: [N2Vi9Proxy_devE]
>>> IO      |       mmc2[3]: [N2Vi9Proxy_devE]
>>> IO      |       mmc1[3]: [N2Vi9Proxy_devE]
>>> IO      |     Clients: ===== end ====
>>> IO      |     Resources: ==== start ====
>>> IO      |     IOMEM   [00000047810000-00000047810fff 1000] non-pref
>>> (32bit) (align=fff flags=2)
>>> IO      |     IRQ     [0000000000001d-0000000000001d 1] none (32bit)
>>> (align=0 flags=1)
>>> IO      |     Resources: ===== end =====
>>> IO      |   edma: hid=EDMA
>>> IO      |     Clients: ===== start ====
>>> IO      |       edma: [N2Vi9Proxy_devE]
>>> IO      |     Clients: ===== end ====
>>> IO      |     Resources: ==== start ====
>>> IO      |     IOMEM   [00000044e10f90-00000044e10fcf 40] non-pref
>>> (32bit) (align=3f flags=2)
>>> IO      |     IRQ     [0000000000000e-0000000000000e 1] none (32bit)
>>> (align=0 flags=1)
>>> IO      |     Resources: ===== end =====
>>> IO      |   i2c0: hid=omap4-i2c0
>>> IO      |     Clients: ===== start ====
>>> IO      |       i2c1[2]: [N2Vi9Proxy_devE]
>>> IO      |       i2c0: [N2Vi9Proxy_devE]
>>> IO      |     Clients: ===== end ====
>>> IO      |     Resources: ==== start ====
>>> IO      |     IOMEM   [00000044e0b000-00000044e0bfff 1000] non-pref
>>> (32bit) (align=fff flags=2)
>>> IO      |     IRQ     [00000000000046-00000000000046 1] none (32bit)
>>> (align=0 flags=1)
>>> IO      |     Resources: ===== end =====
>>> IO      |   prcm: hid=
>>> IO      |     Clients: ===== start ====
>>> IO      |       prcm: [N2Vi9Proxy_devE]
>>> IO      |     Clients: ===== end ====
>>> IO      |     Resources: ==== start ====
>>> IO      |     IOMEM   [00000044e00000-00000044e03fff 4000] non-pref
>>> (32bit) (align=3fff flags=2)
>>> IO      |     Resources: ===== end =====
>>> IO      | warning: conflicting virtual clients:
>>> IO      |   /l4linux/mmc2[1]
>>> IO      |   /l4linux/mmc3[1]
>>> IO      | warning: conflicting virtual clients:
>>> IO      |   /l4linux/mmc1[1]
>>> IO      |   /l4linux/mmc3[1]
>>> IO      | warning: conflicting virtual clients:
>>> IO      |   /l4linux/mmc1[1]
>>> IO      |   /l4linux/mmc2[1]
>>> IO      | warning: conflicting virtual clients:
>>> IO      |   /l4linux/mmc2[2]
>>> IO      |   /l4linux/mmc3[2]
>>> IO      | warning: conflicting virtual clients:
>>> IO      |   /l4linux/mmc1[2]
>>> IO      |   /l4linux/mmc3[2]
>>> IO      | warning: conflicting virtual clients:
>>> IO      |   /l4linux/mmc1[2]
>>> IO      |   /l4linux/mmc2[2]
>>> IO      | warning: conflicting virtual clients:
>>> IO      |   /l4linux/mmc2[3]
>>> IO      |   /l4linux/mmc3[3]
>>> IO      | warning: conflicting virtual clients:
>>> IO      |   /l4linux/mmc1[3]
>>> IO      |   /l4linux/mmc3[3]
>>> IO      | warning: conflicting virtual clients:
>>> IO      |   /l4linux/mmc1[3]
>>> IO      |   /l4linux/mmc2[3]
>>> IO      | warning: conflicting virtual clients:
>>> IO      |   /l4linux/i2c0
>>> IO      |   /l4linux/i2c1[2]
>>> IO      | warning: could not register control interface at cap
>>> 'platform_ctl'
>>> IO      | Ready. Waiting for request.
