Thanks Christian,
it works after i removed the l4/pkg/usbhid. recompiled the l4/pkg/usb and replaced them. it works perfectly on DOpE
but errors come out when i tried to load the l4linux26 inside
the usbcore disconnect the usb mouse when loading the l4linux. is it that i had did the wrong setup when compiling the l4linux?
Welcome to Fiasco(ia32)! DD-L4(v2)/ia32 microkernel (C) 1998-2009 TU Dresden Rev: r438 compiled with gcc 4.3.2 for Intel Pentium [] Performance-critical config option(s) detected: CONFIG_NDEBUG is off CONFIG_NO_FRAME_PTR is off
Enabling special fully nested mode for PIC Using the PIT (i8254) on IRQ 0 for scheduling SERIAL ESC: allocated IRQ 4 for serial uart SERIAL ESC: allocated IRQ 4 for serial uart Not using serial hack in slow timer handler. Absolute KIP Syscalls using: Sysenter CPU: GenuineIntel (6:3:3:0) Model: Pentium II (Klamath) at 1796 MHz
32 KB L1 I Cache (8-way associative, 64 bytes per line) 32 KB L1 D Cache (8-way associative, 64 bytes per line) 2048 KB L2 U Cache (8-way associative, 64 bytes per line)
Freeing init code/data: 24576 bytes (6 pages)
Calibrating timer loop... done. SIGMA0: Hello! KIP @ 1000 Found Fiasco: KIP syscalls: yes allocated 4KB for maintenance structures
Roottask. Command line found: "(cd)/boot/l4/l4env/roottask task modname "loader" allow_cli task modname "bmodfs" attached 5 modules"
261695kB ( 255MB) total RAM (reported by bootloader) 234336kB ( 229MB) received RAM from Sigma0 34636kB ( 34MB) reserved RAM for RMGR Received I/O ports 0000-ffff Attached irqs = [ <!0> 1 <!2> 3 <!4> 5 6 7 8 9 A B C D E F 10 11 ]
Roottask: Parsing command line config. configured task 0x00 (loader): vm_offs:0 irq:3ffff lmcp:ffff allow_cli:1 mcp:ff prio:10 small:ff mods:0 configured task 0x00 (bmodfs): vm_offs:0 irq:3ffff lmcp:ffff allow_cli:0 mcp:ff prio:10 small:ff mods:5
Roottask: Loading 17 modules. #05: loading "(cd)/boot/l4/l4env/events" from [0612e000-0616fe99] to [01540000-01549190][0154a000-0155f590] entry at 0005f374 via trampoline page code symbols at [0eb74000-0eb76000] (8kB), lines at [0eb6d000-0eb74000] (28kB) #06: loading "(cd)/boot/l4/l4env/names --events" from [06170000-061b1c12] to [002d0000-002d6a37][002d7000-002e2000] entry at 0006037c via trampoline page code symbols at [0eb6b000-0eb6d000] (8kB), lines at [0eb65000-0eb6b000] (24kB) #07: loading "(cd)/boot/l4/l4env/log" from [061b2000-061efd07] to [00400000-00406eca][00407000-00439808] entry at 00061370 via trampoline page code symbols at [0eb63000-0eb65000] (8kB), lines at [0eb5d000-0eb63000] (24kB) #08: loading "(cd)/boot/l4/l4env/dm_phys --isa=0x00800000" from [061f0000-0628a8b4] to [01500000-01513cb7][01514000-0151e000] entry at 00062384 via trampoline page code symbols at [0eb58000-0eb5d000] (20kB), lines at [0eb4a000-0eb58000] (56kB) #09: loading "(cd)/boot/l4/l4env/simple_ts -t 300" from [0628b000-062d8310] to [01400000-01408dea][01409000-014185e8] entry at 0006337c via trampoline page code symbols at [0eb48000-0eb4a000] (8kB), lines at [0eb40000-0eb48000] (32kB) #0a: loading "(cd)/boot/l4/l4env/rtc" from [062d9000-06308a5c] to [01080000-010845c0][01085000-0108a000] entry at 00064370 via trampoline page code symbols at [0eb3e000-0eb40000] (8kB), lines at [0eb39000-0eb3e000] (20kB) #0b: loading "(cd)/boot/l4/l4env/l4io" from [06309000-0654a391] to [00c20000-00c45315][00c46000-00cb4000] entry at 00066370 via trampoline page code symbols at [0eae3000-0eb39000] (344kB), lines at [0eac9000-0eae3000] (104kB) #0c: loading "(cd)/boot/l4/l4env/l4dope" from [0654b000-066c2384] to [01b00000-01b45ef1][01b46000-01b8b000] entry at 00067374 via trampoline page code symbols at [0eabb000-0eac9000] (56kB), lines at [0ea8d000-0eabb000] (184kB) #0d: loading "(cd)/boot/l4/usb/usbcore" from [066c3000-068faac1] to [008e0000-0092600d][00927000-0094c000] entry at 00068374 via trampoline page code symbols at [0ea81000-0ea8d000] (48kB), lines at [0ea4b000-0ea81000] (216kB) #0e: loading "(cd)/boot/l4/usb/usbhid" from [068fb000-06b0a851] to [00cc0000-00cffecd][00d00000-00d24000] entry at 00069370 via trampoline page code symbols at [0ea40000-0ea4b000] (44kB), lines at [0ea11000-0ea40000] (188kB) #0f: loading "(cd)/boot/l4/l4env/bmodfs" from [06b0b000-06bb2f8d] to [01220000-01238689][01239000-01250000] passing module (cd)/boot/l4/cfg/l4linux26.cfg [ 06bb3000-06bb3165 ] passing module (cd)/boot/l4/l4env/libloader.s.so [ 06bb4000-06c52f11 ] passing module (cd)/boot/l4/l4env/libld-l4.s.so [ 06c53000-06ccc219 ] passing module (cd)/boot/l4/l4linux/vmlinuz [ 06ccd000-07083183 ] passing module (cd)/boot/l4/l4linux/drops.rd [ 07084000-08084000 ] entry at 0006a46c via trampoline page code symbols at [0ea0c000-0ea11000] (20kB), lines at [0e9f9000-0ea0c000] (76kB) #10: loading "(cd)/boot/l4/l4env/loader --fprov=BMODFS l4linux26.cfg" from [08084000-08162b6d] to [01300000-013291c9][0132a000-01349000] entry at 0006b390 via trampoline page code symbols at [0e9f2000-0e9f9000] (28kB), lines at [0e9d8000-0e9f2000] (104kB)
ROOT: Sending ports 0070-0070 to task #0a ROOT: Sending ports 0080-0080 to task #0a ROOT: Sending ports 0071-0071 to task #0a names | Starting thread listening for `exit' events rtc | Date:29.04.2009 Time:09:33:00 simplets| Configured for 300 tasks. bmodfs | Passed the following modules: bmodfs | module "(cd)/boot/l4/cfg/l4linux26.cfg" (1kB) bmodfs | module "(cd)/boot/l4/l4env/libloader.s.so" (636kB) bmodfs | module "(cd)/boot/l4/l4env/libld-l4.s.so" (485kB) bmodfs | module "(cd)/boot/l4/l4linux/vmlinuz" (3801kB) bmodfs | module "(cd)/boot/l4/l4linux/drops.rd" (16384kB) loader | Can't map tbuf status page usbcore | main(): DDE USB CORE initiaizing: usbcore | main(): Initializing DDE base system. loader | sleeping for 1000 ms io | Using platform configuration 'x86' ROOT: Sending ports 0cfb-0cfb to task #0b ROOT: Sending ports 0cf8-0cfb to task #0b ROOT: Sending ports 0cfe-0cff to task #0b io | PCI: Using configuration type 1 io | PCI: Probing PCI hardware io | PCI: Probing PCI hardware (bus 00) ROOT: Sending ports 0cfc-0cff to task #0b usbhid | main(): DDEUSB client side initiaizing: io | PCI: PIIX3: Enabling Passive Release on 00:01.0 io | Limiting direct PCI/PCI transfers. io | Activating ISA DMA hang workarounds. io | 00000000-ffffffff : PCI mem io | f0000000-f1ffffff : Cirrus Logic GD 5446 io | f2000000-f2000fff : Cirrus Logic GD 5446 io | 0000-ffff : PCI IO io | 0cf8-0cff : PCI conf1 io | b000-b03f : Intel Corporation 82371AB/EB/MB PIIX4 ACPI io | b100-b11f : Intel Corporation 82371AB/EB/MB PIIX4 ACPI io | c000-c00f : Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] io | c020-c03f : Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] io | c100-c1ff : Realtek Semiconductor Co., Ltd. RTL-8029(AS) io | Available IRQs=[ <!0> 1 <!2> 3 <!4> 5 6 7 8 9 a b c d e f 10 11 ] usbhid | Softirq daemon starting usbhid | Initializing DDE page cache usbhid | <6>usbcore: registered new interface driver hub usbhid | <6>usbcore: registered new device driver usb usbhid | unimplemented: pci_fixup_device usbhid | unimplemented: pci_fixup_device usbhid | _add_ddekit_device: Detected device: 8086:7000 usbhid | unimplemented: pci_fixup_device usbhid | unimplemented: pci_fixup_device usbhid | _add_ddekit_device: Detected device: 8086:7010 usbhid | unimplemented: pci_fixup_device usbhid | unimplemented: pci_fixup_device usbhid | _add_ddekit_device: Detected device: 8086:7020 usbhid | unimplemented: pci_fixup_device usbhid | unimplemented: pci_fixup_device usbhid | _add_ddekit_device: Detected device: 8086:7113 usbhid | unimplemented: pci_fixup_device usbhid | unimplemented: pci_fixup_device usbhid | _add_ddekit_device: Detected device: 1013:b8 usbhid | unimplemented: pci_fixup_device usbhid | unimplemented: pci_fixup_device usbhid | _add_ddekit_device: Detected device: 10ec:8029 l4dope | L4INPUT native mode activated l4dope | L4INPUT: !!! W A R N I N G !!! usbcore | main(): Initializing DDE kmalloc. usbcore | main(): Initializing DDE process. usbcore | main(): Initializing DDE timers. l4dope | L4INPUT: Please, do not use Fiasco's "-esc" with L4INPUT. l4dope | L4INPUT: !!! W A R N I N G !!! ROOT: Sending ports 0060-006f to task #0b usbcore | main(): Initializing DDE softirq. l4dope | Failed to disable AUX port, but continuing anyway... Is this a SiS? l4dope | If AUX port is really absent please use the 'i8042.noaux' option. l4dope | serio: i8042 KBD port at 0x60,0x64 irq 1 usbcore | Softirq daemon starting usbcore | main(): Doing initcalls... usbcore | Initializing DDE page cache usbhid | <6>/home/user/Desktop/tudos/l4/pkg/usb/lib/libddeusb26/src/ddeusb_vhc usbhid : d.c: driver ddeusb_vhcd, DDEUSB Virtual Host Controller usbhid | usbhid | <6>ddeusb_vhcd ddeusb_vhcd: DDEUSB Virtual Host Controller usbhid | <6>ddeusb_vhcd ddeusb_vhcd: new USB bus registered, assigned bus numb usbhid : er 1 usbhid | going to init root hub usbhid | <6>usb usb1: configuration #1 chosen from 1 choice usbhid | <6>hub 1-0:1.0: USB hub found usbhid | <6>hub 1-0:1.0: 13 ports detected usbcore | <6>usbcore: registered new interface driver hub usbcore | <6>usbcore: registered new device driver usb usbcore | unimplemented: pci_fixup_device usbcore | unimplemented: pci_fixup_device usbcore | _add_ddekit_device: Detected device: 8086:7000 usbcore | unimplemented: pci_fixup_device usbcore | unimplemented: pci_fixup_device usbcore | _add_ddekit_device: Detected device: 8086:7010 usbcore | unimplemented: pci_fixup_device usbcore | unimplemented: pci_fixup_device usbcore | _add_ddekit_device: Detected device: 8086:7020 usbcore | unimplemented: pci_fixup_device usbcore | unimplemented: pci_fixup_device usbcore | _add_ddekit_device: Detected device: 8086:7113 usbcore | unimplemented: pci_fixup_device usbcore | unimplemented: pci_fixup_device usbcore | _add_ddekit_device: Detected device: 1013:b8 usbcore | unimplemented: pci_fixup_device usbcore | unimplemented: pci_fixup_device usbcore | _add_ddekit_device: Detected device: 10ec:8029 usbcore | <6>usbcore: registered new interface driver ddeusb usbcore | <7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Dri usbcore : ver (PCI) usbcore | <6>USB Universal Host Controller Interface driver v3.0 ROOT: Sending ports c020-c03f to task #0b io | PCI: Setting latency timer of device 00:01.2 to 64 usbcore | <6>uhci_hcd 0000:00:02.0: UHCI Host Controller usbcore | <6>uhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number usbcore : 1 usbcore | <6>uhci_hcd 0000:00:02.0: irq 9, io base 0x0000c020 usbcore | going to init root hub usbcore | <6>usb usb1: configuration #1 chosen