Add network device to L4Linux
Yiyang Su
suyiyang at hotmail.com
Thu Sep 21 17:07:45 CEST 2017
Hi Matthias,
I have tried another approach that to set up the network device on vexpress-a15 that simulated by Qemu.
But the boot process stops at the same point as on Cubietruck. If I delete the l4x_dtb=rom/vexpress_a15.dtb
from the cmdline, then it can boot the L4Linux. I attached the boot log.
Regards,
Yang
The boot log:
L4 Bootstrapper
Build: #9 Do 21. Sep 13:49:59 CEST 2017, 5.4.1 20170404
Scanning up to 256 MB RAM, starting at offset 32MB
Memory size is 256MB (80000000 - 8fffffff)
RAM: 0000000080000000 - 000000008fffffff: 262144kB
Total RAM: 256MB
Scanning fiasco
Scanning sigma0
Scanning moe
Moving up to 13 modules behind 81100000
moving module 02 { 81a33000-81a644ab } -> { 81b23000-81b544ab } [201900]
moving module 01 { 81a21000-81a3233f } -> { 81b11000-81b2233f } [70464]
moving module 00 { 8199a000-81a20d5b } -> { 81a8a000-81b10d5b } [552284]
moving module 12 { 8169a000-81999fff } -> { 8178a000-81a89fff } [3145728]
moving module 11 { 81278000-81699487 } -> { 81368000-81789487 } [4330632]
moving module 10 { 81277000-81277086 } -> { 81367000-81367086 } [135]
moving module 09 { 81276000-81276445 } -> { 81366000-81366445 } [1094]
moving module 08 { 81275000-81275420 } -> { 81365000-81365420 } [1057]
moving module 07 { 81271000-8127444b } -> { 81361000-8136444b } [13388]
moving module 06 { 8123f000-812708b3 } -> { 8132f000-813608b3 } [202932]
moving module 05 { 81094000-8123e8e7 } -> { 81184000-8132e8e7 } [1747176]
moving module 04 { 81032000-810936b3 } -> { 81122000-811836b3 } [399028]
moving module 03 { 81010000-8103146f } -> { 81100000-8112146f } [136304]
Loading fiasco
Loading sigma0
Loading moe
find kernel info page...
found kernel info page (via ELF) at 80002000
Regions of list 'regions'
[ 80000000, 800001db] { 1dc} Root mbi_rt
[ 80001000, 80001a7f] { a80} Kern fiasco
[ 80002000, 80096fff] { 95000} Kern fiasco
[ 800c0000, 800ca3e7] { a3e8} Sigma0 sigma0
[ 800d0000, 800d6177] { 6178} Sigma0 sigma0
[ 80140000, 8016eb7b] { 2eb7c} Root moe
[ 80170000, 8017661b] { 661c} Root moe
[ 81000000, 8100f5df] { f5e0} Boot bootstrap
[ 81100000, 81a89fff] { 98a000} Root Module
found kernel options (via ELF) at 80003000
API Version: (87) experimental
Sigma0 config ip:800c0100 sp:00000000
Roottask config ip:80140210 sp:00000000
Starting kernel fiasco at 800011b8
Realview System ID: Rev=1 HBI=190 Build=f Arch=5 FPGA=00
Hello from Startup::stage2
Number of IRQs available at this GIC: 160
FPU: Initialize
FPU0: Subarch: 4, Part: 30, Rev: 0, Var: f, Impl: 41
ARM generic timer: freq=62500000 interval=62500 cnt=5156008
SERIAL ESC: allocated IRQ 37 for serial uart
Not using serial hack in slow timer handler.
Welcome to L4/Fiasco.OC!
L4/Fiasco.OC microkernel on arm
Rev: unknown compiled with gcc 5.4.1 20170404 for Realview []
Build: #1 Thu Sep 21 11:11:54 CEST 2017
Calibrating timer loop... done.
MDB: use page size: 20
MDB: use page size: 12
SIGMA0: Hello!