>>> PH  0 offs=00008000 flags=rwx PH-type=0x1
>>>      virt=02000000 evirt=024bd81c
>>>      phys=02000000 ephys=024bd81c
>>>      f_sz=00435512 memsz=004bd81c
>>> PH  1 offs=003eb0c8 flags=r-x PH-type=0x4
>>>      virt=023e30c8 evirt=023e30ec
>>>      phys=023e30c8 ephys=023e30ec
>>>      f_sz=00000024 memsz=00000024
>>> PH  2 offs=00000000 flags=rwx PH-type=0x6474e551
>>>      virt=00000000 evirt=00000000
>>>      phys=00000000 ephys=00000000
>>>      f_sz=00000000 memsz=00000000
>>> Starting binary at 0x2000318, argc=7 argv=0xafff4f8c *argv=0xb1007ff4
>>> argv0=rom/vmlinuz
>>> External resolver is at 0xa80007fc
>>> Symbol 'l4x_srv_init' not found
>>> L4Re[rm]: unhandled read page fault at 0x4 pc=0x0
>>> L4Re: unhandled exception: pc=0x0 (pfa=0)
>>> L4Re: Global::l4re_aux->ldr_flags=0
>>>
>>> At this point I have no idea what to do any help will be much
>>> appreciated! Thank you very much!
>>
>> Ok, now that's strange, that should not happen. In L4Linux, do you have
>> CONFIG_L4_SERVER enabled or disabled? Does arch/l4/kernel/main.o contain
>> the l4x_srv_init symbol or not
>> (check with 'nm arch/l4/kernel/main.o | grep l4x_srv_init')?
>>
>>
>>
>> Adam
>>
>>>
>>> Thanks
>>> -Dan
>>>> On Jun 29, 2017, at 3:39 PM, Matthias Lange
>>>> <matthias.lange at kernkonzept.com
>>>> <mailto:matthias.lange at kernkonzept.com>> wrote:
>>>>
>>>> Hi,
>>>>
>>>> On 06/29/2017 10:11 PM, Daniel (Xiaolong) Wang wrote:
>>>>> Hi all,
>>>>>
>>>>> I want to give L4Linux access to SD card, and ethernet driver.
>>>>> Initially I thought by run L4Linux kernel on top of L4re, drivers
>>>>> built with L4Linux kernel can just work. After trying and reading the
>>>>> email archive, seems like I need to configure the corresponding
>>>>> capability in cfg. I’m very new to L4re environment is there any
>>>>> tutorials or references that can help me understand it better? (I’m
>>>>> currently reading the manual, my development board is a beagle bone
>>>>> black)
>>>>
>>>> In case of ARM platforms this is (still) not an easy undertaking. What
>>>> you have to do is basically this:
>>>>
>>>> 1. Enable the desired device drivers in your kernel configuration.
>>>> 2. Make L4Linux compile.
>>>> 3. Create a device tree which contains the device nodes of the desired
>>>> devices.
>>>> 4. Create an io configuration for L4Re with the devices and their
>>>> resources and assign the desired devices to a vbus which is eventually
>>>> given to L4Linux. You can read about io and its configuration here [1].
>>>> 5. Boot your setup on the target. At this stage, you usually you have to
>>>> instrument the device driver to debug the reasons why it is failing.
>>>>
>>>> Best,
>>>> Matthias.
>>>>
>>>> [1] http://l4re.org/doc/io.html <http://l4re.org/doc/io.html>
>>>>
>>>>>
>>>>> Also I’m trying to build a L4Linux with MMC driver. My configuration
>>>>> is based on default arm_defconfig. I enabled
>>>>>
>>>>> * Make Linux be a Server * Bus driver for L4vbus * L4shm based
>>>>> network driver * MMC/SD/SDIO card support -> HW reset support for
>>>>> eMMC, MMC block device driver, Use bounce buffer for simple hosts,
>>>>> SDIO UART/GPS class support, Secure Digital Host Controller Interface
>>>>> Support, SDHCI platform and OF driver helper, MediaTek SD/MMC Card
>>>>> Interface support * DOS/FAT/NT Filesystem -> MSDOS fs support, VFAT
>>>>> fs support
>>>>>
>>>>> however, when it build the following errors show did I do something
>>>>> wrong?
