Trying l4re-snapshot-17.10 on a Wanboard(iMX6Q) hangs at Starting kernel ...

[Sathish Kumar Balasubramaniam -ERS, HCL Tech]

Build machine is Debian 8.10 (jessie) 64-Bit
GCC toolchain is gcc-linaro-4.9.4-2017.01-x86_64_arm-linux-gnueabihf
I tried to build the l4re-snapshot-17.10 for Freescale iMX6 and the build completed.
When i loaded the bootstrap.uimage (both hello and L4Linux-basic) boots till the following

U-Boot 2016.11+fslc+gc44711d (Nov 15 2017 - 16:14:11 +0530)

CPU:   Freescale i.MX6Q rev1.2 at 792 MHz
Reset cause: POR
Board: Wandboard rev C1
I2C:   ready
DRAM:  2 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
*** Warning - bad CRC, using default environment

auto-detected panel HDMI
Display: HDMI (1024x768)
In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]
Hit any key to stop autoboot:  0
=> ext4load mmc 0 ${loadaddr} /boot/bootstrap.uimage
8790080 bytes read in 628 ms (13.3 MiB/s)
=> bootm ${loadaddr}
## Booting kernel from Legacy Image at 12000000 ...
   Image Name:   L4 Image #2
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    8790016 Bytes = 8.4 MiB
   Load Address: 11000000
   Entry Point:  11000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK

Starting kernel ...



I have a JTAG BDI-3000 with Cortex-A9 license.
Any ideas how to debug the issue ???
::DISCLAIMER:: ---------------------------------------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. ----------------------------------------------------------------------------------------------------------------------------------------------------
::DISCLAIMER:: ---------------------------------------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. ----------------------------------------------------------------------------------------------------------------------------------------------------