l4-hackers December 2006

l4-hackers@os.inf.tu-dresden.de

24 participants
30 discussions

Re: 答复: ×a・￠ : segment fault for fiasco-ux
by halo duan 21 Dec '06

21 Dec '06

>Hi, >On Wed Dec 20, 2006 at 14:00:26 +0800, halo.duan wrote: >> and I check the host linux configuration. the page offset is >> CONFIG_PAGE_OFFSET=0xC0000000 which is correct as your >> suggestion.I guss that fiasco-ux must be failed to interpret ELF >> of sigma0/roottask/irq0 and execute it . I put the same "hello" >> bin in grub/ fiasco environment. it works fun. JDB does not help >> me becuase that fiasco-ux enter a stage that CRTL-C does not >> work, I can not bring the system to jdb stage with CRTL-C. ps >> can find three processes which are 'fiasco-ux,[I][irq0] and >> [fiasco-ux]. I can use strace for fiasco-ux and [i][irq0]. but >> failed to trace [fiasco-ux]. >Thats correct, as the fiasco-ux is already ptracing the [fiasco-ux] >binary. I think you haven't shown us the full log of the segfault and >the text before yet, so please post it. We should be able to see more >when we see the log. >Adam following is my screen copy of fisco-ux. it's freezed there. I can not use CTRL-C to bring up the jdb. [root@athena l4]# ./fiasco-ux -l hello Fiasco-UX on Linux 2.6.15-1.2054_FC5 (i686) Mapped 64 MB Memory + 0 KB Framebuffer + 0 MB Input Area on FD 3 Loading Module 0x00090000-0x00099380 [sigma0] Loading Module 0x00120000-0x002b09e4 [roottask] Copying Module 0x039bb000-0x039e0d4e [hello] Bootstrapping... Welcome to Fiasco(ux)! DD-L4(v2)/x86 microkernel (C) 1998-2006 TU Dresden Rev: Fri Dec 8 18:40:04 2006 compiled with gcc 4.1.0 for Intel Pentium III CPU: GenuineIntel (6:8:3:2) Model: Pentium III (Coppermine) at 797 MHz 32 Entry I TLB (4K pages) 2 Entry I TLB (4M pages) 64 Entry D TLB (4K pages) 8 Entry D TLB (4M pages) 16 KB L1 I Cache (4-way associative, 32 bytes per line) 16 KB L1 D Cache (4-way associative, 32 bytes per line) 256 KB L2 U Cache (8-way associative, 32 bytes per line) Freeing init code/data: 28672 bytes (7 pages) Calibrating timer loop... done. ^^^^^^ freezed to above ps shows there are three related process 1955 pts/0 R+ 2:18 ./fiasco-ux -l hello 1956 pts/0 S+ 0:00 [I](irq0) 1957 pts/0 T+ 0:00 [fiasco-ux] strace shows segment fault, i think it's normal for execute "CLI" in userland .

3 2

hiworld example
by Shakthi Kannan 20 Dec '06

20 Dec '06

Hi, After checking out hello, l4/pkg/generic_ts, l4/pkg/cxx, l4/kernel/fiasco, l4/tool/preprocess from CVS and doing: make -C l4 O=build oldconfig cd l4 make O=build stops at: l4/pkg/generic_ts/lib/clientlib/server.c:16:26: error: l4/log/l4log.h: No such file or directory l4/pkg/generic_ts/lib/clientlib/server.c:17:26: error: l4/env/errno.h: No such file or directory l4/pkg/generic_ts/lib/clientlib/server.c:18:31: error: l4/names/libnames.h: No such file or directory What do I need to checkout for log, env and names? System is x86 running Ubuntu Dapper with make-3.81-2. Is there a complete tarball that contains the entire sources - L4env, fiasco, L4Linux, and others, that I can simply download and build, rather than having to check-out individual modules from CVS? Thanks, SK -- Shakthi Kannan http://www.shakthimaan.com __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

