l4-hackers April 2008

l4-hackers@os.inf.tu-dresden.de

16 participants
18 discussions

Back to UTCB IPC
by Marc CHALAND 11 Oct '09

11 Oct '09

Hi, I am back with my problem with UTCB IPC. To sum up the context : I use pure l4env applications. Here is the scenario between my server and my client : 1. client makes an UTCB IPC to manager. Manager does an l4rm_area_reserve, creates a rcv_fpage, creates worker and sends back worker thread id to client. 2. client allocates memory and associated flexpage and sends it to server. 3. UTCB IPC is sent to worker with 3 parameters : - on client side : utcb->values=0xbff00200: arg1=0x2 arg2=… [View More]

4 9

Unable to mount /dev/root
by Igor V. Ruzanov 16 May '08

16 May '08

Hello! I have compiled l4linux under L4Env and have configured it to boot l4linux with root device /dev/sda1 (onto SATA disk drive). Boot process goes fine unless the console (that is provided by l4con module) appears where i can see loading of necessary modules from RAMdisk like ahci.ko, sd.ko, libata.ko and ohter drivers needed for the succesfull mounting of all partitions counted in /etc/fstab. But it seems the system is unable to stat /dev/sda1 for moving /dev and then of mounting of … [View More]/sys, /proc and /dev/root. System goes into panic and halts. So i would like to ask you for: 1)How does l4linux must interract with SATA drives? Is it possible to load the modules (ahci.ko, sd.ko, ext3.ko and libata.ko) that were pre-compiled in l4linux source tree? 2)What options of .config must be set up for the successfull 'look' of /dev/sda1 and other partitions living on SATA disk drive? My kernel config was done from arch/l4/configs/x86-native_defconfig and looks like for now: # # Automatically generated make config: don't edit # Linux kernel version: 2.6.24-l4 # Tue Apr 29 16:23:13 2008 # # # L4Linux configuration # CONFIG_L4=y CONFIG_L4_LINUX=y CONFIG_L4_OBJ_TREE="/usr/src/DROPS/tudos/l4/build" CONFIG_L4_L4ENV=y CONFIG_L4_ARCH_X86=y # CONFIG_L4_ARCH_ARM is not set CONFIG_L4_VMLINUZ_SUFFIX="" CONFIG_HZ=100 CONFIG_PHYSICAL_START=0x0 # # L4 build options # CONFIG_L4_MK_CPU_X86="686" # # IRQ Handling # # CONFIG_L4_IRQ_SINGLE is not set CONFIG_L4_IRQ_OMEGA0=y # CONFIG_L4_IRQ_MULTI is not set # # Stub drivers # CONFIG_L4_EXTERNAL_RTC=y # CONFIG_L4_BLK_DRV is not set # CONFIG_L4_PDSPBLK_DRV is not set CONFIG_L4_FB_DRIVER=y # CONFIG_L4_FB_DRIVER_XF86IF is not set # CONFIG_L4_ORE_DRV is not set # CONFIG_L4_SERIAL is not set # # Debugging options # # CONFIG_L4_DEBUG is not set # # Advanced options # CONFIG_L4_L4ENV_MEMSIZE=32 CONFIG_L4_TAMED=y # # Priority configuration # CONFIG_L4_PRIO_SERVER_PROC=64 CONFIG_L4_PRIO_IDLER=65 CONFIG_L4_PRIO_IRQ_BASE=66 CONFIG_L4_PRIO_TAMER=85 CONFIG_L4_PRIO_L4FB_INPUT=70 CONFIG_L4_PRIO_L4FB_REFRESH=70 CONFIG_L4_PRIO_L4ORE=70 # # Monitoring options (ferret) # # CONFIG_L4_FERRET_USER is not set # CONFIG_L4_FERRET_KERNEL is not set # CONFIG_L4_FERRET_SYSCALL_COUNTER is not set # CONFIG_L4_USE_L4VMM is not set CONFIG_L4_CONFIG_CHECKS=y # CONFIG_L4_SAMPLE_MODULE is not set # # # # CONFIG_64BIT is not set CONFIG_X86_32=y # CONFIG_X86_64 is not set CONFIG_X86=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_QUICKLIST=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_CALIBRATE_DELAY=y # CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_SUPPORTS_OPROFILE=y # CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y # CONFIG_AUDIT_ARCH is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_X86_BIOS_REBOOT=y CONFIG_KTIME_SCALAR=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CGROUPS is not set CONFIG_FAIR_GROUP_SCHED=y CONFIG_FAIR_USER_SCHED=y # CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" # # Processor type and features # # CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_SMP is not set CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_X86_VSMP is not set CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_PARAVIRT_GUEST is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set CONFIG_M586TSC=y # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_GENERIC_CPU is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_X86_XADD=y CONFIG_X86_PPRO_FENCE=y CONFIG_X86_F00F_BUG=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_ALIGNMENT_16=y CONFIG_X86_TSC=y CONFIG_X86_MINIMUM_CPU_FAMILY=4 # CONFIG_HPET_TIMER is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_X86_UP_APIC is not set # CONFIG_X86_MCE is not set # CONFIG_VM86 is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_X86_REBOOTFIXUPS is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_3G_OPT is not set # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_2G_OPT is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 # CONFIG_X86_PAE is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_NR_QUICK=1 CONFIG_VIRT_TO_BUS=y # CONFIG_MATH_EMULATION is not set # CONFIG_MTRR is not set CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set # CONFIG_KEXEC is not set # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x100000 CONFIG_COMPAT_VDSO=y # # Power management options # # CONFIG_PM is not set CONFIG_SUSPEND_UP_POSSIBLE=y CONFIG_HIBERNATION_UP_POSSIBLE=y # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # CONFIG_CPU_IDLE is not set # # Bus options (PCI etc.) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set CONFIG_PCI_GOMMCONFIG=y # CONFIG_PCI_GODIRECT is not set # CONFIG_PCI_GOANY is not set CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set CONFIG_ISA_DMA_API=y CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_MISC=y # # Networking # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y # CONFIG_IP_PNP_BOOTP is not set # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set CONFIG_INET_XFRM_MODE_BEET=y # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # # Wireless # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # # CONFIG_ISAPNP is not set # CONFIG_PNPBIOS is not set # CONFIG_PNPACPI is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=m CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=m CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=m CONFIG_CHR_DEV_SCH=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_FC_TGT_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m CONFIG_SCSI_SAS_LIBSAS=m CONFIG_SCSI_SAS_ATA=y # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set CONFIG_SCSI_SRP=m CONFIG_ATA=m # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_AHCI=m # CONFIG_SATA_SVW is not set CONFIG_ATA_PIIX=m CONFIG_SATA_MV=m # CONFIG_SATA_NV is not set # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set # CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CS5535 is not set # CONFIG_PATA_CS5536 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_ATA_GENERIC is not set # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set CONFIG_PATA_MPIIX=m CONFIG_PATA_OLDPIIX=m # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_QDI is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_WINBOND_VLB is not set CONFIG_PATA_PLATFORM=m # CONFIG_MD is not set CONFIG_FUSION=y CONFIG_FUSION_SPI=m CONFIG_FUSION_FC=m CONFIG_FUSION_SAS=m CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m # CONFIG_FUSION_LOGGING is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y # CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set CONFIG_TULIP=y # CONFIG_TULIP_MWI is not set # CONFIG_TULIP_MMIO is not set # CONFIG_TULIP_NAPI is not set # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y # CONFIG_PCNET32_NAPI is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_CS89x0 is not set CONFIG_EEPRO100=y CONFIG_E100=m # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set CONFIG_NE2K_PCI=y # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set CONFIG_E1000E=m # CONFIG_IP1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # # CONFIG_SERIAL_8250 is not set CONFIG_FIX_EARLYCON_MEM=y # # Non-8250 serial port support # # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_NSC_GPIO is not set # CONFIG_CS5535_GPIO is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set # # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_WATCHDOG is not set # # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # # Graphics support # # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_SYS_FOPS is not set CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set # CONFIG_FB_VESA is not set # CONFIG_FB_EFI is not set # CONFIG_FB_HECUBA is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_I810 is not set # CONFIG_FB_LE80578 is not set # CONFIG_FB_INTEL is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_FONT_6x11 is not set # CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set # CONFIG_FONT_ACORN_8x8 is not set CONFIG_FONT_MINI_4x6=y # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y # # Sound # # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # # USB Input Devices # # CONFIG_USB_HID is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_DYNAMIC_MINORS=y # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set CONFIG_USB_MON=y # # USB port drivers # # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # # USB DSL modem support # # # USB Gadget Support # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_VIRTUALIZATION is not set # # Userspace I/O # # CONFIG_UIO is not set # # Firmware Drivers # # CONFIG_EDD is not set # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=m CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y # CONFIG_ZISOFS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # # CONFIG_MSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y # CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set # CONFIG_KPROBES is not set # CONFIG_MARKERS is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y CONFIG_UNUSED_SYMBOLS=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_EARLY_PRINTK is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUG_RODATA is not set # CONFIG_4KSTACKS is not set CONFIG_DOUBLEFAULT=y # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_TWOFISH_586 is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_AES_586 is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y Please don't pay your attention on any Wi-Fi, network and other userland options. I would like to know where i'm wrong with setting up of options related with disk drivers, ATA/SATA subsystems and mayby some kinds of filesystems types. I tried to set up CONFIG_IDE and CONFIG_BLK_DEV_IDE options but they didn't make changes when i use these options with 'm' (with creating of modules) and they gave Unhandled Page Fault /__unknown_pf()/ in case of linking if ide drivers statically into kernel. All of necessary modules are seccusfully including into initrd image during MKINITRD. Thank you for any help! [View Less]

4 17

Unhandled page fault (in __unknown_pf)
by Igor V. Ruzanov 25 Apr '08

25 Apr '08

Hello! There is a problem when vmlinuz-2.6.24-l4 (kernel image compiled in l4linux source tree) boots under l4env with Fiasco u-kernel (last screen page is shown below): l4lx | Got 2048kB of ISA DMA memory l4lx | ISA DMA memory: virt: 0x00800000 to 0x009fffff [2048 KiB] l4lx | ISA DMA memory: Number of physocal regions: 1, 2097152 Bytes l4lx | ISA DMA memory: 1: Phys: 0x0043b000 to 0x0063b000, Size: 2097152 l4lx | Main memory: virt: 0x00c00000 to 0x10bfffff [262144 KiB] l4lx | Main … [View More]memory: Number of physical regions: 1, 26843556 Bytes l4lx | Main memory: 1: Phys: 0x07000000 to 0x17000000, Size: 268435456 l4lx | Filling lower tabs... l4lx | Done (1722 entries). l4lx | l4env_register_pointer_section: addr = 00660000 size = 667648 l4lx | end: virt: 0x00660000 to 0x00702fff [652 KiB] l4lx | Noncontiguous region for end l4lx | end: Number of physical regions: 2, 667548 Bytes l4lx | end: 1: Phys: 0x01251000 to 0x01287000, Size: 221184 l4lx | end: 2: Phys: 0x00ba9000 to 0x00c16000, Size: 446464 l4lx | l4env_rd_path: initrd-2.6.24-l4.img l4lx | Loading: initrd-2.6.24-l4.img l4lx | INITRD: Size of RAMdisk is 3516 KiB l4lx | RAMdisk from 10c00000 to 10f6f200 [3516 KiB] l4lx | L4RM: [PF] read at 0xf0070000, ip 004098d8, src D.02 l4lx | [D.0] l4rm/lib/src/pagefault.c:81:__unknown_pf(): l4lx | unhandled page fault --PANIC, 'g' for exit----------------------------------------------- IP: a00b53a6 [l4lx.rm] (d.00) jdb: [...] OBJDUMP of vmlinux shows the following listing (cutted fragment): 004098a1 <rtc_cmos_read>: rtc_cmos_read(): /usr/src/kernels/2.6-24-l4/arch/l4/kernel/arch-i386/time.c:93 4098a1: 56 push %esi 4098a2: 53 push %ebx 4098a3: 83 ec 04 sub $0x4,%esp 4098a6: 8a 5c 24 10 mov 0x10(%esp),%bl /usr/src/kernels/2.6-24-l4/build/include/asm-l4/l4-arch/asm/irqflags.h:68 4098aa: e8 4a 87 ff ff call 401ff9 <l4x_global_save_flags> 4098af: 89 c6 mov %eax,%esi /usr/src/kernels/2.6-24-l4/build/include/asm-l4/l4-arch/asm/irqflags.h:78 4098b1: e8 4c 88 ff ff call 402102 <l4x_global_cli> /usr/src/kernels/2.6-24-l4/build/include/asm-l4/x86-arch/asm/mc146818rtc_32.h:45 4098b6: 0f b6 d3 movzbl %bl,%edx 4098b9: 89 d1 mov %edx,%ecx 4098bb: 80 cd 01 or $0x1,%ch /usr/src/kernels/2.6-24-l4/build/include/asm-l4/x86-arch/asm/mc146818rtc_32.h:47 4098be: a1 98 23 67 00 mov 0x672398,%eax 4098c3: 85 c0 test %eax,%eax 4098c5: 74 04 je 4098cb <rtc_cmos_read+0x2a> /usr/src/kernels/2.6-24-l4/build/include/asm-l4/l4-arch/asm/processor.h:487 4098c7: f3 90 pause 4098c9: eb f3 jmp 4098be <rtc_cmos_read+0x1d> /usr/src/kernels/2.6-24-l4/build/include/asm-l4/x86-arch/asm/cmpxchg_32.h:137 4098cb: 0f b1 0d 98 23 67 00 cmpxchg %ecx,0x672398 /usr/src/kernels/2.6-24-l4/build/include/asm-l4/x86-arch/asm/mc146818rtc_32.h:51 4098d2: 85 c0 test %eax,%eax 4098d4: 75 e8 jne 4098be <rtc_cmos_read+0x1d> /usr/src/kernels/2.6-24-l4/build/include/asm-l4/l4-arch/asm/io.h:359 4098d6: 88 d0 mov %dl,%al (***) 4098d8: e6 70 out %al,$0x70 /usr/src/kernels/2.6-24-l4/build/include/asm-l4/l4-arch/asm/io.h:273 4098da: e6 80 out %al,$0x80 [...] We can see that the instruction at (***) causes the fault of executing. I have no idea why it makes the problem. I've compared same part of object code of usual kernel (2.6.24.5 that working in 'real' environment) - there was the same semantics of the function rtc_cmos_read(). Below i provide grub.list section about loading l4linux module: title Red Hat Enterprise Linux Server (2.6.24-l4, very EXPERIMENTAL) root (hd0,0) kernel /boot/l4/linux/bin/bootstrap modaddr 0x06000000 module /boot/l4/linux/bin/fiasco -nokdb -serial_esc module /boot/l4/linux/bin/sigma0 module /boot/l4/linux/bin/roottask task modname "bmodfs" attached 5 modules module /boot/l4/linux/bin/names module /boot/l4/linux/bin/log module /boot/l4/linux/bin/dm_phys --isa=0x00800000 module /boot/l4/linux/bin/simple_ts -t 300 module /boot/l4/linux/bin/l4io --noirq module /boot/l4/linux/bin/con module /boot/l4/linux/bin/bmodfs module /boot/l4/linux/cfg/l4linux26.cfg module /boot/l4/linux/bin/libloader.s.so module /boot/l4/linux/bin/libld-l4.s.so module /boot/vmlinuz-2.6.24-l4 module /boot/initrd-2.6.24-l4.img module /boot/l4/linux/bin/loader --fprov=BMODFS l4linux26.cfg [...] All the stuff was compiled under RHEL5 with kernel-2.6.24-5 (SMP). Version of gcc compiler is 4.1.1 20070105 (Red Hat 4.1.1-52) [gcc -v] with POSIX thread model. My hardware is: - mainboard is DG33TL; - CPU Intel Pentium Dual-Core; - RAM 2048Mb I tried to load l4linux-module in cores-multiplexed enabled (for SMP) and cores-multiplexed disabled CPU modes, that i was tuning them on/off in BIOS setup. Any help is very welcomed! [View Less]

2 1

some question about serial package
by Ding ying 22 Apr '08

22 Apr '08

Hi,everyone. In l4/pkg/,there is a serial package about operate on serial port under L4/fiasco.But I couldn't run it propery on my machine.From adding some test sentence,I found the programme will dead in serial/lib/src/client.c 115 sentence:l4_ipc_wait(),but before dead,it could do two run in:l_recv<--->goto l_recv part.I mean the l4_ipc_wait() could get two message and do the relevant work,but when goto third run,it dead,and client invoking function also dead.I can't find … [View More]

2 1

Fiasco compilation with ubuntu
by Marc CHALAND 17 Apr '08

17 Apr '08

Hi, I get problem with our version of ubuntu to compile fiasco. date doesn't work exactly in a same manner as gentoo and debian. It adds "(+02.00)" at the end of output which disturbs make process. Here is the patch that we use. It works on debian and gentoo also. Regards Marc

3 3

compile error
by 盛淑蕙 14 Apr '08

14 Apr '08

Hi, I have downloaded the fiasco,l4linux and l4env as following ./repomgr co fiasco ./repomgr co hello ./repomgr co l4linux2.6-env svn co http://svn.tudos.org/repos/l4linux/trunk l4linux-2.6 It is failed to compile during building the loader package. === Building lib of "loader" === PWD=/usr/l4/pkg/loader make -C loader lib -o include -o idl make[2]: Entering directory `/usr/l4/l4/pkg/loader' test -f lib/broken -o -f lib/obsolete || \ if [ -f lib/Makefile ] ; then … [View More]PWD=/usr/l4/pkg/loader/lib make -C lib ; fi make[3]: Entering directory `/usr/l4/l4/pkg/loader/lib' test -f clientlib/broken -o -f clientlib/obsolete || \ if [ -f clientlib/Makefile ] ; then PWD=/usr/l4/pkg/loader/lib/clientlib make -C clientlib ; fi make[4]: Entering directory `/usr/l4/l4/pkg/loader/lib/clientlib' PWD=/usr/l4/build/l4env/pkg/loader/lib/clientlib/OBJ-x86_586-l4v2 make -C /usr/l4/build/l4env/pkg/loader/lib/clientlib/OBJ-x86_586-l4v2 -f Makefile make[5]: Entering directory `/usr/l4/build/l4env/pkg/loader/lib/clientlib/OBJ-x86_586-l4v2' make[5]: Leaving directory `/usr/l4/build/l4env/pkg/loader/lib/clientlib/OBJ-x86_586-l4v2' make[4]: Leaving directory `/usr/l4/l4/pkg/loader/lib/clientlib' test -f runtime/broken -o -f runtime/obsolete || \ if [ -f runtime/Makefile ] ; then PWD=/usr/l4/pkg/loader/lib/runtime make -C runtime ; fi make[4]: Entering directory `/usr/l4/l4/pkg/loader/lib/runtime' PWD=/usr/l4/build/l4env/pkg/loader/lib/runtime/OBJ-x86_586-l4v2 make -C /usr/l4/build/l4env/pkg/loader/lib/runtime/OBJ-x86_586-l4v2 -f Makefile make[5]: Entering directory `/usr/l4/build/l4env/pkg/loader/lib/runtime/OBJ-x86_586-l4v2' ==> Linking to shared libloader.s.so LD_PRELOAD=/usr/l4/build/l4env/tool/gendep/libgendep.so GENDEP_TARGET=libloader.s.so GENDEP_BINARY=ld ld -m elf_i386 \ -o libloader.s.so -shared -T/usr/l4/build/l4env/lib/x86_586/main_rel.ld /usr/l4/build/l4env/lib/x86_586/crt0.s.o helper_dyn.s.o --hash-style=sysv -L/usr/l4/build/l4env/lib/x86_586/l4v2 -L/usr/l4/build/l4env/lib/x86_586 -L/usr/l4/build/l4env/lib -L/usr/l4/drops/lib/x86_586/l4v2 -L/usr/l4/drops/lib/x86_586 -L/usr/l4/drops/lib --whole-archive -lsemaphore.p -lthread.p -ldm_generic.p -ldm_mem.p -lslab.p -ll4env_err.p -ll4rm.p -ll4env.p -llogserver.p -lnames.p -lroot.p -lc_be_l4env_start_stop.p -lc_be_minimal_log_io.p -lc_be_simple_mem.p -lc_be_mmap.p -lc_be_mmap_util.p -luclibc_support.p -lgeneric_ts.p -lgeneric_fprov.p -lloaderif.p -ll4util_root.p -lsigma0.p --no-whole-archive -ll4sys.p -ll4util.p -ul4util_reboot -ugetopt_long /usr/lib/gcc/i486-linux-gnu/4.1.3/libgcc.a ld: cannot find -luclibc_support.p make[5]: *** [libloader.s.so] Error 1 make[5]: Leaving directory `/usr/l4/build/l4env/pkg/loader/lib/runtime/OBJ-x86_586-l4v2' make[4]: *** [/usr/l4/build/l4env/pkg/loader/lib/runtime/OBJ-x86_586-l4v2] Error 2 make[4]: Leaving directory `/usr/l4/l4/pkg/loader/lib/runtime' make[3]: *** [runtime] Error 2 make[3]: Leaving directory `/usr/l4/l4/pkg/loader/lib' make[2]: *** [lib] Error 2 make[2]: Leaving directory `/usr/l4/l4/pkg/loader' make[1]: *** [loader.lib] Error 2 make[1]: Leaving directory `/usr/l4/l4/pkg' make: *** [pkg] Error 2 make: Leaving directory `/usr/l4/l4' my gcc version is 4.1.3 and using xubuntu. Any other packages needed to be installed ? thank you [View Less]

2 2

memory section iguana
by Anand Gore 14 Apr '08

14 Apr '08

Hi, I have a question about memory section in iguana server. I wanted to dynamically load a binary to a specific location e.g. 0x2000000 in my task/thread. Here is the code I have - mnsigned int base_address=0x200000; mm_s memsection_create_fixed(section_size, base_address); if(mm_s != 0) { memcpy(base_address, binary_buffer, sizeof(binary_buffer)); func=(func_t)base_address; func(); } The binary is built and linked to a fixed address 0x2000000, such that there will be … [View More]

1 0

error while compiling the l4.
by l4 08 Apr '08

08 Apr '08

hi all, last time I put a error message to the l4-hacker ,and you send me a mail that ?I have cut away the first error.So I send the full infomations to you when I compiled it.By useing the cpu info,when I compile fiasco I do this: > > -------------------------------------------------- > > || Architecture (AMD64 processor family) ---> > > || Platform (PC platform) ---> > > || CPU (AMD Opteron / Athlon64) ---> > > || for scheduling) --… [View More]-> > > || [*] Enables workaroud for AMD FPU security leak > > --------------------------------------- > > It sames that fiasco OK,but when I compile l4 with the following info: > > --------------------------------------- > > (x86) Target Architecture > > CPU type: "586" > > (L4.Fiasco) ABI > > -------------------------------------- > > errors comes out like this: > > ------------------------------------------------------------------------- > > ... Generating generic_ts-server.c > > CC="gcc -m32" /home/l4/tudos/l4/../dice/src/dice > > --require="3.2.0" -P-DUSE_UCLIBC=y -P-DRAM_BASE=0x0 > > -P-DSYSTEM_x86_l4v2 -P-DARCH_x86 -P-DCPUTYPE_586 -P-DL4API_l4v2 > > -P-DCONFIG_L4_CALL_SYSCALLS -P-DCONFIG_L4_ABS_SYSCALLS > > -P-I/home/l4/tudos/build/include/x86/l4v2 > > -P-I/home/l4/tudos/build/include/l4v2 > > -P-I/home/l4/tudos/build/include/x86 > > -P-I/home/l4/tudos/build/include > > -P-I/home/l4/tudos/l4/../dice/include > > -P-I/home/drops/include/x86/l4v2 -P-I/home/drops/include/l4v2 > > -P-I/home/drops/include/x86 -P-I/home/drops/include -P-nostdinc > > -P-I/home/l4/tudos/build/include/x86/uclibc > > -P-I/home/l4/tudos/build/include/uclibc > > -P-I/home/l4/tudos/build/include/uclibc++ > > -P-I/home/drops/include/x86/uclibc > > -P-I/home/drops/include/uclibc -P-I/home/drops/include/uclibc++ > > -P-I/usr/lib/gcc/x86_64-linux-gnu/4.1.3/include > > -P-I/usr/lib/gcc/x86_64-linux-gnu/4.1.3/include-fixed -Bifiasco > > -Bpia32 -MD /home/l4/tudos/l4/pkg/generic_ts/idl/generic_ts.idl > > In file included > > from /home/l4/tudos/l4/pkg/generic_ts/idl/generic_ts.idl:0, > > from l4/sys/types.h:1: > > /home/l4/tudos/build/include/x86/l4v2/l4/sys/types.h:398.20-29: > > error: value is out of range > > make[4]: *** [generic_ts-server.c] error 1 > > make[4]: Leaving directory > > `/home/l4/tudos/build/pkg/generic_ts/idl/OBJ-x86-l4v2' > > make[3]: *** > > [/home/l4/tudos/build/pkg/generic_ts/idl/OBJ-x86-l4v2] error 2 > > make[3]: Leaving directory > > `/home/l4/tudos/l4/pkg/generic_ts/idl' > > make[2]: *** [idl] error 2 > > make[2]: Leaving directory `/home/l4/tudos/l4/pkg/generic_ts' > > make[1]: *** [generic_ts.headers] error 2 > > make[1]: Leaving directory `/home/l4/tudos/l4/pkg' > > make: *** [pkg] error 2 > > ----------------------------------------------------------------------- > > firstly I think maybe I didn't do the right selecet,then I change it: > > ---------------------------------------------------------- > > (amd64) TargetArchitecture > > CPU type: "k7" > > (L4.Fiasco) > > ------------------------------------------------------------------ > > but there is another errors: > > -------------------------------- > > ... Generating generic_ts-server.c > > CC="gcc -m64" /home/l4/tudos/l4/../dice/src/dice > > --require="3.2.0" -P-DUSE_UCLIBC=y -P-DRAM_BASE=0x0 > > -P-DSYSTEM_amd64_l4v2 -P-DARCH_amd64 -P-DCPUTYPE_k7 > > -P-DL4API_l4v2 -P-DCONFIG_L4_CALL_SYSCALLS > > -P-DCONFIG_L4_ABS_SYSCALLS > > -P-I/home/l4/tudos/build/include/amd64/l4v2 > > -P-I/home/l4/tudos/build/include/l4v2 > > -P-I/home/l4/tudos/build/include/amd64 > > -P-I/home/l4/tudos/build/include > > -P-I/home/l4/tudos/l4/../dice/include > > -P-I/home/drops/include/amd64/l4v2 -P-I/home/drops/include/l4v2 > > -P-I/home/drops/include/amd64 -P-I/home/drops/include > > -P-nostdinc -P-I/home/l4/tudos/build/include/amd64/uclibc > > -P-I/home/l4/tudos/build/include/uclibc > > -P-I/home/l4/tudos/build/include/uclibc++ > > -P-I/home/drops/include/amd64/uclibc > > -P-I/home/drops/include/uclibc -P-I/home/drops/include/uclibc++ > > -P-I/usr/lib/gcc/x86_64-linux-gnu/4.1.3/include > > -P-I/usr/lib/gcc/x86_64-linux-gnu/4.1.3/include-fixed -Bifiasco > > -Bpamd64 -MD /home/l4/tudos/l4/pkg/generic_ts/idl/generic_ts.idl > > In file included > > from /home/l4/tudos/l4/pkg/generic_ts/idl/generic_ts.idl:0, > > from l4/sys/types.h:1, > > > > from /home/l4/tudos/build/include/amd64/l4v2/l4/sys/types.h:185: > > /home/l4/tudos/build/include/l4/sys/__l4_fpage-64bit.h:96.55-65: > > error: value is out of range > > make[4]: *** [generic_ts-server.c] error 1 > > make[4]: Leaving directory > > `/home/l4/tudos/build/pkg/generic_ts/idl/OBJ-amd64-l4v2' > > make[3]: *** > > [/home/l4/tudos/build/pkg/generic_ts/idl/OBJ-amd64-l4v2] error 2 > > make[3]: Leaving directory > > `/home/l4/tudos/l4/pkg/generic_ts/idl' > > make[2]: *** [idl] error 2 > > make[2]: Leaving directory `/home/l4/tudos/l4/pkg/generic_ts' > > make[1]: *** [generic_ts.headers] error 2 > > make[1]: Leaving directory `/home/l4/tudos/l4/pkg' > > make: *** [pkg] error 2 > > ---------------------------------------------------------- I think It can work on AMD64,could you help me?thank you very much! fangzhsh, [View Less]

3 3

Re: error while compiling the l4.
by Martin Pohlack 07 Apr '08

07 Apr '08

Please use the mailing list! Forwarding. l4 wrote: >> You cut away the first error. Post a longer log. >> >> Cheers, >> Martin > > hi Martin, > last time I put a error message to the l4-hacker ,and you send me a mail > that I have cut away the first error.So I send the full infomations to > you when I compiled it.By useing the cpu info,when I compile fiasco I do > this: > -------------------------------------------------- > || … [View More]Architecture (AMD64 processor family) ---> > || Platform (PC platform) ---> > || CPU (AMD Opteron / Athlon64) ---> > || for scheduling) ---> > || [*] Enables workaroud for AMD FPU security leak > --------------------------------------- > It sames that OK,but when I compile l4 with the following info: > --------------------------------------- > (x86) Target Architecture > │ │ CPU type: "586" > │ │ (L4.Fiasco) ABI > -------------------------------------- > errors comes out like this: > ------------------------------------------------------------------------- > ... Generating generic_ts-server.c > CC="gcc -m32" /home/l4/tudos/l4/../dice/src/dice > --require="3.2.0" -P-DUSE_UCLIBC=y -P-DRAM_BASE=0x0 > -P-DSYSTEM_x86_l4v2 -P-DARCH_x86 -P-DCPUTYPE_586 -P-DL4API_l4v2 > -P-DCONFIG_L4_CALL_SYSCALLS -P-DCONFIG_L4_ABS_SYSCALLS > -P-I/home/l4/tudos/build/include/x86/l4v2 > -P-I/home/l4/tudos/build/include/l4v2 > -P-I/home/l4/tudos/build/include/x86 > -P-I/home/l4/tudos/build/include > -P-I/home/l4/tudos/l4/../dice/include > -P-I/home/drops/include/x86/l4v2 -P-I/home/drops/include/l4v2 > -P-I/home/drops/include/x86 -P-I/home/drops/include -P-nostdinc > -P-I/home/l4/tudos/build/include/x86/uclibc > -P-I/home/l4/tudos/build/include/uclibc > -P-I/home/l4/tudos/build/include/uclibc++ > -P-I/home/drops/include/x86/uclibc > -P-I/home/drops/include/uclibc -P-I/home/drops/include/uclibc++ > -P-I/usr/lib/gcc/x86_64-linux-gnu/4.1.3/include > -P-I/usr/lib/gcc/x86_64-linux-gnu/4.1.3/include-fixed -Bifiasco > -Bpia32 -MD /home/l4/tudos/l4/pkg/generic_ts/idl/generic_ts.idl > In file included > from /home/l4/tudos/l4/pkg/generic_ts/idl/generic_ts.idl:0, > from l4/sys/types.h:1: > /home/l4/tudos/build/include/x86/l4v2/l4/sys/types.h:398.20-29: > error: value is out of range > make[4]: *** [generic_ts-server.c] error 1 > make[4]: Leaving directory > `/home/l4/tudos/build/pkg/generic_ts/idl/OBJ-x86-l4v2' > make[3]: *** > [/home/l4/tudos/build/pkg/generic_ts/idl/OBJ-x86-l4v2] error 2 > make[3]: Leaving directory > `/home/l4/tudos/l4/pkg/generic_ts/idl' > make[2]: *** [idl] error 2 > make[2]: Leaving directory `/home/l4/tudos/l4/pkg/generic_ts' > make[1]: *** [generic_ts.headers] error 2 > make[1]: Leaving directory `/home/l4/tudos/l4/pkg' > make: *** [pkg] error 2 > ----------------------------------------------------------------------- > firstly I think maybe I didn't do the right selecet,then I change it: > ---------------------------------------------------------- > (amd64) TargetArchitecture > │ │ CPU type: "k7" │ > │ > │ │ (L4.Fiasco) │ > │ > ------------------------------------------------------------------ > but there is another errors: > -------------------------------- > ... Generating generic_ts-server.c > CC="gcc -m64" /home/l4/tudos/l4/../dice/src/dice > --require="3.2.0" -P-DUSE_UCLIBC=y -P-DRAM_BASE=0x0 > -P-DSYSTEM_amd64_l4v2 -P-DARCH_amd64 -P-DCPUTYPE_k7 > -P-DL4API_l4v2 -P-DCONFIG_L4_CALL_SYSCALLS > -P-DCONFIG_L4_ABS_SYSCALLS > -P-I/home/l4/tudos/build/include/amd64/l4v2 > -P-I/home/l4/tudos/build/include/l4v2 > -P-I/home/l4/tudos/build/include/amd64 > -P-I/home/l4/tudos/build/include > -P-I/home/l4/tudos/l4/../dice/include > -P-I/home/drops/include/amd64/l4v2 -P-I/home/drops/include/l4v2 > -P-I/home/drops/include/amd64 -P-I/home/drops/include > -P-nostdinc -P-I/home/l4/tudos/build/include/amd64/uclibc > -P-I/home/l4/tudos/build/include/uclibc > -P-I/home/l4/tudos/build/include/uclibc++ > -P-I/home/drops/include/amd64/uclibc > -P-I/home/drops/include/uclibc -P-I/home/drops/include/uclibc++ > -P-I/usr/lib/gcc/x86_64-linux-gnu/4.1.3/include > -P-I/usr/lib/gcc/x86_64-linux-gnu/4.1.3/include-fixed -Bifiasco > -Bpamd64 -MD /home/l4/tudos/l4/pkg/generic_ts/idl/generic_ts.idl > In file included > from /home/l4/tudos/l4/pkg/generic_ts/idl/generic_ts.idl:0, > from l4/sys/types.h:1, > > from /home/l4/tudos/build/include/amd64/l4v2/l4/sys/types.h:185: > /home/l4/tudos/build/include/l4/sys/__l4_fpage-64bit.h:96.55-65: > error: value is out of range > make[4]: *** [generic_ts-server.c] error 1 > make[4]: Leaving directory > `/home/l4/tudos/build/pkg/generic_ts/idl/OBJ-amd64-l4v2' > make[3]: *** > [/home/l4/tudos/build/pkg/generic_ts/idl/OBJ-amd64-l4v2] error 2 > make[3]: Leaving directory > `/home/l4/tudos/l4/pkg/generic_ts/idl' > make[2]: *** [idl] error 2 > make[2]: Leaving directory `/home/l4/tudos/l4/pkg/generic_ts' > make[1]: *** [generic_ts.headers] error 2 > make[1]: Leaving directory `/home/l4/tudos/l4/pkg' > make: *** [pkg] error 2 > ---------------------------------------------------------- > I think It can work on AMD64,could you help me?thank you very much! > > > fangzhsh, > > [View Less]

1 0

error while compiling the l4.
by fang zhengshu 06 Apr '08

06 Apr '08

hi all, when I compile the l4 ,errors come out like this : ------------------------------------------------------- $make[4]: *** [generic_ts-server.c] errot 1 $make[4]: Leaving directory `/home/l4/tudos/build/pkg/generic_ts/idl/OBJ-amd64-l4v2' $make[3]: *** [/home/l4/tudos/build/pkg/generic_ts/idl/OBJ-amd64-l4v2] error 2 $make[3]: Leaving directory `/home/l4/tudos/l4/pkg/generic_ts/idl' $make[2]: *** [idl] error 2 $make[2]: Leaving directory `/home/l4/tudos/l4/pkg/generic_ts' $make[1]: *** [… [View More]generic_ts.headers] error 2 $make[1]: Leaving directory `/home/l4/tudos/l4/pkg' $make: *** [pkg] error 2 --------------------------------------------------------- I am now useing ubuntu 8.04,and I change the cpu info when I compile the fiasco & l4, my leader suggest me use qemu to use debian4.0. does the fiasco support the ubuntu8.04?and i put the cpuinfo following. anyone help me ?thank you! cpuinfo: l4@ubuntu:~/tudos/kernel/fiasco$ cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 107 model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping : 2 cpu MHz : 2200.110 cache size : 512 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch bogomips : 4403.59 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc 100mhzsteps processor : 1 vendor_id : AuthenticAMD cpu family : 15 model : 107 model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping : 2 cpu MHz : 2200.110 cache size : 512 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch bogomips : 4400.24 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc 100mhzsteps [View Less]

3 2

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

l4-hackers April 2008