KIP @ 80002000
allocated 4KB for maintenance structures
SIGMA0: Dump of all resource maps
RAM:------------------------
[4:80000000;80000fff]
[0:80097000;800bffff]
[0:800cb000;800cffff]
[0:800d7000;8013ffff]
[4:80140000;8016efff]
[0:8016f000;8016ffff]
[4:80170000;80176fff]
[0:80177000;810fffff]
[4:81100000;81a89fff]
[0:81a8a000;8effffff]
IOMEM:----------------------
[0:0;7fffffff]
[0:90000000;ffffffff]
mmap() called: unimplemented!
MOE: Hello world
MOE: found 235100 KByte free memory
MOE: found RAM from 80000000 to 8f000000
MOE: allocated 240 KByte for the page array @0x800d7000
MOE: virtual user address space [0-bfffffff]
MOE: rom name space cap -> [C:103000]
BOOTFS: [81100000-81121470] [C:105000] l4re
BOOTFS: [81122000-811836b4] [C:107000] ned
BOOTFS: [81184000-8132e8e8] [C:109000] io
BOOTFS: [8132f000-813608b4] [C:10b000] cons
BOOTFS: [81361000-8136444c] [C:10d000] vexpress_a15.dtb
BOOTFS: [81365000-81365421] [C:10f000] l4lx-net-vex.cfg
BOOTFS: [81366000-81366446] [C:111000] l4lx-net-vex.devs
BOOTFS: [81367000-81367087] [C:113000] l4lx-net-vex.io
BOOTFS: [81368000-81789488] [C:115000] vmlinuz
BOOTFS: [8178a000-81a8a000] [C:117000] ramdisk-arm.rd
MOE: cmdline: moe rom/l4lx-net-vex.cfg
MOE: Starting: rom/ned rom/l4lx-net-vex.cfg
MOE: loading 'rom/ned'
Ned says: Hi World!
Ned: loading file: 'rom/l4lx-net-vex.cfg'
Console Server
cons>
Created vcon channel: IO [41f010]
cons>
IO | Io service
IO | Verboseness level: 4
IO | unused physical memory space:
IO | [00000000000000-0000007fffffff]
IO | [00000090000000-000000ffffffff]
IO | no 'iommu' capability found use CPU-phys for DMA
IO | Loading: config 'rom/l4lx-net-vex.devs'
IO | Loading: config 'rom/l4lx-net-vex.io'
IO | Real Hardware -----------------------------------
IO | System Bus: hid=
IO | Resources: ==== start ====
IO | DMADOM [00000000000000-00000000000000 1] non-pref (32bit) (align=0 flags=6)
IO | Resources: ===== end =====
IO | clcd: hid=AMBA PL110
IO | Resources: ==== start ====
IO | IOMEM [00000010020000-00000010020fff 1000] non-pref (32bit) (align=fff flags=2)
IO | Resources: ===== end =====
IO | CTRL: hid=System Control
IO | Resources: ==== start ====
IO | IOMEM [00000010000000-00000010000fff 1000] non-pref (32bit) (align=fff flags=2)
IO | Resources: ===== end =====
IO | kmi0: hid=
IO | Resources: ==== start ====
IO | IRQ [0000000000002c-0000000000002c 1] none (32bit) (align=0 flags=1)
IO | IOMEM [00000010006000-00000010006fff 1000] non-pref (32bit) (align=fff flags=2)
IO | Resources: ===== end =====
IO | virtio_mmio3: hid=
IO | Resources: ==== start ====
IO | IRQ [0000000000004b-0000000000004b 1] none (32bit) (align=0 flags=1)
IO | IOMEM [00000010013600-000000100137ff 200] non-pref (32bit) (align=1ff flags=2)
IO | Resources: ===== end =====
IO | NIC: hid=smc91x
IO | Clients: ===== start ====
IO | NIC: [N2Vi9Proxy_devE]
IO | Clients: ===== end ====
IO | Resources: ==== start ====
IO | IRQ [0000000000003c-0000000000003c 1] none (32bit) (align=0 flags=1)
IO | IOMEM [00000010030000-00000010030fff 1000] non-pref (32bit) (align=fff flags=2)
IO | Resources: ===== end =====
IO | kmi1: hid=
IO | Resources: ==== start ====
IO | IRQ [0000000000002d-0000000000002d 1] none (32bit) (align=0 flags=1)
IO | IOMEM [00000010007000-00000010007fff 1000] non-pref (32bit) (align=fff flags=2)
IO | Resources: ===== end =====
IO | warning: could not register control interface at cap 'platform_ctl'
IO | Ready. Waiting for request.