5 8

AW: L4Linux on L4Ka::Pistachio
by Christian, Martin, OPEE45 20 Dec '06

20 Dec '06

Hi Adam! >> a) Is the L4Env required for running L4Linux? > Yes but that's no strict requirement. How much time would it probably take, to adjust L4Linux without L4Env to the L4 Interface of Pistachio? Did anybody try this? >> This is part of my "Diplomarbeit" at the University of Leipzig. > That isn't too far away from here. Well, actually I'm in Friedrichshafen with EADS to write my thesis. But I'm studying at the University of Leipzig. >> b) How much time would it take to port L4Env to L4Ka::Pistachio? > It would probably take me a month or two That's definitely more time, than I've got left. I also assume you know L4Env much better than I do, so it would take me even longer. >> d) What about the Fiasco port to PowerPC from Mathias Lange? > This didn't come to an end. That's a pity! :-( >> e) If Fiasco would be running on PowerPC, would it be possible >> to run L4Linux without changes? > If one wants to have binary compatibility then some PPC code needs > to be there. And then that would not be the way I'm currently doing > things. As far as I understood Michael Hohmuths Diplomarbeit, all Hardware access from Linux is replaced by sycalls to L4. Is that still the case? And so far only the IA32 part of Linux is changed that way, isn't it? So I would basically need to rewrite the PowerPC architecture part of Linux, basically. Isn't it the way things are supposed to be done? > Yes, L4Linux-2.4 also runs in Pistachio, at least it did when we worked > on it. It's all in the l4ka CVS. I'll try it. :-) > I suppose support on this is basically non-existent. L4Ka::Pistachio for PowerPC is also not really supported, so I'm used to not getting support! :-( Thanks, Martin.

3 2

L4linux compile errors..
by Wankeun Jo 20 Dec '06

20 Dec '06

Hi, I use L4Linux-2.6.18 version on pxa255 board. l4linux boots well and then now tried to expand my work for device drivers. I compiled dice and dm_generic, dm_phys packages as well. I want to use the file in "l4linux/arch/arm/mach-pxa/*", so I add the files to be compiled in "l4linux-2.6/arch/l4/Makefile" And I link all the files of "include/asm-arm/arch-pxa/*.h" in "asm-l4/arch-arm/arch" for use. And then I tried to compile l4linux, but failed with the following messages --------------- CHK include/linux/version.h CHK include/linux/utsrelease.h CC arch/l4/kernel/asm-offsets.s In file included from include/linux/sched.h:49, from arch/l4/kernel/asm-offsets.c:93: include/linux/jiffies.h:211:31: missing binary operator before token "#" In file included from include/linux/sched.h:49, from arch/l4/kernel/asm-offsets.c:93: include/linux/jiffies.h: In function `timespec_to_jiffies': include/linux/jiffies.h:316: error: syntax error at '#' token include/linux/jiffies.h:316: error: parse error before "Current" include/linux/jiffies.h:316: error: syntax error at '#' token include/linux/jiffies.h:316: error: parse error before "Current" include/linux/jiffies.h:316: error: syntax error at '#' token include/linux/jiffies.h:316: error: parse error before "Current" include/linux/jiffies.h:316: error: syntax error at '#' token include/linux/jiffies.h:316: error: parse error before "Current" include/linux/jiffies.h:316: error: syntax error at '#' token include/linux/jiffies.h:316: error: parse error before "Current" . . . . include/linux/jiffies.h:389: error: syntax error at '#' token include/linux/jiffies.h:389: error: parse error before "Current" include/linux/jiffies.h:417:6: missing binary operator before token "#" --------------- The error messages are so long. What's the problem?? Is it a compiler problem?? Thank you.