from 1 choice usbcore | <6>hub 1-0:1.0: USB hub found usbcore | <6>hub 1-0:1.0: 2 ports detected l4dope | input: AT Raw Set 2 keyboard on isa0060/serio0 l4dope | input: PC Speaker l4dope | input: L4 input event injector l4dope | L4 input event injector: IRQ handler up l4dope | connect "AT Raw Set 2 keyboard", isa0060/serio0/input0 l4dope | connect "PC Speaker", isa0061/input0 l4dope | connect "L4 input event injector", l4/sys l4dope | SharedMem(alloc): hl.raw=100000, id=68, size=800 l4dope | SharedMem(get_adr): address = 0x5000 l4dope | SharedMem(alloc): hl.raw=100000, id=69, size=800 l4dope | SharedMem(get_adr): address = 0x6000 l4dope | SharedMem(alloc): hl.raw=100000, id=6a, size=800 l4dope | SharedMem(get_adr): address = 0x7000 l4dope | SharedMem(alloc): hl.raw=100000, id=6b, size=800 l4dope | SharedMem(get_adr): address = 0xd000 l4dope | SharedMem(alloc): hl.raw=100000, id=6c, size=800 l4dope | SharedMem(get_adr): address = 0xe000 l4dope | SharedMem(alloc): hl.raw=100000, id=6d, size=800 l4dope | SharedMem(get_adr): address = 0xf000 l4dope | SharedMem(alloc): hl.raw=100000, id=6f, size=800 l4dope | SharedMem(get_adr): address = 0x16000 l4dope | SharedMem(alloc): hl.raw=100000, id=74, size=484 l4dope | SharedMem(get_adr): address = 0x20000 l4dope | dope: paddr=f0000000 size=4096KiB l4dope | Mapped video memory at f0000000 to 00400000+000000 [4096kB] via L4IO l4dope | mapping: vaddr=0x400000 size=4194304(0x400000) offset=0(0x0) l4dope | Frame buffer base: 0x400000 l4dope | Resolution: 1024x768x16 l4dope | Bytes per scanline: 2048 usbhid | going to root:whub poll l4dope | Current video mode is 1024x768 red=11:5 green=5:6 blue=0:5 res=0:0 usbcore | going to root:whub poll usbcore | unimplemented: pci_fixup_device usbcore | unimplemented: pci_fixup_device usbcore | unimplemented: pci_fixup_device usbcore | unimplemented: pci_fixup_device usbcore | unimplemented: pci_fixup_device usbcore | unimplemented: pci_fixup_device usbcore | main(): Registered at names. usbcore | main(): READY. usbhid | libddeusb_server_loop(): d_urbs @ 0x00180004 usbcore | ddeusb_core_ddeusb_setup_control_ds_component(): Attached control dat usbcore : a space (size :d5b88, offset: 4) returned 0 (mapped to 0x001 usbcore : 80004) usbhid | <6>usbcore: registered new interface driver usbhid usbhid | <6>/home/user/Desktop/tudos/l4/pkg/usb/examples/usbhid/src/contrib/dr usbhid : iver/usb/input/hid-core.c: v2.6:USB HID core driver usbhid | unimplemented: pci_fixup_device usbhid | unimplemented: pci_fixup_device usbhid | unimplemented: pci_fixup_device usbhid | unimplemented: pci_fixup_device usbhid | unimplemented: pci_fixup_device usbhid | unimplemented: pci_fixup_device usbhid | main(): found l4i_proxy at c.6 usbcore | <6>usb 1-2: new full speed USB device using uhci_hcd and address 2 usbcore | <6>usb 1-2: configuration #1 chosen from 1 choice loader | vmlinuz: Starting application using libld-l4.s.so loader | vmlinuz,#11: Loading binary loader | vmlinuz,#11: Loading ldso loader | vmlinuz,#11: Starting libld-l4.s.so at 000138e0 via 0000cc40 usbhid | <6>usb 1-1: new full speed USB device using ddeusb_vhcd and address 2 usbhid | <6>usb 1-1: configuration #1 chosen from 1 choice l4lx | ======> L4Linux 2.6 starting... <======== l4lx | Linux version 2.6.28-l4-svn143 (user@debian) (gcc version 4.3.2 (Debi l4lx : an 4.3.2-1.1) ) #2 Fri Mar 6 21:57:21 MYT 2009 l4lx | Binary name: vmlinuz l4lx | Linux kernel command line (5 args): mem=64M load_ramdisk=1 ramdisk_si l4lx : ze=16384 root=/dev/ram