PH 0 offs=00010000 flags=rwx PH-type=0x1
virt=02000000 evirt=0247b5bc
phys=02000000 ephys=0247b5bc
f_sz=003f24df memsz=0047b5bc
PH 1 offs=003b1cf8 flags=r-x PH-type=0x4
virt=023a1cf8 evirt=023a1d1c
phys=023a1cf8 ephys=023a1d1c
f_sz=00000024 memsz=00000024
PH 2 offs=00000000 flags=rwx PH-type=0x6474e551
virt=00000000 evirt=00000000
phys=00000000 ephys=00000000
f_sz=00000000 memsz=00000000
Starting binary at 0x2000330, argc=10 argv=0xafff4f7c *argv=0xb1007ff4 argv0=rom/vmlinuz
External resolver is at 0xa80007f0
======> L4Linux starting... <========
Linux version 4.7.0-l4 (yiyang at i85217) (gcc version 5.4.1 20170404 (Linaro GCC 5.4-2017.05) ) #2 Thu Sep 21 13:29:53 CEST 2017
Binary name: rom/vmlinuz
This is an AEABI build.
Linux kernel command line (9 args): mem=64M console=ttyLv0 earlyprintk=1 l4x_rd=rom/ramdisk-arm.rd root=1:0 rw ramdisk_size=4000 l4x_dtb=rom/vexpress_a15.dtb l4shmnet.add=shmns,macpart=1
CPU mapping (l:p)[1]: 0:0
Image: 02000000 - 02600000 [6144 KiB].
Areas: Text: 02000000 - 023a1d1c [3719kB]
RO-Data: 022c0000 - 0238d000 [820kB]
Data: 023ca000 - 023ed200 [140kB]
Init: 023a2000 - 023ca000 [160kB]
BSS: 023f24df - 0247b5bc [548kB]
Device scan:
Device: L4ICU
Device: NIC
IRQ: 0000003c - 0000003c
MEM: 10030000 - 10030fff
Device scan done.
IO | vbus l4linux does not support a global DMA domain
error: could not assign DMA space to vBUS: -2
DMA will not work!
l4lx_thread_create: Created thread 41d (cpu0) (u:b3000e00, v:b3000c00, sp:023cbfa4)
main thread will be 41d
L4x: section-with-init(-data): Virt: 0x2000000 to 0x247bfff [4592 KiB]
L4x: section-with-init-text: Virt: 0x2000000 to 0x247bfff [4592 KiB]
L4x: Main thread running, waiting...
L4x: Memory size: 64MB
L4x: Setting superpages for main memory
L4x: Adjusted memory start: 02000000
L4x: Main memory: Virt: 0x2600000 to 0x65fffff [65536 KiB]
l4x: vmalloc area: 06600000 - 0e600000
L4x: text: Virt: 0x2000000 to 0x247bfff [4592 KiB]
________________________________
From: Matthias Lange <matthias.lange at kernkonzept.com>
Sent: 15 September 2017 08:08
To: l4-hackers at os.inf.tu-dresden.de
Cc: Yiyang Su
Subject: Re: Add network device to L4Linux
Hi Yang,
I have to admit that I don't know what's going wrong yet. Your
configuration looks reasonable. I need a little bit more time to
reproduce your issue and to analyze the problem.
Regards,
Matthias.