>>>>>
>>>>> LD      drivers/i2c/busses/built-in.o LD
>>>>> drivers/i2c/muxes/built-in.o LD      drivers/i2c/built-in.o LD
>>>>> drivers/idle/built-in.o CC      drivers/input/input.o CC
>>>>> drivers/input/input-compat.o CC      drivers/input/input-mt.o CC
>>>>> drivers/input/ff-core.o LD      drivers/input/input-core.o CC
>>>>> drivers/input/mousedev.o CC      drivers/input/evdev.o LD
>>>>> drivers/input/built-in.o LD      drivers/iommu/built-in.o CC
>>>>> drivers/irqchip/irqchip.o LD      drivers/irqchip/built-in.o LD
>>>>> drivers/leds/built-in.o LD      drivers/lguest/built-in.o LD
>>>>> drivers/macintosh/built-in.o LD
>>>>> drivers/media/common/b2c2/built-in.o LD
>>>>> drivers/media/common/saa7146/built-in.o LD
>>>>> drivers/media/common/siano/built-in.o LD
>>>>> drivers/media/common/v4l2-tpg/built-in.o LD
>>>>> drivers/media/common/built-in.o LD
>>>>> drivers/media/firewire/built-in.o LD
>>>>> drivers/media/i2c/soc_camera/built-in.o LD
>>>>> drivers/media/i2c/built-in.o LD
>>>>> drivers/media/mmc/siano/built-in.o LD
>>>>> drivers/media/mmc/built-in.o LD
>>>>> drivers/media/pci/b2c2/built-in.o LD
>>>>> drivers/media/pci/ddbridge/built-in.o LD
>>>>> drivers/media/pci/dm1105/built-in.o LD
>>>>> drivers/media/pci/mantis/built-in.o LD
>>>>> drivers/media/pci/netup_unidvb/built-in.o LD
>>>>> drivers/media/pci/ngene/built-in.o LD
>>>>> drivers/media/pci/pluto2/built-in.o LD
>>>>> drivers/media/pci/pt1/built-in.o LD
>>>>> drivers/media/pci/pt3/built-in.o LD
>>>>> drivers/media/pci/saa7146/built-in.o LD
>>>>> drivers/media/pci/smipcie/built-in.o LD
>>>>> drivers/media/pci/ttpci/built-in.o LD
>>>>> drivers/media/pci/built-in.o LD
>>>>> drivers/media/platform/omap/built-in.o LD
>>>>> drivers/media/platform/built-in.o LD
>>>>> drivers/media/rc/keymaps/built-in.o LD
>>>>> drivers/media/rc/built-in.o LD      drivers/media/tuners/built-in.o 
>>>>> LD      drivers/media/usb/b2c2/built-in.o LD
>>>>> drivers/media/usb/dvb-usb/built-in.o LD
>>>>> drivers/media/usb/dvb-usb-v2/built-in.o LD
>>>>> drivers/media/usb/s2255/built-in.o LD
>>>>> drivers/media/usb/siano/built-in.o LD
>>>>> drivers/media/usb/stkwebcam/built-in.o LD
>>>>> drivers/media/usb/ttusb-budget/built-in.o LD
>>>>> drivers/media/usb/ttusb-dec/built-in.o LD
>>>>> drivers/media/usb/zr364xx/built-in.o LD
>>>>> drivers/media/usb/built-in.o LD      drivers/media/built-in.o LD
>>>>> drivers/mfd/built-in.o LD      drivers/misc/cb710/built-in.o LD
>>>>> drivers/misc/eeprom/built-in.o LD
>>>>> drivers/misc/lis3lv02d/built-in.o LD
>>>>> drivers/misc/mic/bus/built-in.o LD      drivers/misc/mic/built-in.o 
>>>>> LD      drivers/misc/ti-st/built-in.o LD
>>>>> drivers/misc/built-in.o CC      drivers/mmc/card/block.o CC
>>>>> drivers/mmc/card/queue.o LD      drivers/mmc/card/mmc_block.o CC
>>>>> drivers/mmc/card/sdio_uart.o LD      drivers/mmc/card/built-in.o CC
>>>>> drivers/mmc/core/core.o CC      drivers/mmc/core/bus.o CC
>>>>> drivers/mmc/core/host.o CC      drivers/mmc/core/mmc.o CC
>>>>> drivers/mmc/core/mmc_ops.o CC      drivers/mmc/core/sd.o CC
>>>>> drivers/mmc/core/sd_ops.o CC      drivers/mmc/core/sdio.o CC
>>>>> drivers/mmc/core/sdio_ops.o CC      drivers/mmc/core/sdio_bus.o CC
>>>>> drivers/mmc/core/sdio_cis.o CC      drivers/mmc/core/sdio_io.o CC