l4env_rd=drops.rd l4lx | Image: 00400000 - 007f2000 [4040 KiB]. l4lx | Areas: Text: 00400000 - 006f6000 [3032kB] (a bit longer) l4lx | Data: 006f6000 - 0071d6d4 [157kB] l4lx | Initdata: 00720000 - 00761000 [260kB] l4lx | BSS: 00762000 - 007f1030 [572kB] l4lx | l4lx_thread_create: Created thread 11.03 (tamer0) l4lx | Tamer0 is 11.03 l4lx | Using tamed mode. ROOT: Sending all ports (for cli/sti) to task #10 l4lx | Got 65536 out of 65536 I/O ports l4lx | Connecting to l4io server. l4lx | l4env_linux_startup thread 4. l4lx | l4lx_thread_create: Created thread 11.04 (cpu0) l4lx | main thread will be 11.04 l4lx | l4env_register_pointer_section: addr = 006f6000 size = 1032192 l4lx | sec-w-init: virt: 0x006f6000 to 0x007f1fff [1008 KiB] l4lx | sec-w-init: Number of physical regions: 1, 1032192 Bytes l4lx | sec-w-init: 1: Phys: 0x01b8b000 to 0x01c87000, Size: 1032192 l4lx | main thread: received startup message. l4lx | memory_setup: mem=64M load_ramdisk=1 ramdisk_size=16384 root=/dev/ram l4lx : l4env_rd=drops.rd l4lx | setup_l4env_memory: Forcing superpages for main memory l4lx | Main thread running, waiting... l4lx | Main memory size: 64MB l4lx | Got 2048kB of ISA DMA memory. l4lx | ISA DMA memory: virt: 0x00800000 to 0x009fffff [2048 KiB] l4lx | ISA DMA memory: Number of physical regions: 1, 2097152 Bytes l4lx | ISA DMA memory: 1: Phys: 0x0043a000 to 0x0063a000, Size: 2097152 l4lx | Main memory: virt: 0x00c00000 to 0x04bfffff [65536 KiB] l4lx | Main memory: Number of physical regions: 1, 67108864 Bytes l4lx | Main memory: 1: Phys: 0x02400000 to 0x06400000, Size: 67108864 l4lx | Filling lower ptabs... l4lx | mainmem = c00000 usbhid | <6>input: QEMU 0.9.1 QEMU USB Mouse as /class/input/input0 usbhid | connect "QEMU 0.9.1 QEMU USB Mouse" usbhid | <6>input: USB HID v0.01 Mouse [QEMU 0.9.1 QEMU USB Mouse] on usb-ddeu usbhid : sb_vhcd-1 l4lx | Done (1481 entries). l4lx | l4env_register_pointer_section: addr = 006f6000 size = 1032192 l4lx | end: virt: 0x006f6000 to 0x007f1fff [1008 KiB] l4lx | end: Number of physical regions: 1, 1032192 Bytes l4lx | end: 1: Phys: 0x01b8b000 to 0x01c87000, Size: 1032192 l4lx | memory_setup done l4lx | l4env_rd_path: drops.rd l4lx | Loading: drops.rd l4lx | INITRD: Size of RAMdisk is 16384KiB l4lx | RAMdisk from 04c00000 to 05c00000 [16384KiB] l4lx | l4lx_thread_create: Created thread 11.05 (timer.i0) l4lx | Jumping over 4x 'hlt' at 0x729944 l4lx | idler0: utcb=0xbff00400 11.04 l4lx | l4lx_thread_create: Created thread 11.06 (idler0) l4lx | Starting L4FB via DOpE l4dope | SharedMem(alloc): hl.raw=100000, id=dc, size=96000 l4dope | SharedMem(get_adr): address = 0x800000 l4lx | l4lx_thread_create: Created thread 11.08 (DOpE refresher) l4lx | l4lx_thread_create: Created thread 11.09 (L4DOpEinput) usbcore | <6>usb 1-2: USB disconnect, address 2 l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 14. l4lx | l4lx_thread_create: Created thread 11.0a (IRQ14) l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 15. l4lx | l4lx_thread_create: Created thread 11.0b (IRQ15) l4lx | l4lx_irq_dev_startup_hw: Starting IRQ thread for IRQ 11. l4lx | l4lx_thread_create: Created thread 11.0c (IRQ11)
On Wed, Apr 29, 2009 at 3:42 PM, Neohtm neohtm@gmail.com wrote:
Hi all,
I tried to run the tudos-demo-cd.iso with qemu 'qemu -m 256 -cdrom tudos-demo-cd.iso -usbdevice mouse' and it's running perfectly with the usb mouse and keyboard.
but when i tried on the one i'm compiled. the mouse and keyboard not functioning at all and returns a kernel panic.
