Hi all! I need your help again. I have built the fiasco,l4env,l4linux on my fedora core 5. But there are someting wrong with booting l4linux,it says "The running kernel does not have the l4lx segments " and goes to jdb. The following is the log when booting ,and also the configuration file ,menu.list Thx!
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LOG >>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Welcome to Fiasco(ia32)! DD-L4(v2)/x86 microkernel (C) 1998-2007 TU Dresden Rev: r121 compiled with gcc 4.1.0 for Intel Pentium Performance-critical config option(s) detected: CONFIG_NDEBUG is off Enabling special fully nested mode for PIC Using the PIT (i8254) on IRQ 0 for scheduling SERIAL ESC: allocated IRQ 4 for serial uart SERIAL ESC: allocated IRQ 4 for serial uart Not using serial hack in slow timer handler. Absolute KIP Syscalls using: Sysenter CPU: GenuineIntel (F:4:3:0) Model: Pentium 4E (Prescott/Nocona) at 3000 MHz 128 Entry I TLB (4K or 4M pages) 64 Entry D TLB (4k or 4M pages) 12K ?ops T Cache (8-way associative) 16 KB L1 D Cache (8-way associative, 64 bytes per line) 2048 KB L2 U Cache (8-way associative, 64 bytes per line) Freeing init code/data: 20480 bytes (5 pages) Calibrating timer loop... done. SIGMA0: Hello! KIP @ 1000 Found Fiasco: KIP syscalls: yes allocated 4KB for maintenance structures Roottask. Command line found: "/boot/l4linux/roottask task modname "bmodfs" attached 4 modules" 507454kB ( 495MB) total RAM (reported by bootloader) 461396kB ( 451MB) received RAM from Sigma0 25504kB ( 25MB) reserved RAM for RMGR Received I/O ports 0000-ffff Attached irqs = [ <!0> 1 <!2> 3 <!4> 5 6 7 8 9 A B C D E F 10 11 ] Roottask: Parsing command line config. configured task 0x00 (bmodfs): vm_offs:0 irq:3ffff lmcp:ffff allow_cli:0 mcp:ff prio:10 small:ff mods:4 Roottask: Loading 14 modules. #05: loading "/boot/l4linux/events" from [06121000-06161f16] to [01540000-01548b30][01549000-0155e5d0] entry at 0005b370 via trampoline page code symbols at [1c841000-1c843000] (8kB), lines at [1c83b000-1c841000] (24kB) #06: loading "/boot/l4linux/names --events" from [06162000-0619fc75] to [002d0000-002d5eca][002d6000-002e1000] entry at 0005c378 via trampoline page code symbols at [1c839000-1c83b000] (8kB), lines at [1c834000-1c839000] (20kB) #07: loading "/boot/l4linux/log --events" from [061a0000-061db22f] to [00400000-0040688a][00407000-00439848] entry at 0005d374 via trampoline page code symbols at [1c832000-1c834000] (8kB), lines at [1c82c000-1c832000] (24kB) #08: loading "/boot/l4linux/loader --fprov=BMODFS linuz26.cfg" from [061dc000-062ade15] to [01300000-01324d9d][01325000-01343000] entry at 0005e388 via trampoline page code symbols at [1c826000-1c82c000] (24kB), lines at [1c80f000-1c826000] (92kB) #09: loading "/boot/l4linux/dm_phys --isa=0x00800000 -v --events" from [062ae000-06337fa6] to [01500000-0151218a][01513000-0151d000] entry at 0005f38c via trampoline page code symbols at [1c80a000-1c80f000] (20kB), lines at [1c7fe000-1c80a000] (48kB) #0a: loading "/boot/l4linux/simple_ts -t 300 --events" from [06338000-06381ed6] to [01400000-0140814a][01409000-01418608] entry at 00061380 via trampoline page code symbols at [1c7fc000-1c7fe000] (8kB), lines at [1c7f5000-1c7fc000] (28kB) #0b: loading "/boot/l4linux/rtc --events" from [06382000-063b1cd7] to [01080000-010840c0][01085000-0108a000] entry at 00062374 via trampoline page code symbols at [1c7f3000-1c7f5000] (8kB), lines at [1c7ef000-1c7f3000] (16kB) #0c: loading "/boot/l4linux/l4io --noirq --events" from [063b2000-066098e5] to [00b80000-00ba21b1][00ba3000-00c0b000] entry at 0006337c via trampoline page code symbols at [1c79c000-1c7ef000] (332kB), lines at [1c784000-1c79c000] (96kB) #0d: loading "/boot/l4linux/l4dope --l4io " from [0660a000-06772ae0] to [01b00000-01b40fe5][01b41000-01b82000] entry at 00064378 via trampoline page code symbols at [1c776000-1c784000] (56kB), lines at [1c74c000-1c776000] (168kB) #0e: loading "/boot/l4linux/bmodfs" from [06773000-0680f912] to [01220000-0123559d][01236000-0124d000] passing module /boot/l4linux/vmlinuz26 [ 06810000-07752e29 ] passing module /boot/l4linux/linuz26.cfg [ 07753000-0775307a ] passing module /boot/l4linux/libloader.s.so [ 07754000-077f182c ] passing module /boot/l4linux/libld-l4.s.so [ 077f2000-0786a8f1 ] entry at 00065420 via trampoline page code symbols at [1c747000-1c74c000] (20kB), lines at [1c737000-1c747000] (64kB) log | /boot/l4linux/log: unrecognized option `--events' log | Unrecognized option: - ? log | Usage: /boot/l4linux/log <options>. Option list: log | [ -h | --help ] - this help log | [ -v | --verbose ] - verbose mode log | [ -l | --local ] - flush to local console log | [ -L | --nolocal ] - do not flush to local console log | [ -s | --comport num ] - flush to specified serial interface (0) log | [ -e | --serial-esc ] - enter kdebug on esc on serial log | [ -b | --buffer num ] - buffered mode (0) log | [ --flushprio num ] - priority of flusher thread (0x20) log | [ -p | --prio num ] - priority of main thread (0x20) names | Starting thread listening for `exit' events simplets| Configured for 300 tasks. rtc | Date:09.07.2007 Time:08:54:28 DMphys | DMphys memory map: DMphys | phys. memory 0x00000000-0x1eff0000 (from L4 kernel info page) DMphys | using 0x00100000-0x1eff0000 DMphys | Memory area Pool PS Flags DMphys | 0x00000000-0x0009f000 -- -- RESERVED DMphys | 0x00100000-0x00161000 -- -- RESERVED DMphys | 0x00161000-0x001cc000 -- -- DENIED DMphys | 0x001cc000-0x002d0000 7 12 MAPPED DMphys | 0x002d0000-0x002e1000 -- -- DENIED DMphys | 0x002e1000-0x00400000 7 12 MAPPED DMphys | 0x00400000-0x0043a000 -- -- DENIED DMphys | 0x0043a000-0x00a17000 7 12 MAPPED DMphys | 0x00a17000-0x00b80000 0 12 MAPPED DMphys | 0x00b80000-0x00c0b000 -- -- DENIED DMphys | 0x00c0b000-0x01080000 0 12 MAPPED DMphys | 0x01080000-0x0108a000 -- -- DENIED DMphys | 0x0108a000-0x01220000 0 12 MAPPED DMphys | 0x01220000-0x0124d000 -- -- DENIED DMphys | 0x0124d000-0x01300000 0 12 MAPPED DMphys | 0x01300000-0x01343000 -- -- DENIED DMphys | 0x01343000-0x01400000 0 12 MAPPED DMphys | 0x01400000-0x01419000 -- -- DENIED DMphys | 0x01419000-0x01500000 0 12 MAPPED DMphys | 0x01500000-0x0151c000 -- -- RESERVED DMphys | 0x0151c000-0x01540000 0 12 MAPPED DMphys | 0x01540000-0x0155f000 -- -- DENIED DMphys | 0x0155f000-0x01b00000 0 12 MAPPED DMphys | 0x01b00000-0x01b82000 -- -- DENIED DMphys | 0x01b82000-0x01c00000 0 12 MAPPED DMphys | 0x01c00000-0x06800000 0 22 MAPPED DMphys | 0x06800000-0x06810000 0 12 MAPPED DMphys | 0x06810000-0x0786b000 -- -- DENIED DMphys | 0x0786b000-0x07c00000 0 12 MAPPED DMphys | 0x07c00000-0x1c400000 0 22 MAPPED DMphys | 0x1c400000-0x1c737000 0 12 MAPPED DMphys | 0x1c737000-0x1eff0000 -- -- DENIED DMphys | DMphys | DMphys memory pools: DMphys | pool 0 (Default memory pool): DMphys | size: 437160KB total, 437160KB free, 32KB reserved DMphys | 0x00a17000-0x00b80000 ( 1444KB, 1MB) free DS: DMphys | 0x00c0b000-0x01080000 ( 4564KB, 4MB) free DS: DMphys | 0x0108a000-0x01220000 ( 1624KB, 2MB) free DS: DMphys | 0x0124d000-0x01300000 ( 716KB, 1MB) free DS: DMphys | 0x01343000-0x01400000 ( 756KB, 1MB) free DS: DMphys | 0x01419000-0x01500000 ( 924KB, 1MB) free DS: DMphys | 0x0151c000-0x01540000 ( 144KB, 0MB) free DS: DMphys | 0x0155f000-0x01b00000 ( 5764KB, 6MB) free DS: DMphys | 0x01b82000-0x06810000 ( 78392KB, 77MB) free DS: DMphys | 0x0786b000-0x1c737000 (342832KB, 335MB) free DS: DMphys | pool 7 (ISA DMA memory pool): DMphys | size: 8192KB total, 8192KB free, 0KB reserved DMphys | 0x001cc000-0x002d0000 ( 1040KB, 1MB) free DS: DMphys | 0x002e1000-0x00400000 ( 1148KB, 1MB) free DS: DMphys | 0x0043a000-0x00a17000 ( 6004KB, 6MB) free DS: bmodfs | Passed the following modules: bmodfs | module "/boot/l4linux/vmlinuz26" (15628kB) bmodfs | module "/boot/l4linux/linuz26.cfg" (1kB) bmodfs | module "/boot/l4linux/libloader.s.so" (631kB) bmodfs | module "/boot/l4linux/libld-l4.s.so" (483kB) loader | vmlinuz26: Starting application using libld-l4.s.so loader | vmlinuz26,#f: Loading binary loader | vmlinuz26,#f: Loading ldso loader | Capability support not enabled. loader | vmlinuz26,#f: Starting libld-l4.s.so at 00013870 via 0000cc54 l4dope | /boot/l4linux/l4dope: unrecognized option `--l4io' l4dope | DOpE(init): unknown option! io | /boot/l4linux/l4io: unrecognized option `--noirq' io | Enabling events support. io | PCI: Using configuration type 1 io | PCI: Probing PCI hardware io | PCI: Probing PCI hardware (bus 00) io | PCI: Ignoring BAR0-3 of IDE controller 00:1f.2 io | Transparent bridge - Intel Corporation 82801 PCI Bridge io | 00000000-ffffffff : PCI mem io | e0000000-efffffff : Intel Corporation 82865G/PE/P DRAM Controller/H io : ost-Hub Interface io | f0000000-f7ffffff : Intel Corporation 82865G Integrated Graphics Co io : ntroller io | f9000000-f90000ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/ io : 8139C+ io | f9001000-f9001fff : Intel Corporation 82801EB/ER (ICH5/ICH5R) integ io : rated LAN Controller io | fa000000-fa07ffff : Intel Corporation 82865G Integrated Graphics Co io : ntroller io | fa080000-fa0803ff : Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 io : EHCI Controller io | fa081000-fa0811ff : Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 io : Audio Controller io | fa082000-fa0820ff : Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 io : Audio Controller io | 0000-ffff : PCI IO io | 0cf8-0cff : PCI conf1 io | 1400-141f : Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Control io : ler io | a000-a0ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ io | a400-a43f : Intel Corporation 82801EB/ER (ICH5/ICH5R) integrated LA io : N Controller io | b000-b01f : Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Cont io : roller #1 io | b400-b41f : Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Cont io : roller #2 io | b800-b81f : Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Cont io : roller #3 io | bc00-bc1f : Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Cont