2 1

转发: segment fault for fiasco-ux
by halo.duan 20 Dec '06

20 Dec '06

Hi the linux kernel is 2.6.15-1.2054-FC5, gcc is 4.1.0 20060304. code is the latest update. following is screen copy of gdb Fiasco-UX on Linux 2.6.15-1.2054_FC5 (i686) Mapped 64 MB Memory + 0 KB Framebuffer + 0 MB Input Area on FD 6 Loading Module 0x00090000-0x00099380 [sigma0] Loading Module 0x00120000-0x002b09e4 [roottask] Bootstrapping... Welcome to Fiasco(ux)! DD-L4(v2)/x86 microkernel (C) 1998-2006 TU Dresden Rev: Fri Dec 8 18:40:04 2006 compiled with gcc 4.1.0 for Intel Pentium III Detaching after fork from child process 2486. Program received signal SIGSEGV, Segmentation fault. Dirq::alloc (this=0xd242d, t=0xd7b80, ack_in_kernel=-1) at /home/halo/l4/kernel/fiasco/src/drivers/ux/processor-ux.cpp:62 62 asm volatile ("cli" : : : "memory"); (gdb) according to the fiasco-ux documents, the SIGSEGV must be handled by fiasico registered handler. but I don't know why fiasco generate such enomous number of SYSSEGV. so what's happened best regards On 12/11/06, halo.duan <halo.duan(a)huawei.com> wrote: > > > -----邮件原件----- > 发件人: l4-hackers-bounces(a)os.inf.tu-dresden.de > [mailto:l4-hackers-bounces@os.inf.tu-dresden.de] 代表 Udo A. Steinberg > 发送时间: 2006年12月11日 15:22 > 收件人: l4-hackers(a)os.inf.tu-dresden.de > 主题: Re: segment fault for fiasco-ux > > On Mon, 11 Dec 2006 09:08:13 +0800 halo.duan (HD) wrote: > > HD> I am newbie for L4 and just downloaded the fiasco last week. > HD> as i compiled as ux and run fiasco hello stuff. loading of sigma0 > HD> and roottask and irq0 is ok. but nothing displayed. as i use > HD> strace attach > the fiasco > HD> process, it shown full screen segment fault. only think i can do is > "kill > HD> -9 PID". > HD> any sugestion? > > What tools did you use to build Fiasco-UX (gcc, binutils, glibc)? Also > your globalconfig.out would be helpful as well putting up a tarball of > your built binaries on the web somewhere. > > - Udo > > >

2 3

Compilation of L4Linux, problems with make
by Dave Haddon 20 Dec '06

20 Dec '06

Hi all, I am having problems trying to build the L4Linux kernel, has anyone seen the problem shown? -bash-2.05b# pwd /fiasco_part/src/l4linux-2.6 -bash-2.05b# make CHK include/linux/version.h CHK include/linux/utsrelease.h CHK include/linux/compile.h dnsdomainname: Host name lookup failure GEN .version CHK include/linux/compile.h dnsdomainname: Host name lookup failure UPD include/linux/compile.h CC init/version.o LD init/built-in.o LD .tmp_vmlinux1 ld: cannot find -lrtc make: *** [.tmp_vmlinux1] Error 1 -bash-2.05b# I have tried to search for an error, but to be honest , I'm lost... Please help? Thanks, Dave

2 3

AW: L4Linux on L4Ka::Pistachio
by Christian, Martin, OPEE45 18 Dec '06

18 Dec '06

Thanks a lot Adam! I'll think about which road to take during Christmas. Nice holidays, Martin. -----Ursprüngliche Nachricht----- Von: l4-hackers-bounces(a)os.inf.tu-dresden.de [mailto:l4-hackers-bounces@os.inf.tu-dresden.de] Im Auftrag von Adam Lackorzynski Gesendet: Samstag, 16. Dezember 2006 00:10 An: l4-hackers(a)os.inf.tu-dresden.de Betreff: Re: L4Linux on L4Ka::Pistachio Hi, On Fri Dec 15, 2006 at 10:11:14 +0100, Christian, Martin, OPEE45 wrote: > >> a) Is the L4Env required for running L4Linux? > > Yes but that's no strict requirement. > How much time would it probably take, to adjust L4Linux without L4Env to > the L4 Interface of Pistachio? Did anybody try this? Something like this is in 2.4. I do not think this is particularly hard. The concepts are the same. One needs to get some memory from somewhere, start tasks somewhere, etc. I don't see big obstacles. > >> e) If Fiasco would be running on PowerPC, would it be possible > >> to run L4Linux without changes? > > If one wants to have binary compatibility then some PPC code needs > > to be there. And then that would not be the way I'm currently doing > > things. > As far as I understood Michael Hohmuths Diplomarbeit, all Hardware > access from Linux is replaced by sycalls to L4. Is that still the case? I'd rather they that it's adapted to run in user-level, using L4. Some of the instructions cannot be executes on user-level, they're replaced, or removed, or whatever. > And so far only the IA32 part of Linux is changed that way, isn't it? So L4Linux is also running on ARM. > I would basically need to rewrite the PowerPC architecture part of > Linux, basically. Isn't it the way things are supposed to be done? Basically yes but all the architecture independant code is already there, and two example architectures. Adam

1 0

Fail to compile Linux kernel on L4Linux
by Jugwan Eom 16 Dec '06

16 Dec '06

Hi, I tried compiling Linux (not L4Linux) kernel on L4Linux. But unhandled page fault was generated during compiling. I use the ubuntu breezy as a root partition. This is the log. ------------------------ L4 Bootstrapper Scaning (nd)/l4/fiasco_org/fiasco -nowait -nokdb -serial_esc -comport 1 Scaning (nd)/l4/bin_org/sigma0 Scaning (nd)/l4/bin_org/roottask Relocated mbi to [0x5f000-0x5f6d0] Loading (nd)/l4/fiasco_org/fiasco Loading (nd)/l4/bin_org/sigma0 Loading (nd)/l4/bin_org/roottask find kernel info page... found kernel info page at 0x1000 API Version: (87) experimental Sigma0 config ip:00094be0 sp:00105100 Roottask config ip:00120000 sp:00108528 [00001000-00002000) (nd)/l4/fiasco_org/fiasco [00002000-00051dc0) (nd)/l4/fiasco_org/fiasco [00051dc0-00059bd0) (nd)/l4/fiasco_org/fiasco [0005a000-0005d4de) (nd)/l4/fiasco_org/fiasco [0005d4e0-0005f000) (nd)/l4/fiasco_org/fiasco [00090000-000993a4) (nd)/l4/bin_org/sigma0 [0009f000-00100000) BIOS area [00100000-00108764) bootstrap [00120000-00133670) (nd)/l4/bin_org/roottask [00134000-0013e87e) (nd)/l4/bin_org/roottask [0013f880-002bda14) (nd)/l4/bin_org/roottask [00300000-00301980) (nd)/l4/fiasco_org/fiasco [00302000-0038f408) (nd)/l4/fiasco_org/fiasco [02000000-028bbb08) Modules Memory [2fffc000-ffffffff) Deep Space Starting kernel (nd)/l4/fiasco_org/fiasco at 003007e8 Welcome to Fiasco(ia32)! DD-L4(v2)/x86 microkernel (C) 1998-2006 TU Dresden Rev: Sun Dec 3 20:42:26 2006 compiled with gcc 3.4.6 for Intel Pentium 4 Performance-critical config option(s) detected: CONFIG_ASSEMBLER_IPC_SHORTCUT is off CONFIG_NDEBUG is off CONFIG_NO_FRAME_PTR is off Enabling special fully nested mode for PIC Found Local APIC version 0x14 id 0x00 APIC ESR value before/after enabling: 00000000/00000000 Using the Local APIC timer on vector 3d (Periodic Mode) for scheduling SERIAL ESC: allocated IRQ 4 for serial uart SERIAL ESC: allocated IRQ 4 for serial uart Not using serial hack in slow timer handler. Absolute KIP Syscalls using: Sysenter CPU: GenuineIntel (F:1:2:8) Model: Pentium 4 (Willamette/Foster) at 1513 MHz 64 Entry I TLB (4K or 4M pages) 64 Entry D TLB (4k or 4M pages) 12K µ-ops T Cache (8-way associative) 8 KB L1 D Cache (4-way associative, 64 bytes per line) 256 KB L2 U Cache (8-way associative, 64 bytes per line) Freeing init code/data: 20480 bytes (5 pages) SIGMA0: Hello! KIP @ 1000 Found Fiasco: KIP syscalls: yes allocated 4kB for maintainance structures Roottask. Command line found: "(nd)/l4/bin_org/roottask" 786031kB ( 767MB) total RAM (reported by bootloader) 718912kB ( 703MB) received RAM from Sigma0 9388kB ( 10MB) reserved RAM for RMGR Received I/O ports 0000-ffff Attached irqs = [ <!0> 1 <!2> 3 <!4> 5 6 7 8 9 A B C D E F ] Roottask: Loading 10 modules. #05: loading "(nd)/l4/bin_org/events" from [02130000-02175a9a] to [01540000-015491e4][0154a000-0154c934] entry at 0005a370 via trampoline page code symbols at [2c3fe000-2c400000] (8kB), lines at [2c3f7000-2c3fe000] (28kB) #06: loading "(nd)/l4/bin_org/names --events" from [02176000-021b7e64] to [002d0000-002d614a][002d7000-002e3000] entry at 0005b378 via trampoline page code symbols at [2c3f5000-2c3f7000] (8kB), lines at [2c3ef000-2c3f5000] (24kB) #07: loading "(nd)/l4/bin_org/log --prio 0xA1" from [021b8000-021f6961] to [00400000-00406c4a][00407000-00439890] entry at 0005c378 via trampoline page code symbols at [2c3ed000-2c3ef000] (8kB), lines at [2c3e7000-2c3ed000] (24kB) #08: loading "(nd)/l4/bin_org/dm_phys --events" from [021f7000-02283b76] to [01500000-01511faa][01512000-0151c000] entry at 0005d37c via trampoline page code symbols at [2c3e2000-2c3e7000] (20kB), lines at [2c3d5000-2c3e2000] (52kB) #09: loading "(nd)/l4/bin_org/simple_ts -t 800 --events" from [02284000-022d076b] to [01400000-014086aa][01409000-0141b070] entry at 0005e384 via trampoline page code symbols at [2c3d3000-2c3d5000] (8kB), lines at [2c3cc000-2c3d3000] (28kB) #0a: loading "(nd)/l4/bin_org/rtc" from [022d1000-02302cd8] to [01080000-010841e0][01085000-0108a000] entry at 0006036c via trampoline page code symbols at [2c3ca000-2c3cc000] (8kB), lines at [2c3c5000-2c3ca000] (20kB) #0b: loading "(nd)/l4/bin_org/l4io --noirq" from [02303000-02551e7b] to [00b80000-00ba291c][00ba3000-00c0e000] entry at 00061378 via trampoline page code symbols at [2c376000-2c3c5000] (316kB), lines at [2c35c000-2c376000] (104kB) #0c: loading "(nd)/l4/bin_org/tftp -i" from [02552000-0264e6ab] to [01000000-01027dd4][01028000-01061000] entry at 00062370 via trampoline page code symbols at [2c355000-2c35c000] (28kB), lines at [2c337000-2c355000] (120kB) #0d: loading "(nd)/l4/bin_org/con --l4io --events" from [0264f000-027e017c] to [00b00000-00b4d040][00b4e000-00b79000] entry at 0006337c via trampoline page code symbols at [2c32a000-2c337000] (52kB), lines at [2c2f5000-2c32a000] (212kB) #0e: loading "(nd)/l4/bin_org/loader --events (nd)/l4/bin_org/run (nd)/l4/cfg/l4lx26_hd_org.cfg" from [027e1000-028bbb08] to [01300000-01324630][01325000-0134f000] entry at 000643ac via trampoline page code symbols at [2c2ee000-2c2f5000] (28kB), lines at [2c2d5000-2c2ee000] (100kB) names | Starting thread listening for `exit' events simplets| Configured for 800 tasks. rtc | Date:06.12.2006 Time:14:06:47 con | Using fast memcpy. io | do_args(): Disabling internal IRQ handling. io | CPU supports 8 MTRRs. Allocated: io | 0: 00000000-20000000 ( 512MB) type WB io | 1: 20000000-30000000 ( 256MB) type WB io | 2: f8000000-fc000000 ( 64MB) type WC io | PCI: Using configuration type 1 io | PCI: Probing PCI hardware io | PCI: Probing PCI hardware (bus 00) io | PCI: Enabled i801 SMBus device io | Transparent bridge - Intel Corporation 82801 PCI Bridge io | PCI: No IRQ known for interrupt pin B of device 00:1f.3. Please try u io : sing pci=biosirq. io | 00000000-ffffffff : PCI mem io | ed000000-ed0fffff : Intel Corporation 82557/8/9 [Ethernet Pro 100] io | ed800000-ed800fff : Intel Corporation 82557/8/9 [Ethernet Pro 100] io | ee000000-efdfffff : PCI Bus #01 io | ee000000-eeffffff : nVidia Corporation NV18 [GeForce4 MX 440 AGP io : 8x] io | eff00000-f7ffffff : PCI Bus #01 io | f0000000-f7ffffff : nVidia Corporation NV18 [GeForce4 MX 440 AGP io : 8x] io | f8000000-fbffffff : Intel Corporation 82845 845 (Brookdale) Chipset io : Host Bridge io | 0000-ffff : PCI IO io | 0cf8-0cff : PCI conf1 io | a400-a43f : Intel Corporation 82801BA/BAM AC'97 Audio io | a800-a8ff : Intel Corporation 82801BA/BAM AC'97 Audio io | b000-b01f : Intel Corporation 82801BA/BAM USB (Hub #2) io | b400-b41f : Intel Corporation 82801BA/BAM USB (Hub #1) io | b800-b80f : Intel Corporation 82801BA IDE U100 io | d800-d83f : Intel Corporation 82557/8/9 [Ethernet Pro 100] io | e800-e80f : Intel Corporation 82801BA/BAM SMBus con | Character size is 8x14, font has 256 characters con | VESA reports 800x600@16 1600bpl (039f) [65536kB] con | Color mapping: red=11:5 green=5:6 blue=0:5 res=0:0 con | No supported accelerated graphics card detected io | Remapping I/O memory f0000000-f4000000 cached io | Setting MTRR 3 to f0000000-f4000000 type WC con | Mapped I/O video mem f0000000 => 08000000+000000 [65536kB] via l4io con | Using MMXEXT for colorspace transform tftp | NICs supported: E1000, EEPRO100, NE2000/PCI, PCNET32/PCI, RTL8139, tftp | Tulip, VIA 86C100 con | L4INPUT: !!! W A R N I N G !!! con | L4INPUT: Please, do not use Fiasco's "-esc" with L4INPUT. con | L4INPUT: !!! W A R N I N G !!! con | L4INPUT: Registered 0xb03c50 for callbacks. tftp | Found eepro100 tftp | Ethernet addr: 00:03:47:AF:0A:EF con | serio: i8042 AUX port at 0x60,0x64 irq 12 con | serio: i8042 KBD port at 0x60,0x64 irq 1 tftp | Address: 141.223.121.156 Netmask: 255.255.255.0 tftp | Server: 141.223.121.59 Gateway: 141.223.121.99 con | input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 con | input: AT Raw Set 2 keyboard on isa0060/serio0 con | input: PC Speaker con | input: L4 input event injector con | L4 input event injector: IRQ handler up con | connect "ImExPS/2 Generic Explorer Mouse", isa0060/serio1/input0 con | connect "AT Raw Set 2 keyboard", isa0060/serio0/input0 con | connect "PC Speaker", isa0061/input0 con | connect "L4 input event injector", l4/sys con | Running as D.02. Video mode is 800x600@16. tftp | Loading (nd)/l4/bin_org/run [292kB] loader | "(nd)/l4/bin_org/run" needs libld-l4.s.so loader | Setting libpath to (nd)/l4/bin_org/ loader | run: Starting application using libld-l4.s.so loader | run,#f: Loading binary tftp | Loading (nd)/l4/bin_org/libld-l4.s.so [483kB] loader | run,#f: Loading ldso loader | Capability support not supported. loader | run,#f: Starting libld-l4.s.so at 00013890 via 0000cc7c tftp | Loading (nd)/l4/cfg/l4lx26_hd_org.cfg [1kB] loader | sleeping for 2000 ms tftp | File not found: "./libloader.s.so" tftp | Loading (nd)/l4/bin_org//./libloader.s.so [652kB] tftp | Loading (nd)/l4/lx_org/vmlinuz26 [14007kB] loader | vmlinuz26: Starting application using libld-l4.s.so loader | vmlinuz26,#10: Loading binary tftp | Loading (nd)/l4/bin_org/run [292kB] con | vc_loop(): vc[1] running as D.08 con | vc_open_out(): vc[1] 800x600@16, gmode:0x25 run | contxt_init(): 800x582, cols:100, lines:41, sb_lines:1041 tftp | Loading (nd)/l4/bin_org/libld-l4.s.so [483kB] loader | vmlinuz26,#10: Loading ldso loader | Capability support not supported. loader | vmlinuz26,#10: Starting libld-l4.s.so at 00013890 via 0000cc70 tftp | File not found: "./libloader.s.so" tftp | Loading (nd)/l4/bin_org/./libloader.s.so [652kB] tftp | File not found: "vmlinuz26" tftp | TFTP error 1 tftp | File not found: "(nd)/l4/bin_org/vmlinuz26" l4lx | ======> L4Linux 2.6 starting... <======== l4lx | Linux version 2.6.18-l4 (zugwan@ubuntu) (gcc version 4.1.2 20060928 ( l4lx : prerelease) (Ubuntu 4.1.1-13ubuntu5)) #1 Wed Dec 6 19:42:58 KST 2006 l4lx | Binary name: vmlinuz26 l4lx | Kernel command line (2 args): mem=512M root=/dev/hda1 l4lx | Image: 00400000 - 0070a000 [3112 KiB]. l4lx | Areas: Text: 00400000 - 0061f000 [2172kB] (a bit longer) l4lx | Data: 0061f000 - 00660824 [262kB] l4lx | Initdata: 00664000 - 00696000 [200kB] l4lx | BSS: 00698000 - 00708a20 [450kB] l4lx | l4lx_thread_create: Created thread 10.03 (server) l4lx | main thread will be 10.03 l4lx | l4env_register_pointer_section: addr = 00662000 size = 217088 l4lx | sec-w-init: virt: 0x00662000 to 0x00696fff [212 KiB] l4lx | sec-w-init: Number of physical regions: 1, 217088 Bytes l4lx | sec-w-init: 1: Phys: 0x01562000 to 0x01597000, Size: 217088 l4lx | l4env_linux_startup thread 3. l4lx | main thread: received startup message. l4lx | Main thread running, waiting... l4lx | setup_l4env_memory: Forcing superpages for main memory l4lx | Main memory size: 512MB l4lx | Main memory: virt: 0x00800000 to 0x207fffff [524288 KiB] l4lx | Main memory: Number of physical regions: 1, 536870912 Bytes l4lx | Main memory: 1: Phys: 0x01800000 to 0x21800000, Size: 536870912 l4lx | Filling lower ptabs... l4lx | Done (1139 entries). l4lx | l4lx_thread_create: Created thread 10.04 (timer.i0) l4lx | l4lx_thread_create: Created thread 10.05 (Idler) l4lx | Starting L4FB via CON con | vc_loop(): vc[2] running as D.09 l4lx | l4lx_thread_create: Created thread 10.06 (L4ConInput) con | vc_open_out(): vc[2] 800x600@16, gmode:0x25 l4lx | l4fbcon: 800x582 2bypp, size: 947200 l4lx | l4lx_thread_create: Created thread 10.07 (CON refresher) l4lx | l4lx_thread_create: Created thread 10.08 (IRQ14) l4lx | l4lx_thread_create: Created thread 10.09 (IRQ15) l4lx | l4lx_thread_create: Created thread 10.0a (IRQ5) l4lx | L4RM: [PF] write at 0x6b3da310, ip 00446f79, src 10.02 l4lx | [10.0] l4rm/lib/src/pagefault.c:78:__unknown_pf(): l4lx | unhandled page fault --PANIC, 'g' for exit------------------------------------IP: a00b634d (10.00) jdb: bt thread=10.02 backtrace (thread 10.02, fp=afeffcdc, pc=004017de): #1 afeffcdc 004017de #2 afeffd8c 0040207b #3 afeffdb8 00400d32 #4 afeffe5c 00400e24 #5 afefff7c 004027ad #6 afefffbc a00b88ea : __startup_main + 0x4a /home/zugwan/TUDOS/l4/pkg/l4env/lib/src/startup.c:78 #7 afefffec a00acb2c : l4th_thread_start + 0x7c /home/zugwan/TUDOS/l4/pkg/thread/lib/src/create.c:74 #8 afeffffc a00afd36 : l4th_thread_entry + 0x16 /home/zugwan/TUDOS/l4/pkg/thread/lib/src/l4.c:93 --kernel-bt-follows-- #0 c040176c f00068c0 #1 c040176c f000d92a #2 c04017c8 f000f33a #3 6b3da032 f002a383 (10.00) jdb: ---------------------------------- Is there any one give me an advice or has experienced this? Best regards, -- Jugwan Eom

2 6

missing l4exec
by halo.duan 15 Dec '06

15 Dec '06

Hi all I check out latest fiasco and l4linux-2.6-env and built it successful. but I find l4exec bin no where. I read Makefile of the l4/pkg/exec directory find it get no l4exec target(include instead) , so i change the target to l4exec. It's failed to build. so what happened. It need not l4exec any more or something error in my build environment or binutil. my system is linux-2.6.15 and gcc version is 4.0.1 best regards.

2 1

Wiki for updates
by Shakthi Kannan 15 Dec '06

15 Dec '06

Hi, I was wondering if it is possible to install any wiki for l4 hackers to update the documentation. Most of the documentation is outdated or it doesn't work with currenct CVS code - hiworld example, for instance: http://os.inf.tu-dresden.de/l4env/doc/html/bid-tut/node3.html Build steps also seem to be different for some of the documentation. Maybe those who are testing CVS code can update the wiki? Any thoughts? SK -- Shakthi Kannan http://www.shakthimaan.com ____________________________________________________________________________________ Any questions? Get answers on any topic at www.Answers.yahoo.com. Try it now.

2 1

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

l4-hackers December 2006