On 09/13/2017 01:56 PM, Yiyang Su wrote:
> Hi,
>
>
> Starting from a previous work [1], I have succeeded in booting L4Linux on
>
> Cubietruck with the snapshot (l4re-snapshot-2016082114). Then I have
>
> been trying to configure L4Linux to access Ethernet device. With current
>
> configuration I cannot boot L4Llinux anymore. Following is my configuration
>
> and boot log:
>
>
> l4lx-net-cubi.devs
>
> ===========================================
>
> local Res = Io.Res
> local Hw = Io.Hw
>
> Io.hw_add_devices(function()
> NIC = Hw.Device(function()
> Property.hid = "sun7ia20gmac";
> compatible = {"allwinner,sun7i-a20-gmac"};
> Resource.regs = Res.mmio(0x01c50000, 0x01c5ffff);
> --Resource.irq = Res.irq(0);
> Resource.irq = Res.irq(85);
> --Resource.irq = Res.irq(4);
> Property.flags = Io.Hw_device_DF_dma_supported;
> end);
> end)
>
>
>
> l4lx-net-cubi.io
>
> ===========================================
>
> local hw = Io.system_bus()
>
> Io.add_vbus("l4linux", Io.Vi.System_bus
> {
> NIC = wrap(hw:match("allwinner,sun7i-a20-gmac"));
> })
>
>
> l4lx-net-cubi.cfg
>
> ===========================================
>
> local L4 = require("L4");
>
> local loader = L4.default_loader;
>
> vbus_l4linux = loader:new_channel();
>
> loader:start(
> {
> caps = {
> icu = L4.Env.icu,
> sigma0 = L4.cast(L4.Proto.Factory,
> L4.Env.sigma0):create(L4.Proto.Sigma0),
> l4linux = vbus_l4linux:svr(),
> },
> log = {"IO", "y"},
> l4re_dbg = L4.Dbg.Warn,
> },
> "rom/io -vvv rom/l4lx-net-cubi.devs rom/l4lx-net-cubi.io"
> );
>
> -- start L4Linux
> loader:start(
> {
> caps = {
> vbus = vbus_l4linux,
> },
> --log = {"l4linux", "cyan"},
> log = L4.Env.log:m("rws"),
> l4re_dbg = L4.Dbg.Warn,
> },
> "rom/vmlinuz mem=64M console=ttyLv0 earlyprintk=1
> l4x_dtb=rom/sun7i-a20-cubietruck.dtb "
> .. "l4x_rd=rom/ramdisk-" .. L4.Info.arch() .. ".rd "
> .. "root=1:0 rw ramdisk_size=4000"
> );
>
>
> modules.list
> ============================================
> entry L4Linux-net-cubi
> roottask moe rom/l4lx-net-cubi.cfg
> module l4re
> module ned
> module io
> module sun7i-a20-cubietruck.dtb
> module l4lx-net-cubi.cfg
> module l4lx-net-cubi.devs
> module l4lx-net-cubi.io
> module vmlinuz
> module[perl] "ramdisk-$ENV{ARCH}.rd"
>
>
> boot log
> ===================================
> U-Boot SPL 2017.03-rc3 (Aug 14 2017 - 13:26:17)
> DRAM: 2048 MiB
> CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
> Trying to boot from MMC1
>
>
> U-Boot 2017.03-rc3 (Aug 14 2017 - 13:26:17 +0200) Allwinner Technology
>
> CPU: Allwinner A20 (SUN7I)
> Model: Cubietech Cubietruck
> I2C: ready
> DRAM: 2 GiB
> MMC: SUNXI SD/MMC: 0
> *** Warning - bad CRC, using default environment
>
> Setting up a 1024x768 vga console (overscan 0x0)
> In: serial
> Out: vga
> Err: vga
> SCSI: SATA link 0 timeout.
> AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
> flags: ncq stag pm led clo only pmp pio slum part ccc apst
> Net: eth0: ethernet at 01c50000
> starting USB...