>>>>> drivers/mmc/core/sdio_irq.o CC      drivers/mmc/core/quirks.o CC
>>>>> drivers/mmc/core/slot-gpio.o CC      drivers/mmc/core/pwrseq.o CC
>>>>> drivers/mmc/core/debugfs.o LD      drivers/mmc/core/mmc_core.o CC
>>>>> drivers/mmc/core/pwrseq_simple.o CC
>>>>> drivers/mmc/core/pwrseq_emmc.o LD      drivers/mmc/core/built-in.o CC
>>>>> drivers/mmc/host/sdhci.o CC      drivers/mmc/host/mtk-sd.o CC
>>>>> drivers/mmc/host/sdhci-pltfm.o CC
>>>>> drivers/mmc/host/sdhci-of-arasan.o CC
>>>>> drivers/mmc/host/sdhci-of-at91.o LD      drivers/mmc/host/built-in.o 
>>>>> LD      drivers/mmc/built-in.o CC      drivers/net/Space.o CC
>>>>> drivers/net/loopback.o CC      drivers/net/l4shmnet.o LD
>>>>> drivers/net/built-in.o LD      drivers/nfc/built-in.o LD
>>>>> drivers/nvme/host/built-in.o LD      drivers/nvme/built-in.o CC
>>>>> drivers/of/base.o CC      drivers/of/device.o CC
>>>>> drivers/of/platform.o CC      drivers/of/fdt.o CC
>>>>> drivers/of/fdt_address.o CC      drivers/of/address.o CC
>>>>> drivers/of/irq.o CC      drivers/of/of_reserved_mem.o LD
>>>>> drivers/of/built-in.o LD      drivers/platform/built-in.o LD
>>>>> drivers/power/built-in.o LD      drivers/pwm/built-in.o CC
>>>>> drivers/rtc/rtc-lib.o LD      drivers/rtc/built-in.o LD
>>>>> drivers/soc/bcm/built-in.o LD      drivers/soc/fsl/built-in.o LD
>>>>> drivers/soc/built-in.o CC      drivers/tty/tty_io.o CC
>>>>> drivers/tty/n_tty.o CC      drivers/tty/tty_ioctl.o CC
>>>>> drivers/tty/tty_ldisc.o CC      drivers/tty/tty_buffer.o CC
>>>>> drivers/tty/tty_port.o CC      drivers/tty/tty_mutex.o CC
>>>>> drivers/tty/tty_ldsem.o CC      drivers/tty/pty.o CC
>>>>> drivers/tty/sysrq.o LD      drivers/tty/ipwireless/built-in.o CC
>>>>> drivers/tty/serial/serial_core.o CC      drivers/tty/serial/l4ser.o 
>>>>> CC      drivers/tty/serial/l4ser_shm.o LD
>>>>> drivers/tty/serial/built-in.o CC      drivers/tty/vt/vt_ioctl.o CC
>>>>> drivers/tty/vt/vc_screen.o CC      drivers/tty/vt/selection.o CC
>>>>> drivers/tty/vt/keyboard.o CC      drivers/tty/vt/consolemap.o CC
>>>>> drivers/tty/vt/consolemap_deftbl.o CC      drivers/tty/vt/vt.o CC
>>>>> drivers/tty/vt/defkeymap.o LD      drivers/tty/vt/built-in.o LD
>>>>> drivers/tty/built-in.o LD      drivers/video/backlight/built-in.o CC
>>>>> drivers/video/console/dummycon.o CC
>>>>> drivers/video/console/fbcon.o CC
>>>>> drivers/video/console/bitblit.o CC
>>>>> drivers/video/console/softcursor.o LD
>>>>> drivers/video/console/built-in.o CC
>>>>> drivers/video/fbdev/core/fb_cmdline.o CC
>>>>> drivers/video/fbdev/core/fb_notify.o CC
>>>>> drivers/video/fbdev/core/fbmem.o CC
>>>>> drivers/video/fbdev/core/fbmon.o CC
>>>>> drivers/video/fbdev/core/fbcmap.o CC
>>>>> drivers/video/fbdev/core/fbsysfs.o CC
>>>>> drivers/video/fbdev/core/modedb.o CC
>>>>> drivers/video/fbdev/core/fbcvt.o LD
>>>>> drivers/video/fbdev/core/fb.o LD
>>>>> drivers/video/fbdev/core/built-in.o LD
>>>>> drivers/video/fbdev/omap2/omapfb/displays/built-in.o LD
>>>>> drivers/video/fbdev/omap2/omapfb/dss/built-in.o LD
>>>>> drivers/video/fbdev/omap2/omapfb/built-in.o LD
>>>>> drivers/video/fbdev/omap2/built-in.o LD
>>>>> drivers/video/fbdev/built-in.o CC      drivers/video/logo/logo.o LOGO
>>>>> drivers/video/logo/logo_linux_mono.c CC
>>>>> drivers/video/logo/logo_linux_mono.o LOGO
