- l4-hackers - example.com Site

C++ templates
by Tiago Jorge 16 Mar '05

16 Mar '05

hello again... Could somebody tell me if to use C++ custoum templates i must use the stdlibc++? thanks in advance Tiago J.

4 9

Problem loading a module added to drops-rd
by Leon Brits 14 Mar '05

14 Mar '05

Hi all, I added a kernel module to the drops-rd ramdisk, but when I 'insmod' it I get the error: Floating point exception. I did enable kernel loadable modules without versions in the L4Linux kernel config. (Using l4linux-2.4.28) Any ideas why - and how to resolve this? Thanks Leon

3 2

stdlibc++ and exceptions
by Tiago Jorge 10 Mar '05

10 Mar '05

is there any way of turning off the exceptions in the port of the C++ lib? or just do it in the STL? thanks Tiago

1 0

how to port stdc++ ?
by Andrushka 09 Mar '05

09 Mar '05

I'm trying to port by self libstdc++. Please say me what is necessary steps compleat to build libstdc++.a ? I'm explored next: 1. Download stdc++ from GNU archives. 2. Modify config.sub (add drops target) 3. Modify configure add *-*-drops*) os_include_dir="os/generic" ;; 4. run ./configure --target=drops --host=i486-pc-linux 5. run make make all-target-libiberty all-target-libstdc++-v3 Please! Write in steps what are you doing to succesful build libstdc++ for L4Env!!! What changes and additions you made to raw libstdc++ sources? Maybe there are any guide ? Thanks.

2 1

C++ and dielibc
by Tiago Jorge 09 Mar '05

09 Mar '05

hello... I've officialy gave up of porting L4vfs to the other libc :-). if i had more time i would do it. Now i'm only trying to use the most basic of C++ and STL. Is there any problem in using C++ + STL with the dielibc? What can't i use or can't i use at all the STL or the C++ stream package? thanks in advance Tiago Jorge

1 0

Second Problem Building L4ENV for L4Linux 2.6.10
by Dennis Newbold 09 Mar '05

09 Mar '05

Dear L4 Hackers, Following the instructions on the L4Linux website, I did a cvs checkout of l4linux-2.6 and l4linux-2.6-env Then, following the "Building" instructions, I cd'd to the l4 directory and typed in "make config", I then selected "Paths and Directories" to /root/drops (I had previously created /root/drops as an empty directory, and chmod'ed it to: chmod 777 drops). I exited "make config", selecting the "save configuration file option. Back in the l4 directory, I then typed in "make". It ran for several minutes, and finally failed trying to find an included file in a file named generic_io.idl. Shown below are the last several lines of make output preceding and relating to this error: -make[3]: Entering directory `/root/l4/pkg/generic_io/idl' PWD=/root/l4/pkg/generic_io/idl/OBJ-x86-l4v2 make -C OBJ-x86-l4v2 -f Makefile make[4]: Entering directory `/root/l4/pkg/generic_io/idl/OBJ-x86-l4v2' ... Generating generic_io-server.c LD_PRELOAD=/root/l4/tool/gendep/libgendep.so GENDEP_TARGET="generic_io-server.c generic_io-server.h generic_io-client.c generic_io-client.h generic_io-sys.h" GENDEP_BINARY=cpp0 GENDEP_DEPFILE=.generic_io.idl.d CC=gcc ../../../../tool/dice/src/dice -fl4types -fserver-parameter -P-DRAM_BASE=0x0 -P-DSYSTEM_x86_l4v2 -P-DARCH_x86 -P-DCPUTYPE_ -P-DL4API_l4v2 -P-I../../../../include/x86/l4v2 -P-I/root/drops/include/x86/l4v2 -P-I../../../../include/l4v2 -P-I/root/drops/include/l4v2 -P-I../../../../include/x86 -P-I/root/drops/include/x86 -P-I../../../../include -P-I/root/drops/include -P-nostdinc -P-DOSKIT -P-I../../../../../oskit10 -P-I../../../../../oskit10/oskit/c -P-I/root/drops/include/oskit10 -P-I/root/drops/include/oskit10/oskit/c -P-I/usr/lib/gcc-lib/i386-redhat-linux/3.3.3/include ../generic_io.idl In file included from ../generic_io.idl:1: dice/dice-corba-types.h:77:26: l4/sys/types.h: No such file or directory could not preprocess input file "../generic_io.idl" (returned 256). dice: 1 Error(s) and 0 Warning(s) occured. make[4]: *** [generic_io-server.c] Error 1 make[4]: Leaving directory `/root/l4/pkg/generic_io/idl/OBJ-x86-l4v2' make[3]: *** [OBJ-x86-l4v2] Error 2 make[3]: Leaving directory `/root/l4/pkg/generic_io/idl' make[2]: *** [idl] Error 2 make[2]: Leaving directory `/root/l4/pkg/generic_io' make[1]: *** [generic_io.headers] Error 2 make[1]: Leaving directory `/root/l4/pkg' make: *** [pkg] Error 2 [root@localhost l4]# I checked everything out of CVS on 2/27/2005, PST (i.e., Loa Angeles, California, USA time), except for a recently modified copy of oskit10/kern/x86/pc/i16/i16_real_int.S, which I retrieved on 3/7/05 at about 9:00 P.M., PST (i.e., Los Angeles, California, USA via "cvs update" I am using Fedora Core 2 Linux. The following is the output from "cat /etc/fedora-release": Fedora Core release 2 (Tettnang) The following is the output from "uname -a" Linux localhost.localdomain 2.6.5-1.358 #1 Sat May 8 09:04:50 EDT 2004 i686 i686 i386 GNU/Linux The following is the output from running oskit10/config.guess: i686-pc-linux-gnu At the time I did all of these things, I was logged in as root, with root privileges. Any help / suggestions will be appreciated. Thank you. Dennis Newbold

2 2

problems building server following mini_http example
by Tiago Jorge 08 Mar '05

08 Mar '05

Hello... As i said in earlier emails, i'm building a L4 server that needs network support. For that purpose, i'm trying to use the libraries from the FLIPS package, using as guideline the mini_http server. i've build my own package and costumized the Makefile to suit my needs. I've changed the mode to l4env_freebsd because i'm using C++ + STL, and i need the headers and the libstdc++.a. I've changed also the needed extra libraries as in the mini_http example. So the Makefile looks like this: ###################################### PKGDIR ?= ../.. L4DIR ?= $(PKGDIR)/../.. TARGET = $(PKGNAME) # the default relocation address. This may be superseded by a STATIC file. DEFAULT_RELOC = 0x01d00000 # list your .c files here SRC_CC = FailureDetector.cc #Mode MODE = l4env_freebsd #systems SYSTEMS = x86-l4v2 # if your server implements the server side of an idl defined in an idl-file # of your package, list the idl file name(s) here (no path needed) #SERVERIDL = CXX_FLAGS = -nostdinc++ \ -I$(L4DIR)/include/g++-3 \ -I$(L4DIR)/include/drops # list additional library paths and libraries here LIBS = -lstdc++ $(GCCLIB) -ldiet_be_socket_io -ll4vfs_net_io -ldiet_be_select -ll4vfs_select -ll4vfs_select_listener-server include $(L4DIR)/mk/prog.mk ##################################### the result when i build my program is the following error: ... Compiling FailureDetector.o LD_PRELOAD=/home/tiago/l4/tool/gendep/libgendep.so GENDEP_TARGET=FailureDetector.o GENDEP_BINARY=cc1plus g++ -c -DRAM_BASE=0x0 -DSYSTEM_x86_586_l4v2 -DARCH_x86 -DCPUTYPE_586 -DL4API_l4v2 -I../../../idl/OBJ-x86-l4v2 -I../../../../../include/x86/l4v2 -I/home/tiago/drops/include/x86/l4v2 -I../../../../../include/l4v2 -I/home/tiago/drops/include/l4v2 -I../../../../../include/x86 -I/home/tiago/drops/include/x86 -I../../../../../include -I/home/tiago/drops/include -nostdinc -DOSKIT -I../../../../../../oskit10/freebsd/libc/include -I../../../../../../oskit10/freebsd/3.x/src/include -I../../../../../../oskit10/freebsd/3.x/src/sys -I../../../../../../oskit10 -I../../../../../include/c++/3.3 -I../../../../../include/c++/3.3/drops -I/home/tiago/drops/include/oskit10 -I/home/tiago/drops/include/oskit10/oskit/freebsd -I/home/tiago/drops/include/c++/3.3 -I/home/tiago/drops/include/c++/3.3/drops -I/usr/lib/gcc-lib/i486-linux/3.3.4/include -gstabs+ -g -O2 -fno-strict-aliasing -march=i586 -Wall /home/tiago/l4/pkg/failuredetector/server/src/FailureDetector.cc -o FailureDetector.o ==> Linking failuredetector LD_PRELOAD=/home/tiago/l4/tool/gendep/libgendep.so GENDEP_TARGET=failuredetector GENDEP_BINARY=ld gcc -o failuredetector ../../../../../lib/x86_586/crt0.o FailureDetector.o -Ttext=0x01d00000 -L../../../../../lib/x86_586/l4v2 -L/home/tiago/drops/lib/x86_586/l4v2 -L../../../../../lib/x86_586 -L/home/tiago/drops/lib/x86_586 -L../../../../../lib -L/home/tiago/drops/lib -L../../../../../../oskit10/lib -L../../../../../lib/c++/3.3 -L/home/tiago/drops/lib/oskit10 -L/home/tiago/drops/lib/c++/3.3 -T../../../../../lib/x86_586/main_stat.ld -lstdc++ /usr/lib/gcc-lib/i486-linux/3.3.4/libgcc.a -ldiet_be_socket_io -ll4vfs_net_io -ldiet_be_select -ll4vfs_select -ll4vfs_select_listener-server -static -loskit10_support_l4env_freebsd.o -ll4env -ll4rm -ldm_generic -ldm_mem -lthread -lsemaphore -lnames -ll4util -lrmgr -ll4env -lomega0 -llogserver -ll4env_err -ll4rm -ldm_generic -ldm_mem -lthread -lslab -ll4sys -nostdlib -Wl,--nostdlib -loskit_freebsd_c -loskit_freebsd_net -loskit_startup -loskit_clientos -loskit_bootp -loskit_linux_fs -loskit_fsnamespace -loskit_diskpart -loskit_linux_dev -loskit10_support_l4env_freebsd_dev -loskit_kern -loskit_lmm -loskit_amm -loskit_freebsd_c -loskit_com /usr/lib/gcc-lib/i486-linux/3.3.4/libgcc.a /usr/lib/gcc-lib/i486-linux/3.3.4/libgcc_eh.a -loskit_freebsd_c -Ttext=0x01d00000 -Wl,-gc-sections ../../../../../lib/x86_586/l4v2/libdiet_be_socket_io.a(socket.o)(.text.get_socket_server_thread+0x8b): In function `setsockopt': /home/tiago/l4/pkg/l4vfs/lib/libc_backends/socket_io/socket.c:687: undefined reference to `l4vfs_init_connection' ../../../../../lib/x86_586/l4v2/libdiet_be_socket_io.a(socket.o)(.text.socket+0xc):/home/tiago/l4/pkg/l4vfs/lib/libc_backends/socket_io/socket.c:673: undefined reference to `ft_get_next_free_entry' ../../../../../lib/x86_586/l4v2/libdiet_be_socket_io.a(socket.o)(.text.socket+0xa3):/home/tiago/l4/pkg/l4vfs/lib/libc_backends/socket_io/socket.c:679: undefined reference to `ft_fill_entry' ../../../../../lib/x86_586/l4v2/libdiet_be_socket_io.a(socket.o)(.text.bind+0x20):/home/tiago/l4/pkg/l4vfs/lib/libc_backends/socket_io/socket.c:684: undefined reference to `ft_is_open' ../../../../../lib/x86_586/l4v2/libdiet_be_socket_io.a(socket.o)(.text.bind+0x33):/home/tiago/l4/pkg/l4vfs/lib/libc_backends/socket_io/socket.c:690: undefined reference to `ft_get_entry' ../../../../../lib/x86_586/l4v2/libdiet_be_socket_io.a(socket.o)(.text.recvfrom+0x3a):/home/tiago/l4/pkg/l4vfs/lib/libc_backends/socket_io/socket.c:690: undefined reference to `ft_is_open' ../../../../../lib/x86_586/l4v2/libdiet_be_socket_io.a(socket.o)(.text.recvfrom+0x4d):/home/tiago/l4/pkg/l4vfs/lib/libc_backends/socket_io/socket.c:692: undefined reference to `ft_get_entry' ../../../../../lib/x86_586/l4v2/libdiet_be_socket_io.a(socket.o)(.text.sendto+0x30):/home/tiago/l4/pkg/l4vfs/lib/libc_backends/socket_io/socket.c:690: undefined reference to `ft_is_open' ../../../../../lib/x86_586/l4v2/libdiet_be_socket_io.a(socket.o)(.text.sendto+0x43):/home/tiago/l4/pkg/l4vfs/lib/libc_backends/socket_io/socket.c:692: undefined reference to `ft_get_entry' ../../../../../lib/x86_586/l4v2/libdiet_be_socket_io.a(socket.o)(.text.setsockopt+0x24):/home/tiago/l4/pkg/l4vfs/lib/libc_backends/socket_io/socket.c:684: undefined reference to `ft_is_open' ../../../../../lib/x86_586/l4v2/libdiet_be_socket_io.a(socket.o)(.text.setsockopt+0x37):/home/tiago/l4/pkg/l4vfs/lib/libc_backends/socket_io/socket.c:690: undefined reference to `ft_get_entry' ../../../../../lib/x86_586/l4v2/libl4env.a(startup.o)(.text+0x19): In function `__startup_main': /home/tiago/l4/pkg/l4env/lib/src/startup.c:62: undefined reference to `main' ../../../../../../oskit10/lib/liboskit_kern.a(base_console_init.o)(.text+0x31c): In function `base_console_init': /home/tiago/oskit10/kern/../kern/x86/pc/base_console_init.c:220: undefined reference to `main' collect2: ld returned 1 exit status make[1]: ** [failuredetector] Erro 1 make[1]: Saindo do diretório `/home/tiago/l4/pkg/failuredetector/server/src/OBJ-x86_586-l4v2' make: ** [OBJ-x86_586-l4v2] Erro 2 But when i build the mini_http example it gives no errors and links some extra libraries that i don't see them defined in any file... My questions are: what am i doing wrong :) ? what extra libraries should i link and how? by the way... following my last email, to how to add extra NIC drivers to FLIPS, it is as simple as said and worked. Just add your drivers the referenced Makefile line and extra modules needed by the driver, in my case crc32 and mii. thanks in advance Tiago Jorge

3 6

l4linux error : no pgtab entry ...?
by Gordon 07 Mar '05

07 Mar '05

Hi I am running l4linux-2.4(2004/12/12) + fiasco(2004/12/12) on an intel pentium 4. When I try to give it access to my hard drive (/dev/hda1) I get the following error: KERNEL: no pgtab entry in sender: from [11]: 000c1000 size: 000c to [26] KERNEL: no pgtab entry in sender: from [11]: 000c1000 size: 000c to [26] KERNEL: no pgtab entry in sender: from [11]: 000c1000 size: 000c to [26] etc When I only give it access to the drops ramdisk, there is no error. My grub script for loading fiasco+l4env: title Fiasco + Con kernel (nd)/fiasco/fiascoG/rmgr -sigma0 task modname "L4Linux task" modaddr 0x02000000 module (nd)/fiasco/fiascoG/fiascoG -nowait -nokdb -nofancy -serial -comspeed 115200 -comport 1 module (nd)/fiasco/fiascoG/sigma0 module (nd)/fiasco/fiascoG/names module (nd)/fiasco/fiascoG/log module (nd)/fiasco/fiascoG/dm_phys module (nd)/fiasco/fiascoG/l4io --noirq module (nd)/fiasco/fiascoG/tftp -i -s 192.168.1.253 module (nd)/fiasco/fiascoG/simple_ts module (nd)/fiasco/fiascoG/l4exec module (nd)/fiasco/fiascoG/name_server module (nd)/fiasco/fiascoG/con --l4io module (nd)/fiasco/fiascoG/loader (nd)/fiasco/fiascoG/con.cfg vbeset 0x117 My script for loading l4linux: verbose 2 modpath "(nd)/fiasco/fiascoG/hdboot" task "vmlinuz.l4env" "root=/dev/hda1 l4irqack=linux" My l4linux .config file: # # Automatically generated by make menuconfig: don't edit # CONFIG_X86=y # CONFIG_SBUS is not set CONFIG_UID16=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # L4Linux options # CONFIG_L4=y # CONFIG_L4_V2 is not set # CONFIG_L4_VX0 is not set # CONFIG_L4_VX2 is not set CONFIG_L4_L4ENV=y CONFIG_L4_MK_FIASCO=y # CONFIG_L4_SMALL is not set # CONFIG_L4_CALL_SYSCALLS is not set # CONFIG_L4_IPC_SYSENTER is not set # CONFIG_L4_TAMED is not set # CONFIG_L4_SUPERCLAN is not set # CONFIG_L4_DROPSCON is not set CONFIG_L4_FB_DRIVER=y # CONFIG_L4_TRACING is not set # CONFIG_L4_IRQ_OMEGA0 is not set CONFIG_L4_L4DIR="/root/DROPS/l4" CONFIG_L4_L4ENV_MEMSIZE=128 # CONFIG_L4_USERPRIV_ONLY is not set # CONFIG_L4_EXTERNAL_RTC is not set # CONFIG_L4_DBG is not set # CONFIG_L4_SMALL_USER is not set # # Loadable module support # CONFIG_MODULES=y # CONFIG_MODVERSIONS is not set CONFIG_KMOD=y # # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMIII is not set CONFIG_MPENTIUM4=y # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_HAS_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_PGE=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_F00F_WORKS_OK=y CONFIG_X86_MCE=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set CONFIG_MICROCODE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y # CONFIG_EDD is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_HIGHMEM is not set # CONFIG_MATH_EMULATION is not set # CONFIG_MTRR is not set # CONFIG_SMP is not set # CONFIG_X86_UP_APIC is not set # CONFIG_X86_UP_IOAPIC is not set # CONFIG_X86_TSC_DISABLE is not set CONFIG_X86_TSC=y # # General setup # CONFIG_NET=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_ISA=y CONFIG_PCI_NAMES=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_HOTPLUG is not set # CONFIG_PCMCIA is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y # CONFIG_OOM_KILLER is not set CONFIG_PM=y # CONFIG_APM is not set # # ACPI Support # # CONFIG_ACPI is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # # CONFIG_PARPORT is not set # # Plug and Play configuration # CONFIG_PNP=y CONFIG_ISAPNP=y # # Block devices # CONFIG_BLK_DEV_FD=y CONFIG_BLK_DEV_XD=y # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_CISS_SCSI_TAPE is not set # CONFIG_CISS_MONITOR_THREAD is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_BLK_STATS is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # CONFIG_BLK_DEV_MD is not set # CONFIG_MD_LINEAR is not set # CONFIG_MD_RAID0 is not set # CONFIG_MD_RAID1 is not set # CONFIG_MD_RAID5 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_BLK_DEV_LVM is not set # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_NETLINK_DEV=m # CONFIG_NETFILTER is not set # CONFIG_FILTER is not set CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set # CONFIG_IPV6 is not set # CONFIG_KHTTPD is not set # # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # # Appletalk devices # # CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_LLC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # # Telephony Support # # CONFIG_PHONE is not set # CONFIG_PHONE_IXJ is not set # CONFIG_PHONE_IXJ_PCMCIA is not set # # ATA/IDE/MFM/RLL support # CONFIG_IDE=y # # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_IDEDISK_STROKE is not set # CONFIG_BLK_DEV_IDECS is not set # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_BLK_DEV_CMD640=y CONFIG_BLK_DEV_CMD640_ENHANCED=y # CONFIG_BLK_DEV_ISAPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_BLK_DEV_GENERIC=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set # CONFIG_BLK_DEV_ADMA100 is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_WDC_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=y CONFIG_AMD74XX_OVERRIDE=y # CONFIG_BLK_DEV_ATIIXP is not set CONFIG_BLK_DEV_CMD64X=y # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_HPT34X_AUTODMA is not set # CONFIG_BLK_DEV_HPT366 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_PDC202XX_BURST is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set CONFIG_BLK_DEV_RZ1000=y # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_SVWKS is not set CONFIG_BLK_DEV_SIIMAGE=y # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_IDE_CHIPSETS is not set CONFIG_IDEDMA_AUTO=y # CONFIG_IDEDMA_IVB is not set # CONFIG_DMA_NONPCI is not set CONFIG_BLK_DEV_ATARAID=y # CONFIG_BLK_DEV_ATARAID_PDC is not set # CONFIG_BLK_DEV_ATARAID_HPT is not set # CONFIG_BLK_DEV_ATARAID_MEDLEY is not set CONFIG_BLK_DEV_ATARAID_SII=y # # SCSI support # CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SD_EXTRA_DEVS=40 # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set CONFIG_SCSI_DEBUG_QUEUES=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_MEGARAID2 is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_VIA is not set # CONFIG_SCSI_SATA_VITESSE is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_NCR53C8XX is not set CONFIG_SCSI_SYM53C8XX=y CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 CONFIG_SCSI_NCR53C8XX_SYNC=20 # CONFIG_SCSI_NCR53C8XX_PROFILE is not set # CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set # CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set # CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_BOOT is not set # CONFIG_FUSION_ISENSE is not set # CONFIG_FUSION_CTL is not set # CONFIG_FUSION_LAN is not set # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # CONFIG_I2O_PCI is not set # CONFIG_I2O_BLOCK is not set # CONFIG_I2O_LAN is not set # CONFIG_I2O_SCSI is not set # CONFIG_I2O_PROC is not set # # Network device support # CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set CONFIG_ETHERTAP=m # CONFIG_NET_SB1000 is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_SUNLANCE is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNBMAC is not set # CONFIG_SUNQE is not set # CONFIG_SUNGEM is not set CONFIG_NET_VENDOR_3COM=y # CONFIG_EL1 is not set # CONFIG_EL2 is not set # CONFIG_ELPLUS is not set # CONFIG_EL16 is not set # CONFIG_EL3 is not set # CONFIG_3C515 is not set # CONFIG_ELMC is not set # CONFIG_ELMC_II is not set CONFIG_VORTEX=y # CONFIG_TYPHOON is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_CS89x0 is not set CONFIG_TULIP=y # CONFIG_TULIP_MWI is not set # CONFIG_TULIP_MMIO is not set # CONFIG_DE4X5 is not set # CONFIG_DGRS is not set # CONFIG_DM9102 is not set CONFIG_EEPRO100=y # CONFIG_EEPRO100_PIO is not set # CONFIG_E100 is not set # CONFIG_LNE390 is not set # CONFIG_FEALNX is not set CONFIG_NATSEMI=y # CONFIG_NE2K_PCI is not set CONFIG_FORCEDETH=y # CONFIG_NE3210 is not set # CONFIG_ES3210 is not set # CONFIG_8139CP is not set CONFIG_8139TOO=y # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set # CONFIG_SIS900 is not set CONFIG_EPIC100=y # CONFIG_SUNDANCE is not set # CONFIG_SUNDANCE_MMIO is not set # CONFIG_TLAN is not set CONFIG_VIA_RHINE=y # CONFIG_VIA_RHINE_MMIO is not set # CONFIG_WINBOND_840 is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Input core support # CONFIG_INPUT=y CONFIG_INPUT_KEYBDEV=y CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_UINPUT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=y # CONFIG_SERIAL_CONSOLE is not set # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_UNIX98_PTYS is not set # # I2C support # # CONFIG_I2C is not set # # Mice # # CONFIG_BUSMOUSE is not set # CONFIG_MOUSE is not set # # Joysticks # # CONFIG_INPUT_GAMEPORT is not set # CONFIG_INPUT_NS558 is not set # CONFIG_INPUT_LIGHTNING is not set # CONFIG_INPUT_PCIGAME is not set # CONFIG_INPUT_CS461X is not set # CONFIG_INPUT_EMU10K1 is not set # CONFIG_INPUT_SERIO is not set # CONFIG_INPUT_SERPORT is not set # CONFIG_INPUT_ANALOG is not set # CONFIG_INPUT_A3D is not set # CONFIG_INPUT_ADI is not set # CONFIG_INPUT_COBRA is not set # CONFIG_INPUT_GF2K is not set # CONFIG_INPUT_GRIP is not set # CONFIG_INPUT_INTERACT is not set # CONFIG_INPUT_TMDC is not set # CONFIG_INPUT_SIDEWINDER is not set # CONFIG_INPUT_IFORCE_USB is not set # CONFIG_INPUT_IFORCE_232 is not set # CONFIG_INPUT_WARRIOR is not set # CONFIG_INPUT_MAGELLAN is not set # CONFIG_INPUT_SPACEORB is not set # CONFIG_INPUT_SPACEBALL is not set # CONFIG_INPUT_STINGER is not set # CONFIG_INPUT_DB9 is not set # CONFIG_INPUT_GAMECON is not set # CONFIG_INPUT_TURBOGRAFX is not set # CONFIG_QIC02_TAPE is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_IPMI_PANIC_EVENT is not set # CONFIG_IPMI_DEVICE_INTERFACE is not set # CONFIG_IPMI_KCS is not set # CONFIG_IPMI_WATCHDOG is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_SCx200 is not set # CONFIG_SCx200_GPIO is not set # CONFIG_AMD_RNG is not set # CONFIG_INTEL_RNG is not set # CONFIG_HW_RANDOM is not set # CONFIG_AMD_PM768 is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=y # CONFIG_AGP_INTEL is not set # CONFIG_AGP_I810 is not set # CONFIG_AGP_VIA is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD_K8 is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_ALI is not set # CONFIG_AGP_SWORKS is not set # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_ATI is not set # # Direct Rendering Manager (XFree86 DRI support) # # CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_OBMOUSE is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # File systems # # CONFIG_QUOTA is not set # CONFIG_QFMT_V2 is not set # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS_RW is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BEFS_DEBUG is not set # CONFIG_BFS_FS is not set CONFIG_EXT3_FS=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_FAT_FS is not set # CONFIG_MSDOS_FS is not set # CONFIG_UMSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set CONFIG_TMPFS=y CONFIG_RAMFS=y CONFIG_ISO9660_FS=y # CONFIG_JOLIET is not set # CONFIG_ZISOFS is not set # CONFIG_JFS_FS is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set # CONFIG_MINIX_FS is not set # CONFIG_VXFS_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_NTFS_RW is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_MOUNT is not set # CONFIG_DEVFS_DEBUG is not set # CONFIG_DEVPTS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_RW is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UDF_FS is not set # CONFIG_UDF_RW is not set # CONFIG_UFS_FS is not set # CONFIG_UFS_FS_WRITE is not set # CONFIG_XFS_FS is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_RT is not set # CONFIG_XFS_TRACE is not set # CONFIG_XFS_DEBUG is not set # # Network File Systems # # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_ROOT_NFS is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set # CONFIG_NFSD_TCP is not set CONFIG_SUNRPC=y CONFIG_LOCKD=y # CONFIG_SMB_FS is not set # CONFIG_NCP_FS is not set # CONFIG_NCPFS_PACKET_SIGNING is not set # CONFIG_NCPFS_IOCTL_LOCKING is not set # CONFIG_NCPFS_STRONG is not set # CONFIG_NCPFS_NFS_NS is not set # CONFIG_NCPFS_OS2_NS is not set # CONFIG_NCPFS_SMALLDOS is not set # CONFIG_NCPFS_NLS is not set # CONFIG_NCPFS_EXTRAS is not set # CONFIG_ZISOFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # CONFIG_SMB_NLS is not set # CONFIG_NLS is not set # # Console drivers # CONFIG_VGA_CONSOLE=y CONFIG_VIDEO_SELECT=y # CONFIG_MDA_CONSOLE is not set # # Frame-buffer support # CONFIG_FB=y CONFIG_DUMMY_CONSOLE=y # CONFIG_FB_RIVA is not set # CONFIG_FB_CLGEN is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_VESA is not set # CONFIG_FB_VGA16 is not set # CONFIG_FB_HGA is not set CONFIG_VIDEO_SELECT=y # CONFIG_FB_MATROX is not set # CONFIG_FB_ATY is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_INTEL is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_IT8181 is not set # CONFIG_FB_VIRTUAL is not set CONFIG_FBCON_ADVANCED=y # CONFIG_FBCON_MFB is not set # CONFIG_FBCON_CFB2 is not set # CONFIG_FBCON_CFB4 is not set # CONFIG_FBCON_CFB8 is not set CONFIG_FBCON_CFB16=y CONFIG_FBCON_CFB24=y CONFIG_FBCON_CFB32=y # CONFIG_FBCON_AFB is not set # CONFIG_FBCON_ILBM is not set # CONFIG_FBCON_IPLAN2P2 is not set # CONFIG_FBCON_IPLAN2P4 is not set # CONFIG_FBCON_IPLAN2P8 is not set # CONFIG_FBCON_MAC is not set # CONFIG_FBCON_VGA_PLANES is not set # CONFIG_FBCON_VGA is not set # CONFIG_FBCON_HGA is not set # CONFIG_FBCON_FONTWIDTH8_ONLY is not set CONFIG_FBCON_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_6x11 is not set # CONFIG_FONT_PEARL_8x8 is not set # CONFIG_FONT_ACORN_8x8 is not set # # Sound # # CONFIG_SOUND is not set # # USB support # # CONFIG_USB is not set # # Support for USB gadgets # # CONFIG_USB_GADGET is not set # # Bluetooth support # # CONFIG_BLUEZ is not set # # Kernel hacking # CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_IOVIRT is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_SPINLOCK is not set CONFIG_FRAME_POINTER=y CONFIG_LOG_BUF_SHIFT=0 # # Cryptographic options # # CONFIG_CRYPTO is not set # # Library routines # # CONFIG_CRC32 is not set # CONFIG_ZLIB_INFLATE is not set # CONFIG_ZLIB_DEFLATE is not set Any ideas? Gordon -- Gordon gjoel123(a)fastmail.fm

2 1

Hacking new NICs into flips
by Tiago Jorge 04 Mar '05

04 Mar '05

Hello... I've been seeing older mails about FLIPS and his drivers. In those mails, was refered the existence of a package to help porting linux drivers using DDE to FLIPS, but that wasn't available in the CVS. Is it already available? If not, how can i "hack" in to flips some new drivers? thanks in advance Tiago Jorge

2 2

Building FLIPS...
by Tiago Jorge 03 Mar '05

03 Mar '05

Hello again. i've told you... today is my day...:) I've downloaded linux 2.4.27 and tried to build it again but... LD_PRELOAD=/home/tiago/l4/tool/gendep/libgendep.so GENDEP_TARGET=server.o GENDEP_BINARY=cc1 gcc -c -DRAM_BASE=0x0 -DSYSTEM_x86_586_l4v2 -DARCH_x86 -DCPUTYPE_586 -DL4API_l4v2 -I../../../idl/OBJ-x86-l4v2 -I../../../../../include/x86/l4v2 -I/home/tiago/drops/include/x86/l4v2 -I../../../../../include/l4v2 -I/home/tiago/drops/include/l4v2 -I../../../../../include/x86 -I/home/tiago/drops/include/x86 -I../../../../../include -I/home/tiago/drops/include -I/usr/lib/gcc-lib/i486-linux/3.3.4/include -gstabs+ -g -O2 -fno-strict-aliasing -march=i586 -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations /home/tiago/l4/pkg/flips/examples/l4lx_flips/server.c -o server.o In file included from /home/tiago/l4/pkg/flips/examples/l4lx_flips/local.h:2, from /home/tiago/l4/pkg/flips/examples/l4lx_flips/server.c:27: ../../../../../include/l4/l4vfs/types.h:76: warning: no semicolon at end of struct or union ../../../../../include/l4/l4vfs/types.h:76: error: parse error before '.' token ../../../../../include/l4/l4vfs/types.h:77: error: parse error before '.' token ../../../../../include/l4/l4vfs/types.h:78: error: parse error before '.' token ../../../../../include/l4/l4vfs/types.h:79: warning: type defaults to `int' in declaration of `l4vfs_stat_t' ../../../../../include/l4/l4vfs/types.h:79: warning: data definition has no type or storage class make[5]: ** [server.o] Erro 1 make[5]: Saindo do diretório `/home/tiago/l4/pkg/flips/examples/l4lx_flips/OBJ-x86_586-l4v2' make[4]: ** [OBJ-x86_586-l4v2] Erro 2 make[4]: Saindo do diretório `/home/tiago/l4/pkg/flips/examples/l4lx_flips' make[3]: ** [l4lx_flips] Erro 2 make[3]: Saindo do diretório `/home/tiago/l4/pkg/flips/examples' make[2]: ** [examples] Erro 2 make[2]: Saindo do diretório `/home/tiago/l4/pkg/flips' make[1]: ** [flips.bin] Erro 2 make[1]: Saindo do diretório `/home/tiago/l4/pkg' make: ** [pkg] Erro 2 i've changed compiler... tried gcc/g++ 2.95 and 3.3 and nothing... whats the bug now?:P Tiago

3 2