Please help.....
Regards, neohtm
Below are the output of the error.
Welcome to Fiasco(ia32)! DD-L4(v2)/ia32 microkernel (C) 1998-2009 TU Dresden Rev: r438 compiled with gcc 4.3.2 for Intel Pentium [] Performance-critical config option(s) detected: CONFIG_NDEBUG is off CONFIG_NO_FRAME_PTR is off
Enabling special fully nested mode for PIC Using the PIT (i8254) on IRQ 0 for scheduling SERIAL ESC: allocated IRQ 4 for serial uart SERIAL ESC: allocated IRQ 4 for serial uart Not using serial hack in slow timer handler. Absolute KIP Syscalls using: Sysenter CPU: GenuineIntel (6:3:3:0) Model: Pentium II (Klamath) at 1795 MHz
32 KB L1 I Cache (8-way associative, 64 bytes per line) 32 KB L1 D Cache (8-way associative, 64 bytes per line) 2048 KB L2 U Cache (8-way associative, 64 bytes per line)
Freeing init code/data: 24576 bytes (6 pages)
Calibrating timer loop... done. SIGMA0: Hello! KIP @ 1000 Found Fiasco: KIP syscalls: yes allocated 4KB for maintenance structures
Roottask. Command line found: "(cd)/boot/l4/l4env/roottask task modname "loader" allow_cli task modname "bmodfs" attached 5 modules"
261695kB ( 255MB) total RAM (reported by bootloader) 234760kB ( 230MB) received RAM from Sigma0 34212kB ( 34MB) reserved RAM for RMGR Received I/O ports 0000-ffff Attached irqs = [ <!0> 1 <!2> 3 <!4> 5 6 7 8 9 A B C D E F 10 11 ]
Roottask: Parsing command line config. configured task 0x00 (loader): vm_offs:0 irq:3ffff lmcp:ffff allow_cli:1 mcp:ff prio:10 small:ff mods:0 configured task 0x00 (bmodfs): vm_offs:0 irq:3ffff lmcp:ffff allow_cli:0 mcp:ff prio:10 small:ff mods:5
Roottask: Loading 17 modules. #05: loading "(cd)/boot/l4/l4env/events" from [0612e000-0616fe99] to [01540000-01549190][0154a000-0155f590] entry at 0005f374 via trampoline page code symbols at [0eb74000-0eb76000] (8kB), lines at [0eb6d000-0eb74000] (28kB) #06: loading "(cd)/boot/l4/l4env/names --events" from [06170000-061b1c12] to [002d0000-002d6a37][002d7000-002e2000] entry at 0006037c via trampoline page code symbols at [0eb6b000-0eb6d000] (8kB), lines at [0eb65000-0eb6b000] (24kB) #07: loading "(cd)/boot/l4/l4env/log" from [061b2000-061efd07] to [00400000-00406eca][00407000-00439808] entry at 00061370 via trampoline page code symbols at [0eb63000-0eb65000] (8kB), lines at [0eb5d000-0eb63000] (24kB) #08: loading "(cd)/boot/l4/l4env/dm_phys --isa=0x00800000" from [061f0000-0628a8b4] to [01500000-01513cb7][01514000-0151e000] entry at 00062384 via trampoline page code symbols at [0eb58000-0eb5d000] (20kB), lines at [0eb4a000-0eb58000] (56kB) #09: loading "(cd)/boot/l4/l4env/simple_ts -t 300" from [0628b000-062d8310] to [01400000-01408dea][01409000-014185e8] entry at 0006337c via trampoline page code symbols at [0eb48000-0eb4a000] (8kB), lines at [0eb40000-0eb48000] (32kB) #0a: loading "(cd)/boot/l4/l4env/rtc" from [062d9000-06308a5c] to [01080000-010845c0][01085000-0108a000] entry at 00064370 via trampoline page code symbols at [0eb3e000-0eb40000] (8kB), lines at [0eb39000-0eb3e000] (20kB) #0b: loading "(cd)/boot/l4/l4env/l4io" from [06309000-0654a391] to [00c20000-00c45315][00c46000-00cb4000] entry at 00066370 via trampoline page code symbols at [0eae3000-0eb39000] (344kB), lines at [0eac9000-0eae3000] (104kB) #0c: loading "(cd)/boot/l4/l4env/l4dope" from [0654b000-066c2384] to [01b00000-01b45ef1][01b46000-01b8b000] entry at 00067374 via trampoline page code symbols at [0eabb000-0eac9000] (56kB), lines at [0ea8d000-0eabb000] (184kB) #0d: loading "(cd)/boot/l4/usb/usbcore" from [066c3000-068faac1] to [008e0000-0092600d][00927000-0094c000] entry at 00068374 via trampoline page code symbols at [0ea81000-0ea8d000] (48kB), lines at [0ea4b000-0ea81000] (216kB) #0e: loading "(cd)/boot/l4/usb/usbhid" from [068fb000-06aa0604] to [01900000-0193e269][0193f000-01966000] entry at 00069370 via trampoline page code symbols at [0ea42000-0ea4b000] (36kB), lines at [0ea17000-0ea42000] (172kB) #0f: loading "(cd)/boot/l4/l4env/bmodfs" from [06aa1000-06b48f8d] to [01220000-01238689][01239000-01250000] passing module (cd)/boot/l4/cfg/l4linux26.cfg [ 06b49000-06b49165 ] passing module (cd)/boot/l4/l4env/libloader.s.so [ 06b4a000-06be8f11 ] passing module (cd)/boot/l4/l4env/libld-l4.s.so [ 06be9000-06c62219 ] passing module (cd)/boot/l4/l4linux/vmlinuz [ 06c63000-07019183 ] passing module (cd)/boot/l4/l4linux/drops.rd [ 0701a000-0801a000 ] entry at 0006a46c via trampoline page code symbols at [0ea12000-0ea17000] (20kB), lines at [0e9ff000-0ea12000] (76kB) #10: loading "(cd)/boot/l4/l4env/loader --fprov=BMODFS l4linux26.cfg" from [0801a000-080f8b6d] to [01300000-013291c9][0132a000-01349000] entry at 0006b390 via trampoline page code symbols at [0e9f8000-0e9ff000] (28kB), lines at [0e9de000-0e9f8000] (104kB)
ROOT: Sending ports 0070-0070 to task #0a ROOT: Sending ports 0080-0080 to task #0a ROOT: Sending ports 0071-0071 to task #0a names | Starting thread listening for `exit' events rtc | Date:29.04.2009 Time:07:33:01 simplets| Configured for 300 tasks. loader | Can't map tbuf status page usbcore | main(): DDE USB CORE initiaizing: usbcore | main(): Initializing DDE base system. io | Using platform configuration 'x86' ROOT: Sending ports 0cfb-0cfb to task #0b ROOT: Sending ports 0cf8-0cfb to task #0b ROOT: Sending ports 0cfe-0cff to task #0b io | PCI: Using configuration type 1 io | PCI: Probing PCI hardware io | PCI: Probing PCI hardware (bus 00) ROOT: Sending ports 0cfc-0cff to task #0b io | PCI: PIIX3: Enabling Passive Release on 00:01.0 io | Limiting direct PCI/PCI transfers. io | Activating ISA DMA hang workarounds. io | 00000000-ffffffff : PCI mem io | f0000000-f1ffffff : Cirrus Logic GD 5446 io | f2000000-f2000fff : Cirrus Logic GD 5446 io | 0000-ffff : PCI IO io | 0cf8-0cff : PCI conf1 io | b000-b03f : Intel Corporation 82371AB/EB/MB PIIX4 ACPI io | b100-b11f : Intel Corporation 82371AB/EB/MB PIIX4 ACPI io | c000-c00f : Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] io | c020-c03f : Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] io | c100-c1ff : Realtek Semiconductor Co., Ltd. RTL-8029(AS) bmodfs | Passed the following modules: bmodfs | module "(cd)/boot/l4/cfg/l4linux26.cfg" (1kB) bmodfs | module "(cd)/boot/l4/l4env/libloader.s.so" (636kB) bmodfs | module "(cd)/boot/l4/l4env/libld-l4.s.so" (485kB) bmodfs | module "(cd)/boot/l4/l4linux/vmlinuz" (3801kB) bmodfs | module "(cd)/boot/l4/l4linux/drops.rd" (16384kB) loader | sleeping for 1000 ms io | Available IRQs=[ <!0> 1 <!2> 3 <!4> 5 6 7 8 9 a b c d e f 10 11 ] l4dope | L4INPUT