>>>>> drivers/video/logo/logo_linux_vga16.c CC
>>>>> drivers/video/logo/logo_linux_vga16.o LOGO
>>>>> drivers/video/logo/logo_linux_clut224.c CC
>>>>> drivers/video/logo/logo_linux_clut224.o LD
>>>>> drivers/video/logo/built-in.o LOGO
>>>>> drivers/video/logo/logo_superh_mono.c LOGO
>>>>> drivers/video/logo/clut_vga16.c LOGO
>>>>> drivers/video/logo/logo_blackfin_vga16.c LOGO
>>>>> drivers/video/logo/logo_superh_vga16.c LOGO
>>>>> drivers/video/logo/logo_blackfin_clut224.c LOGO
>>>>> drivers/video/logo/logo_dec_clut224.c LOGO
>>>>> drivers/video/logo/logo_m32r_clut224.c LOGO
>>>>> drivers/video/logo/logo_mac_clut224.c LOGO
>>>>> drivers/video/logo/logo_parisc_clut224.c LOGO
>>>>> drivers/video/logo/logo_sgi_clut224.c LOGO
>>>>> drivers/video/logo/logo_spe_clut224.c LOGO
>>>>> drivers/video/logo/logo_sun_clut224.c LOGO
>>>>> drivers/video/logo/logo_superh_clut224.c LD
>>>>> drivers/video/built-in.o LD      drivers/built-in.o LD
>>>>> sound/built-in.o LD      firmware/built-in.o CC
>>>>> arch/l4/drivers/vbus/l4vbus.o LD
>>>>> arch/l4/drivers/vbus/built-in.o CC      arch/l4/drivers/events.o LD
>>>>> arch/l4/drivers/built-in.o CC      net/socket.o LD
>>>>> net/802/built-in.o CC      net/core/sock.o CC
>>>>> net/core/request_sock.o CC      net/core/skbuff.o CC
>>>>> net/core/datagram.o CC      net/core/stream.o CC      net/core/scm.o 
>>>>> CC      net/core/gen_stats.o CC      net/core/gen_estimator.o CC
>>>>> net/core/net_namespace.o CC      net/core/secure_seq.o CC
>>>>> net/core/flow_dissector.o CC      net/core/sysctl_net_core.o CC
>>>>> net/core/dev.o CC      net/core/ethtool.o CC
>>>>> net/core/dev_addr_lists.o CC      net/core/dst.o CC
>>>>> net/core/netevent.o CC      net/core/neighbour.o CC
>>>>> net/core/rtnetlink.o CC      net/core/utils.o CC
>>>>> net/core/link_watch.o CC      net/core/filter.o CC
>>>>> net/core/sock_diag.o CC      net/core/dev_ioctl.o CC
>>>>> net/core/tso.o CC      net/core/sock_reuseport.o CC
>>>>> net/core/flow.o CC      net/core/net-sysfs.o CC
>>>>> net/core/net-procfs.o LD      net/core/built-in.o CC
>>>>> net/ethernet/eth.o LD      net/ethernet/built-in.o CC
>>>>> net/ipv4/route.o CC      net/ipv4/inetpeer.o CC
>>>>> net/ipv4/protocol.o CC      net/ipv4/ip_input.o CC
>>>>> net/ipv4/ip_fragment.o CC      net/ipv4/ip_forward.o CC
>>>>> net/ipv4/ip_options.o CC      net/ipv4/ip_output.o CC
>>>>> net/ipv4/ip_sockglue.o CC      net/ipv4/inet_hashtables.o CC
>>>>> net/ipv4/inet_timewait_sock.o CC
>>>>> net/ipv4/inet_connection_sock.o CC      net/ipv4/tcp.o CC
>>>>> net/ipv4/tcp_input.o CC      net/ipv4/tcp_output.o CC
>>>>> net/ipv4/tcp_timer.o CC      net/ipv4/tcp_ipv4.o CC
>>>>> net/ipv4/tcp_minisocks.o CC      net/ipv4/tcp_cong.o CC
>>>>> net/ipv4/tcp_metrics.o CC      net/ipv4/tcp_fastopen.o CC
>>>>> net/ipv4/tcp_recovery.o CC      net/ipv4/tcp_offload.o CC
>>>>> net/ipv4/datagram.o CC      net/ipv4/raw.o CC      net/ipv4/udp.o CC
>>>>> net/ipv4/udplite.o CC      net/ipv4/udp_offload.o CC
>>>>> net/ipv4/arp.o CC      net/ipv4/icmp.o CC      net/ipv4/devinet.o CC
>>>>> net/ipv4/af_inet.o CC      net/ipv4/igmp.o CC
>>>>> net/ipv4/fib_frontend.o CC      net/ipv4/fib_semantics.o CC
>>>>> net/ipv4/fib_trie.o CC      net/ipv4/inet_fragment.o CC
>>>>> net/ipv4/ping.o CC      net/ipv4/ip_tunnel_core.o CC
>>>>> net/ipv4/gre_offload.o CC      net/ipv4/sysctl_net_ipv4.o CC
>>>>> net/ipv4/proc.o CC      net/ipv4/xfrm4_mode_beet.o CC
>>>>> net/ipv4/xfrm4_mode_transport.o CC      net/ipv4/xfrm4_mode_tunnel.o 
>>>>> CC      net/ipv4/ipconfig.o CC      net/ipv4/inet_diag.o CC
>>>>> net/ipv4/tcp_diag.o CC      net/ipv4/tcp_cubic.o CC
>>>>> net/ipv4/xfrm4_policy.o CC      net/ipv4/xfrm4_state.o CC
>>>>> net/ipv4/xfrm4_input.o CC      net/ipv4/xfrm4_output.o CC
>>>>> net/ipv4/xfrm4_protocol.o LD      net/ipv4/built-in.o CC
>>>>> net/ipv6/addrconf_core.o CC      net/ipv6/exthdrs_core.o CC
>>>>> net/ipv6/ip6_checksum.o CC      net/ipv6/ip6_icmp.o CC
>>>>> net/ipv6/output_core.o CC      net/ipv6/protocol.o CC
>>>>> net/ipv6/ip6_offload.o CC      net/ipv6/tcpv6_offload.o CC
>>>>> net/ipv6/exthdrs_offload.o LD      net/ipv6/built-in.o CC
>>>>> net/netlink/af_netlink.o CC      net/netlink/genetlink.o LD
>>>>> net/netlink/built-in.o CC      net/packet/af_packet.o LD
>>>>> net/packet/built-in.o CC      net/sched/sch_generic.o CC
>>>>> net/sched/sch_mq.o LD      net/sched/built-in.o CC
>>>>> net/unix/af_unix.o CC      net/unix/garbage.o CC
>>>>> net/unix/sysctl_net_unix.o LD      net/unix/unix.o LD
>>>>> net/unix/built-in.o CC      net/xfrm/xfrm_policy.o CC
>>>>> net/xfrm/xfrm_state.o CC      net/xfrm/xfrm_hash.o CC
>>>>> net/xfrm/xfrm_input.o CC      net/xfrm/xfrm_output.o CC
>>>>> net/xfrm/xfrm_sysctl.o CC      net/xfrm/xfrm_replay.o LD
>>>>> net/xfrm/built-in.o CC      net/sysctl_net.o LD      net/built-in.o 
>>>>> CC      lib/lockref.o CC      lib/bcd.o CC      lib/div64.o CC
>>>>> lib/sort.o CC      lib/parser.o CC      lib/halfmd4.o CC
>>>>> lib/debug_locks.o CC      lib/random32.o CC
>>>>> lib/bust_spinlocks.o CC      lib/kasprintf.o CC      lib/bitmap.o CC
>>>>> lib/scatterlist.o CC      lib/gcd.o CC      lib/lcm.o CC
>>>>> lib/list_sort.o CC      lib/uuid.o CC      lib/flex_array.o CC
>>>>> lib/iov_iter.o CC      lib/clz_ctz.o CC      lib/bsearch.o CC
>>>>> lib/find_bit.o CC      lib/llist.o CC      lib/memweight.o CC
>>>>> lib/kfifo.o CC      lib/percpu-refcount.o CC      lib/percpu_ida.o CC
>>>>> lib/rhashtable.o CC      lib/reciprocal_div.o CC      lib/once.o CC
>>>>> lib/string_helpers.o CC      lib/hexdump.o CC      lib/kstrtox.o CC
>>>>> lib/pci_iomap.o CC      lib/iomap_copy.o CC      lib/devres.o CC
>>>>> lib/hweight.o CC      lib/bitrev.o CC      lib/crc16.o HOSTCC
>>>>> lib/gen_crc32table GEN     lib/crc32table.h CC      lib/crc32.o CC
>>>>> lib/genalloc.o CC      lib/fonts/fonts.o CC
>>>>> lib/fonts/font_8x8.o CC      lib/fonts/font_8x16.o LD
>>>>> lib/fonts/font.o LD      lib/fonts/built-in.o CC
>>>>> lib/lz4/lz4_decompress.o LD      lib/lz4/built-in.o CC
>>>>> lib/lzo/lzo1x_decompress_safe.o LD      lib/lzo/lzo_decompress.o LD
>>>>> lib/lzo/built-in.o CC      lib/xz/xz_dec_syms.o CC
>>>>> lib/xz/xz_dec_stream.o CC      lib/xz/xz_dec_lzma2.o CC
>>>>> lib/xz/xz_dec_bcj.o LD      lib/xz/xz_dec.o LD
>>>>> lib/xz/built-in.o CC      lib/zlib_inflate/inffast.o CC
>>>>> lib/zlib_inflate/inflate.o CC      lib/zlib_inflate/infutil.o CC
>>>>> lib/zlib_inflate/inftrees.o CC      lib/zlib_inflate/inflate_syms.o 
>>>>> LD      lib/zlib_inflate/zlib_inflate.o LD
>>>>> lib/zlib_inflate/built-in.o CC      lib/swiotlb.o CC
>>>>> lib/iommu-helper.o CC      lib/iommu-common.o CC      lib/syscall.o 
>>>>> CC      lib/nlattr.o CC      lib/dynamic_queue_limits.o CC
>>>>> lib/net_utils.o LD      lib/built-in.o CC      lib/argv_split.o CC
>>>>> lib/bug.o CC      lib/cmdline.o CC      lib/ctype.o CC
>>>>> lib/dec_and_lock.o CC      lib/decompress.o CC
>>>>> lib/decompress_bunzip2.o CC      lib/decompress_inflate.o CC
>>>>> lib/decompress_unlz4.o CC      lib/decompress_unlzma.o CC
>>>>> lib/decompress_unlzo.o CC      lib/decompress_unxz.o CC
>>>>> lib/dma-noop.o CC      lib/dump_stack.o CC      lib/earlycpio.o CC
>>>>> lib/extable.o CC      lib/fdt.o CC      lib/fdt_empty_tree.o CC
>>>>> lib/fdt_ro.o CC      lib/fdt_rw.o CC      lib/fdt_strerror.o CC
>>>>> lib/fdt_sw.o CC      lib/fdt_wip.o CC      lib/flex_proportions.o CC
>>>>> lib/idr.o CC      lib/int_sqrt.o CC      lib/ioremap.o CC
>>>>> lib/irq_regs.o CC      lib/is_single_threaded.o CC      lib/klist.o 
>>>>> CC      lib/kobject.o CC      lib/kobject_uevent.o CC      lib/md5.o 
>>>>> CC      lib/nmi_backtrace.o CC      lib/nodemask.o CC
>>>>> lib/plist.o CC      lib/radix-tree.o CC      lib/ratelimit.o CC
>>>>> lib/rbtree.o CC      lib/seq_buf.o CC      lib/sha1.o CC
>>>>> lib/show_mem.o CC      lib/string.o CC      lib/timerqueue.o CC
>>>>> lib/vsprintf.o AR      lib/lib.a CC
>>>>> arch/l4/lib/arch-arm/../proc.o CC
>>>>> arch/l4/lib/arch-arm/../debugfs.o LD
>>>>> arch/l4/lib/arch-arm/built-in.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/ashldi3.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/ashrdi3.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/backtrace.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/bswapsdi2.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/call_with_stack.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/changebit.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/clearbit.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/copy_page.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/csumipv6.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/csumpartial.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/csumpartialcopy.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/delay-loop.o CC
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/delay.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/div64.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/findbit.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/io-readsb.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/io-readsl.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/io-readsw-armv4.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/io-writesb.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/io-writesl.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/io-writesw-armv4.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/lib1funcs.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/lshrdi3.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/memchr.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/memcpy.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/memmove.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/memset.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/memzero.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/muldi3.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/setbit.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/strchr.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/strrchr.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/testchangebit.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/testclearbit.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/testsetbit.o AS
>>>>> arch/l4/lib/arch-arm/../../../arm/lib/ucmpdi2.o CC
>>>>> arch/l4/lib/arch-arm/../csumpartialcopyuser.o CC
>>>>> arch/l4/lib/arch-arm/../memcpy_user.o CC
>>>>> arch/l4/lib/arch-arm/../pte.o CC
>>>>> arch/l4/lib/arch-arm/../uaccess.o AR      arch/l4/lib/arch-arm/lib.a 
>>>>> LD      arch/l4/l4lxlib/generic/built-in.o CC
>>>>> arch/l4/l4lxlib/generic/irq_gen.o CC
>>>>> arch/l4/l4lxlib/generic/legacy.o CC
>>>>> arch/l4/l4lxlib/generic/thread_gen.o AR
>>>>> arch/l4/l4lxlib/generic/lib.a LD
>>>>> arch/l4/l4lxlib/l4env/built-in.o CC
>>>>> arch/l4/l4lxlib/l4env/irq_vcpu.o CC
>>>>> arch/l4/l4lxlib/l4env/memory.o CC      arch/l4/l4lxlib/l4env/misc.o 
>>>>> CC      arch/l4/l4lxlib/l4env/task.o CC
>>>>> arch/l4/l4lxlib/l4env/thread.o AR      arch/l4/l4lxlib/l4env/lib.a LD
>>>>> virt/lib/built-in.o LD      virt/built-in.o LINK    vmlinux LD
>>>>> vmlinux.o MODPOST vmlinux.o GEN     .version CHK
>>>>> include/generated/compile.h UPD     include/generated/compile.h CC
>>>>> init/version.o LD      init/built-in.o drivers/built-in.o: In
>>>>> function `sdhci_at91_probe': 
>>>>> /home/daniel/Desktop/l4re-snapshot/src/l4linux/build-arm/../drivers/mmc/host/sdhci-of-at91.c:212:
>>>>> undefined reference to `clk_set_rate' make[1]: *** [vmlinux] Error 1 
>>>>> make[1]: Leaving directory
>>>>> `/home/daniel/Desktop/l4re-snapshot/src/l4linux/build-arm' make: ***
>>>>> [sub-make] Error 2
>>>>>
>>>>>
>>>>> _______________________________________________ l4-hackers mailing
>>>>> list l4-hackers at os.inf.tu-dresden.de
>>>>> <mailto:l4-hackers at os.inf.tu-dresden.de> <mailto:l4-hackers at os.inf.tu-dresden.de> 
>>>>> http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers <http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers>
>>
>>> _______________________________________________
>>> l4-hackers mailing list
>>> l4-hackers at os.inf.tu-dresden.de <mailto:l4-hackers at os.inf.tu-dresden.de>
>>> http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers
>>
>>
>> Adam
>> -- 
>> Adam                 adam at os.inf.tu-dresden.de
>> <mailto:adam at os.inf.tu-dresden.de>
>>  Lackorzynski         http://os.inf.tu-dresden.de/~adam/
>>
>> _______________________________________________
>> l4-hackers mailing list
>> l4-hackers at os.inf.tu-dresden.de <mailto:l4-hackers at os.inf.tu-dresden.de>
>> http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers
> 
> 
> 
> _______________________________________________
> l4-hackers mailing list
> l4-hackers at os.inf.tu-dresden.de
> http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers
> 


-- 
Matthias Lange, matthias.lange at kernkonzept.com, +49-351-41 888 614

Kernkonzept GmbH.  Sitz: Dresden.  Amtsgericht Dresden, HRB 31129.
Geschäftsführer: Dr.-Ing. Michael Hohmuth





More information about the l4-hackers mailing list