io : roller #4 io | c000-c007 : Intel Corporation 82865G Integrated Graphics Controller io | dc00-dcff : Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio C io : ontroller io | e000-e03f : Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio C io : ontroller io | f000-f00f : Intel Corporation 82801EB (ICH5) SATA Controller io | Available IRQs=[ <!0> 1 <!2> 3 <!4> 5 6 7 8 9 a b c d e f 10 11 ] l4dope | L4INPUT native mode activated l4dope | L4INPUT: !!! W A R N I N G !!! l4dope | L4INPUT: Please, do not use Fiasco's "-esc" with L4INPUT. l4dope | L4INPUT: !!! W A R N I N G !!! ROOT: Sending ports 0060-006f to task #0c l4dope | serio: i8042 AUX port at 0x60,0x64 irq 12 l4dope | serio: i8042 KBD port at 0x60,0x64 irq 1 l4lx | ======> L4Linux 2.6 starting... <======== l4lx | Linux version 2.6.21-l4 (root@lgh-FC5) (gcc version 4.1.0 20060304 (R l4lx : ed Hat 4.1.0-3)) #19 Wed Jul 4 10:19:59 CST 2007 l4lx | Binary name: vmlinuz26 l4lx | Kernel command line (4 args): earlyprintk=yes mem=256M video=l4fb roo l4lx : t=/dev/sda7 l4lx | The running kernel does not have the l4lx | segments l4lx | feature enabled! --kernel feature missing!--------------------------------IP: 0040163b [l4lx.main] (f.02) jdb:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
the config file "linuz26.config" >>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
verbose 0 task "vmlinuz26" "earlyprintk=yes mem=256M video=l4fb root=/dev/sda7" all_sects_writable allow_cli allow_vga
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
the menu.list of grub >>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
title L4Linux26/Fiasco+dope root (hd0,6) kernel /boot/l4linux/bootstrap modaddr 0x06000000 module /boot/l4linux/main -nowait -nokdb -serial_esc -comspeed 115200 -c omport 1 module /boot/l4linux/sigma0 module /boot/l4linux/roottask task modname "bmodfs" attached 4 modules module /boot/l4linux/events module /boot/l4linux/names --events module /boot/l4linux/log --events module /boot/l4linux/loader --fprov=BMODFS linuz26.cfg module /boot/l4linux/dm_phys --isa=0x00800000 -v --events module /boot/l4linux/simple_ts -t 300 --events module /boot/l4linux/rtc --events module /boot/l4linux/l4io --noirq --events module /boot/l4linux/l4dope --l4io module /boot/l4linux/bmodfs module /boot/l4linux/vmlinuz26 module /boot/l4linux/linuz26.cfg module /boot/l4linux/libloader.s.so module /boot/l4linux/libld-l4.s.so vbeset 0x117 506070 boot ------------------------------------------------------------------- MOTONBA篮球赛招募( http://d1.sina.com.cn/sina/limeng3/mail_zhuiyu/2007/mail_zhuiyu_20070709.htm... ) =================================================================== 注册新浪2G免费邮箱（ http://mail.sina.com.cn/chooseMode.html ）
Hi, On Fri Jul 13, 2007 at 09:17:19 +0800, junioraozhi@sina.com wrote:
I have built the fiasco,l4env,l4linux on my fedora core 5.
But there are someting wrong with booting l4linux,it says "The running kernel does not have the l4lx segments " and goes to jdb.
You need to enable "Handle and preserve segments" under "Kernel Options" and "ABI Extensions" in the Fiasco configuration menu. Enable the experimental features before. Adam -- Adam adam@os.inf.tu-dresden.de Lackorzynski http://os.inf.tu-dresden.de/~adam/
participants (2)
-
Adam Lackorzynski -
junioraozhi＠sina.com