> USB0: USB EHCI 1.00
> USB1: USB OHCI 1.0
> USB2: USB EHCI 1.00
> USB3: USB OHCI 1.0
> scanning bus 0 for devices... 1 USB Device(s) found
> scanning bus 2 for devices... 1 USB Device(s) found
> scanning usb for storage devices... 0 Storage Device(s) found
> Hit any key to stop autoboot: 0
> switch to partitions #0, OK
> mmc0 is current device
> Scanning mmc 0:1...
> Found U-Boot script /boot/boot.scr
> reading /boot/boot.scr
> 1165 bytes read in 24 ms (46.9 KiB/s)
> ## Executing script at 43100000
> Failed to mount ext2 filesystem...
> ** Unrecognized filesystem type **
> reading boot/uImage
> 10481728 bytes read in 652 ms (15.3 MiB/s)
> ## Booting kernel from Legacy Image at 48000000 ...
> Image Name: L4 Image #32
> Image Type: ARM Linux Kernel Image (uncompressed)
> Data Size: 10481664 Bytes = 10 MiB
> Load Address: 41000000
> Entry Point: 41000000
> Verifying Checksum ... OK
> Loading Kernel Image ... OK
>
> Starting kernel ...
>
>
> L4 Bootstrapper
> Build: #32 Mi 13. Sep 11:47:18 CEST 2017, 4.9.4
> Scanning up to 1024 MB RAM, starting at offset 32MB
> Memory size is 1024MB (40000000 - 7fffffff)
> RAM: 0000000040000000 - 000000007fffffff: 1048576kB
> Total RAM: 1024MB
> Scanning fiasco
> Scanning sigma0
> Scanning moe
> Moving up to 12 modules behind 41100000
> moving module 02 { 419cd000-419fe49b } -> { 41abd000-41aee49b } [201884]
> moving module 01 { 419bb000-419cc337 } -> { 41aab000-41abc337 } [70456]
> moving module 00 { 4192d000-419ba98b } -> { 41a1d000-41aaa98b } [579980]
> moving module 11 { 4162d000-4192cfff } -> { 4171d000-41a1cfff } [3145728]
> moving module 10 { 4122b000-4162c473 } -> { 4131b000-4171c473 } [4199540]
> moving module 09 { 4122a000-4122a0c2 } -> { 4131a000-4131a0c2 } [195]
> moving module 08 { 41229000-412291ef } -> { 41319000-413191ef } [496]
> moving module 07 { 41228000-4122835d } -> { 41318000-4131835d } [862]
> moving module 06 { 4121f000-41227d73 } -> { 4130f000-41317d73 } [36212]
> moving module 05 { 41094000-4121e8d3 } -> { 41184000-4130e8d3 } [1616084]
> moving module 04 { 41032000-410936a7 } -> { 41122000-411836a7 } [399016]
> moving module 03 { 41010000-4103145f } -> { 41100000-4112145f } [136288]
> Loading fiasco
> Loading sigma0
> Loading moe
> find kernel info page...
> found kernel info page (via ELF) at 40002000
> Regions of list 'regions'
> [ 40000000, 400001cf] { 1d0} Root mbi_rt
> [ 40001000, 40001a7f] { a80} Kern fiasco
> [ 40002000, 4009afff] { 99000} Kern fiasco
> [ 400c0000, 400ca287] { a288} Sigma0 sigma0
> [ 400d0000, 400d6177] { 6178} Sigma0 sigma0
> [ 40140000, 40168fcb] { 28fcc} Root moe
> [ 40170000, 40176ff3] { 6ff4} Root moe
> [ 41000000, 4100f5cb] { f5cc} Boot bootstrap
> [ 41100000, 41a1cfff] { 91d000} Root Module
> found kernel options (via ELF) at 40003000
> API Version: (87) experimental
> Sigma0 config ip:400c0100 sp:00000000
> Roottask config ip:40140210 sp:00000000
> Starting kernel fiasco at 4000124c
> Non-HYP kernel detected but running in HYP mode, switching back.
> Hello from Startup::stage2
> Number of IRQs available at this GIC: 160
> FPU: Initialize
> FPU0: Subarch: 2, Part: 30, Rev: 4, Var: 7, Impl: 41
> ARM generic timer: freq=24000000 interval=24000 cnt=212673046
> SERIAL ESC: allocated IRQ 33 for serial uart
> Not using serial hack in slow timer handler.
> Welcome to L4/Fiasco.OC!
> L4/Fiasco.OC microkernel on arm
> Rev: unknown compiled with gcc 4.9.4 for Allwinner A20 []
> Build: #4 Mon Sep 11 10:25:38 CEST 2017
>
> Calibrating timer loop... done.
> MDB: use page size: 20
> MDB: use page size: 12
> SIGMA0: Hello!
> KIP @ 40002000
> allocated 4KB for maintenance structures
> SIGMA0: Dump of all resource maps
> RAM:------------------------
> [4:40000000;40000fff]
> [0:4009b000;400bffff]
> [0:400cb000;400cffff]
> [0:400d7000;4013ffff]
> [4:40140000;40168fff]
> [0:40169000;4016ffff]
> [4:40170000;40176fff]
> [0:40177000;410fffff]
> [4:41100000;41a1cfff]
> [0:41a1d000;7effffff]
> IOMEM:----------------------
> [0:0;3fffffff]
> [0:80000000;ffffffff]
> MOE: Hello world
> MOE: found 1021976 KByte free memory
> MOE: found RAM from 40000000 to 7f000000
> MOE: allocated 1008 KByte for the page array @0x40177000
> MOE: virtual user address space [0-bfffffff]
> MOE: rom name space cap -> [C:103000]
> BOOTFS: [41100000-41121460] [C:105000] l4re
> BOOTFS: [41122000-411836a8] [C:107000] ned
> BOOTFS: [41184000-4130e8d4] [C:109000] io
> BOOTFS: [4130f000-41317d74] [C:10b000] sun7i-a20-cubietruck.dtb
> BOOTFS: [41318000-4131835e] [C:10d000] l4lx-net-cubi.cfg
> BOOTFS: [41319000-413191f0] [C:10f000] l4lx-net-cubi.devs
> BOOTFS: [4131a000-4131a0c3] [C:111000] l4lx-net-cubi.io
> BOOTFS: [4131b000-4171c474] [C:113000] vmlinuz
> BOOTFS: [4171d000-41a1d000] [C:115000] ramdisk-arm.rd
> MOE: cmdline: moe rom/l4lx-net-cubi.cfg
> MOE: Starting: rom/ned rom/l4lx-net-cubi.cfg
> MOE: loading 'rom/ned'
> Ned says: Hi World!
> Ned: loading file: 'rom/l4lx-net-cubi.cfg'
> IO | Io service
> IO | Verboseness level: 4
> IO | unused physical memory space:
> IO | [00000000000000-0000003fffffff]
> IO | [00000080000000-000000ffffffff]
> IO | no 'iommu' capability found use CPU-phys for DMA
> IO | Loading: config 'rom/l4lx-net-cubi.devs'
> IO | warning: inconsistent fixed resource @ device: /System Bus/
> IO | : hid=sun7ia20gmac
> IO | DMADOM [00000000000000-00000000000000 1] non-pref (32bit)
> (align=0 flags=6)
> IO | Loading: config 'rom/l4lx-net-cubi.io'
> IO | Real Hardware -----------------------------------
> IO | System Bus: hid=
> IO | Resources: ==== start ====
> IO | DMADOM [00000000000000-00000000000000 1] non-pref (32bit)
> (align=0 flags=6)
> IO | Resources: ===== end =====
> IO | NIC: hid=sun7ia20gmac
> IO | Clients: ===== start ====
> IO | NIC: [N2Vi9Proxy_devE]
> IO | Clients: ===== end ====
> IO | Resources: ==== start ====
> IO | IRQ [00000000000055-00000000000055 1] none (32bit)
> (align=0 flags=1)
> IO | IOMEM [00000001c50000-00000001c5ffff 10000] non-pref
> (32bit) (align=ffff flags=2)
> IO | DMADOM [00000000000000-00000000000000 1] non-pref (32bit)
> (align=0 flags=6)
> IO | Resources: ===== end =====
> IO | warning: could not register control interface at cap
> 'platform_ctl'
> IO | Ready. Waiting for request.
> PH 0 offs=00010000 flags=rwx PH-type=0x1
> virt=02000000 evirt=0245b5dc
> phys=02000000 ephys=0245b5dc
> f_sz=003d3653 memsz=0045b5dc
> PH 1 offs=00394898 flags=r-x PH-type=0x4
> virt=02384898 evirt=023848bc
> phys=02384898 ephys=023848bc
> f_sz=00000024 memsz=00000024
> PH 2 offs=00000000 flags=rwx PH-type=0x6474e551
> virt=00000000 evirt=00000000
> phys=00000000 ephys=00000000
> f_sz=00000000 memsz=00000000
> Starting binary at 0x2000330, argc=9 argv=0xafff4f84 *argv=0xb1007ff4
> argv0=rom/vmlinuz
> External resolver is at 0xa80007cc
> ======> L4Linux starting... <========
> Linux version 4.7.0-l4 (yiyang at i85217) (gcc version 4.9.4 (Linaro GCC
> 4.9-2017.01) ) #4 Wed Sep 13 11:18:30 CEST 2017
> Binary name: rom/vmlinuz
> This is an AEABI build.
> Linux kernel command line (8 args): mem=64M console=ttyLv0 earlyprintk=1
> l4x_dtb=rom/sun7i-a20-cubietruck.dtb l4x_rd=rom/ramdisk-arm.rd root=1:0
> rw ramdisk_size=4000
> CPU mapping (l:p)[1]: 0:0
> Image: 02000000 - 02600000 [6144 KiB].
> Areas: Text: 02000000 - 023848bc [3602kB]
> RO-Data: 022ad000 - 02370000 [780kB]
> Data: 023ac000 - 023cefe0 [139kB]
> Init: 02385000 - 023ac000 [156kB]
> BSS: 023d3653 - 0245b5dc [543kB]
> Device scan:
> Device: L4ICU
> Device: NIC
> IRQ: 00000055 - 00000055
> MEM: 01c50000 - 01c5ffff
> DMAD: 00000000 - 00000000
> Device scan done.
> l4lx_thread_create: Created thread 41e (cpu0) (u:b3000e00, v:b3000c00,
> sp:023adfa4)
> main thread will be 41e
> L4x: section-with-init(-data): Virt: 0x2000000 to 0x245bfff [4464 KiB]
> section-with-init(-data): Phys: 0x40273000 to 0x406cefff, [4464 KiB]
> L4x: section-with-init-text: Virt: 0x2000000 to 0x245bfff [4464 KiB]
> error: failed to get physical address for 2000000.
> L4x: Main thread running, waiting...
> L4x: Memory size: 64MB
> L4x: Setting superpages for main memory
> L4x: Adjusted memory start: 02000000
> L4x: Main memory: Virt: 0x2600000 to 0x65fffff [65536 KiB]
> Main memory: Phys: 0x41c00000 to 0x45bfffff, [65536 KiB]
> l4x: vmalloc area: 06600000 - 0e600000
> L4x: text: Virt: 0x2000000 to 0x245bfff [4464 KiB]
> error: failed to get physical address for 2000000.
>
>
> The boot process stops at this point. Compare with other boot logs in
> archives the following step could
> be the loading ramdisk and device tree blob. Then I delete the
> "l4x_dtb=rom/sun7i-a20-cubietruck.dtb"
> from the cmdline, it can boot the L4Linux again. Does it mean there is a
> problem with loading the device tree blob?
>
> Any suggestion is very appreciated. Thanks.
>
> Best regards,
> Yang
>
>
> [1] http://os.inf.tu-dresden.de/pipermail/l4-hackers/2017/008120.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://os.inf.tu-dresden.de/pipermail/l4-hackers/attachments/20170921/b754b8fa/attachment.html>
More information about the l4-hackers
mailing list