November 2006 - l4-hackers - example.com Site

Re: What is mean of this log?
by chenggh 16 Nov '06

16 Nov '06

On Thursday 16 November 2006 21:19, Christian Stüble wrote: > Hi, > > Am Donnerstag, 16. November 2006 12:45 schrieb chenggh: > > Hi: > > When I boot the L4Linux with L4dope, There are some log statements like > > this: > > > > l4dope | psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost > > synchronization, > > l4dope : throwing 3 bytes away. > > l4dope | psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost > > synchronization, > > l4dope : throwing 3 bytes away. > > This looks like Linux is trying to access the input HW directly. I was able > to prevent this messages (and allow user I/O) by reconfiguring L4-Linux: 1) > Activate General/For small systems > 2) Then you can deactivate PC keyboard support etc. > 3) Also disable HW serial support > > > l4lx | Terminating L4Linux. > > l4lx | L4RM: [PF] read at 0x00000a28, ip 00000a29, src 10.02 > > l4lx | [10.0] l4rm/lib/src/pagefault.c:78:__unknown_pf(): > > l4lx | unhandled page fault > > This error happens here if I try to execute an older L4-Linux binary. Thank you very much. Now my l4dope and l4linux is ok. Nothing error could appear. The minicom log is like this: log | (hd0,1)/boot/L4Linux/log: unrecognized option `--events' log | Unrecognized option: - ? log | Usage: (hd0,1)/boot/L4Linux/log <options>. Option list: log | [ -h | --help ] - this help log | [ -v | --verbose ] - verbose mode log | [ -l | --local ] - flush to local console log | [ -L | --nolocal ] - do not flush to local console log | [ -s | --comport num ] - flush to specified serial interface (0) log | [ -e | --serial-esc ] - enter kdebug on esc on serial log | [ -b | --buffer num ] - buffered mode (0) log | [ --flushprio num ] - priority of flusher thread (0x20) log | [ -p | --prio num ] - priority of main thread (0x20) names | Starting thread listening for `exit' events simplets| Configured for 300 tasks. rtc | Date:16.11.2006 Time:15:05:15 DMphys | DMphys memory map: DMphys | phys. memory 0x00000000-0x1dff0000 (from L4 kernel info page) DMphys | using 0x00100000-0x1dff0000 DMphys | Memory area Pool PS Flags DMphys | 0x00000000-0x00100000 -- -- RESERVED DMphys | 0x00100000-0x00134000 7 12 MAPPED DMphys | 0x00134000-0x001cb000 -- -- DENIED DMphys | 0x001cb000-0x002d0000 7 12 MAPPED DMphys | 0x002d0000-0x002e3000 -- -- DENIED DMphys | 0x002e3000-0x00400000 7 12 MAPPED DMphys | 0x00400000-0x0043a000 -- -- DENIED DMphys | 0x0043a000-0x009e4000 7 12 MAPPED DMphys | 0x009e4000-0x00b80000 0 12 MAPPED DMphys | 0x00b80000-0x00bef000 -- -- DENIED DMphys | 0x00bef000-0x00c00000 0 12 MAPPED DMphys | 0x00c00000-0x01000000 0 22 MAPPED DMphys | 0x01000000-0x01080000 0 12 MAPPED DMphys | 0x01080000-0x0108a000 -- -- DENIED DMphys | 0x0108a000-0x01100000 0 12 MAPPED DMphys | 0x01100000-0x0114b000 -- -- DENIED DMphys | 0x0114b000-0x01220000 0 12 MAPPED DMphys | 0x01220000-0x01256000 -- -- DENIED DMphys | 0x01256000-0x01300000 0 12 MAPPED DMphys | 0x01300000-0x0134d000 -- -- DENIED DMphys | 0x0134d000-0x01400000 0 12 MAPPED DMphys | 0x01400000-0x0141c000 -- -- DENIED DMphys | 0x0141c000-0x01500000 0 12 MAPPED DMphys | 0x01500000-0x0151b000 -- -- RESERVED DMphys | 0x0151b000-0x01540000 0 12 MAPPED DMphys | 0x01540000-0x0154d000 -- -- DENIED DMphys | 0x0154d000-0x01b00000 0 12 MAPPED DMphys | 0x01b00000-0x01b8c000 -- -- DENIED DMphys | 0x01b8c000-0x01c00000 0 12 MAPPED DMphys | 0x01c00000-0x06800000 0 22 MAPPED DMphys | 0x06800000-0x068b8000 0 12 MAPPED DMphys | 0x068b8000-0x077f9000 -- -- DENIED DMphys | 0x077f9000-0x07800000 0 12 MAPPED DMphys | 0x07800000-0x1b800000 0 22 MAPPED DMphys | 0x1b800000-0x1b839000 0 12 MAPPED DMphys | 0x1b839000-0x1dff0000 -- -- DENIED DMphys | DMphys | DMphys memory pools: DMphys | pool 0 (Default memory pool): DMphys | size: 422900KB total, 422900KB free, 32KB reserved DMphys | 0x009e4000-0x00b80000 ( 1648KB, 2MB) DMphys | 0x00bef000-0x01080000 ( 4676KB, 5MB) DMphys | 0x0108a000-0x01100000 ( 472KB, 0MB) DMphys | 0x0114b000-0x01220000 ( 852KB, 1MB) DMphys | 0x01256000-0x01300000 ( 680KB, 1MB) DMphys | 0x0134d000-0x01400000 ( 716KB, 1MB) DMphys | 0x0141c000-0x01500000 ( 912KB, 1MB) DMphys | 0x0151b000-0x01540000 ( 148KB, 0MB) DMphys | 0x0154d000-0x01b00000 ( 5836KB, 6MB) DMphys | 0x01b8c000-0x068b8000 ( 79024KB, 77MB) DMphys | 0x077f9000-0x1b839000 (327936KB, 320MB) DMphys | pool 7 (ISA DMA memory pool): DMphys | size: 8192KB total, 8192KB free, 0KB reserved DMphys | 0x00100000-0x00134000 ( 208KB, 0MB) DMphys | 0x001cb000-0x002d0000 ( 1044KB, 1MB) DMphys | 0x002e3000-0x00400000 ( 1140KB, 1MB) DMphys | 0x0043a000-0x009e4000 ( 5800KB, 6MB) l4dope | DOpE(init): using L4 IO server l4dope | (hd0,1)/boot/L4Linux/l4dope: unrecognized option `--menubar' l4dope | DOpE(init): unknown option! l4dope | DOpE(init): using transparency io | do_args(): Disabling internal IRQ handling. io | do_args(): Enabling events support. io | CPU supports 8 MTRRs. Allocated: io | 0: 00000000-20000000 ( 512MB) type WB io | 1: 1e000000-20000000 ( 32MB) type UC io | 2: e8000000-ec000000 ( 64MB) type WC io | 3: e8000000-ec000000 ( 64MB) type WC io | PCI: Using configuration type 1 io | PCI: Probing PCI hardware io | PCI: Probing PCI hardware (bus 00) io | PCI: Via IRQ fixup bmodfs | Passed the following modules: bmodfs | module "(hd0,1)/boot/L4Linux/vmlinuz26" (14503kB) bmodfs | module "(hd0,1)/boot/L4Linux/linux26.cfg" (1kB) bmodfs | module "(hd0,1)/boot/L4Linux/libloader.s.so" (635kB) bmodfs | module "(hd0,1)/boot/L4Linux/libld-l4.s.so" (473kB) io | 00000000-ffffffff : PCI mem io | e0000000-e7ffffff : PCI Bus #01 io | e0000000-e7ffffff : S3 Inc. VT8375 [ProSavage8 KM266/KL266] io | e8000000-ebffffff : VIA Technologies, Inc. VT8375 [KM266/KL266] Hos io : t Bridge io | ec000000-ec0fffff : PCI Bus #01 io | ec000000-ec07ffff : S3 Inc. VT8375 [ProSavage8 KM266/KL266] io | ec100000-ec1000ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/ io : 8139C+ io | ec101000-ec1017ff : VIA Technologies, Inc. IEEE 1394 Host Controlle io : r io | ec102000-ec1020ff : VIA Technologies, Inc. USB 2.0 io | 0000-ffff : PCI IO io | 0cf8-0cff : PCI conf1 io | d000-d0ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ io | d400-d47f : VIA Technologies, Inc. IEEE 1394 Host Controller io | d800-d81f : VIA Technologies, Inc. USB io | dc00-dc1f : VIA Technologies, Inc. USB (#2) io | e000-e01f : VIA Technologies, Inc. USB (#3) io | e400-e40f : VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/ io : A/C PIPC Bus Master IDE io | e800-e8ff : VIA Technologies, Inc. VT8233/A/8235 AC97 Audio Control io : ler loader | vmlinuz26: Starting application using libld-l4.s.so loader | vmlinuz26,#10: Loading binary l4dope | L4INPUT: !!! W A R N I N G !!! l4dope | L4INPUT: Please, do not use Fiasco's "-esc" with L4INPUT. l4dope | L4INPUT: !!! W A R N I N G !!! loader | vmlinuz26,#10: Loading ldso loader | vmlinuz26,#10: Starting libld-l4.s.so at 00013870 via 0000bc54 l4dope | serio: i8042 AUX port at 0x60,0x64 irq 12 l4dope | serio: i8042 KBD port at 0x60,0x64 irq 1 l4dope | input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 l4lx | ======> L4Linux 2.6 starting... <======== l4lx | Linux version 2.6.17-l4 (root@fiasco-desktop) (gcc version 3.4.6 (Ubu l4lx : ntu 3.4.6-1ubuntu2)) #5 Thu Nov 16 22:52:26 CST 2006 l4lx | Binary name: vmlinuz26 l4lx | Kernel command line (4 args): earlyprintk=yes mem=256M video=l4fb roo l4lx : t=/dev/hda2 l4lx | Image: 00400000 - 00731000 [3268 KiB]. l4lx | Areas: Text: 00400000 - 00642000 [2312kB] (a bit longer) l4lx | Data: 00642000 - 0068bd8c [295kB] l4lx | Initdata: 0068e000 - 006bf000 [196kB] l4lx | BSS: 006c0000 - 0072f6f0 [445kB] l4lx | l4lx_thread_create: Created thread 10.03 (tamer) l4lx | Using tamed mode. l4lx | l4env_linux_startup thread 4. l4lx | l4lx_thread_create: Created thread 10.04 (server) l4lx | main thread will be 10.04 l4lx | l4env_register_pointer_section: addr = 00642000 size = 512000 l4lx | sec-w-init: virt: 0x00642000 to 0x006befff [500 KiB] l4lx | sec-w-init: Number of physical regions: 1, 512000 Bytes l4lx | sec-w-init: 1: Phys: 0x0142b000 to 0x014a8000, Size: 512000 l4lx | main thread: received startup message. l4lx | Main thread running, waiting... l4lx | setup_l4env_memory: Forcing superpages for main memory l4lx | Main memory size: 256MB l4lx | Got 2048kB of ISA DMA memory. l4lx | ISA DMA memory: virt: 0x00800000 to 0x009fffff [2048 KiB] l4lx | ISA DMA memory: Number of physical regions: 1, 2097152 Bytes l4lx | ISA DMA memory: 1: Phys: 0x0043a000 to 0x0063a000, Size: 2097152 l4lx | Main memory: virt: 0x00c00000 to 0x10bfffff [262144 KiB] l4lx | Main memory: Number of physical regions: 1, 268435456 Bytes l4lx | Main memory: 1: Phys: 0x07800000 to 0x17800000, Size: 268435456 l4lx | Filling lower ptabs... l4lx | Done (1611 entries). l4lx | l4lx_thread_create: Created thread 10.05 (timer.i0) l4lx | l4lx_thread_create: Created thread 10.06 (Idler) l4dope | input: AT Translated Set 2 keyboard on isa0060/serio0 l4dope | input: PC Speaker l4dope | input: L4 input event injector l4dope | L4 input event injector: IRQ handler up l4dope | connect "ImPS/2 Generic Wheel Mouse", isa0060/serio1/input0 l4dope | connect "AT Translated Set 2 keyboard", isa0060/serio0/input0 l4dope | connect "PC Speaker", isa0061/input0 l4dope | connect "L4 input event injector", l4/sys l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=60, size=800 l4dope | SharedMem(get_adr): address = 6000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=61, size=800 l4dope | SharedMem(get_adr): address = 7000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=62, size=800 l4dope | SharedMem(get_adr): address = d000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=63, size=800 l4dope | SharedMem(get_adr): address = e000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=64, size=800 l4dope | SharedMem(get_adr): address = f000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=66, size=800 l4dope | SharedMem(get_adr): address = 16000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=67, size=800 l4dope | SharedMem(get_adr): address = 17000 l4dope | dope: addr=e0000000 size=31680KiB io | Remapping I/O memory e0000000-e1ef0000 cached io | Setting MTRR 4 to e0000000-e2000000 type WC l4dope | Mapped video memory at e0000000 to 04000000+000000 [31680kB] via L4IO l4dope | mapping: vaddr=0x4000000 size=32440320(0x1ef0000) offset=0(0x0) l4dope | Frame buffer base: 0x4000000 l4dope | Resolution: 1024x768x16 l4dope | Bytes per scanline: 2048 l4dope | Current video mode is 1024x768 red=11:5 green=5:6 blue=0:5 res=0:0 l4lx | Starting L4FB via DOpE l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=75, size=96000 l4dope | SharedMem(get_adr): address = 400000 l4lx | l4lx_thread_create: Created thread 10.08 (DOpE refresher) l4lx | l4lx_thread_create: Created thread 10.09 (L4DOpEinput) l4lx | l4lx_thread_create: Created thread 10.0a (IRQ17) l4lx | l4lx_thread_create: Created thread 10.0b (IRQ16) l4lx | l4lx_thread_create: Created thread 10.0c (IRQ15) l4lx | l4lx_thread_create: Created thread 10.0d (IRQ14) l4lx | l4lx_thread_create: Created thread 10.0e (IRQ13) l4lx | l4lx_thread_create: Created thread 10.0f (IRQ11) l4lx | l4lx_thread_create: Created thread 10.10 (IRQ10) l4lx | l4lx_thread_create: Created thread 10.11 (IRQ9) l4lx | l4lx_thread_create: Created thread 10.12 (IRQ8) l4lx | l4lx_thread_create: Created thread 10.13 (IRQ7) l4lx | l4lx_thread_create: Created thread 10.14 (IRQ6) l4lx | l4lx_thread_create: Created thread 10.15 (IRQ5) l4lx | l4lx_thread_create: Created thread 10.16 (IRQ3) Best wishes. Thank you again. cheng

1 0

What is mean of this log?
by chenggh 16 Nov '06

16 Nov '06

Hi: When I boot the L4Linux with L4dope, There are some log statements like this: l4dope | psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, l4dope : throwing 3 bytes away. l4dope | psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, l4dope : throwing 3 bytes away. l4lx | Terminating L4Linux. l4lx | L4RM: [PF] read at 0x00000a28, ip 00000a29, src 10.02 l4lx | [10.0] l4rm/lib/src/pagefault.c:78:__unknown_pf(): l4lx | unhandled page fault What is mean? Thank you. cheng

2 1

Re: No mouse and keyboard with the L4Linux/DOpE
by chenggh 16 Nov '06

16 Nov '06

On Thursday 16 November 2006 18:17, Stefan Kalkowski wrote: > On Thursday 16 November 2006 11:03, chenggh wrote: > > Thanks for Helmuth very much. Now my l4dope and l4linux could support > > the keyboard and mouse:) I only modify the grub configuration and it is > > ok. > > what have you done ? Exactly, I also modifed the l4linux kernel configuration with disable mouse, keyboard and anything input. Former my grub menu.lst is like this: ... module (hd0,1)/boot/L4Linux/l4dope --l4io --menubar --transparency module (hd0,1)/boot/L4Linux/loader --fprov=BMODFS linux26.cfg module (hd0,1)/boot/L4Linux/bmodfs module (hd0,1)/boot/L4Linux/vmlinuz26 module (hd0,1)/boot/L4Linux/linux26.cfg module (hd0,1)/boot/L4Linux/libloader.s.so module (hd0,1)/boot/L4Linux/libld-l4.s.so module (hd0,1)/boot/L4Linux/loader --fprov=BMODFS linux26.cfg vbeset 0x117 506070 Now it is like this: module (hd0,1)/boot/L4Linux/l4dope --l4io --menubar --transparency module (hd0,1)/boot/L4Linux/loader --fprov=BMODFS linux26.cfg module (hd0,1)/boot/L4Linux/bmodfs module (hd0,1)/boot/L4Linux/vmlinuz26 module (hd0,1)/boot/L4Linux/linux26.cfg module (hd0,1)/boot/L4Linux/libloader.s.so module (hd0,1)/boot/L4Linux/libld-l4.s.so vbeset 0x117 506070 Thanks for you very much. Basically I could use the L4Linux with graphical user interface. It is very surprising for me. It only use small disk space to boot a grahical application. Later I will publish the l4linux kickstart for the newbie like me to help them to install L4Linux without any mistakes. Best wishes. cheng

1 0

Re: No mouse and keyboard with the L4Linux/DOpE
by chenggh 16 Nov '06

16 Nov '06

On Thursday 16 November 2006 16:55, Christian Helmuth wrote: > Hello chenggh, > > On Thu, Nov 16, 2006 at 07:58:52AM +0800, chenggh wrote: > > If I setup without L4Linux. I could see a graphical interface. But the > > mouse is always at (0,0) and i can't use the mouse anyway. Thanks for Helmuth very much. Now my l4dope and l4linux could support the keyboard and mouse:) I only modify the grub configuration and it is ok. Now I have the new problem. I can't move the mouse out of the l4linux console and it seems that the mouse movement has a range which is the border of l4linux console. And in the attachment there is my l4linux .config file. Please pay attention that my l4linux is 2.6.17 not the latest version 2.6.18. The grub configuration is as following: title L4Linux26/Fiasco+dope kernel (hd0,1)/boot/L4Linux/bootstrap modaddr 0x06000000 module (hd0,1)/boot/L4Linux/main -nowait -nokdb -serial_esc -comspeed 115200 -comport 1 module (hd0,1)/boot/L4Linux/sigma0 module (hd0,1)/boot/L4Linux/roottask task modname "bmodfs" attached 4 modules module (hd0,1)/boot/L4Linux/events module (hd0,1)/boot/L4Linux/names --events module (hd0,1)/boot/L4Linux/log --events module (hd0,1)/boot/L4Linux/dm_phys --isa=0x00800000 -v --events module (hd0,1)/boot/L4Linux/simple_ts -t 300 --events module (hd0,1)/boot/L4Linux/rtc --events module (hd0,1)/boot/L4Linux/l4io --noirq --events module (hd0,1)/boot/L4Linux/l4exec --events module (hd0,1)/boot/L4Linux/l4dope --l4io --menubar --transparency module (hd0,1)/boot/L4Linux/loader --fprov=BMODFS linux26.cfg module (hd0,1)/boot/L4Linux/bmodfs module (hd0,1)/boot/L4Linux/vmlinuz26 module (hd0,1)/boot/L4Linux/linux26.cfg module (hd0,1)/boot/L4Linux/libloader.s.so module (hd0,1)/boot/L4Linux/libld-l4.s.so vbeset 0x117 506070 The minicom log is as following: log | (hd0,1)/boot/L4Linux/log: unrecognized option `--events' log | Unrecognized option: - ? log | Usage: (hd0,1)/boot/L4Linux/log <options>. Option list: log | [ -h | --help ] - this help log | [ -v | --verbose ] - verbose mode log | [ -l | --local ] - flush to local console log | [ -L | --nolocal ] - do not flush to local console log | [ -s | --comport num ] - flush to specified serial interface (0) log | [ -e | --serial-esc ] - enter kdebug on esc on serial log | [ -b | --buffer num ] - buffered mode (0) log | [ --flushprio num ] - priority of flusher thread (0x20) log | [ -p | --prio num ] - priority of main thread (0x20) names | Starting thread listening for `exit' events simplets| Configured for 300 tasks. rtc | Date:16.11.2006 Time:09:34:53 DMphys | DMphys memory map: DMphys | phys. memory 0x00000000-0x1dff0000 (from L4 kernel info page) DMphys | using 0x00100000-0x1dff0000 DMphys | Memory area Pool PS Flags DMphys | 0x00000000-0x00100000 -- -- RESERVED DMphys | 0x00100000-0x00134000 7 12 MAPPED DMphys | 0x00134000-0x001cb000 -- -- DENIED DMphys | 0x001cb000-0x002d0000 7 12 MAPPED DMphys | 0x002d0000-0x002e3000 -- -- DENIED DMphys | 0x002e3000-0x00400000 7 12 MAPPED DMphys | 0x00400000-0x0043a000 -- -- DENIED DMphys | 0x0043a000-0x009e4000 7 12 MAPPED DMphys | 0x009e4000-0x00b80000 0 12 MAPPED DMphys | 0x00b80000-0x00bef000 -- -- DENIED DMphys | 0x00bef000-0x00c00000 0 12 MAPPED DMphys | 0x00c00000-0x01000000 0 22 MAPPED DMphys | 0x01000000-0x01080000 0 12 MAPPED DMphys | 0x01080000-0x0108a000 -- -- DENIED DMphys | 0x0108a000-0x01100000 0 12 MAPPED DMphys | 0x01100000-0x0114b000 -- -- DENIED DMphys | 0x0114b000-0x01220000 0 12 MAPPED DMphys | 0x01220000-0x01256000 -- -- DENIED DMphys | 0x01256000-0x01300000 0 12 MAPPED DMphys | 0x01300000-0x0134d000 -- -- DENIED DMphys | 0x0134d000-0x01400000 0 12 MAPPED DMphys | 0x01400000-0x0141c000 -- -- DENIED DMphys | 0x0141c000-0x01500000 0 12 MAPPED DMphys | 0x01500000-0x0151b000 -- -- RESERVED DMphys | 0x0151b000-0x01540000 0 12 MAPPED DMphys | 0x01540000-0x0154d000 -- -- DENIED DMphys | 0x0154d000-0x01b00000 0 12 MAPPED DMphys | 0x01b00000-0x01b8c000 -- -- DENIED DMphys | 0x01b8c000-0x01c00000 0 12 MAPPED DMphys | 0x01c00000-0x06800000 0 22 MAPPED DMphys | 0x06800000-0x068b8000 0 12 MAPPED DMphys | 0x068b8000-0x077f2000 -- -- DENIED DMphys | 0x077f2000-0x07800000 0 12 MAPPED DMphys | 0x07800000-0x1b800000 0 22 MAPPED DMphys | 0x1b800000-0x1b839000 0 12 MAPPED DMphys | 0x1b839000-0x1dff0000 -- -- DENIED DMphys | DMphys | DMphys memory pools: DMphys | pool 0 (Default memory pool): DMphys | size: 422928KB total, 422928KB free, 32KB reserved DMphys | 0x009e4000-0x00b80000 ( 1648KB, 2MB) DMphys | 0x00bef000-0x01080000 ( 4676KB, 5MB) DMphys | 0x0108a000-0x01100000 ( 472KB, 0MB) DMphys | 0x0114b000-0x01220000 ( 852KB, 1MB) DMphys | 0x01256000-0x01300000 ( 680KB, 1MB) DMphys | 0x0134d000-0x01400000 ( 716KB, 1MB) DMphys | 0x0141c000-0x01500000 ( 912KB, 1MB) DMphys | 0x0151b000-0x01540000 ( 148KB, 0MB) DMphys | 0x0154d000-0x01b00000 ( 5836KB, 6MB) DMphys | 0x01b8c000-0x068b8000 ( 79024KB, 77MB) DMphys | 0x077f2000-0x1b839000 (327964KB, 320MB) DMphys | pool 7 (ISA DMA memory pool): DMphys | size: 8192KB total, 8192KB free, 0KB reserved DMphys | 0x00100000-0x00134000 ( 208KB, 0MB) DMphys | 0x001cb000-0x002d0000 ( 1044KB, 1MB) DMphys | 0x002e3000-0x00400000 ( 1140KB, 1MB) DMphys | 0x0043a000-0x009e4000 ( 5800KB, 6MB) bmodfs | Passed the following modules: bmodfs | module "(hd0,1)/boot/L4Linux/vmlinuz26" (14475kB) bmodfs | module "(hd0,1)/boot/L4Linux/linux26.cfg" (1kB) bmodfs | module "(hd0,1)/boot/L4Linux/libloader.s.so" (635kB) bmodfs | module "(hd0,1)/boot/L4Linux/libld-l4.s.so" (473kB) io | do_args(): Disabling internal IRQ handling. io | do_args(): Enabling events support. io | CPU supports 8 MTRRs. Allocated: io | 0: 00000000-20000000 ( 512MB) type WB io | 1: 1e000000-20000000 ( 32MB) type UC io | 2: e8000000-ec000000 ( 64MB) type WC io | 3: e8000000-ec000000 ( 64MB) type WC l4dope | DOpE(init): using L4 IO server l4dope | (hd0,1)/boot/L4Linux/l4dope: unrecognized option `--menubar' l4dope | DOpE(init): unknown option! l4dope | DOpE(init): using transparency loader | vmlinuz26: Starting application using libld-l4.s.so loader | vmlinuz26,#10: Loading binary io | PCI: Using configuration type 1 io | PCI: Probing PCI hardware io | PCI: Probing PCI hardware (bus 00) io | PCI: Via IRQ fixup io | 00000000-ffffffff : PCI mem io | e0000000-e7ffffff : PCI Bus #01 io | e0000000-e7ffffff : S3 Inc. VT8375 [ProSavage8 KM266/KL266] io | e8000000-ebffffff : VIA Technologies, Inc. VT8375 [KM266/KL266] Hos io : t Bridge io | ec000000-ec0fffff : PCI Bus #01 io | ec000000-ec07ffff : S3 Inc. VT8375 [ProSavage8 KM266/KL266] io | ec100000-ec1000ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/ io : 8139C+ io | ec101000-ec1017ff : VIA Technologies, Inc. IEEE 1394 Host Controlle io : r io | ec102000-ec1020ff : VIA Technologies, Inc. USB 2.0 io | 0000-ffff : PCI IO io | 0cf8-0cff : PCI conf1 io | d000-d0ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ io | d400-d47f : VIA Technologies, Inc. IEEE 1394 Host Controller io | d800-d81f : VIA Technologies, Inc. USB io | dc00-dc1f : VIA Technologies, Inc. USB (#2) io | e000-e01f : VIA Technologies, Inc. USB (#3) io | e400-e40f : VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/ io : A/C PIPC Bus Master IDE io | e800-e8ff : VIA Technologies, Inc. VT8233/A/8235 AC97 Audio Control io : ler loader | vmlinuz26,#10: Loading ldso loader | vmlinuz26,#10: Starting libld-l4.s.so at 00013870 via 0000bc54 l4dope | L4INPUT: !!! W A R N I N G !!! l4dope | L4INPUT: Please, do not use Fiasco's "-esc" with L4INPUT. l4dope | L4INPUT: !!! W A R N I N G !!! l4dope | serio: i8042 AUX port at 0x60,0x64 irq 12 l4dope | serio: i8042 KBD port at 0x60,0x64 irq 1 l4dope | input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 l4lx | ======> L4Linux 2.6 starting... <======== l4lx | Linux version 2.6.17-l4 (root@fiasco-desktop) (gcc version 3.4.6 (Ubu l4lx : ntu 3.4.6-1ubuntu2)) #4 Wed Nov 15 22:47:04 CST 2006 l4lx | Binary name: vmlinuz26 l4lx | Kernel command line (4 args): earlyprintk=yes mem=256M video=l4fb roo l4lx : t=/dev/hda2 l4lx | Image: 00400000 - 0072e000 [3256 KiB]. l4lx | Areas: Text: 00400000 - 00642000 [2312kB] (a bit longer) l4lx | Data: 00642000 - 0068bd8c [295kB] l4lx | Initdata: 0068e000 - 006bf000 [196kB] l4lx | BSS: 006c0000 - 0072c930 [434kB] l4lx | l4lx_thread_create: Created thread 10.03 (tamer) l4lx | Using tamed mode. l4lx | l4env_linux_startup thread 4. l4lx | l4lx_thread_create: Created thread 10.04 (server) l4lx | main thread will be 10.04 l4lx | l4env_register_pointer_section: addr = 00642000 size = 512000 l4lx | sec-w-init: virt: 0x00642000 to 0x006befff [500 KiB] l4lx | Noncontiguous region for sec-w-init l4lx | sec-w-init: Number of physical regions: 2, 512000 Bytes l4lx | sec-w-init: 1: Phys: 0x0141c000 to 0x01488000, Size: 442368 l4lx | sec-w-init: 2: Phys: 0x0120f000 to 0x01220000, Size: 69632 l4lx | main thread: received startup message. l4lx | Main thread running, waiting... l4lx | setup_l4env_memory: Forcing superpages for main memory l4lx | Main memory size: 256MB l4lx | Got 2048kB of ISA DMA memory. l4lx | ISA DMA memory: virt: 0x00800000 to 0x009fffff [2048 KiB] l4lx | ISA DMA memory: Number of physical regions: 1, 2097152 Bytes l4lx | ISA DMA memory: 1: Phys: 0x0043a000 to 0x0063a000, Size: 2097152 l4lx | Main memory: virt: 0x00c00000 to 0x10bfffff [262144 KiB] l4lx | Main memory: Number of physical regions: 1, 268435456 Bytes l4lx | Main memory: 1: Phys: 0x07800000 to 0x17800000, Size: 268435456 l4lx | Filling lower ptabs... l4lx | Done (1614 entries). l4lx | l4lx_thread_create: Created thread 10.05 (timer.i0) l4lx | l4lx_thread_create: Created thread 10.06 (Idler) l4dope | input: AT Translated Set 2 keyboard on isa0060/serio0 l4dope | input: PC Speaker l4dope | input: L4 input event injector l4dope | L4 input event injector: IRQ handler up l4dope | connect "ImPS/2 Generic Wheel Mouse", isa0060/serio1/input0 l4dope | connect "AT Translated Set 2 keyboard", isa0060/serio0/input0 l4dope | connect "PC Speaker", isa0061/input0 l4dope | connect "L4 input event injector", l4/sys l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=60, size=800 l4dope | SharedMem(get_adr): address = 6000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=61, size=800 l4dope | SharedMem(get_adr): address = 7000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=62, size=800 l4dope | SharedMem(get_adr): address = d000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=63, size=800 l4dope | SharedMem(get_adr): address = e000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=64, size=800 l4dope | SharedMem(get_adr): address = f000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=66, size=800 l4dope | SharedMem(get_adr): address = 16000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=67, size=800 l4dope | SharedMem(get_adr): address = 17000 l4dope | dope: addr=e0000000 size=31680KiB io | Remapping I/O memory e0000000-e1ef0000 cached io | Setting MTRR 4 to e0000000-e2000000 type WC l4dope | Mapped video memory at e0000000 to 04000000+000000 [31680kB] via L4IO l4dope | mapping: vaddr=0x4000000 size=32440320(0x1ef0000) offset=0(0x0) l4dope | Frame buffer base: 0x4000000 l4dope | Resolution: 1024x768x16 l4dope | Bytes per scanline: 2048 l4dope | Current video mode is 1024x768 red=11:5 green=5:6 blue=0:5 res=0:0 l4lx | Starting L4FB via DOpE l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=75, size=96000 l4dope | SharedMem(get_adr): address = 400000 l4lx | l4lx_thread_create: Created thread 10.08 (DOpE refresher) l4lx | l4lx_thread_create: Created thread 10.09 (L4DOpEinput) l4lx | l4lx_thread_create: Created thread 10.0a (IRQ17) l4lx | l4lx_thread_create: Created thread 10.0b (IRQ16) l4lx | l4lx_thread_create: Created thread 10.0c (IRQ15) l4lx | l4lx_thread_create: Created thread 10.0d (IRQ14) l4lx | l4lx_thread_create: Created thread 10.0e (IRQ13) l4lx | l4lx_thread_create: Created thread 10.0f (IRQ11) l4lx | l4lx_thread_create: Created thread 10.10 (IRQ10) l4lx | l4lx_thread_create: Created thread 10.11 (IRQ9) l4lx | l4lx_thread_create: Created thread 10.12 (IRQ8) l4lx | l4lx_thread_create: Created thread 10.13 (IRQ7) l4lx | l4lx_thread_create: Created thread 10.14 (IRQ6) l4lx | l4lx_thread_create: Created thread 10.15 (IRQ5) l4lx | l4lx_thread_create: Created thread 10.16 (IRQ3) l4dope | psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, l4dope : throwing 3 bytes away. l4dope | psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, l4dope : throwing 3 bytes away. Thank you. cheng

2 1

No mouse and keyboard with the L4Linux/DOpE
by chenggh 16 Nov '06

16 Nov '06

Hi: Now I boot the l4dope but I can't use the keyboard and mouse. In the l4linux console I could see the cursor flases and the mouse stayes in the at (0,0). But i can't input anyth character and I can't move the mouse. I have checked the former mailists. And adam said we couldn't use the usb mouse and keyboard. Now in my system I use the ps/2 mouse and ps/2 keyboard. And when I push the NumLock key and the light couldn't be on, it is off alyways. So i think the keyboard is dead and have nothing reponsing. In the L4/Fiasco booting process there are some warnings like this: bmodfs | Passed the following modules: bmodfs | module "(hd0,1)/boot/L4Linux/vmlinuz26" (14716kB) bmodfs | module "(hd0,1)/boot/L4Linux/linux26.cfg" (1kB) bmodfs | module "(hd0,1)/boot/L4Linux/libloader.s.so" (635kB) bmodfs | module "(hd0,1)/boot/L4Linux/libld-l4.s.so" (473kB) bmodfs | module "(hd0,1)/boot/L4Linux/loader --fprov=BMODFS linux26.cfg" (84 bmodfs : 4kB) l 4dope | L4INPUT: !!! W A R N I N G !!! l4dope | L4INPUT: Please, do not use Fiasco's "-esc" with L4INPUT. 4dope | L4INPUT: !!! W A R N I N G !!! loader | vmlinuz26: Starting application using libld-l4.s.so My grub configuration is as following: title L4Linux26/Fiasco+dope kernel (hd0,1)/boot/L4Linux/bootstrap modaddr 0x03000000 module (hd0,1)/boot/L4Linux/main -nowait -nokdb -serial_esc -comspeed 115200 -comport 1 module (hd0,1)/boot/L4Linux/sigma0 module (hd0,1)/boot/L4Linux/roottask task modname "bmodfs" attached 5 modules module (hd0,1)/boot/L4Linux/events module (hd0,1)/boot/L4Linux/names -events module (hd0,1)/boot/L4Linux/log module (hd0,1)/boot/L4Linux/dm_phys --isa=0x00800000 -v --events module (hd0,1)/boot/L4Linux/simple_ts -t 300 --events module (hd0,1)/boot/L4Linux/rtc --events module (hd0,1)/boot/L4Linux/l4io -noirq --events module (hd0,1)/boot/L4Linux/l4exec --events module (hd0,1)/boot/L4Linux/l4dope -l4io --menubar --transparency module (hd0,1)/boot/L4Linux/loader --fprov BMODFS linux26.cfg module (hd0,1)/boot/L4Linux/bmodfs module (hd0,1)/boot/L4Linux/vmlinuz26 module (hd0,1)/boot/L4Linux/linux26.cfg module (hd0,1)/boot/L4Linux/libloader.s.so module (hd0,1)/boot/L4Linux/libld-l4.s.so module (hd0,1)/boot/L4Linux/loader --fprov=BMODFS linux26.cfg vbeset 0x117 506070 Thank you. cheng

3 2

Re: No mouse and keyboard with the L4Linux/DOpE
by Christian Helmuth 16 Nov '06

16 Nov '06

Hello chenggh, On Thu, Nov 16, 2006 at 07:58:52AM +0800, chenggh wrote: > If I setup without L4Linux. I could see a graphical interface. But the mouse > is always at (0,0) and i can't use the mouse anyway. [...] > The minicom log is like this: [...] > l4lx | ======> L4Linux 2.6 starting... <======== No offense meant, but are you kidding? Please, send the log _without_ starting L4Linux. Thanks -- Christian Helmuth TU Dresden, Dept. of CS Operating Systems Group http://os.inf.tu-dresden.de/~ch12

1 0

Re: No mouse and keyboard with the L4Linux/DOpE
by chenggh 16 Nov '06

16 Nov '06

On Thursday 16 November 2006 07:05, Adam Lackorzynski wrote: > On Wed Nov 15, 2006 at 20:55:00 +0800, chenggh wrote: > > On Wednesday 15 November 2006 20:18, chenggh wrote: > > > On Wednesday 15 November 2006 18:20, Christian Helmuth wrote: > > > > Hi, > > > > Here is my L4Linux booting log, Please look at it to help me. thank you. > > First, please try to do what Christian suggested: Try your setup > _without_ L4Linux, this helps to identify if L4Linux is the culprit or > not. If I setup without L4Linux. I could see a graphical interface. But the mouse is always at (0,0) and i can't use the mouse anyway. > Second thing, if you do not see any more output from Linux in the > log (via serial or in the terminal you run Fiasco-UX in) and your > output device (e.g. framebuffer) does not come up for some reason, like > in your current example, enable CONFIG_L4_SERIAL and > CONFIG_L4_SERIAL_CONSOLE. Then add console=ttyLv0 to your kernel command > line. With this Linux should print the boot up in minicom or xterm > (Fiasco-UX). The minicom log is like this: l4dope | DOpE(init): using L4 IO server l4dope | (hd0,1)/boot/L4Linux/l4dope: unrecognized option `--menubar' l4dope | DOpE(init): unknown option! l4dope | DOpE(init): using transparency loader | vmlinuz26: Starting application using libld-l4.s.so loader | vmlinuz26,#10: Loading binary loader | vmlinuz26,#10: Loading ldso loader | vmlinuz26,#10: Starting libld-l4.s.so at 00013870 via 0000bc54 io | PCI: Using configuration type 1 io | PCI: Probing PCI hardware io | PCI: Probing PCI hardware (bus 00) io | PCI: Via IRQ fixup io | 00000000-ffffffff : PCI mem io | e0000000-e7ffffff : PCI Bus #01 io | e0000000-e7ffffff : S3 Inc. VT8375 [ProSavage8 KM266/KL266] io | e8000000-ebffffff : VIA Technologies, Inc. VT8375 [KM266/KL266] Hos io : t Bridge io | ec000000-ec0fffff : PCI Bus #01 io | ec000000-ec07ffff : S3 Inc. VT8375 [ProSavage8 KM266/KL266] io | ec100000-ec1000ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/ io : 8139C+ io | ec101000-ec1017ff : VIA Technologies, Inc. IEEE 1394 Host Controlle io : r io | ec102000-ec1020ff : VIA Technologies, Inc. USB 2.0 io | 0000-ffff : PCI IO io | 0cf8-0cff : PCI conf1 io | d000-d0ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ io | d400-d47f : VIA Technologies, Inc. IEEE 1394 Host Controller io | d800-d81f : VIA Technologies, Inc. USB io | dc00-dc1f : VIA Technologies, Inc. USB (#2) io | e000-e01f : VIA Technologies, Inc. USB (#3) io | e400-e40f : VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/ io : A/C PIPC Bus Master IDE io | e800-e8ff : VIA Technologies, Inc. VT8233/A/8235 AC97 Audio Control io : ler l4dope | L4INPUT: !!! W A R N I N G !!! l4dope | L4INPUT: Please, do not use Fiasco's "-esc" with L4INPUT. l4dope | L4INPUT: !!! W A R N I N G !!! l4dope | serio: i8042 AUX port at 0x60,0x64 irq 12 l4dope | serio: i8042 KBD port at 0x60,0x64 irq 1 l4dope | input: AT Translated Set 2 keyboard on isa0060/serio0 l4dope | input: PC Speaker l4dope | input: L4 input event injector l4dope | L4 input event injector: IRQ handler up l4dope | connect "AT Translated Set 2 keyboard", isa0060/serio0/input0 l4dope | connect "PC Speaker", isa0061/input0 l4dope | connect "L4 input event injector", l4/sys l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=4d, size=800 l4dope | SharedMem(get_adr): address = 5000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=4e, size=800 l4dope | SharedMem(get_adr): address = 6000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=4f, size=800 l4dope | SharedMem(get_adr): address = 7000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=50, size=800 l4dope | SharedMem(get_adr): address = d000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=51, size=800 l4dope | SharedMem(get_adr): address = e000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=53, size=800 l4dope | SharedMem(get_adr): address = 15000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=54, size=800 l4dope | SharedMem(get_adr): address = 16000 l4dope | dope: addr=e0000000 size=31680KiB io | Remapping I/O memory e0000000-e1ef0000 cached io | Setting MTRR 4 to e0000000-e2000000 type WC l4dope | Mapped video memory at e0000000 to 04000000+000000 [31680kB] via L4IO l4dope | mapping: vaddr=0x4000000 size=32440320(0x1ef0000) offset=0(0x0) l4dope | Frame buffer base: 0x4000000 l4dope | Resolution: 1024x768x16 l4dope | Bytes per scanline: 2048 l4dope | Current video mode is 1024x768 red=11:5 green=5:6 blue=0:5 res=0:0 l4lx | ======> L4Linux 2.6 starting... <======== l4lx | Linux version 2.6.17-l4 (root@fiasco-desktop) (gcc version 3.4.6 (Ubu l4lx : ntu 3.4.6-1ubuntu2)) #3 Wed Nov 15 12:19:04 CST 2006 l4lx | Binary name: vmlinuz26 l4lx | Kernel command line (4 args): earlyprintk=yes mem=256M video=l4fb roo l4lx : t=/dev/hda2 l4lx | Image: 00400000 - 0073e000 [3320 KiB]. l4lx | Areas: Text: 00400000 - 0064e000 [2360kB] (a bit longer) l4lx | Data: 0064e000 - 0069ad8c [307kB] l4lx | Initdata: 0069e000 - 006d0000 [200kB] l4lx | BSS: 006d0000 - 0073cb30 [434kB] l4lx | l4lx_thread_create: Created thread 10.03 (tamer) l4lx | Using tamed mode. l4lx | l4env_linux_startup thread 4. l4lx | l4lx_thread_create: Created thread 10.04 (server) l4lx | main thread will be 10.04 l4lx | l4env_register_pointer_section: addr = 0069c000 size = 663552 l4lx | sec-w-init: virt: 0x0069c000 to 0x0073dfff [648 KiB] l4lx | sec-w-init: Number of physical regions: 1, 663552 Bytes l4lx | sec-w-init: 1: Phys: 0x0145b000 to 0x014fd000, Size: 663552 l4lx | main thread: received startup message. l4lx | Main thread running, waiting... l4lx | setup_l4env_memory: Forcing superpages for main memory l4lx | Main memory size: 256MB l4lx | Got 2048kB of ISA DMA memory. l4lx | ISA DMA memory: virt: 0x00800000 to 0x009fffff [2048 KiB] l4lx | ISA DMA memory: Number of physical regions: 1, 2097152 Bytes l4lx | ISA DMA memory: 1: Phys: 0x0043a000 to 0x0063a000, Size: 2097152 l4lx | Main memory: virt: 0x00c00000 to 0x10bfffff [262144 KiB] l4lx | Main memory: Number of physical regions: 1, 268435456 Bytes l4lx | Main memory: 1: Phys: 0x0b800000 to 0x1b800000, Size: 268435456 l4lx | Filling lower ptabs... l4lx | Done (1598 entries). l4lx | l4lx_thread_create: Created thread 10.05 (timer.i0) l4lx | l4lx_thread_create: Created thread 10.06 (Idler) l4lx | Starting L4FB via DOpE l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=75, size=96000 l4dope | SharedMem(get_adr): address = 400000 l4lx | l4lx_thread_create: Created thread 10.08 (DOpE refresher) l4lx | l4lx_thread_create: Created thread 10.09 (L4DOpEinput) l4lx | l4lx_thread_create: Created thread 10.0a (IRQ17) l4lx | l4lx_thread_create: Created thread 10.0b (IRQ16) l4lx | l4lx_thread_create: Created thread 10.0c (IRQ15) l4lx | l4lx_thread_create: Created thread 10.0d (IRQ14) l4lx | l4lx_thread_create: Created thread 10.0e (IRQ13) l4lx | l4lx_thread_create: Created thread 10.0f (IRQ11) l4lx | l4lx_thread_create: Created thread 10.10 (IRQ10) l4lx | l4lx_thread_create: Created thread 10.11 (IRQ9) l4lx | l4lx_thread_create: Created thread 10.12 (IRQ8) l4lx | l4lx_thread_create: Created thread 10.13 (IRQ7) l4lx | l4lx_thread_create: Created thread 10.14 (IRQ6) l4lx | l4lx_thread_create: Created thread 10.15 (IRQ5) l4lx | l4lx_thread_create: Created thread 10.16 (IRQ3) It is end. cheng

1 0

Timing problem on mem_fpage_unmap() in the fiasco kernel
by WanKeun Jo 16 Nov '06

16 Nov '06

Hi, I've been working on porting DROPS to Bulverde board - PXA270. My senior already made DROPS work on OMAP board before. He worked with L4Linux-2.6.16, but I don't know exact version of fiasco kernel and L4Env packages because they are not specified. I got all the sources from my senior - not the latest things.. - and have tried them work on Bulverde board. My status is that I have an unsolvable error in fiasco kernel. On L4Linux-2.6.16's booting process, one step is "Freeing INITRD", and system halted on that point. By tracing codes, I got to know while the mem_fpage_unmap() function in l4/kernel/fiasco/src/kern/map_util.cpp executed, the system halted. And I put "delay codes" into that function's for() {}, and then the system continued to execute and boot succeed. I found this fact after I added printf() into that code in order to debug. On that point - "Freeing INITRD", whether the boot process goes next step or not depends on how much delay time is put on that code, mem_fpage_unmap(). If I make the delay time a little bit longer, then the system goes to next step at that point, but stops somewhere else after that. If I make the delay time too short, the system never go to next step. And the mem_fpage_unmap() is called a lot while the system works, but only in the "Freeing INITRD" part, the problem appears. I think this is a serious timing error, but I can't know what the problem is. I already tried all the combinations of kernel and L4Linux options before. when I tried to install the latest kernel and l4linux-2.6.18, the halting problem didn't appear. And I found that the latest kernel's mem_fpage_unmap() functions implementation has a lot of changes compared to the kernel I work with. Could you help me solve this problem?? Please don't say to me "use the latest one".. My senior already succeed on OMAP board with the old versions. Thank you.

3 2

Re: No mouse and keyboard with the L4Linux/DOpE
by Adam Lackorzynski 16 Nov '06

16 Nov '06

On Wed Nov 15, 2006 at 20:55:00 +0800, chenggh wrote: > On Wednesday 15 November 2006 20:18, chenggh wrote: > > On Wednesday 15 November 2006 18:20, Christian Helmuth wrote: > > > Hi, > > > > Here is my L4Linux booting log, Please look at it to help me. thank you. First, please try to do what Christian suggested: Try your setup _without_ L4Linux, this helps to identify if L4Linux is the culprit or not. Second thing, if you do not see any more output from Linux in the log (via serial or in the terminal you run Fiasco-UX in) and your output device (e.g. framebuffer) does not come up for some reason, like in your current example, enable CONFIG_L4_SERIAL and CONFIG_L4_SERIAL_CONSOLE. Then add console=ttyLv0 to your kernel command line. With this Linux should print the boot up in minicom or xterm (Fiasco-UX). Adam -- Adam adam(a)os.inf.tu-dresden.de Lackorzynski http://os.inf.tu-dresden.de/~adam/

1 0

Re: No mouse and keyboard with the L4Linux/DOpE
by chenggh 15 Nov '06

15 Nov '06

On Wednesday 15 November 2006 20:18, chenggh wrote: > On Wednesday 15 November 2006 18:20, Christian Helmuth wrote: > > Hi, > > Here is my L4Linux booting log, Please look at it to help me. thank you. l4dope | DOpE(init): using L4 IO server l4dope | (hd0,1)/boot/L4Linux/l4dope: unrecognized option `--menubar' l4dope | DOpE(init): unknown option! l4dope | DOpE(init): using transparency loader | vmlinuz26: Starting application using libld-l4.s.so loader | vmlinuz26,#10: Loading binary loader | vmlinuz26,#10: Loading ldso loader | vmlinuz26,#10: Starting libld-l4.s.so at 00013870 via 0000bc54 io | PCI: Using configuration type 1 io | PCI: Probing PCI hardware io | PCI: Probing PCI hardware (bus 00) io | PCI: Via IRQ fixup io | 00000000-ffffffff : PCI mem io | e0000000-e7ffffff : PCI Bus #01 io | e0000000-e7ffffff : S3 Inc. VT8375 [ProSavage8 KM266/KL266] io | e8000000-ebffffff : VIA Technologies, Inc. VT8375 [KM266/KL266] Hos io : t Bridge io | ec000000-ec0fffff : PCI Bus #01 io | ec000000-ec07ffff : S3 Inc. VT8375 [ProSavage8 KM266/KL266] io | ec100000-ec1000ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/ io : 8139C+ io | ec101000-ec1017ff : VIA Technologies, Inc. IEEE 1394 Host Controlle io : r io | ec102000-ec1020ff : VIA Technologies, Inc. USB 2.0 io | 0000-ffff : PCI IO io | 0cf8-0cff : PCI conf1 io | d000-d0ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ io | d400-d47f : VIA Technologies, Inc. IEEE 1394 Host Controller io | d800-d81f : VIA Technologies, Inc. USB io | dc00-dc1f : VIA Technologies, Inc. USB (#2) io | e000-e01f : VIA Technologies, Inc. USB (#3) io | e400-e40f : VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/ io : A/C PIPC Bus Master IDE io | e800-e8ff : VIA Technologies, Inc. VT8233/A/8235 AC97 Audio Control io : ler l4dope | L4INPUT: !!! W A R N I N G !!! l4dope | L4INPUT: Please, do not use Fiasco's "-esc" with L4INPUT. l4dope | L4INPUT: !!! W A R N I N G !!! l4dope | serio: i8042 AUX port at 0x60,0x64 irq 12 l4dope | serio: i8042 KBD port at 0x60,0x64 irq 1 l4dope | input: AT Translated Set 2 keyboard on isa0060/serio0 l4dope | input: PC Speaker l4dope | input: L4 input event injector l4dope | L4 input event injector: IRQ handler up l4dope | connect "AT Translated Set 2 keyboard", isa0060/serio0/input0 l4dope | connect "PC Speaker", isa0061/input0 l4dope | connect "L4 input event injector", l4/sys l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=4d, size=800 l4dope | SharedMem(get_adr): address = 5000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=4e, size=800 l4dope | SharedMem(get_adr): address = 6000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=4f, size=800 l4dope | SharedMem(get_adr): address = 7000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=50, size=800 l4dope | SharedMem(get_adr): address = d000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=51, size=800 l4dope | SharedMem(get_adr): address = e000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=53, size=800 l4dope | SharedMem(get_adr): address = 15000 l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=54, size=800 l4dope | SharedMem(get_adr): address = 16000 l4dope | dope: addr=e0000000 size=31680KiB io | Remapping I/O memory e0000000-e1ef0000 cached io | Setting MTRR 4 to e0000000-e2000000 type WC l4dope | Mapped video memory at e0000000 to 04000000+000000 [31680kB] via L4IO l4dope | mapping: vaddr=0x4000000 size=32440320(0x1ef0000) offset=0(0x0) l4dope | Frame buffer base: 0x4000000 l4dope | Resolution: 1024x768x16 l4dope | Bytes per scanline: 2048 l4dope | Current video mode is 1024x768 red=11:5 green=5:6 blue=0:5 res=0:0 l4lx | ======> L4Linux 2.6 starting... <======== l4lx | Linux version 2.6.17-l4 (root@fiasco-desktop) (gcc version 3.4.6 (Ubu l4lx : ntu 3.4.6-1ubuntu2)) #3 Wed Nov 15 12:19:04 CST 2006 l4lx | Binary name: vmlinuz26 l4lx | Kernel command line (4 args): earlyprintk=yes mem=256M video=l4fb roo l4lx : t=/dev/hda2 l4lx | Image: 00400000 - 0073e000 [3320 KiB]. l4lx | Areas: Text: 00400000 - 0064e000 [2360kB] (a bit longer) l4lx | Data: 0064e000 - 0069ad8c [307kB] l4lx | Initdata: 0069e000 - 006d0000 [200kB] l4lx | BSS: 006d0000 - 0073cb30 [434kB] l4lx | l4lx_thread_create: Created thread 10.03 (tamer) l4lx | Using tamed mode. l4lx | l4env_linux_startup thread 4. l4lx | l4lx_thread_create: Created thread 10.04 (server) l4lx | main thread will be 10.04 l4lx | l4env_register_pointer_section: addr = 0069c000 size = 663552 l4lx | sec-w-init: virt: 0x0069c000 to 0x0073dfff [648 KiB] l4lx | sec-w-init: Number of physical regions: 1, 663552 Bytes l4lx | sec-w-init: 1: Phys: 0x0145b000 to 0x014fd000, Size: 663552 l4lx | main thread: received startup message. l4lx | Main thread running, waiting... l4lx | setup_l4env_memory: Forcing superpages for main memory l4lx | Main memory size: 256MB l4lx | Got 2048kB of ISA DMA memory. l4lx | ISA DMA memory: virt: 0x00800000 to 0x009fffff [2048 KiB] l4lx | ISA DMA memory: Number of physical regions: 1, 2097152 Bytes l4lx | ISA DMA memory: 1: Phys: 0x0043a000 to 0x0063a000, Size: 2097152 l4lx | Main memory: virt: 0x00c00000 to 0x10bfffff [262144 KiB] l4lx | Main memory: Number of physical regions: 1, 268435456 Bytes l4lx | Main memory: 1: Phys: 0x0b800000 to 0x1b800000, Size: 268435456 l4lx | Filling lower ptabs... l4lx | Done (1598 entries). l4lx | l4lx_thread_create: Created thread 10.05 (timer.i0) l4lx | l4lx_thread_create: Created thread 10.06 (Idler) l4lx | Starting L4FB via DOpE l4dope | SharedMem(alloc): hl.low=100000, lh.high=80000, id=75, size=96000 l4dope | SharedMem(get_adr): address = 400000 l4lx | l4lx_thread_create: Created thread 10.08 (DOpE refresher) l4lx | l4lx_thread_create: Created thread 10.09 (L4DOpEinput) l4lx | l4lx_thread_create: Created thread 10.0a (IRQ17) l4lx | l4lx_thread_create: Created thread 10.0b (IRQ16) l4lx | l4lx_thread_create: Created thread 10.0c (IRQ15) l4lx | l4lx_thread_create: Created thread 10.0d (IRQ14) l4lx | l4lx_thread_create: Created thread 10.0e (IRQ13) l4lx | l4lx_thread_create: Created thread 10.0f (IRQ11) l4lx | l4lx_thread_create: Created thread 10.10 (IRQ10) l4lx | l4lx_thread_create: Created thread 10.11 (IRQ9) l4lx | l4lx_thread_create: Created thread 10.12 (IRQ8) l4lx | l4lx_thread_create: Created thread 10.13 (IRQ7) l4lx | l4lx_thread_create: Created thread 10.14 (IRQ6) l4lx | l4lx_thread_create: Created thread 10.15 (IRQ5) l4lx | l4lx_thread_create: Created thread 10.16 (IRQ3) It is end. cheng

1 0