native mode activated l4dope | L4INPUT: !!! W A R N I N G !!! l4dope | L4INPUT: Please, do not use Fiasco's "-esc" with L4INPUT. l4dope | L4INPUT: !!! W A R N I N G !!! ROOT: Sending ports 0060-006f to task #0b l4dope | Failed to disable AUX port, but continuing anyway... Is this a SiS? l4dope | If AUX port is really absent please use the 'i8042.noaux' option. l4dope | serio: i8042 KBD port at 0x60,0x64 irq 1 l4dope | input: AT Raw Set 2 keyboard on isa0060/serio0 l4dope | input: PC Speaker l4dope | input: L4 input event injector l4dope | L4 input event injector: IRQ handler up l4dope | connect "AT Raw Set 2 keyboard", isa0060/serio0/input0 l4dope | connect "PC Speaker", isa0061/input0 l4dope | connect "L4 input event injector", l4/sys l4dope | SharedMem(alloc): hl.raw=100000, id=44, size=800 l4dope | SharedMem(get_adr): address = 0x5000 l4dope | SharedMem(alloc): hl.raw=100000, id=45, size=800 l4dope | SharedMem(get_adr): address = 0x6000 l4dope | SharedMem(alloc): hl.raw=100000, id=46, size=800 l4dope | SharedMem(get_adr): address = 0x7000 l4dope | SharedMem(alloc): hl.raw=100000, id=47, size=800 l4dope | SharedMem(get_adr): address = 0xd000 l4dope | SharedMem(alloc): hl.raw=100000, id=48, size=800 l4dope | SharedMem(get_adr): address = 0xe000 l4dope | SharedMem(alloc): hl.raw=100000, id=49, size=800 l4dope | SharedMem(get_adr): address = 0xf000 l4dope | SharedMem(alloc): hl.raw=100000, id=4b, size=800 l4dope | SharedMem(get_adr): address = 0x16000 usbcore | main(): Initializing DDE kmalloc. usbcore | main(): Initializing DDE process. usbcore | main(): Initializing DDE timers. usbhid | l4dde_mm_init(): Using ... usbhid | 16 kB at 0x00002000 (vmem) usbhid | 128 kB in 1 regions (kmem) l4dope | SharedMem(alloc): hl.raw=100000, id=55, size=484 l4dope | SharedMem(get_adr): address = 0x20000 l4dope | dope: paddr=f0000000 size=4096KiB l4dope | Mapped video memory at f0000000 to 00400000+000000 [4096kB] via L4IO l4dope | mapping: vaddr=0x400000 size=4194304(0x400000) offset=0(0x0) l4dope | Frame buffer base: 0x400000 l4dope | Resolution: 1024x768x16 l4dope | Bytes per scanline: 2048 l4dope | Current video mode is 1024x768 red=11:5 green=5:6 blue=0:5 res=0:0 usbcore | main(): Initializing DDE softirq. usbcore | Softirq daemon starting usbcore | main(): Doing initcalls... usbcore | Initializing DDE page cache usbcore | <6>usbcore: registered new interface driver hub usbhid | register_chrdev(): called input usbhid | register_chrdev(): called usb usbhid | usb: registered new driver hub usbhid | usb: $Revision: 238 $ time 17:10:21 Apr 11 2009 usbhid | usb: High bandwidth mode enabled io | PCI: Setting latency timer of device 00:01.2 to 64 usbhid | /home/user/Desktop/tudos/l4/pkg/usbhid/server/lib-linux/contrib/usb/h usbhid : ost/usb-uhci.c: USB UHCI at I/O 0xc020, IRQ 9 ROOT: Sending ports c030-c031 to task #0e ROOT: Sending ports c032-c033 to task #0e ROOT: Sending ports c034-c035 to task #0e usbhid | usb: Detected 2 ports ROOT: Cannot send port c030 to task #0b, owner is #0e io | [B.2] l4io/server/src/res.c:414:l4_io_request_region_component(): io | sigma0 request for I/O ports [c020,c040) failed (err=0 dw1=0) io |
--PANIC, 'g' for exit------------------------------------IP:00c21185 [io] (b.02) jdb: